纳米复合模板水凝胶的制备及其性能

以非离子表面活性剂聚氧乙烯(20)鲸蜡醇醚(Brij58)为模板, 采用自由基聚合制备得到聚(N-异丙基丙烯酰胺)/Brij58/粘土纳米复合模板水凝胶(PLH). 相比于传统纳米复合水凝胶, PLH水凝胶力学性能与亲水性明显改善. 场发射扫描电镜(FESEM)结果表明: Brij58的引入导致传统纳米复合水凝胶的孔洞数量增加, 孔与孔相互贯穿, 大孔结构更加规整, 大孔之间由众多小孔连接. 拉伸应力-应变、储能模量和溶胀动力学研究结果表明, 断裂应力、断裂负载和断裂伸长率随Brij58含量的增加呈先增加后降低的趋势, 然而水凝胶储能模量与最大溶胀度随Brij58含量的增加而增加. 同时, 表面接触角结果表明: 由于Brij58的模板作用和Brij58同粘土之间的吸附作用, 使PLH水凝胶表面接触角先增大后减小.     

溶致液晶作模板水凝胶的制备及其表征

以表面活性剂Brij 58溶致液晶(LLC)为模板, 采用光聚合的方法合成了结构规整的新型溶致液晶型聚丙烯酰胺(PAAm)水凝胶, 并对其结构、形貌和性能进行了研究. 扫描电镜结果表明活性剂Brij 58用量为10%～40%时, 可形成结构规整、孔径均一的LLC型水凝胶, 其孔径为1～2 µm, 约为普通水凝胶的1/40. 当Brij 58浓度大于50%时, 体系发生相分离, 此时合成的水凝胶含水量及孔隙率下降. 傅立叶变换红外光谱(FTIR)显示, LLC型水凝胶中羰基和氨基的红外吸收向低波数方向移动, 表明其中形成了大量的分子间氢键. 同时, LLC型PAAm水凝胶还保持了普通水凝胶的pH敏感性, 相同条件下, 其溶胀比大于普通水凝胶.     

Hydrophobically modified alginate for extended release of pharmaceuticals

Hydrophobically modified alginate hydrogels have great potential in drug delivery as they are biologically compatible and cost efficient. While previous works have shown successful protein, and hydrophobic and hydrophilic drug delivery, little information regarding the relationship between crosslinker density and drug release rate is known. This paper investigates the impact of crosslinker density and hydrophobic degree of substitution within modified alginate gels and solutions on the release kinetics using model hydrophobic drug, sulindac. Near zero‐order release was obtained for an extended period of 5 days. Drug release rates decreased as the crosslinker density within both modified alginate hydrogels and solutions increased. Release data fit well to a simplified Fickian relationship, suggesting that the release mechanism is diffusion‐limited. These release characteristics also correlate with bulk rheological measurements, indicating a strong interrelationship between the mechanical properties and the drug release characteristics of the hydrogels.     

Synthesis,Bifunctionalization, and Remarkable Adsorption Performance of Benzene‐Bridged Periodic Mesoporous Organosilicas Functionalized with High Loadings of Carboxylic Acids

Highly ordered benzene‐bridged periodic mesoporous organosilicas (PMOs) that were functionalized with exceptionally high loadings of carboxylic acid groups (COOH), up to 80 mol % based on silica, have been synthesized and their use as adsorbents for the adsorption of methylene blue (MB), a basic dye pollutant, and for the loading and release of doxorubicin (DOX), an anticancer drug, is demonstrated. These COOH‐functionalized benzene? silicas were synthesized by the co‐condensation of 1,4‐bis(triethoxysilyl) benzene (BTEB) and carboxyethylsilanetriol sodium salt (CES), an organosilane that contained a carboxylic acid group, in the presence of non‐ionic oligomeric surfactant Brij 76 in acidic medium. The materials thus obtained were characterized by a variety of techniques, including powder X‐ray diffraction (XRD), nitrogen‐adsorption/desorption isotherms, TEM, and ¹³C and ²⁹Si solid‐state NMR spectroscopy. Owing to the exceptionally high loadings of COOH groups, their high surface areas, and possible π? π‐stacking interactions, these adsorbents have very high adsorption capacities and extremely rapid adsorption rates for MB removal and for the controlled loading/release of DOX, thus manifesting their great potential for environmental and biomedical applications.     

Hydrophilic silicone hydrogels with interpenetrating network structure for extended delivery of ophthalmic drugs

In the current work, hydrophilic silicone hydrogels were prepared for extended drug delivery applications. The preparation method was based on sequential interpenetrating network synthesis. A hydrophilic network was prepared by radical copolymerization of hydrophilic monomers 2‐hydroxyethyl methacrylate and poly(ethylene glycol) diacrylate. A hydrophobic silicone network was obtained by crosslinking polymerization of bifunctional methacrylated polydimethylsiloxanes macromonomer. The morphology of the silicone hydrogels was characterized by transmission electron microscopy. The result showed that the silicone hydrogels exhibited heterogeneous morphology. The properties of the silicone hydrogels such as equilibrium swelling ratio (ESR), mechanical property, oxygen permeability, contact angle, and protein repelling ability were investigated. Finally, the silicone hydrogels were loaded with timolol by pre‐soaking in drug solution to evaluate drug‐loading capacity and in vitro release behavior. The results showed that mechanical strength and oxygen permeability increased, and the ESR decreased with the increase of silicone component in the silicone hydrogels. The result of the contact angle measurement indicated that the silicone hydrogels possessed hydrophilic surfaces. The drug loading and in vitro releases were dependent on the composition of hydrophilic/hydrophobic phase of silicone hydrogels. Copyright © 2011 John Wiley & Sons, Ltd.     

Molecular Imprinting of Cyclodextrin Supramolecular Hydrogels Improves Drug Loading and Delivery

Cyclodextrin‐based controlled delivery materials have previously been developed for controlled release of different therapeutic drugs. In this study, a supramolecular hydrogel made from cyclodextrin‐based macromonomers is subjected to molecular imprinting to investigate the impact on release kinetics and drug loading, when compared with non‐imprinted, or alternately imprinted hydrogels. Mild synthesis conditions are used to molecularly imprint three antibiotics—novobiocin, rifampicin, and vancomycin—and to test two different hydrogel chemistries. The release profile and drug loading of the molecularly imprinted hydrogels are characterized using ultraviolet spectroscopy over a period of 35 days and compared to non‐imprinted, and alternately imprinted hydrogels. While only modest differences are observed in the release rate of the antibiotics tested, a substantial difference is observed in the total drug‐loading amount possible for hydrogels releasing drugs which has been templated by those drugs. Hydrogels releasing drugs which are templated by other drugs do not show improved release or loading. Analysis by FTIR does not show substantial incorporation of drug into the polymer. Lastly, bioactivity assays confirmed long‐term stability and release of incorporated antibiotics.     

Spin probes in micellar and polymer self-associating systems

The results of studies of micellar and self-associating polymer systems by spin probe ESR spectroscopy are summarized. The local dynamics and structures of low-molecular-weight micelles built of cationic surfactants bearing long alkyl chains (from C₁₆ to C₂₂), gels of hydrophobically modified polymers, polymer micelles, micellar complexes of nonionic surfactant (Brij58) with hydrogels based on polyacrylic acid, and associates formed in aqueous solutions of poly(diphenylenesulfophthalide) are discussed. Interest in these systems is caused by prospects of their practical use as carriers in drug delivery, in biotechnology, for the enhancement of oil production, and in other purposes.     

Chitosan based hybrid hydrogels for drug delivery: Preparation,biodegradation, thermal,and mechanical properties

In the present paper, biodegradable hybrid hydrogels were prepared by using chitosan as a natural polymer and polyurethane containing azomethine as a synthetic polymer for the drug delivery application for 5-fluorouracil. The fabricated hydrogels were characterized via FT-IR and SEM analysis. Besides, the thermal, mechanical, and wettability properties, water uptake, biodegradation, protein absorption, drug loading, and release behaviors of the hybrid hydrogels were studied. The obtained results indicated that the fabricated hybrid hydrogels have exhibited good mechanical, hydrophilic, water uptake, and biodegradation behaviors. The hybrid hydrogels also showed 50% drug release amounts and they could be a good candidate for the controlled delivery of 5-FU due to these properties.     

Development of Antibacterial,Degradable and pH-Responsive Chitosan/Guar Gum/Polyvinyl Alcohol Blended Hydrogels for Wound Dressing

The present research is based on the fabrication preparation of CS/PVA/GG blended hydrogel with nontoxic tetra orthosilicate (TEOS) for sustained paracetamol release. Different TEOS percentages were used because of their nontoxic behavior to study newly designed hydrogels’ crosslinking and physicochemical properties. These hydrogels were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and wetting to determine the functional, surface morphology, hydrophilic, or hydrophobic properties. The swelling analysis in different media, degradation in PBS, and drug release kinetics were conducted to observe their response against corresponding media. The FTIR analysis confirmed the components added and crosslinking between them, and surface morphology confirmed different surface and wetting behavior due to different crosslinking. In various solvents, including water, buffer, and electrolyte solutions, the swelling behaviour of hydrogel was investigated and observed that TEOS amount caused less hydrogel swelling. In acidic pH, hydrogels swell the most, while they swell the least at pH 7 or higher. These hydrogels are pH-sensitive and appropriate for controlled drug release. These hydrogels demonstrated that, as the ionic concentration was increased, swelling decreased due to decreased osmotic pressure in various electrolyte solutions. The antimicrobial analysis revealed that these hydrogels are highly antibacterial against Gram-positive (Staphylococcus aureus and Bacillus cereus) and Gram negative (Pseudomonas aeruginosa and Escherichia coli) bacterial strains. The drug release mechanism was 98% in phosphate buffer saline (PBS) media at pH 7.4 in 140 min. To analyze drug release behaviour, the drug release kinetics was assessed against different mathematical models (such as zero and first order, Higuchi, Baker–Lonsdale, Hixson, and Peppas). It was found that hydrogel (CPG2) follows the Peppas model with the highest value of regression (R² = 0.98509). Hence, from the results, these hydrogels could be a potential biomaterial for wound dressing in biomedical applications.     

温敏性抗菌水凝胶的制备与控释技术研究进展

温敏水凝胶是一类通过感知温度变化使自身发生相变的智能型聚合物凝胶,通过负载抗菌剂或抗菌性单体制备抗菌水凝胶是近年来药物控制释放、组织工程以及生物免疫等领域关注的热点。本文概述了负载抗菌剂型温敏性抗菌水凝胶的物理交联和化学交联制备技术的研究概况,着重阐述了温敏性抗菌水凝胶的孔径调控、制备材料调控、载药模式调控等技术的研究进展,并对温敏性抗菌水凝胶的控释技术应用前景,特别是在生物质材料领域的应用前景进行了展望。     

Photo cross-linked biodegradable hydrogels for enhanced vancomycin loading and sustained release

A series of biodegradable hydrogels based on dextran and poly（L-glutamic acid） were fabricated for effective vancomycin loading and release. The preparation of hydrogels was simply achieved by photo cross-linking of methacrylated dextran and poly（L-glutamic acid）-g-hydroxyethyl methacrylate （PGH） in the presence of photoinitiator 12959. The structures of hydrogels were characterized by FTIR and SEM. The swelling and enzymatic degradation behaviors of hydrogels were examined to be dependent on the poly（L-glutamic acid） content in the hydrogels. The higher content of poly（L-glutamic acid） in the gel, the higher swelling ratio and quicker degradation were observed. More interestingly, the hydrogel with higher PGH ratio showed higher vancomycin （VCM） loading content, which might be due to the electrostatic interaction between carboxylate groups in hydrogel and ammonium group of VCM. In vitro drug release from the VCM-loaded hydrogels in aqueous solution exhibited sustained release of VCM up to 72 h, while the in vitro antibacterial test based on the VCM-loaded hydrogel showed an efficient Methicillin-Resistant S. aureus （MRSA） inhibition extending out to 7 days. These results demonstrated that the biodegradable hydrogels which formed by in situ photo-cross linking would be promising as scaffolds or coatings for local antibacterial drug release in tissue engineering.     

A green chemistry approach towards synthesizing hydrogel for sustained ocular delivery of brinzolamide: In vitro and ex vivo evaluation

Brinzolamide is a carbonic anhydrase inhibitor used in the eye drop form for the treatment of glaucoma. It requires frequent dosing to attain therapeutic concentration. Therefore, this study aimed to prepare sustained ocular drug delivery of brinzolamide. The objective of the study was to prepare a hydrogel loaded with a nanostructured lipid carrier (NLC) of brinzolamide. The hydrogel was prepared by a green synthesis approach using genipin as a natural crosslinking agent and polymers such as carboxymethyl chitosan and poloxamer 407. The melt emulsification-ultra sonication method was used to prepare a nanostructured lipid carrier of brinzolamide, which was loaded into a hydrogel using a swelling and loading method. The NLC formulation has shown small particle sizes of 111.20 ?± ?2.15 ?nm, polydispersity index of 0.280 ?± ?0.005 and % entrapment efficiency of 82.16% ?± ?0.14%. The NLC-loaded hydrogels of brinzolamide formulations were studied for swelling properties and showed temperature and pH-responsive swelling behavior. The optimized hydrogel formulation has been studied for in vitro drug release and showed drug release for a longer duration (24 ?h) than marketed eye drops (8 ?h). In an ex vivo study, hydrogel formulations showed transcorneal permeability 4.54 times greater than marketed eye drops. The hydrogel formulation of brinzolamide produced by the green synthesis method has shown sustained-release properties with no sign of ocular irritation. Hence, the hydrogel of brinzolamide-loaded NLC would be the potential drug delivery approach in the near future for sustained ocular drug delivery in glaucoma management.     

Release of chlorambucil from poly(N-isopropylacrylamide) hydrogels with beta-cyclodextrin moieties

The present work is focused on investigating the behavior of controlled drug release poly(N-isopropylacrylamide) (PNIPA) hydrogels in the presence of beta-cyclodextrin (beta-CD). For this purpose, three types of NIPA hydrogels with beta-CD moieties were synthesized with different architectures according to our previous studies. An anti-cancer drug (chlorambucil, CLB), which can form an inclusion complex with beta-CD, was selected for loading and in vitro release studies. The drug was loaded into hydrogels via a swelling method. DSC was used to study the interactions between the CLB molecules and the polymers. The results indicate that the CLB-polymer interactions are at the molecular level. Loading CLB into these polymers can result in an evident decrease in the glass transition temperature (T(g)), and the variation of T(g) (DeltaT(g)) depends on the structures of the polymers and their beta-CD content. The controlled release experiments show that the presence of beta-CD can markedly enhance CLB release from shrunken PNIPA hydrogels and increase the ratio of CLB released in total drug loading content. Release profile of CLB from hydrogels 1a-c and 4 at pH 1.4 and 7.4, at 37 degrees C.     

Preparation of poly(N-isopropylacrylamide) emulsion gels and their drug release behaviors

Stimuli-sensitive drug delivery systems (DDSs) have attracted considerable attention in medical and pharmaceutical fields; thermosensitive DDS dealing with poly(N-isopropylacrylamide) (poly(NIPA)) have been widely studied. Novel NIPA emulsion gels, i.e., NIPA hydrogels containing distributed oil (oleyl alcohol) microdroplets, were synthesized by means of an emulsion-gelation method in which the polymerization of hydrogels in an aqueous phase in an oil-in-water (O/W) emulsion and the loading of a lipophilic drug (indomethacin) dissolved in an oil phase were accomplished simultaneously. The pulsatile (on-off) drug release from the NIPA emulsion gel loading indomethacin to a phosphate buffered saline (PBS) solution was successfully controlled by a temperature swing between 25 degrees C (release off) and 40 degrees C (release on). The mechanism of the pulsatile drug release was discussed in relation to the diffusion rate, distribution ratio, solvent exchange of NIPA hydrogels, and drug release from an NIPA organogel. The mechanism was as follows: the solvent exchange occurred within the NIPA emulsion gel (the NIPA gel-network absorbed oleyl alcohol with indomethacin) at temperatures above the LCST, and the diffusion rate of indomethacin through the solvent-exchanged gel was higher at 40 degrees C than at 25 degrees C.     

The use of isothermal titration calorimetry to assess the solubility enhancement of simvastatin by a range of surfactants

Surfactants are commonly used to increase the solubility of poorly water soluble drugs but the interactions between drug and surfactant can be complex and quantitative relationships can be hard to derive. One approach is to quantify the thermodynamics of interaction and relate these parameters to known solubility or dissolution rate enhancement data. Isothermal titration calorimetry (ITC) was used to measure the enthalpy and free energy of transfer of a model drug (simvastatin) to a number of surfactant (SDS, HTAB, SDCH and Brij 35) micelles. These data were then compared with the solubility enhancements determined for each surfactant using HPLC assays. As expected, there was correlation between the free energy of transfer for the drug to each surfactant and the solubility enhancement of that surfactant. Although the data set is limited, the results suggest that ITC screening of a range of surfactants against a poorly water soluble drug may allow the selection of the best potential solubilising surfactants.     

Magnetically responsive hydrophobic pockets for on–off drug release

The vast majority of drugs available on the market are hydrophobic compounds. As a result, their poor water solubility can critically compromise the overall absorption of these drugs by patients. Although numerous different strategies have been developed to improve their bioavailability, the controlled delivery of these drugs is still a challenge. In this sense, stimuli-responsive hydrogels could be a solution to improve administration and stable release. However, the strategies required to render hydrogels hydrophobic mostly rely on weak hydrophobic interactions, which can lead to disassembly of the system and undesired burst discharge. Accordingly, the on-demand release of poorly water-soluble drugs is still a major milestone in this field. To circumvent these setbacks, we present for the first time a hydrophobic, magnetically responsive hydrogel based on the diaminotriazine (DAT) skeleton. The versatility of DATs in terms of H-bond formation and metal complexation simultaneously endows the hydrogel with hydrophobicity and magnetic responsiveness, thus allowing both the efficient loading and on–off release of a model hydrophobic drug as well as of a hydrophobic bioactive substance. Theoretical calculations further suggested stable formation of DAT aggregates that operate as efficient hydrophobic cavities or ‘pockets’ for these compounds. Moreover, these materials were found to be suitable for enhancing the viability and growth of cell lines often used as in vitro models of neuronal function and differentiation. The present magnetic hydrogels hold interesting potential for tissue engineering as biocompatible scaffolds for the on-demand release of hydrophobic compounds, which remains the focus of current research efforts.     

Polyglycol-templated synthesis of poly(N-isopropyl acrylamide) microgels with improved biocompatibility

We report on the synthesis and characterization of thermally responsive poly(N-isopropyl acrylamide) (PNIPAM) nanoparticle hydrogels (i.e., microgels). Microgels with narrow size distributions were synthesized after optimizing the concentrations of monomer, surfactant, and initiator. Polyglycol block copolymers (trade name Pluronic) and sodium dodecylsulfate (SDS) surfactants were compared. In all cases, the particles' size decreased with increasing surfactant concentration, and comparable sizes could be produced with any of the surfactants. The choice of surfactant, however, had a significant influence on the biocompatibility of the PNIPAM microgels. The copolymer-stabilized microgels were less cytotoxic than those stabilized by SDS, as measured using 3(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt assays. Even after dialysis (for 3 days) to remove most surfactant, the SDS-based microgels remained more cytotoxic than particles prepared with Pluronics. After exposing cells to polyglycol surfactant solutions, it was found that the polyglycol with highest fraction of polyethylene oxide (Pluronic F127) showed the lowest level of cytotoxicity over the studied range of concentrations. Similarly, PNIPAM microgels synthesized with this surfactant had the lowest level of cytotoxicity. Finally, drug loading and release studies were performed using doxorubicin as a model drug.     

Extension of the surfactant bridge model for the electrorheological effects of surfactant-activated suspensions

Surfactants influence the electrorheological (ER) response in two ways. At low surfactant concentrations, they enhance the ER response by enhancing the particle polarizability; at high concentrations, the response degrades (nonlinear ER response). The nonlinear ER behavior arises from the formation of surfactant bridges between the particles at high surfactant concentrations. A surfactant bridge model was introduced to explain the nonlinear behavior (tau0 proportional to En, n approximately 1) of surfactant-activated ER suspensions when surfactant bridges were formed between the particles. Here, the surfactant bridge model is extended for the prediction of both the linear and nonlinear ER behaviors of surfactant-activated ER suspensions over the low and high surfactant concentrations (for Brij 30, from 0 to 7 wt%), regardless of the formation of surfactant bridges between the particles. For 20 wt% neutral alumina suspensions in silicone oil activated by Brij 30, the predicted ER behaviors show almost the same Brij 30 concentration and electric field strength dependence. It predicts the linear E2 dependence of the ER response at low surfactant concentrations and the nonlinear ER behavior at high surfactant concentrations. Also, the estimated yield stresses show fairly good agreement with the experimental data.     

Effects of intercalated hydrotalcite on drug release behavior for poly(acrylic acid-co-N-isopropyl acrylamide)/intercalated hydrotalcite hydrogels

The influence of positively charged intercalated hydrotalcite (IHT) in the anionic poly(acrylic acid-co-N-isopropyl acrylamide), poly(AA-co-NIPAAm)/hydrotalcite nanocomposite hydrogels on the drug release behavior for the drugs with different charges was investigated in this study. Results show that the loading amount and release ratio of indomethacin are affected by the swelling ratio in saline solution and related to the affinity in the alcohol solution, respectively. The loading amount and release ratio of caffeine are affected by the swelling ratio. The loading amount of crystal violet (CV) increased with an increase of the content of intercalating agent in IHT of the gel but the fractional release of CV in the gels decreases with increase in intercalating agent content. The result of release and loading for phenol red in the hydrogels is contrary to CV.     

Methyl methacrylate-co-itaconic acid (MMA-co-IA) hydrogels for controlled drug delivery

In the present work methyl methacrylate-co-itaconic acid (MMA-co-IA) hydrogels were synthesized by free radical copolymerization of methyl methacrylate (MMA) and itaconic acid (IA) using ethylene glycol dimethacrylate (EGDMA) and methylene bisacrylamide (MBAAm) as crosslinkers and benzoyl peroxide as initiator. Selected samples were loaded with model drug lactulose. For the lactulose release, the effect of pH, monomeric compositions, degree of crosslinking were investigated. The release of lactulose was studied for 8 h period in USP phosphate buffer solutions of varying pH 1.2, 5.5, 6.5 and 7.0. The drug release data were fitted into various kinetics models like the zero order, first order, Higuchi and Peppas. The release kinetics of lactulose from MMA/IA hydrogels was found to be best described by the Peppas model. Results showed that drug release increased by increasing IA content in the hydrogels but the effect of changing of crosslinking ratio on drug release was not significant. The surface morphology of MMA/IA drug loaded hydrogel was studied by SEM which revealed uniform distribution of the drug in the hydrogels. In conclusion, it can be said that lactulose can be successfully incorporated into crosslinked MMA/IA hydrogels and its release can be modulated by changing the mole fraction of the acid component in the gels.