Preconcentration of triazine herbicides from water by an ion chromatography column and determination by gas chromatography-mass spectrometry

The efficiency of ion chromatography columns packed with styrene-divinylbenzene copolymer containing quaternary ammonium groups to preconcentrate triazine herbicides and their degradation products below μg/l levels has been established. Retention is studied for different types of water. Pure methanol was used in a one-step elution. Enrichment factors of at least 4000 are achieved. Determination was carried out by using gas chromatography-single-ion monitoring mass spectrometry. Recoveries for run-off agricultural water were between 67–100% and close to 100% for ground water. The maximum admissible concentration ion drinking water (0.1 μg/l) and the alert and alarm threshold values in surface water (1 and 3 μg/l, respectively) dictated by the European Union can be measured.     

Determination of pesticides in soil samples by solid phase extraction disks

Summary A systematic study comparing the methodology and analytical results obtained in an investigation of seven pesticide residues (Molinate, Atrazine, Carbofuran, Pirimicarb, Prometryn, Malathion and Tetrachlorvinphos) in soil samples is reported. Solid-phase extraction (SPE) using glass columns and 47 mm disks of octyl and octadecyl-bonded silica was used in the pesticide analysis. The best extraction efficiency and clearest extracts are obtained with C₈ disks. The analyses were carried out by capillary gas chromatography with nitrogen and phosphorus detection. Recovery experiments were performed at ppb levels in spiked soil samples. The average recoveries of the compounds were 53–77%. Detection limits are between 5 and 30 ng g^–1 based on 5 g moist soil sample. The method was validated by comparing it with conventional liquid-liquid extraction.     

Determination of organochlorine pesticides in water samples by dispersive liquid-liquid microextraction coupled to gas chromatography-mass spectrometry

A rapid and simple dispersive liquid-liquid microextraction (DLLME) has been developed to preconcentrate eighteen organochlorine pesticides (OCPs) from water samples prior to analysis by gas chromatography-mass spectrometry (GC-MS). The studied variables were extraction solvent type and volume, disperser solvent type and volume, aqueous sample volume and temperature. The optimum experimental conditions of the proposed DLLME method were: a mixture of 10 μL tetrachloroethylene (extraction solvent) and 1 mL acetone (disperser solvent) exposed for 30 s to 10 mL of the aqueous sample at room temperature (20 °C). Centrifugation of cloudy solution was carried out at 2300 rpm for 3 min to allow phases separation. Finally, 2 μL of extractant was recovered and injected into the GC-MS instrument. Under the optimum conditions, the enrichment factors ranged between 46 and 316. The calculated calibration curves gave a high-level linearity for all target analytes with correlation coefficients ranging between 0.9967 and 0.9999. The repeatability of the proposed method, expressed as relative standard deviation, varied between 5% and 15% (n = 8), and the detection limits were in the range of 1-25 ng L⁻¹. The LOD values obtained are able to detect these OCPs in aqueous matrices as required by EPA methods 525.2 and 625. Analysis of spiked real water samples revealed that the matrix had no effect on extraction for river, surface and tap waters; however, urban wastewater sample shown a little effect for five out of eighteen analytes.     

Quantitative analysis of imazamox herbicide in environmental water samples by capillary electrophoresis electrospray ionization mass spectrometry

Capillary electrophoresis-mass spectrometry (CE-MS) with an electrospray ionization interface was applied for the quantitative analysis of imazamox pesticide in well water, potable water, and pond water. The detector response for imazamox was determined to be linear over the concentration range of 50-1 ng/ml. The limits of quantitation and detection of the method were determined to be 200 and 20 ng/l for imazamox compound in each type of water sample, respectively. The total sample preparation and CE-MS analysis time was under 2 h.     

Supported liquid membrane extraction with single hollow fiber for the analysis of fluoroquinolones from environmental surface water samples

In this work, the simple analytical method for the determination of four fluoroquinolone antibiotics: ciprofloxacin, enrofloxacin, norfloxacin and danofloxacin, in environmental surface water samples is described. Sample pretreatment step was performed by the application of a technique based on supported liquid membrane extraction with the configuration of single hollow fiber (HF-SLM). The HPLC system with diode array detection was used for final analysis of studied analytes. Various parameters affecting the extraction efficiency during HF-SLM enrichment, such as type of membrane diluent, pH of donor (sample) and acceptor phases, as well as an enrichment time and salt content of sample were studied. Using the presented hollow-fiber extraction high recovery (70–80%) was achieved. It gave enrichment factor above 100. The detection limits in surface water samples, for the four target antibiotics, were at range 0.01–0.02 μg/l, when 10 ml samples were processed. The obtained results demonstrate the applicability of presented method for the selective extraction of fluoroquinolones in environmental water samples at ultratrace level. Errors, expressed as relative standard deviation (RSD) were below 8%, for all tested concentration levels.     

Headspace solid phase microextraction in the determination of pesticides in water samples from the Okavango Delta with gas chromatography-electron capture detection and time-of-flight mass spectrometry

Headspace solid phase microextraction (HS-SPME) was optimized for the analysis of pesticides with gas chromatography electron capture detection (GC-ECD) and high-resolution mass spectrometry. Factors influencing the extraction efficiency such as fiber type, extraction mode and temperature, effect of ionic strength, stirring and extraction time were evaluated. The lowest pesticide concentrations that could be detected in spiked aliquots after HS-SPME–GC-ECD ranged from 0.0005 to 0.0032 μg L^{− 1}. Consequently hexachlorobenzene, trans-chlordane, 4,4′-DDD and 4,4′-DDE were detected in water samples after HS-SPME at concentrations ranging from 2.4 to 61.4 μg L^{− 1} that are much higher than the 0.1 μg L^{− 1} maximum limit of individual organochlorine pesticides in drinking water set by the European Community Directive. The same samples were cleaned with ISOLUTE C₁₈ SPE sorbent with an optimal acetone/n-hexane (1:1 v/v) mixture for the elution of analytes. No pesticides were detected after SPE clean-up and pre-concentration. Precision for both methods was satisfactory with relative standard deviations less than 20%. This work demonstrated the superiority of HS-SPME as a sample clean-up and pre-concentration technique for pesticides in water samples as well as the need to identify and control point sources of pesticides.     

Determination of pesticides in water samples by solid phase extraction and gas chromatography tandem mass spectrometry

A multiresidue method for the determination of more than 80 pesticides in water has been developed and validated. The proposed method is based on SPE followed by GC coupled to MS/MS. Different variables affecting SPE procedure, such as cartridges, sample volume and solvents were studied, and mass spectrometric conditions were optimised in order to increase selectivity and sensitivity. Calibration curves were linear over the range of 0.03-0.5 microg/L. Recoveries were in the range of 70-110% and repeatability was below 20% for the lowest calibration point. LODs ranged from 0.001 to 0.025 microg/L and LOQs from 0.003 to 0.076 microg/L. Finally, the method was successfully applied to the analysis of water samples from southeast of Spain.     

Integrated system for on-line gas and liquid chromatography with a single mass spectrometric detector for the automated analysis of environmental samples

An integrated system has been developed which combines liquid (LC) and gas (GC) chromatographic separation with a single mass spectrometer (MS). On-line solid-phase extraction (SPE) of 10–200 ml aqueous samples on a short (10 × 2.0 mm I.D.) precolumn packed with a styrene-divinylbenzene copolymer is used for analyte enrichment. The trace-enrichment procedure was automated by means of a PROSPEKT cartridge-exchange/solvent-selection/valve-switching unit. After sample loading, the precolumn is eluted on-line in two subsequent runs, first onto the GC-MS system and, next, onto the LC-MS system using a particle beam (PB) interface. Prior to entering the PB-MS, the LC eluent passes through the flow cell of a UV diode-array detector (DAD). Both GC-MS and LC-PB-MS generate classical electron ionisation (EI) and chemical ionisation (CI) spectra which are useful for the identification of low- and sub-μg/l concentrations of environmental pollutants covering a wide polarity and volatility range. The LC-DAD data provide additional means for quantitation and yield complementary spectral information. All three detection systems (GC-MS, LC-DAD, LC-PB-MS) and the trace-enrichment procedure are fully automated and controlled from the keyboard of the central computer. With such a ‘MULTIANALYSIS’ system GC-MS, LC-DAD and LC-MS data of the same sample can be obtained within 3 h. The system was optimised with nine chlorinated pesticides in drinking water as test mixture. With 100-ml samples detection limits in GC-MS were 0.0005−0.03 μg/l, and in LC-PB-MS 0.5–7 μg/l, both in the full-scan (EI) mode. Negative chemical ionisation (NCI) with methane as reagent gas improved the sensitivity of six halogenated compounds 3- to 30-fold and provided relevant information for structural elucidation of unknown compounds in real-world samples. LC-DAD detection limits varied from 0.01 to 0.05 μg/l. Relative standard deviations (R.S.D.) of retention times were less than 0.2% in all systems, R.S.D.s of peak areas were 5–15% for GC-MS and LC-PB-MS and less than 5% for LC-DAD. The ‘MULTIANALYSIS’ system was used to analyse surface water samples and river sediment extracts; several pollutants were detected and identified.     

Automated on-line gel permeation chromatography-gas chromatography for the determination of organophosphorus pesticides in olive oil

An on-line combination of gel permeation chromatography and gas chromatography has been designed using either a laboratory-built or a commercially available LC-GC apparatus to determine organophosphorus pesticides in olive oil. Gel permeation chromatography was used for sample pretreatment, viz. to separate the low-molecular-mass pesticides from the higher-molecular-mass fat constituents of the oil. A mixture of n-decane and the azeotropic mixture of ethyl acetate and cyclohexane was found to give an adequate separation between the fat and the organophosphorus pesticides. The pesticide-containing fraction, monitored by a UV detector, was transferred on-line to the gas chromatograph using a loop-type interface. n-Decane (6%, v/v) was added to the eluent in order to widen the application range of the transfer technique towards more volatile pesticides. After solvent evaporation through the solvent vapour exit and subsequent GC separation, the compounds were selectively detected with a thermionic or a flame photometric detector. The set-up allowed the direct analysis of oil samples after dilution in the gel permeation chromatography eluent without further sample clean-up. Detection limits were about 5 and 10 μg/kg with the thermionic and the flame photometric detector, respectively, when using an injection volume of only 30 μl of the 20-fold diluted oil. The total procedure was linear in the 0.01–10 mg/kg range for both detectors. For twenty organophosphorus pesticides, the relative standard deviations were 3–13% at the 20–60 μg/kg level.     

SPE – Microwave‐assisted extraction coupled system for the extraction of pesticides from water samples

SPE is a commonly applied technique for preconcentration of pesticides from water samples. Microwave‐assisted extraction (MAE) technique is the extraction applied for preconcentration of different compounds from solid samples. SPE coupled with MAE is capable of preconcentrating these compounds from water samples too. This investigation was aimed at improving the efficiency of atrazine, alachlor, and α‐cypermethrin pesticide extraction from the spiked water samples applying SPE followed by MAE. In this way, MAE served for elution of pesticides from C₁₈‐extraction disks with solvent heated by microwave energy. Various elution conditions were tested for their effects on the extraction efficiency of the SPE–MAE combined technique. Several parameters, such as elution solvent volume (mL), elution temperature (°C), and duration of elution (min), affect the extraction efficiency of the SPE–MAE coupled system and need to be optimized for the selected pesticides. In order to develop a mathematical model, 15 experiments were performed in the central composite design. The equation was then used to predict recoveries of the pesticides under specific experimental conditions. Optimization of microwave extraction was accomplished using the genetic algorithm approach. Best results were achieved using 20 mL of ethanol at 60°C. Optimal hold time was 5 min and 24 s. The SPE–MAE combination was also compared with the conventional SPE extraction technique with elution of a nonpolar or a moderately polar compound with nonpolar solvents.     

Solid-phase extraction of room-temperature imidazolium ionic liquids from aqueous environmental samples

Owing to their favorable properties, ionic liquids have recently gained recognition as possibly environmentally benign solvents. Now among the most promising industrial chemicals, they have already been labeled green, but this appellation seems due entirely to their very low vapor pressure. This growing interest in the various applications of ionic liquids will soon result in their presence in the environment. Therefore, reliable analytical tools for the environmental analysis of ionic liquids need to be developed urgently. This paper presents a newly developed analytical procedure for the enrichment of 1-alkyl- and 1-aryl-3-methylimidazolium ionic liquids from water samples. The method is based on cation exchange solid-phase extraction followed by selective elution. Pre-concentrated samples are subjected to high-performance liquid chromatography (HPLC) with an advanced methodology for qualitative and quantitative analysis. The overall procedure was verified by using standard spiked samples of tap water, seawater, and freshwater.     

Trends in techniques for the extraction of drugs and pesticides from biological specimens prior to chromatographic separation and detection

The isolation of non-volatile organic poisons from biological specimens is often difficult and time consuming. This paper surveys the isolation of common drugs and pesticides from biological specimens, including serum, blood and tissue, and the effect of experimental variables on the recovery of compounds, with emphasis on recent trends in extraction techniques and new methods under development, particularly those applicable to forensic toxicology. Traditional liquid-liquid extraction techniques are increasingly being replaced by or used in combination with newer extraction techniques such as solid-phase and supercritical fluid extraction. The potential advantages and problems encountered when incorporating these new methodologies in the isolation of drugs and pesticides from biological matrices are discussed. Although early implementation of solid-phase extraction techniques in forensic toxicology has been hampered by a variety of problems, including extract quality, reproducibility and selectivity, improvements in sorbent quality and elution solvents continue to facilitate their replacement of traditional liquid-liquid extraction methods. Future developments in supercritical fluid extraction should allow this technique to develop in an extremely powerful quantitative tool for the isolation of drugs and pesticides either from solid-phase sorbents or from their endogenous matrices.     

Porous monolithic materials for extraction and preconcentration of pollutants from environmental waters

This review presents the strengths and weaknesses of monolithic materials for the enrichment of inorganic and organic contaminants in environmental waters. We describe the most common materials (silica, organic, and hybrid organic silica) and strategies for constructing monoliths in different moulds and shapes (tubes, cartridges, stir bars, fibers) published since 2015. The functionalization of the pore surfaces enhances their affinity towards different classes of pollutants. For instance, the incorporation of chelating groups enables the enrichment of potentially toxic metals and semi-metals in aquatic environments before the analyses by spectrometric techniques. Monolithic materials for extracting emerging pollutants, diverse classes of herbicides, and fungicides were proposed recently. Incorporation of carbon-based and magnetic nanoparticles, metal-organic frameworks, and ionic liquids enhanced their adsorption capacity by either increasing the surface area or providing multiple retention mechanisms. Monoliths with molecular recognition properties for highly selective extractions have been synthesized, including boronic functionalities and molecularly imprinted cavities. The final part describes the hybrid organic silica monoliths, emphasizing metal ions and speciation analysis hyphenated with ICP-MS. In the outlook section, we point to some fields we believe monoliths will benefit, such as their 3-D technologies preparation. We also pointed their potential applicability in portable chromatographic systems, restricted access materials, and enhanced use to preconcentrate viruses from aquatic environments.     

Sorptive extraction of pesticides from food and environmental samples using metal organic framework-based adsorbents

Sorptive pre-concentration of pesticide residues in food and environmental samples is increasingly gaining momentum. This can be attributed to fact that most sorptive extraction techniques are solvent-free as well as the availability of emerging sorbents with relatively high adsorption capacities. Metal organic frameworks (MOFs) are among the emerging sorbents that have captured the interests of many researchers during pesticide analysis. There are many types of MOFs that have been used by researchers to pre-concentrate pesticides in food and environmental samples. Some researchers have successfully used MIL-based MOFs during sorptive extraction of pesticides in complex matrices. This review gives a detailed discussion of their application during pesticide pre-concentration. Other researchers have used the ZIF series of MOFs for the sorptive pre-concentration of pesticides in food and environmental samples. The utilisation of the ZIF series of MOFs during pesticide pre-concentration is well-articulated in this review. The review also devoted to the application of UiO and HKUST series of MOFs during the pre-concentration of pesticides in food and environmental samples. In addition, the challenges associated with the use of MOFs during sorptive pre-concentration of pesticides are also discussed in this review.     

Solid-phase extraction of triazole fungicides from water samples using disks impregnated with carbon nanotubes followed by GC-MS analysis

Triazole fungicides are pesticides widely employed in the cultivation of fruits, vegetables and grains. However, their ability to change the steroid hormone biosynthesis may result in endocrine complications for mammals, as well as changes in cholesterol and triglyceride levels and hepatotoxicity. The analysis of the triazole fungicides in superficial waters is important in order to monitor the risk for the biota. However, the use of efficient extraction procedures has been necessary in order to concentrate these pesticides before the analysis. In-disk solid-phase extraction (SPE) can be highlighted as a potential pre-concentration technique, mainly because the possibility to extract the analytes from a large sample volume, increasing the method detectability. Carbon nanotubes (CNTs) have been often used as solid extraction phase due to their high sorption capacity, surface area and internal volume, as well as mechanical, chemical and thermal stability. In this paper, we proposed the preparation of a new SPE disk impregnated with CNTs for the extraction of triazole fungicides from environmental water samples. The disks were obtained by acid corrosion of a cellulose membrane followed by its impregnation with CNTs. The developed method was validated for the analysis of triadimenol, tebuconazole and epoxiconazole, according to international validation protocols. The limits of quantification obtained for triadimenol, tebuconazole and epoxiconazole were 0.1, 0.1 and 0.05 µg L^?1, respectively. The linearity ranged from 0.05 to 10.00 µg L^?1 for epoxiconazole and from 0.1 to 10.00 µg L^?1 for triadimenol and tebuconazole, with correlation coefficients higher than 0.999 for all of them. The precisions, expressed as relative standard deviation, were lower than 12%. The accuracies were within ?12.07% to 17.7% (expressed as relative error).     

Silicone rod extraction of pharmaceuticals from water

Silicone elastomer (in the form of a flexible rod) is one of the materials currently tested for use in analytical extraction techniques and passive sampling devices. We investigated the applicability of this material for the enrichment of selected polar pharmaceuticals (antipyrine, carbamazepine, diclofenac, ibuprofen, bezafibrate) from water. Time-resolved batch extraction tests (up to five weeks in duration) were performed in stirred water samples ( approximately 0.5 L) with 2-cm-long silicone rod pieces. After re-extraction of trapped compounds with methanol, analysis was performed using liquid chromatography coupled with mass spectrometry. Distribution equilibrium was reached after a test duration of seven days. The silicone rod/water partition coefficients of the investigated pharmaceuticals range from 4 (antipyrine) to 1250 (diclofenac), and are related to the hydrophobicity of the compound. Enrichment of these pharmaceuticals in the silicone rod is lower than for other compound classes (chlorinated and polycyclic hydrocarbons).     

Effective extraction of triazines from environmental water samples using magnetism-enhanced monolith-based in-tube solid phase microextraction

This article reports on the effective extraction of triazines from environmental water samples using magnetism-enhanced monolith-based in-tube solid phase microextraction (ME-MB/IT-SPME). Firstly, monolithic poly (octyl methacrylate-co-ethyleneglycol dimethacrylate) capillary column doped with magnetic nanoparticles was synthesized inside a fused silica. After that, the monolithic capillary column was placed inside a magnetic coil that allowed the exertion of a variable magnetic field during adsorption and desorption steps. The effects of intensity of magnetic field, adsorption and desorption flow rate, volume of sample and desorption solvent, pH value and ionic strength in sample matrix on the performance of ME-MB/IT-SPME for triazines were investigated in details. Under the optimized conditions, the developed ME-MB/IT-SPME showed satisfactory quantitative extraction efficiencies of the target analytes between 64.8% and 99.7%. At the same time, the ME-MB/IT-SPME was combined with high-performance liquid chromatography with diode array detection to detect six triazines in water samples. The limits of detection (S/N = 3) and limits of quantification (S/N = 10) were in the ranges of 0.074–0.23 μg/L and 0.24–0.68 μg/L, respectively. The precision of the proposed method was evaluated in terms of intra- and inter-assay variability calculated as relative standard deviation, and it was found that the values were all below 10%. Finally, the developed method was successfully applied for environmental water samples such as farmland, lake and river water with spiked recoveries in the range of 70.7–119%.     

Critical evaluation and comparison of enrichment efficiency of multi-walled carbon nanotubes, C18 silica and activated carbon towards some pesticides from environmental waters

In this work, optimization of multi-residue solid phase extraction (SPE) procedures coupled with high-performance liquid chromatography for the determination of Propoxur, Atrazine and Methidathion from environmental waters is reported. Three different sorbents were used in this work: multi-walled carbon nanotubes (MWCNTs), C18 silica and activated carbon (AC). The three optimized SPE procedures were compared in terms of analytical performance, application to environmental waters, cartridge re-use, adsorption capacity and cost of adsorbent. Although the adsorption capacity of MWCNT was larger than AC and C18, however, the analytical performance of AC could be made close to the other sorbents by appropriate optimization of the SPE procedures. A sample of AC was then oxidized with various oxidizing agents to show that ACs of various surface properties has different enrichment efficiencies. Thus researchers are advised to try AC of various surface properties in SPE of pollutants prior to using expensive sorbents (such as MWCNT and C18 silica).