分子印迹固相萃取-高效液相色谱法同时检测烟叶中磺酰脲类农药残留

以氯磺隆（CS）为模板分子,甲基丙烯酸为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂,在二氯甲烷氛围中,经沉淀聚合制备氯磺隆分子印迹聚合物（CS-MIP）微球。将该聚合物微球作为填料制得分子印迹固相萃取柱用于样品前处理,建立了分子印迹固相萃取-高效液相色谱（MIP-SPE-HPLC）同时检测烟叶中6种磺酰脲类除草剂残留的分析方法。针对氯磺隆、甲磺隆、苄嘧磺隆、苯磺隆、胺苯磺隆和烟嘧磺隆6种磺酰脲类除草剂,在烟叶中加标0.50~50 μg/g,经氯磺隆分子印迹固相萃取柱（CS-MIP-SPE）净化和富集,高效液相色谱（HPLC）检测,其平均回收率为77.60%~102.05%,相对标准偏差为0.16%~7.07%,检出限为0.08~0.46 μg/g。将MIP-SPE-HPLC方法用于实际农药残留检测,结果表明可同时满足烟叶中多种磺酰脲类除草剂残留量的检测要求。     

选择性提取单取代磺酰脲除草剂的印迹聚合物的合成及评价

以丙烯酰胺为功能单体合成了新型的单嘧磺隆印迹聚合物,用平衡吸附及液相色谱的方法研究了印迹聚合物对于印迹分子及其结构类似化合物NK#94827的识别特性及亲和能力.研究结果表明,以丙烯酰胺为功能单体得到的印迹聚合物对NK#94827具有较强的识别能力;为印迹聚合物应用于环境样品中NK#94827及其结构类似化合物的分析打下了基础.     

分子印迹聚合物固相萃取研究进展

对最新报道的分子印迹聚合物作为固相萃取剂及其在色谱样品前处理方面的应用进行综述和展望,主要包括固相萃取、基质固相分散萃取、固相微萃取、搅拌棒吸附萃取和磁性材料萃取,同时总结了分子印迹聚合物制备技术面临的挑战和问题,提出了可能的解决方案。     

高容量分子印迹聚合物的制备及表征

以α-甲基丙烯酸和4-乙烯基吡啶为二元功能单体,乙二醇二甲基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,氯仿为致孔剂用本体聚合法合成了甲磺隆分子印迹三元共聚物,并用固相萃取方法对该聚合物在有机相及水相中的键合容量进行了评价,与同一条件用单一单体合成的聚合物的键合容量进行了比较,发现该三元共聚物在有机相中每克聚合物可键合20.5 mg的甲磺隆分子,水相中每克聚合物可键合19.2 mg的甲磺隆分子.采用核磁滴定对三元共聚体系的预聚溶液中分子作用力进行了研究,发现三元体系的预聚溶液中分子间作用力引起的位移变化幅度比二元体系的预聚溶液的变化大很多,这说明形成了更强的作用位点.     

吡哌酸分子印迹聚合物的分子识别

采用分子印迹技术合成了吡哌酸分子印迹聚合物。运用平衡结合实验研究了聚合物的吸附特性和选择性识别能力。Scatchard分析表明,在本文所研究的浓度范围内,聚合物中形成了两类不同的结合位点。吡哌酸分子印迹聚合物对吡哌酸呈现较高的选择识别特性,可作为固相萃取剂,在人血清吡哌酸的分析中对样品进行了有效的提取和净化。     

样品中分子印迹固相萃取技术的最新应用进展

现代样品体系一般复杂,采用一般的分析方法对其分离富集难度较大。分子印迹聚合物的高选择性使其在复杂体系样品的净化富集中具有很强的应用潜力,本文对分子印迹聚合物作为固相萃取剂及其在色谱样品前处理方面的应用进行了综述和展望,主要包括分子印迹中空纤维萃取、分子印迹固相萃取柱萃取、分子印迹整体柱萃取、分子印迹膜萃取、搅拌棒吸附萃取、磁性材料萃取等技术,同时总结了分子印迹固相萃取技术在食品分析、环境分析以及药物与生物分析等方面的应用进展。     

磁性吡嘧磺隆印迹聚合物的制备及性能研究

以包覆Si O2的Fe3O4为载体,吡嘧磺隆(PS)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,通过表面印迹法制备了磁性PS分子印迹聚合物(MIP),采用红外光谱、扫描电镜对其结构进行表征,采用吸附实验对其性能进行研究,并以MIP为固相萃取填料,结合高效液相色谱进行检测。结果表明,MIP对PS的饱和吸附量为68.94mg/g,印迹因子为2.49。将本方法应用于大米中PS残留分析,回收率在87.73%~99.57%范围内,相对标准偏差低于5.51%。所制备的MIP对样品中PS的富集、分离效果良好。     

替代模板分子印迹技术在样品前处理中的应用

分子印迹聚合物具有抗恶劣环境、选择性高、稳定性好等特点,广泛应用于复杂样品的前处理。采用结构类似物作为替代模板分子,可以解决分子印迹聚合物制备时目标物溶解性差的问题,替代模板分子印迹聚合物不仅对目标分析物具有选择性识别能力,还可以避免模板泄露对痕量分析造成的影响。本文综述了替代模板分子印迹技术在样品前处理中的应用进展,包括替代模板分子印迹技术在固相萃取、固相微萃取、色谱固定相、基质固相分散萃取中的应用,最后对替代模板分子印迹技术在未来的样品前处理中的研究进行了展望。     

分子印迹固相萃取-液相色谱质谱联用对4种磺酰脲类除草剂残留的测定

采用苄嘧磺隆分子印迹固相萃取柱(MISPE)对加标大米中的苄嘧磺隆、甲磺隆、苯磺隆和烟嘧磺隆4种磺酰脲类除草剂进行净化和富集预处理,并采用LC-MS方法进行定量分析.质谱条件为:正离子检测模式(M+H),检测质量范围为m/z 200 ～800 ,毛细管电压3.93 kV,锥孔电压20 V,脱溶剂温度250 ℃,辅助气流速4 L/min.4种磺酰脲类除草剂在0.01 ～0.70 mg·L~(-1)范围内线性良好.回收率为68% ～100%,表明样品液中的烟嘧磺隆、甲磺隆、苯磺隆和苄嘧磺隆能直接被分子印迹固相萃取柱中的印迹位点保留,而杂质几乎不被保留.分子印迹固相萃取柱对磺酰脲类除草剂表现出良好的识别性能.     

单嘧磺隆晶体-活性构象转换的分子动力学模拟

应用分子动力学模拟方法对单嘧磺隆在水、正辛醇和正辛烷3种不同溶剂中的构象行为、单嘧磺隆与3种溶剂之间的相互作用能及氢键相互作用进行了计算研究. 计算结果表明, 在3种不同的溶剂中, 单嘧磺隆的优势构象不同; 其构象转换过程, 特别是转换成活性构象的过程主要发生在水溶液中; 与溶剂分子间的相互作用是分子构象行为的决定因素; 单嘧磺隆的脲桥部分可以和含氢键接受体的溶剂形成氢键, 分子间与分子内氢键的竞争可能是从晶体构象转换成活性构象的主要驱动力.     

HEPT类化合物的QSAR研究

为定量结构／活性相关性研究提取了量子化学参数,拓扑指数Am,分子连接性指数^mxt及疏水性常数,同时应用正交变换和最佳变量子集算法（Leaps-and-Bonds)进行了变量压缩和选择,进而实施了多元回归分析,并由此结果进行了HEPT类化合物（1－[(2-hydroxyethoxy)methyl]-6-(phenylthio)-thymine derivatives)的结构／活性关系的理论解释,进行了人工神经网络法对于该类化合物的活性预测,其结构明显好于多元回归法。     

From the Micro- to the Macro-: Managing the Conservation of the Warship,Vasa

Sweden's famous warship, Vasa, sank on her maiden voyage in August 1628, and remained on the bottom of Stockholm harbour for 333 years. Raised in 1961, she became the first large-scale wooden object to be treated with polyethylene glycol (PEG). In the summer of 2000 a number of acidic salt precipitations were noticed on the surface of the ship and on wooden artefacts in the storerooms. An international research project has been established to look into the causes of this problem and suggest possible re-treatments. Meanwhile projects are underway to monitor movements in the ship, to build a better support system, and to replace the thousands of iron bolts holding the structure together, while a sophisticated new climate system has recently been installed in the museum.     

液滴荧光传感与计算机联用技术在微量分析中的应用

通过在LS55型荧光-磷光-发光分光光度计上加装液滴产生及调节附件,采用计算机采集与分析处理数据,成功地研制了双通道液滴光化学传感装置.利用葡聚糖凝胶对复合维生素B中不同组分的选择性吸附来达到分离与同时检测的目的,并将其用于复合维生素B药片的分析,取得了满意的结果.     

On the scaling of the interface energy of the liquid clusters in the disordered nanoporous medium

Similarity of the extrusion curves of non-wetting liquid in a nanoporous medium with different initial fill volume fractions is observed experimentally. The similarity can be explained by the scaling of the interface energy and the self-similarity of the infinite percolation cluster of fluid-filled pores. Understanding the physical processes leading to the observed phenomena is a foundation for the development of high-performance devices for damping and energy storage on the basis of such heterogeneous systems.     

Using of the Agglomeration-in-liquid for the Technology of the Fine Materials

The content of the fine and ultrafine particles in the raw material results in difficulty of the separation, the loss of the valuable components and ecological contamination. Secondary using of the fine particles is impossible without their granulation. This problem has been solved by the agglomeration-in-liquid method.An agglomeration-in-liquid method is a process to produce agglomerates in a liquid phase from solid particles suspended in the liquid. The surface of solid particles and the binding liquid must be of identical polarity, but the continuous phase must be of the opposite polarity. The water solutions of the surfactant are the binding liquids or the organic liquids.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

On the quality of the hardness kernel and the Fukui function to evaluate the global hardness

An approximated hardness kernel, which includes the second derivative with respect to the density of the kinetic energy, the electron-electron coulomb repulsion, and the exchange density functionals, has been tested for the calculation of the global hardness. The results obtained for a series of 40 cations and neutral systems and 16 anions represent in most cases an improvement of the results obtained using the HOMO-LUMO gap approach and indicate the viability of this approach to evaluate global hardness. In addition, the relevance of the Fukui function approximation and the role of the three components of the hardness kernel in the evaluation of the global hardness have been analyzed.     

Influence of the Position of the Connecting Spacer of the Chromophore on the Nonlinear Optical Response

A new chromophore, C1 , based on a similar DπA‐structure as in the FTC ‐chromophore but with a hydroxyalkyl spacer perpendicular to the direction of the dipole moment was synthesized. Both chromophores and the CLD ‐chromophore were used to prepare high T_g nonlinear optical vinyl polymers. The influence of the position of the spacer on the DπA‐system on the NLO response of the resulting polymers was investigated.

     

光亮剂对银电沉积行为的影响

用电势阶跃法和旋转圆盘电极法 (RDE)以及SEM和XRD测试手段 ,初步研究了光亮剂对氰化体系中银电沉积行为的影响 .研究表明 ,光亮剂的加入并未导致银电沉积成核机理的改变 ,但显著增强了镀液的微观平整效应 ,并且所得镀层的表观光滑程度明显改善 .XRD测试亦同时表明光亮剂的加入并未改变镀层的择优取向