Covalently attached monolayers on crystalline hydrogen-terminated silicon: extremely mild attachment by visible light

A very mild method was developed for the attachment of high-quality organic monolayers on crystalline silicon surfaces. By using visible light sources, from 447 to 658 nm, a variety of 1-alkenes and 1-alkynes were attached to hydrogen-terminated Si(100) and Si(111) surfaces at room temperature. The presence and the quality of the monolayers were evaluated by static water contact angles, X-ray photoelectron spectroscopy, and IR spectroscopy. Monolayers prepared by thermal, UV light, or visible light initiation were compared. Additionally, the ability of infrared reflection-absorption spectroscopy to study organic monolayers on silicon was explored. A reaction mechanism is discussed on the basis of investigations of the reaction behavior of 1-alkenes with silicon wafers with varying types and levels of doping. Finally, a series of mixed monolayers derived from the mixed solutions of a 1-alkene and an omega-fluoro-1-alkene were investigated to reveal that the composition of the mixed monolayers was directly proportional to the molar ratio of the two compounds in the solutions.     

Linear nanostructure formation of aldehydes by self-directed growth on hydrogen-terminated silicon(100)

The self-directed growth of organic molecules on silicon surfaces allows for the rapid, parallel production of hybrid organic-silicon nanostructures. In this work, the formation of benzaldehyde- and acetaldehyde-derived nanostructures on hydrogen-terminated H-Si(100)-2x1 surface is studied by scanning tunneling microscopy in ultrahigh vacuum and by quantum mechanical methods. The reaction is a radical-mediated process that binds the aldehydes, through a strong Si-O covalent bond, to the surface. The aldehyde nanostructures are generally composed of double lines of molecules. Two mechanisms that lead to double line growth are elucidated.     

X-ray studies of self-assembled organic monolayers grown on hydrogen-terminated Si(111)

The structure of self-assembled monolayers (SAMs) of undecylenic acid methyl ester (SAM-1) and undec-10-enoic acid 2-bromo-ethyl ester (SAM-2) grown on hydrogen-passivated Si(111) were studied by X-ray reflectivity (XRR), X-ray standing waves (XSW), X-ray fluorescence (XRF), atomic force microscopy, and X-ray photoelectron spectroscopy (XPS). The two different SAMs were grown by immersion of H-Si(111) substrates into the two different concentrated esters. UV irradiation during immersion was used to create Si dangling bond sites that act as initiators of the surface free-radical addition process that leads to film growth. The XRR structural analysis reveals that the molecules of SAM-1 and SAM-2 respectively have area densities corresponding to 50% and 57% of the density of Si(111) surface dangling bonds and produce films with less than 4 angstroms root-mean-square roughness that have layer thicknesses of 12.2 and 13.2 angstroms. Considering the molecular lengths, these thicknesses correspond to a 38 degrees and 23 degrees tilt angle for the respective molecules. For SAM-2/Si(111) samples, XRF analysis reveals a 0.58 monolayer (ML) Br total coverage. Single-crystal Bragg diffraction XSW analysis reveals (unexpectedly) that 0.48 ML of these Br atoms are at a Si(111) lattice position height that is identical to the T1 site that was previously found by XSW analysis for Br adsorbed onto Si(111) from a methanol solution and from ultrahigh vacuum. From the combined XPS, XRR, XRF, and XSW evidence, it is concluded that Br abstraction by reactive surface dangling bonds competes with olefin addition to the surface.     

Reaction of alkenes with hydrogen-terminated and photooxidized silicon surfaces. A comparison of thermal and photochemical processes

Reagentless micropatterning of hydrogen-terminated Si(111) via UV irradiation through a photomask has proven to be a convenient strategy for the preparation of ordered bicomponent monolayers. The success of this technique relies upon the differential rate of reaction of an alkene with the hydrogen-terminated and photooxidized regions of the surface. Monolayer formation can be accomplished under either thermal or photochemical conditions. It was observed that, after 3 h, reaction in neat alkene solution irradiation (Rayonet, 300 nm) afforded the expected patterned surface, while thermal conditions (150 degrees C) resulted in a partial loss of pattern fidelity. Monolayer properties and formation were studied on oxidized and hydrogen-terminated silicon under thermal and photochemical initiation, by contact angle, ellipsometry, Fourier transform infrared spectroscopy, high-resolution electron energy loss spectroscopy, and X-ray photoelectron spectroscopy. Results show that alkenes add to silanol groups on the silica surface in a manner consistent with acid catalysis: once attached to the surface, the silica oxidized the hydrocarbon.     

Self-assembly of organic monolayers on aerosolized silicon nanoparticles

A new method is described for surface functionalization of silicon nanocrystals. Organic monolayers were self-assembled via gas-phase adsorption of amines, alkenes, alkynes, and aldehydes onto the surfaces of aerosolized crystalline silicon nanoparticles of 12.2 nm diameter in an atmospheric pressure tube reactor. Assembly took place within 4 s at temperatures between 200 and 500 degrees C. The extent of adsorption was measured by using tandem differential mobility analysis (T-DMA), an on-line diagnostic method for measuring changes in particle size. Functionalized particles were further characterized by high-resolution transmission electron microscopy and diffuse reflectance Fourier transform infrared spectroscopy. The apparatus described in this work can be used for continuous mass production of functionalized silicon nanoparticles. Moreover, the overall strategy of using T-DMA for monitoring monolayer uptake could be generally applied to study surface processing of other aerosolized nanoparticle systems.     

Mild methods to assemble and pattern organic monolayers on hydrogen-terminated Si(111)

Mild methods to assemble well-ordered organic monolayers of olefins on Si(111) using 2,2,6,6-tetramethyl-1-piperidinyloxy and to pattern these monolayers on the micrometer-size scale using soft lithography are reported.     

Protein-resistant monolayers prepared by hydrosilylation of alpha-oligo(ethylene glycol)-omega-alkenes on hydrogen-terminated silicon (111) surfaces

Atomically flat, homogeneous, and protein-resistant monolayers can be readily prepared on H-Si(111) surfaces by photo-induced hydrosilylation of alpha-oligo(ethylene glycol)-omega-alkenes.     

Formation of organic monolayers on silicon via gas-phase photochemical reactions

A new method for the formation of molecular monolayers on silicon surfaces utilizing gas-phase photochemical reactions is reported. Hydrogen-terminated Si(111) surfaces were exposed to various gas-phase molecules (hexene, benzaldehyde, and allylamine) and irradiated with ultraviolet light from a mercury lamp. The surfaces were studied with in situ Fourier transform infrared spectroscopy, high-resolution electron energy loss spectroscopy, and scanning tunneling microscopy. The generation of gas-phase radicals was found to be the initiator for organic monolayer formation via the abstraction of hydrogen from the H/Si(111) surface. Monolayer growth can occur through either a radical chain reaction mechanism or through direct radical attachment to the silicon dangling bonds.     

The gel point as reference state: A simple kinetic model for crosslinking polybutadiene via hydrosilation

Kinetic data can be described in a simple model when using the gel point as reference state. This has been shown for crosslinking data on five high molecular weight polybutadienes (18 100–97 000 g/mol). Experiments were carried out under isothermal conditions with a constant amount of catalyst. Crosslinking took place by a hydrosilation reaction at vinyl sites which were randomly distributed along the backbone of the polybutadiene precursor molecules using the bifunctional aromatic silane p-bis(dimethylsilyl) benzene as connector. FTIR measurements showed that the hydrosilation reaction followed first order kinetics. The critical gel time, t_c, was determined by the instant at which power law relaxation behavior was observed (i.e. tan δ = constant) over the two lowest decades in frequency. The main parameters that were observed to affect t_c were the stoichiometric ratio, r, and the functionality of the polybutadiene, f. It was observed that the time to reach the gel point decreased with increasing precursor molecular weight (~f) of the polybutadiene. The gel time also decreased when increasing the initial amount of silane crosslinker. We were able to find a relationship between the gel time measured by the CFS technique and r and f by coupling the Flory-Stockmayer gelation theory with a simple first order kinetic curing scheme.     

Covalent attachment of organic monolayers to silicon carbide surfaces

This work presents the first alkyl monolayers covalently bound on HF-treated silicon carbide surfaces (SiC) through thermal reaction with 1-alkenes. Treatment of SiC with diluted aqueous HF solutions removes the native oxide layer (SiO2) and provides a reactive hydroxyl-covered surface. Very hydrophobic methyl-terminated surfaces (water contact angle theta = 107 degrees ) are obtained on flat SiC, whereas attachment of omega-functionalized 1-alkenes also yields well-defined functionalized surfaces. Infrared reflection absorption spectroscopy, ellipsometry, and X-ray photoelectron spectroscopy measurements are used to characterize the monolayers and show their covalent attachment. The resulting surfaces are shown to be extremely stable under harsh acidic conditions (e.g., no change in theta after 4 h in 2 M HCl at 90 degrees C), while their stability in alkaline conditions (pH = 11, 60 degrees C) also supersedes that of analogous monolayers such as those on Au, Si, and SiO2. These results are very promising for applications involving functionalized silicon carbide.     

Self-assembly of high-quality covalently bound organic monolayers onto silicon

A very mild method has been developed to obtain covalently attached alkyl monolayers from the attachment of 1-alkynes onto hydrogen-terminated silicon surfaces at room temperature in the dark. Apart from being the mildest method reported so far for the preparation of such monolayers, their quality, as indicated by water contact angles, XPS, and infrared spectroscopy, equals within experimental error that of the best reported alkyl monolayers on silicon.     

Nanopatterning of alkynes on hydrogen-terminated silicon surfaces by scanning probe-induced cathodic electrografting

The electrochemical cathodic electrografting reaction, previously demonstrated on bulk silicon surfaces, can be patterned on the nanoscale utilizing conducting probe atomic force microscopy (CP-AFM). Alkyne electrografting is a particularly useful chemical technique since it leads to direct covalent attachment of conjugated alkynes to silicon. In addition, application of a forward bias during the reaction renders the surface less sensitive to oxidation and the resulting monolayers are very stable in air and basic aqueous solution. Alkyne monolayer lines can be drawn down to 40 nm resolution using a Pt-coated AFM tip, and the heights of the monolayers scale with the molecular length of the alkyne. The tip is biased (+) and the surface is biased (-) to drive the cathodic electrografting reaction under ambient conditions. The resistance of the monolayers to fluoride, as well as friction force microscopy, indicate that the alkynes are covalently bonded to the surface, not oxide-based, and hydrophobic. The reaction does not work with alkenes, and therefore hydrosilylation is not the primary mode of reaction. Wider lines (300 nm) can be produced using broadened Pt-coated AFM tips. This reaction could be important for the interfacing of conjugated molecules directly to silicon in a spatially controlled fashion.     

Covalent assembly of silver nanoparticles on hydrogen-terminated silicon surface

Synthesis of ω-alkenyl-terminated silver nanoparticles (AgNPs) and then their immobilization on a hydrogen-terminated silicon surface in two-dimensional arrangement through covalent interaction are demonstrated. The thermal-induced hydrosilylation at mild conditions facilitate nanoparticles assembly through interaction between terminal alkenyl (CH(2)=CH-) groups of AgNPs and hydrogen-terminated silicon surface. The assembly of AgNPs on a silicon surface is characterized by FESEM and XPS. Adequate coating of 10-undecene-1-thiol (UDT) on AgNPs and mild temperature hydrosilylation impede the fusion or aggregation of nanoparticles, while they immobilized on a silicon surface, which is very crucial to preserve the discrete entities of nanoparticles. This elegant and facile approach provides stable monolayer of AgNPs with very good coverage area and promises potential to fabricate electronic devices and solar cells, where nanoparticles needs to be directly attached to the silicon surface without an interfacial oxide thin film.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

A kinetic model for the growth of znte by metal organic chemical vapour deposition

A kinetic model for the metal organic chemical vapour deposition (MOCVD) growth of ZnTe is presented, taking into account the competitive adsorption of organometallic precursors. By assuming that diethylzinc (DEZn) and diethyltellurium (DETe) or di-isopropyltellurium (DIpTe) are adsorbed onto the surface by two sites, the model yields the growth rate as a function of the gas-phase concentrations of the constitutents and is corroborated by experimental results obtained by the MOCVD growth (at 400°C with DETe or 350°C with DIpTe), which shows asymmetric behaviour: for a given DETe or DIpTe pressure (10^?4 atm), the growth rate as a function of DEZn partial pressure passes through a maximum, whereas, at the same constant DEZn pressure, the growth rate increases monotonically when the DETe or DIpTe partial pressure increases     

Mechanisms of thermal decomposition of organic monolayers grafted on (111) silicon

The thermal stability of different organic layers on silicon has been investigated by in situ infrared spectroscopy, using a specially designed variable-temperature cell. The monolayers were covalently grafted onto atomically flat (111) hydrogenated silicon surfaces through the (photochemical or catalytic) hydrosilylation of 1-decene, heptadecafluoro-1-decene or undecylenic acid. In contrast to alkyl monolayers, which desorb as alkene chains around 300 degrees C by the breaking of the Si-C bond through a beta-hydride elimination mechanism, the alkyl layers functionalized with a carboxylic acid terminal group undergo successive chemical transformations. At 200-250 degrees C, the carboxyl end groups couple forming anhydrides, which subsequently decompose at 250-300 degrees C by loss of the functional group. In the case of fluorinated alkyl chains, the C-C bond located between CH2 and CF2 units is first broken at 250-300 degrees C. In either case, the remaining alkyl layer is stable up to 350 degrees C, which is accounted for by a kinetic model involving chain pairing on the surface.     

Molecular modeling of alkyl and alkenyl monolayers on hydrogen-terminated Si(111)

On H-Si(111) surfaces monolayer formation with 1-alkenes results in alkyl monolayers with a Si-C-C linkage, while 1-alkynes yield alkenyl monolayers with a Si-C═C linkage. Recently, considerable structural differences between both types of monolayers were observed, including an increased thickness, improved packing, and higher surface coverage for the alkenyl monolayers. The precise origin thereof could experimentally not be clarified yet. Therefore, octadecyl and octadecenyl monolayers on Si(111) were studied in detail by molecular modeling via PCFF molecular mechanics calculations on periodically repeated slabs of modified surfaces. After energy minimization the packing energies, structural properties, close contacts, and deformations of the Si surfaces of monolayers structures with various substitution percentages and substitution patterns were analyzed. For the octadecyl monolayers all data pointed to a substitution percentage close to 50-55%, which is due the size of the CH(2) groups near the Si surface. This agrees with literature and the experimentally determined coverage of octadecyl monolayers. For the octadecenyl monolayers the minimum in packing energy per chain is calculated around 60% coverage, i.e., close to the experimentally observed value of 65% [Scheres et al. Langmuir 2010, 26, 4790], and this packing energy is less dependent on the substitution percentage than calculated for alkyl layers. Analysis of the chain conformations, close contacts, and Si surface deformation clarifies this, since even at coverages above 60% a relatively low number of close contacts and a negligible deformation of the Si was observed. In order to evaluate the thermodynamic feasibility of the monolayer structures, we estimated the binding energies of 1-alkenes and 1-alkynes to the hydrogen-terminated Si surface at a range of surface coverages by composite high-quality G3 calculations and determined the total energy of monolayer formation by adding the packing energies and the binding energies. It was shown that due to the significantly larger reaction exothermicity of the 1-alkynes, thermodynamically even a substitution percentage as high as 75% is possible for octadecenyl chains. However, because sterically (based on the van der Waals footprint) a coverage of 69% is the maximum for alkyl and alkenyl monolayers, the optimal substitution percentage of octadecenyl monolayers will be presumably close to this latter value, and the experimentally observed 65% is likely close to what is experimentally maximally obtainable with alkenyl monolayers.     

Si-C linked organic monolayers on crystalline silicon surfaces as alternative gate insulators.

Herein, the influence of silicon surface modification via Si-C(n)H(2n+1) (n=10,12,16,22) monolayer-based devices on p-type 100 and n-type 100 silicon is studied by forming MIS (metal-insulator-semiconductor) diodes using a mercury probe. From current density-voltage (J-V) and capacitance-voltage (C-V) measurements, the relevant parameters describing the electrical behavior of these diodes are derived, such as the diode ideality factor, the effective barrier height, the flatband voltage, the barrier height, the monolayer dielectric constant, the tunneling attenuation factor, and the fixed charge density (Nf). It is shown that the J-V behavior of our MIS structures could be precisely tuned via the monolayer thickness. The use of n-type silicon resulted in lower diode ideality factors as compared to p-type silicon. A similar flatband voltage, independent of monolayer thickness, was found, indicating similar properties for all silicon-monolayer interfaces. An exception was the C10-based monolayer device on p-type silicon. Furthermore, low values of N(f) were found for monolayers on p-type silicon (approximately 6 x 10(11) cm(-2)). These results suggest that Si--C linked monolayers on flat silicon may be a viable material for future electronic devices.     

A kinetic model of thermochemical transformation of solid organic fuels

A kinetic model of thermochemical transformation of solid organic fuels was constructed. The mathematical model describes the kinetics of drying, release and combustion of volatiles, and combustion and gasification of the nonvolatile (coke) residue at linear heating. The kinetic curves of burn-out of Irsha-Borodino brown coal at various heating rates and model parameters were calculated.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 9, 2004, pp. 1558–1567.Original Russian Text Copyright © 2004 by Boiko, Pachkovskii.