Wormlike micelles as a template for polymerization

The use of self-assembled materials as templates and structure-control agents in materials synthesis is both common and a rapidly growing area. However, the subset of work that focuses on cylindrical, rodlike and wormlike self-assembled micelles is under-utilized given the potential of these materials for synthesizing anisotropic materials. In recent years, there has been progress in polymerization of wormlike micelle systems at different length-scales and in the use of wormlike micelles as templates to control the morphology of materials grown in or around the aggregates.     

Wormlike micelles from a cage amine metallosurfactant

We have shown that copper and cobalt metallosurfactants derived from Cu(II) and Co(III) complexes of a macrobicyclic hexamine ("cage") can form wormlike micelles in aqueous solution that may coexist with or easily interconvert with vesicle structures. The cylindrical micelle structures are unusual for triple-chain surfactants with a single headgroup and are not easily accounted for using geometrical packing arguments. The solution behavior has been characterized by cryo-TEM and SAXS measurements. Both the Cu and Co compounds display viscoelastic solutions at 1 wt %, indicating that such behavior may be anticipated for the full variety of stable metal complexes formed by the cage headgroup, auguring applications based on the incorporation of metallo aggregates into mesoporous silica structures.     

Wormlike micelles formed by mixed cationic and anionic gemini surfactants in aqueous solution

The formation and the properties of wormlike micelles in aqueous solutions of mixed cationic and anionic gemini surfactants, 2-hydroxyl-propanediyl-α,ω-bis(dimethyldodecylammonium bromide) (12-3(OH)-12) and O,O'-bis(sodium 2-dodecylcarboxylate)-p-benzenediol (C(12)?C(12)), have been studied by steady-state and dynamic rheological measurements at 25°C. With the addition of a small amount of C(12)?C(12) into the solution of 12-3(OH)-12, the total surfactant concentration of which was always kept at 80 mmol L(-1), the solution viscosity was strongly enhanced and its maximum was much larger than that of the mixed system of propanediyl-α,ω-bis(dimethyldodecylammonium bromide) (12-3-12) and C(12)?C(12). The results of dynamic rheology measurements showed that 12-3(OH)-12/C(12)?C(12) formed longer wormlike micelles in comparison with 12-3-12/C(12)?C(12). This was attributed to the effect of hydrogen bonding occurring between 12-3(OH)-12 molecules, which was an effective driving force promoting micellar growth. As few C(12)?C(12) participated in the micelles, the electrostatic attraction between the oppositely charged head groups of 12-3(OH)-12 and C(12)?C(12) made the molecules in the aggregates pack more tightly. This reinforced the hydrogen-bonding interactions and greatly promoted the micellar growth.     

Wormlike micelles in mixed surfactant systems: effect of cosolvents

We have studied the structure and rheological behavior of viscoelastic wormlike micellar solutions in the mixed nonionic surfactants poly(oxyethylene) cholesteryl ether (ChEO15)-trioxyethylene monododecyl ether (C12EO3) and anionic sodium dodecyl sulfate (SDS)-C12EO3 using a series of glycerol/water and formamide/water mixed solvents. The obtained results are compared with those reported in pure water for the corresponding mixed surfactant systems. The zero-shear viscosity first sharply increases with C12EO3 addition and then decreases; i.e., there is a viscosity maximum. The intensity (viscosity) and position (C12EO3 fraction) of this maximum shift to lower values upon an increase in the ratio of glycerol in the glycerol/water mixed solvent, while the position of the maximum changes in an opposite way with increasing formamide. In the case of the SDS/C12EO3 system, zero-shear viscosity shows a decrease with an increase of temperature, but for the ChEO15/C12EO3 system, again, the zero-shear viscosity shows a maximum if plotted as a function of temperature, its position depending on the C12EO3 mixing fraction. In the studied nonionic systems, worm micelles seem to exist at low temperatures (down to 0 degrees C) and high glycerol concentrations (up to 50 wt %), which is interesting from the viewpoint of applications such as drag reduction fluids. Rheology results are supported by small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) measurements on nonionic systems, which indicate micellar elongation upon addition of glycerol or increasing temperature and shortening upon addition of formamide. The results can be interpreted in terms of changes in the surface curvature of aggregates and lyophobicity.     

Wormlike micelles in mixed amino acid-based anionic/nonionic surfactant systems

We present the formation of viscoelastic wormlike micelles in mixed amino acid-based anionic and nonionic surfactants in aqueous systems in the absence of salt. N-Dodecylglutamic acid (designated as LAD) has a higher Krafft temperature; however, on neutralization with alkaline amino acid l-lysine, it forms micelles and the solution behaves like a Newtonian fluid at 25 degrees C. Addition of tri(oxyethylene) monododecyl ether (C(12)EO(3)) and tri(oxyethylene) monotetradecyl ether (C(14)EO(3)) to the dilute aqueous solution of the LAD-lysine induces one-dimensional micellar growth. With increasing C(12)EO(3) or C(14)EO(3) concentration, the solution viscosity increases gradually, but after a certain concentration, the elongated micelles entangle forming a rigid network of wormlike micelles and the solution viscosity increases tremendously. Thus formed wormlike micelles show a viscoelastic character and follow the Maxwell model. Tri(oxyethylene) monohexadecyl ether (C(16)EO(3)), on the other hand, could not form wormlike micelles, although the solution viscosity increases too. The micelles become elongated; however, they do not appear to form a rigid network of wormlike micelles in the case of C(16)EO(3). Rheological measurements have shown that zero shear viscosity (eta(0)) increases with the C(12)EO(3) concentration gradually at first and then sharply, and finally decreases before phase separation. However, no such maximum in the eta(0) plot is observed with the C(14)EO(3). The eta(0) increases monotonously with the C(14)EO(3) concentration till phase separation. In studies of the effect of temperature on the wormlike micellar behavior it has been found that the eta(0) decays exponentially with temperature, following an Arrehenius behavior and at sufficiently higher temperatures the solutions follow a Newtonian behavior. The flow activation energy calculated from the slope of log eta(0) versus 1/T plot is very close to the value reported for typical wormlike micelles. Finally, we also present the effect of neutralization degree of lysine on the rheology and phase behavior. The formation of wormlike micelles is confirmed by the Maxwell model fit to the experimental rheological data and by Cole-Cole plots.     

Colloidal interactions mediated by end-adsorbing polymer-like micelles

We derive a statistical mechanical model for colloidal interactions mediated by polymer-like micelles (PLMs) that adsorb at the colloid surface. The model considers the end-adsorption and reversible scission of ideal chains, and is based on experimentally measurable parameters relevant to PLMs. The model predicts interparticle attractions due to micellar bridging that are stronger and longer-range than those encountered in ordinary telechelic polymers. Mapping the analytical potential onto the more familiar Double Yukawa potential allows, for the first time, accurate, a priori prediction of suspension microstructure and phase behavior when compared to experimental data for model nanoparticles dispersed in wormlike micelles over a range of solution conditions.     

Antibacterial polyelectrolyte micelles for coating stainless steel

In this study, we report on the original synthesis and characterization of novel antimicrobial coatings for stainless steel by alternating the deposition of aqueous solutions of positively charged polyelectrolyte micelles doped with silver-based nanoparticles with a polyanion. The micelles are formed by electrostatic interaction between two oppositely charged polymers: a polycation bearing 3,4-dihydroxyphenylalanine units (DOPA, a major component of natural adhesives) and a polyanion (poly(styrene sulfonate), PSS) without using any block copolymer. DOPA units are exploited for their well-known ability to anchor to stainless steel and to form and stabilize biocidal silver nanoparticles (Ag(0)). The chlorine counteranion of the polycation forms and stabilizes biocidal silver chloride nanoparticles (AgCl). We demonstrate that two layers of micelles (alternated by PSS) doped with silver particles are enough to impart to the surface strong antibacterial activity against gram-negative E. coli. Moreover, micelles that are reservoirs of biocidal Ag(+) can be easily reactivated after depletion. This novel water-based approach is convenient, simple, and attractive for industrial applications.     

Structure of strongly interacting polyelectrolyte diblock copolymer micelles

The structure of spherical micelles of the diblock poly(styrene-block-acrylic acid) [PS-b-PA] copolymer in water was investigated up to concentrations where the polyelectrolyte coronal layers have to shrink and/or interpenetrate in order to accommodate the micelles in the increasingly crowded volume. We obtained the partial structure factors pertaining to the core and corona density correlations with small angle neutron scattering and contrast matching in the water. The counterion structure factor was obtained with small angle x-ray scattering (SAXS) with a synchrotron radiation source. Furthermore, we have measured the flow curves and dynamic visco-elastic moduli. The functionality of the micelles is fixed with a 9 nm diameter PS core and a corona formed by around 100 PA arms. As shown by the SAXS intensities, the counterions are distributed in the coronal layer with the same density profile as the corona forming segments. Irrespective ionic strength and micelle charge, the corona shrinks with increasing packing fraction. At high charge and minimal screening conditions, the polyelectrolyte chains remain almost fully stretched and they interdigitate once the volume fraction exceeds the critical value 0.53+/-0.02. Interpenetration of the polyelectrolyte brushes also controls the fluid rheology: The viscosity increases by three orders of magnitude and the parallel frequency scaling behavior of the dynamic moduli suggests the formation of a physical gel. In excess salt, the coronal layers are less extended and they do not interpenetrate in the present concentration range.     

Wormlike morphology formation and stabilization of "pluronic p123" micelles by solubilization of pentaerythritol tetraacrylate

A transition from spherical to wormlike micelles of a poly(ethylene oxide) 20- block-poly(propylene oxide) 70- block-poly(ethylene oxide) 20 triblock copolymer Pluronic P123 induced by solubilization of a tetrafuctional monomer, Pentaerythritol tetraacrylate (PETA), in aqueous media has been studied. The wormlike micelles shape was locked by UV cross-linking of PETA within the micelles resulting in stabilized polymeric micelles (SPMs). The stability of SPMs in a good solvent for both polyether blocks like THF, and upon dilution below the critical micelle concentration (CMC) of P123 in water was confirmed by dynamic light scattering (DLS) and scanning force microscopy (SFM). Formation of cadmium sulfide (CdS) nanoparticles within the wormlike SPMs was carried out via the reduction of Cd (2+) with NaS and analyzed by transmission electron microscopy (TEM) and UV-vis absorption measurements. A stable water-dispersible hybrid system consisting of CdS quantum dots embedded into the wormlike SPMs was obtained.     

Wormlike micelles and microemulsions in aqueous mixtures of sucrose esters and nonionic cosurfactants

A study of the phase and rheological behavior of sucrose hexadecanoate (C16SE)/cosurfactant/water systems in the presence of solubilized oil, using complementary techniques such as dynamic light scattering and small angle X-ray scattering, is presented. Viscoelastic wormlike micellar solutions are found when a nonionic lipophilic cosurfactant is added to C16SE aqueous systems. Contrary to previous reports, the effect of oil solubilization on these wormlike micelles is not unique and depends on several factors. Linear alkyl chain oils that tend to solubilize in the micellar core have a disrupting effect, decreasing the relaxation time and the viscosity of the systems. This effect is larger as the molecular volume of oil increases and as the solubility of the cosurfactant in oil increases. On the other hand, oils that penetrate in the palisade layer, such as p-xylene, induce micellar growth and have a thickening effect at a given micellar composition. Thermodynamic considerations are used to explain the experimental results.     

Flow injection spectrofluorimetric determination of carvedilol mediated by micelles

We propose a novel evanescent wave scattering imaging method using an objective-type total internal reflection system to image and track single gold nanoparticles (GNPs) in solution. In this imaging system, only a millimeter-scale hole is employed to efficiently separate GNPs scattering light from the background reflected beam. The detailed experimental realization of the imaging system was discussed, and the effect of the hole size on imaging was investigated. We observed that the hole diameters from 2.5 to 4 mm are suitable to perform the scattering imaging by adjusting the incidence angle. The technology was successfully applied to track single gold nanoparticles in solution and on live cell membrane via the anti-epidermal growth factor receptor antibody. Compared to total internal fluorescence microscopy, the resonance light scattering detection has no photobleaching or blinking inherent to fluorescent dyes and quantum dots. Compared to conventional dark-field microscopy, the evanescent wave illumination can be conveniently applied to study membrane dynamics in living cells. Additionally, the objective-based configuration provides a free space above the coverslip, and allows imaging and concomitant manipulation of live cells in culture by microinjection, patch-clamping, AFM and other techniques.     

Calcium mediated polyelectrolyte adsorption on like-charged surfaces

Monte Carlo simulations within the primitive model of calcium-mediated adsorption of linear and comb polyelectrolytes onto like-charged surfaces are described, focusing on the effect of calcium and polyion concentrations as well as on the ion pairing between polymers and calcium ions. We use a combination of Monte Carlo simulations and experimental data from titration and calcium binding to quantify the ion pairing. The polymer adsorption is shown to occur as a result of surface overcharging by Ca(2+) and ion pairing between charged monomers and Ca(2+). In agreement with experimental observations, the simulations predict that the polymer adsorption isotherm goes through a maximum as the calcium or the polymer concentration is increased. The non-Langmuir isotherms are rationalized in terms of charge-charge correlations.     

Wormlike micelles in poly(oxyethylene) surfactant solution: Growth control through hydrophilic-group size variation

Rheological responses of colloidal gels formed from fumed silica suspensions in aqueous KOH solution at pH 11 by the addition of cationic surfactants, such as dodecyltrimethylammonium chloride (C12 TAC) and hexadodecyltrimethylammonium chloride (C16 TAC) have been investigated as functions of silica and surfactant concentrations. Stable and aggregated fumed silica suspensions with negative charges cause gelling by adding the cationic surfactants through electrical neutralization of their micelles. The resulting critical strain and storage modulus of the gelled silica suspension increase with an increase in the surfactant concentration, irrespective of the cationic surfactant. This means that the higher the surfactant concentration is, the more effective the electrical neutralization interaction through the micelle of the cationic surfactant is. Moreover, the resulting gels can be classified into the strong-link gel and the weak-link one in the presence of C12 TAC and C16 TAC, respectively, from a comparison of the silica volume fraction dependences of critical strain and storage modulus with the fractal gel model.     

pH and ionic strength responsive polyelectrolyte block copolymer micelles prepared by ring opening metathesis polymerization

Well‐defined amphiphilic block copolymers were prepared by ring opening metathesis polymerization and their stimuli responsive behavior of formed micelles in aqueous solution was investigated. The hydrophobic core of the micelles consists of either a poly[5,6‐bis(ethoxymethyl)bicyclo[2.2.1]hept‐2‐ene]‐block with a glass transition T_g at room temperature or a poly[endo,exo[2.2.1]bicyclohept‐5‐ene‐2,3‐diylbis (phenylmethanone)] with a T_g of 143 °C. For the polyelectrolyte shell, the precursor block poly[endo,exo[2.2.1]bicyclohept‐5‐ene‐2,3‐dicarboxyclic tert‐butylester] was transformed into the free acidic block by cleavage of the tert‐butyl groups using trifluoroacetic acid. Micellar solutions were prepared by dialysis, dissolving the copolymers in dimethyl sulfoxide which was subsequently replaced by water. All polymers form micelles with radii between 10 and 20 nm at a pH‐value below 5, where the carboxylic acid groups are in the protonated state. The block copolymer micelles show a strong increase of the hydrodynamic radius with increasing pH‐value, due to the repulsion among the formed carboxylate anions resulting in a stretching of the polymer chains. In this state, the micelles exhibit responsive behavior to ionic strength where a contraction of the micelles is observed as the carboxylate charges are balanced by sodium ions, whereas no changes of the hydrodynamic radius on addition of salt are observed at low pH. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1178–1191, 2009     

Amplified fluorescence quenching of a conjugated polyelectrolyte mediated by Ca2+

The fluorescence of conjugated polyelectrolytes (CPEs) is quenched with very high efficiency by small molecule quenchers. This effect has been referred to as amplified quenching. In the present communication, we demonstrate that aggregation of a poly(phenylene ethynylene)-type CPE (PPE-CO2-) induced by Ca2+ has a pronounced effect on the amplified quenching of the polymer by the dication methyl viologen (MV2+). In particular, absorption and fluorescence spectroscopy of PPE-CO2- in methanol solution indicate that addition of a low concentration of Ca2+ induces aggregation of the polymer chains. The range of MV2+ concentrations within which linear Stern-Volmer quenching behavior is observed systematically decreases with increasing Ca2+ concentration to a point where superlinear quenching is observed immediately upon addition of MV2+. This finding is unequivocal evidence that the superlinear Stern-Volmer quenching behavior typically observed in CPE-quencher systems arises due to quencher-induced aggregation of the CPE chains.     

Transport of monooleoylglycerol mediated by bile salt micelles across porous membranes

In order to study how the bile salts and lipids behave in the vicinity of microvillus, the transport properties of a sodium salt of deoxycholic acid (NaDC) and its mixture with monooleoylglycerol (MO) through artificial membranes were investigated in 0.15 M NaCl saline solution at 37°C.The hydrodynamic radius of MO-solubilized micelles was estimated to be approximately 17–20 Å from the transport study. The thermodynamically stable MO-NaDC mixed micelles formed above critical micelle concentration in the higher region of mole fraction of NaDC in the mixture (X _NaDC>ca. 0.6), can behave as a single species in transport process and freely pass through the porous membranes of both pore sizes, 0.01 m and 0.1 m.The permeabilities of MO-NaDC mixed micelles are large compared with those of pure NaDC micelles. MO molecules solubilized may probably enhance the interaction between MO and NaDC molecules by better contacting with the respective hydrophobic groups in a mixed micelle (the flexible structure of MO molecule enables it), and in this situation, the smaller micelles compared with those of pure NaDC must be more favorable.     

Wormlike micelles of a C22-tailed zwitterionic betaine surfactant: from viscoelastic solutions to elastic gels

The 22-carbon-tailed zwitterionic surfactant erucyl dimethyl amidopropyl betaine (EDAB) forms highly viscoelastic fluids in water at low concentrations and without the need for salt or other additives. Here, semidilute aqueous solutions of EDAB are studied by using a combination of rheological techniques, small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). EDAB samples show interesting rheology as a function of temperature. At low temperatures (approximately 25 degrees C), a 50 mM EDAB sample behaves like an elastic gel with an infinite relaxation time and viscosity. Upon heating to approximately 60 degrees C, however, the sample begins to respond like a viscoelastic solution; that is, the relaxation time and zero-shear viscosity become finite, and the rheology approaches that of a Maxwell fluid. The same pattern of behavior is repeated at higher EDAB concentrations. Cryo-TEM and SANS reveal the presence of giant wormlike micelles in all EDAB samples at room temperature. The results imply that, depending on temperature, EDAB wormlike micelles can exhibit either a gel-like response or the classical viscoelastic ("Maxwellian") response. The unusual gel-like behavior of EDAB micelles at low temperatures is postulated to be the result of very long micellar breaking times, which, in turn, may be due to the long hydrophobic tails of the surfactant.     

Structural dynamics,phase behavior,and applications of polyelectrolyte complex micelles

Self-assembly between oppositely charged polyelectrolytes conjugated to neutral polymeric blocks form polyelectrolyte complex (PEC) micelles. These nanostructures have gained significant interest in the field of nucleic acid and protein delivery, along with emerging applications in biosensing and catalysis. These carriers are highly modular systems, with the ability to engineer stimuli-responsive and targeting properties, making them smart platforms for biomedical applications. In this review, we discuss the current understanding of mechanisms involved in the assembly and disassembly of these nanoparticles, and the structural and functional changes as a response to solution conditions. We also discuss the latest and most impactful applications of PEC micellar systems in the biomedical field, with far-reaching influence on the treatment of various human diseases.     

阴离子蠕虫胶束

本文从分析蠕虫胶束形成的分子几何条件和自由能驱动因素入手,总结了传统阴离子表面活性剂蠕虫胶束的形成和性质,指出制约其构筑和产生优良黏弹性的原因。在此基础上,介绍了Gemini表面活性剂构筑蠕虫胶束的分子结构优势,以及由此构筑阴离子蠕虫胶束的研究进展,尤其是长刚性联接链Gemini表面活性剂形成的蠕虫胶束。最后特别指出,基于新颖分子结构优势,Gemini表面活性剂可望成为蠕虫胶束构筑的主要分子对象。