多胺型阴离子交换纤维吸附铬(VI)的动力学

以聚丙烯腈纤维为原料, 采用化学改性法, 制备了多胺型阴离子交换纤维. 研究该纤维对Cr(VI)的吸附特性. 在研究的温度及浓度范围内, 该纤维对Cr(VI)吸附的平衡数据符合Langmuir和Freundlich吸附等温方程, 对Cr(VI)有较强的亲和力, 吸附反应易于进行. 重点研究了该纤维对Cr(VI)的吸附动力学特性, 分别采用Lagergren一级动力学方程、修正伪一级动力学方程、伪二级动力学方程和颗粒内扩散方程进行拟合, 计算相应的速率常数. 研究表明, 该吸附是一个快速吸附过程, 20 min即可接近吸附平衡, 吸附过程符合伪二级动力学方程, 以化学吸附为主, 该纤维能够多次反复对Cr(VI)进行吸附.     

新型螯合树脂聚苯乙烯负载葡糖胺对Pt(Ⅳ)吸附性能

合成了新型螯合树脂聚苯乙烯负载葡糖胺(PS-GA)。研究了树脂对Pt(Ⅳ)的吸附容量、吸附动力学、等温吸附等静态吸附性能及影响吸附的因素。结果表明,该树脂对Pt(Ⅳ)的吸附量较高;吸附动力学研究证明树脂对Pt(Ⅳ)的吸附为液膜扩散控制,吸附的活化能通过计算得10.31kJ/mol;树脂对Pt(Ⅳ)的等温吸附,与Freundlich方程相比,更加符合Langmuir方程;计算了等温吸附过程的热力学参数ΔG,ΔH,ΔS值;升高温度有利于吸附;树脂可用2%硫脲～0.1mol/LHCl溶液清洗再生,5次再生后仍保持良好的吸附能力,适合重复使用。     

钯的络离子在氧化铝载体上的吸附

研究了钯的负络离子(PdCl_4~-)在纤维氧化铝及球状η—Al_2O_3上的吸附性能。讨论了吸附平衡数据与Langmuir 单分子层吸附模型偏离的原因。认为吸附平衡规律可以近似地用Freundlich 经验等温方程描述。考察了吸附量随吸附时间的变化规律,提出表观吸附量可用如下经验方程关联:q=t/(a bt)     

萘在粘胶基活性炭纤维上的吸附

研究了水溶液中萘在粘胶基活性炭纤维(VACF)吸附剂上的等温吸附.用多种吸附方程(Langmuir、Freundlich、Dubinin-Radushkevitch(D-R)、Dubinin-Astalov(D-A)、Langmuir-Freundlich(L-F)、Redlich-Peterson(R-P))对吸附实验数据进行拟合,考察了温度、pH和负载铜离子对萘吸附的影响.方程拟合结果表明微孔吸附容积填充理论对VACF吸附萘有较好的适用性,优于单层吸附理论.在20-40℃之间,萘的吸附是自发进行的,30℃以上时,萘的吸附量显著降低.提出了新的机理来解释pH较低时吸附量显著上升的实验现象.负载铜离子后VACF对萘吸附量降低.     

聚丙烯纤维预辐照接枝制备弱碱性离子交换纤维及其对链霉素的吸附

以γ-射线预辐照,在聚丙烯(PP)纤维上接枝丙烯酰胺(AAm),再经过Hofmarm降解反应制备弱碱性离子交换纤维(PP-g-YAm)交换容量达到5.47mmol/g干纤维.研究了PP-g-VAm纤维对链霉素的吸附和解吸性能.其吸附等温曲线符合Langmiur吸附等温式.静态吸附试验表明,PP-g-AAm纤维对链霉素的吸附量可以达到446.96mg/g千纤维,脱附率达到98.9%.     

HPD-100树脂吸附小檗碱的热力学及动力学研究

研究了小檗碱在HPD-100树脂上的吸附热力学和动力学行为。考察了小檗碱在HPD-100树脂上的吸附等温曲线和吸附动力学曲线,确定了吸附过程的热力学及动力学参数。结果表明,HPD-100树脂对小檗碱的等温吸附可采用Langmuir方程描述、吸附为自发进行的放热型物理吸附过程;Dunwald–Wagnen内扩散方程能较好地拟合吸附动力学数据,吸附过程以颗粒内扩散为主要控制步骤,该吸附过程的表观活化能为29.11kJ/mol。本文为HPD-100树脂分离富集小檗碱类生物碱的实际应用提供基础数据及指导。     

一个与吸附剂浓度有关的Langmuir等温式

实验测定了不同吸附剂浓度下, 高岭土对Pb(II)和Cu(II)的吸附作用, 结果表明存在明显的吸附剂浓度效应, 即吸附等温线随吸附剂浓度升高而降低. 采用传统的Langmuir 吸附等温式对实验数据进行拟合表明, 此等温式可准确地描述给定吸附剂浓度下的吸附结果, 但不能预测其吸附剂浓度效应. 根据表面组分活度(SCA)模型, 假设吸附剂颗粒间存在相互作用, 吸附剂表面吸附位的活度系数不等于1, 而应为吸附剂浓度的函数, 推导出了一个与吸附剂浓度有关的Langmuir (Langmuir-SCA)方程. 运用高岭土吸附Pb(II)和Cu(II)以及文献中蛭石吸附Zn(II)和Cd(II)、咖啡吸附Pb(II)的实验数据检验方程的适用性, 结果表明Langmuir-SCA方程可准确地描述所观察到的吸附剂浓度效应. 方程的两个内禀参数, 热力学平衡常数(K_eq)和特征饱和吸附量(Γ_m⁰), 与吸附剂浓度无关, 并可由吸附实验数据拟合求得.     

复合型螯合吸附材料PEI/SiO2对铜离子吸附性能的研究

通过γ-氯丙基三甲氧基硅烷的媒介, 将聚乙烯亚胺(PEI)偶联接枝到硅胶微粒表面, 制备了复合型螯合吸附材料PEI/SiO2;研究了PEI/SiO2对Cu2 的吸附性能. 复合型螯合吸附材料PEI/SiO2对Cu2 具有强的螯合吸附能力;等温吸附数据符合Langmuir方程, 且吸附量随温度升高而增大;pH对吸附量有很大的影响, pH 7时, 吸附量最高.     

偕胺肟化聚丙烯腈纳米纤维的制备及在含金属离子废水处理中的应用

利用电纺丝技术制备了聚丙烯腈纳米纤维无纺布, 然后在水溶液原位偕胺肟化得到偕胺肟化聚丙烯腈纳米纤维, 该纳米纤维可用于吸附再生含金属离子废水. 采用氯化铜溶液模拟含金属离子废水, 探讨不同肟化率的偕胺肟化纳米纤维对铜离子的吸附效果; 发现肟化率78.8%的偕胺肟化纳米纤维的吸附能力最好, 利用Langmuir吸附方程得到最大吸附值为56.5 mg/g, 同时吸附后可将含铜废水浓度从100 mg/L降至13 μg/L, 远远低于国标GB8978-1996规定的铜排放的一级标准(总铜浓度<0.5 mg/L). 吸附铜离子的纳米纤维在1 mol/L稀硝酸中, 100 min后铜离子的解吸附率超过98%. 经4次吸附-解吸附循环后, 偕胺肟化纳米纤维的吸附能力仍能达到首次吸附最大吸附值的50%以上, 表明偕胺肟化纳米纤维具有一定的循环再生能力.     

复合型胺基吸附纤维及其对二氧化碳的吸附性能

将聚乙撑亚胺固化在玻璃纤维上,制得胺基吸附纤维.系统考察了不同原料比例下该吸附纤维的化学结构性能、热稳定性能及交换容量,测定了该吸附纤维的吸水率,在饱和水蒸汽和干燥条件下对CO2的吸附性能,以及作为CO2气体吸附材料的重复使用及再生性能.研究表明,适当的交联剂用量可使该吸附纤维250℃左右仍保持热稳定.该吸附纤维具有较高的交换容量,最高可达到3mmol/g以上;在饱和水蒸汽环境中,该吸附纤维对二氧化碳的吸附量可达20wt%以上,但吸附量随着交联程度的提高而减低.该吸附纤维具有良好的重复使用及再生性能,经再生使用后,吸附纤维对湿态CO2的吸附量变化不大.     

Adsorption of fluoride, phosphate, and arsenate ions on a new type of ion exchange fiber

A new type of ion exchange fiber for the removal of fluoride, phosphate, and arsenate ions has been developed. A batch adsorption technique for investigating adsorption kinetic and equilibrium parameters and determining pH adsorption edges is applied. It is shown that the adsorption properties of the ion exchange fiber for fluoride, phosphate, and arsenate ions depend on the pH value and anion concentration. The adsorption of arsenate on the sorbent reaches a maximum of 97.9% in the pH value range of 3.5 to 7.0. The adsorption percentage of phosphate is more than 99% in the pH range of 3.0 to 5.5. The adsorption of fluoride on the ion exchange fiber is found to be 90.4% at pH 3.0. The Freundlich model can describe the adsorption equilibrium data of fluoride, arsenate, and phosphate anions. The sorption of the three anions on the ion exchange fiber is a rapid process, and the adsorption kinetic data can be simulated very well by the pseudo-second-order rate equation. The column performance is carried out to assess the applicability of the ion exchange fiber for the removal of fluoride, phosphate, and arsenate ions from synthetic wastewaters with satisfactory removal efficiency. The desorption experiment shows that fluoride ion sorbed by the fiber column can be quantitatively desorbed with 5 mL of 0.50 mol/L NaOH at elution rate of 1 mL/min, and 30 mL of NaOH is necessary for the quantitative recovery of phosphate and arsenate ions.     

载铁(β-FeOOH)球形棉纤维素吸附剂去除地下水砷(Ⅲ)的研究

制备了一种载铁(β-FeOOH)球形棉纤维素吸附剂,并用于地下水中As(Ⅲ)的去除.吸附剂对As(Ⅴ)和As(Ⅲ)在吸附容量、选择性和速率等方面都具有良好的性能,无需预氧化As(Ⅲ),其适用pH范围宽,不必调节原水的pH.吸附剂孔隙度大,机械强度好,活性成分铁的载入量高,吸附As(Ⅲ)的活性好.Langmuir和Freundlich方程能较好地描述吸附平衡方程,其吸附动力学符合Lagergren准二级方程.吸附As(Ⅲ)的最佳pH范围为6-9.SO42-和Cl-等干扰离子均不影响As(Ⅲ)的去除.柱吸附实验表明,即使在较高流速和As(Ⅲ)进水浓度下,吸附剂对As(Ⅲ)的去除依然具有很高的穿透容量和饱和容量.吸附剂可以用NaOH溶液再生,洗脱和再生效率较高.活性成分β-FeOOH形态稳定,柱实验和再生时铁均无泄漏.     

Molybdenum-Blue Spectrophotometric Method for Determination of Lewisite Vapor in Air

Abstract

A method was developed for determining lewisite vapor in air. The method entails the collection of lewisite in an impinger or solid-sorbent sampler, conversion of the trapped lewisite to arsenite ion, oxidation of arsenite to arsenate, and determination of the arsenate ion by molybdenum-blue spectrophotometry. Relative to other available techniques, the one described here requires a minimum of instrumentation and can be executed without the use of highly toxic lewisite solutions for instrument calibration.     

Speciation of arsenic compounds by HPLC with hydride generation atomic absorption spectrometry and inductively coupled plasma mass spectrometry detection

An arsenic specific detection system utilizing on-line microwave digestion and hydride generation atomic absorption spectrometry (MD/HGAAS) is described for arsenic speciation by using high performance liquid chromatography (HPLC). Both ion exchange chromatography and ion pair chromatography have been studied for the separation of arsenite, arsenate, monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), and arsenobetaine (AB). When the commonly used mobile phases, phosphate and carbonate buffers at pH 7.5, are used on an anion exchange column, arsenite and AB co-elute. However, selective determination of these two arsenic compounds can be achieved by using the new detection system. Partial separation between arsenite and AB can be achieved by increasing the mobile phase pH to 10.3 and by using a polymer based anion exchange column. The detection limit obtained by using anion exchange chromatography with MD/HGAAS detection is approximately 10 ng/ml (or 200 pg for a 20-mul sample injection) for arsenite, DMAA and AB, 15 ng/ml (or 300 pg) for MMAA, and 20 ng/ml (or 400 pg) for arsenate. Complete separation of the five arsenic compounds is achieved on a reversed phase C18 column by using sodium heptanesulfonate as ion pair reagent. Comparable resolution between chromatographic peaks is obtained by using MD/HGAAS detection and inductively coupled plasma mass spectrometry (ICPMS) detection.     

Investigation of amphoteric polybenzimidazole (PBI) nanofiltration hollow fiber membrane for both cation and anions removal

The removal of both anions (phosphate, arsenate, arsenite and borate ions) and cations (copper ions) has been investigated by employing a lab-developed amphoteric polybenzimidazole (PBI) nanofiltration (NF) hollow fiber membrane. The amphoteric characteristics are due to the imidazole group within PBI molecules that makes the PBI NF membrane have an isoelectric point near pH 7.0 and show different charge signs based on the media pH. Investigations on the rejection capability of typical anions, e.g. phosphate, arsenate, arsenite, borate anions and typical heavy metal cations, e.g. copper ions, reveal that the PBI NF membrane exhibits impressive rejection performance for various ions removal. However, their rejections are strongly dependent on the chemical nature of electrolytes, solution pHs and the feed concentrations. The experimental results are analyzed by using the Spiegler–Kedem model with the transport parameters of the reflection coefficient (σ) and the solute permeability (P). The PBI NF membrane may have potential to be used in industrial removal of various environmentally unfriendly ion species.     

Methylation and Demethylation of Dimethylarsinic Acid in Rats Following Chronic Oral Exposure

Metabolites of dimethylarsinic acid (DMA) were studied in rats chronically exposed to DMA in drinking water. The urine was collected by forced urination at the end of 8, 20 and 30 weeks and the feces at the end of 30 weeks. The samples were analyzed for arsenic species by a combined system of ion chromatography and inductively coupled plasma mass spectrometry (IC–ICP–MS). Increases in arsenite, DMA, trimethylarsine oxide and a still-to-be-identified arsenic compound (which was eluted immediately after monomethylarsonic acid on the chromatogram) were detected in both urine and feces. At the 100 mg l⁻¹ dose, DMA was the main component in the urine; arsenite was a main component in the feces. The results indicate that, besides undergoing methylation, DMA can be demethylated to inorganic arsenic, and demethylation of DMA may be associated with intestinal bacteria     

Collisionally damped ion motion in ICR spectrometry

A Schrödinger equation equivalent to the Langevin equation of ion motion in ICR cells is presented. A wave function for the scattering states has been found as the solution to the equation of ion motion under the influence of electric and magnetic fields perturbed by a scattering potential. Applying the minimized wave packet as a wave function describing coherent states, the scattering amplitudes are determined explicitly. The connection between the collision cross section and the scattering amplitudes is found by making use of the incoming and outgoing particle flux density. The collision cross section found in this way is converted from quantum theory to classical physics. The collision cross section, which plays an essential role in the determination of rate constants can be determined by the aid of ICR experimental data if the contribution of an alternating electric field is taken into account.     

Liquid chromatography electrospray mass spectrometry with variable fragmentor voltages gives simultaneous elemental and molecular detection of arsenic compounds

A single quadrupole high performance liquid chromatography electrospray mass spectrometry system with a variable fragmentor voltage facility was used in the positive ion mode for simultaneous recording of elemental and molecular mass spectral data for arsenic compounds. The method was applicable to the seven organoarsenic compounds tested: four arsenic-containing carbohydrates (arsenosugars), a quaternary arsonium compound (arsenobetaine), dimethylarsinic acid, and dimethylarsinoylacetic acid. It was not suitable for the two inorganic arsenic species arsenite and arsenate. In the case of arsenosugars, qualifying ion data for a characteristic common fragment (m/z 237) was also simultaneously obtained. The method was used to identify and quantify the major arsenosugars in crude extracts of two brown algae.     

A simple algorithm improves mass accuracy to 50-100 ppm for delayed extraction linear matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A simple mathematical technique for improving mass calibration accuracy of linear delayed extraction matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (DE MALDI-TOFMS) spectra is presented. The method involves fitting a parabola to a plot of Delta(m) vs. mass data where Delta(m) is the difference between the theoretical mass of calibrants and the mass obtained from a linear relationship between the square root of m/z and ion time of flight. The quadratic equation that describes the parabola is then used to correct the mass of unknowns by subtracting the deviation predicted by the quadratic equation from measured data. By subtracting the value of the parabola at each mass from the calibrated data, the accuracy of mass data points can be improved by factors of 10 or more. This method produces highly similar results whether or not initial ion velocity is accounted for in the calibration equation; consequently, there is no need to depend on that uncertain parameter when using the quadratic correction. This method can be used to correct the internally calibrated masses of protein digest peaks. The effect of nitrocellulose as a matrix additive is also briefly discussed, and it is shown that using nitrocellulose as an additive to the alpha-cyano-4-hydroxycinnamic acid (alphaCHCA) matrix does not significantly change initial ion velocity but does change the average position of ions relative to the sample electrode at the instant the extraction voltage is applied.