Influence of a strong polyelectrolyte block on the formation and properties of polymer micelles with a mixed corona

Joint micellization of two amphiphilic diblock copolymers is studied by velocity sedimentation, transmission electron microscopy, electrophoretic mobility measurements, and static light scattering. One of the diblock copolymers is a strong polyelectrolyte (polystyrene-block-poly(N-ethyl-4-vinylpyridinium bromide)), while the second one is a weakly charged or uncharged copolymer (polystyrene-block-poly(acrylic acid) or polystyrene-block-poly(4-vinylpyridine)). It is shown that the mixing of the diblock copolymers in a selective aqueous-organic solvent (DMF-methanol-water) leads to the formation of joint (hybrid) micelles and that the composition of these micelles is close to the composition of the polymer mixture. Micelles consist of an insoluble polystyrene core and a mixed corona composed of blocks of a strong polyelectrolyte and a weakly charged or uncharged copolymer. Aqueous dispersions of mixed micelles are obtained with the use of the dialysis technique, the spherical morphology of the micelles is ascertained, and their three-layered structure is proposed. The nonlinear dependence of the molecular mass of micelles on their composition is found. The decisive effect of electrostatic repulsion between strong polyelectrolyte units on the thermodynamics of micellization and the dispersion stability and molecular-mass characteristics of the mixed micelles is demonstrated.     

Interactions Between Polymers and Nanoparticles: Formation of “Supermicellar” Hybrid Aggregates

Abstract

When polyelectrolyte‐neutral block copolymers are mixed in solutions to oppositely charged species (e.g., surfactant micelles, macromolecules, proteins, etc.), there is the formation of stable “supermicellar” aggregates combining both components. The resulting colloidal complexes exhibit a core‐shell structure, and the mechanism yielding to their formation is electrostatic self‐assembly. In this contribution, we report on the structural properties of “supermicellar” aggregates made from yttrium‐based inorganic nanoparticles (radius 2 nm) and polyelectrolyte‐neutral block copolymers in aqueous solutions. The yttrium hydroxyacetate particles were chosen as a model system for inorganic colloids, and also for their use in industrial applications as precursors for ceramic and opto‐electronic materials. The copolymers placed under scrutiny are the water‐soluble and asymmetric poly(sodium acrylate)‐b‐poly(acrylamide) diblocks. Using static and dynamical light‐scattering experiments, we demonstrate the analogy between surfactant micelles and nanoparticles in the complexation phenomenon with oppositely charged polymers. We also determine the sizes and the aggregation numbers of the hybrid organic–inorganic complexes. Several additional properties are discussed, such as the remarkable stability of the hybrid aggregates and the dependence of their sizes on the mixing conditions.     

Solubilization of homopolymers in a solution of diblock copolymers

We study theoretically mixed solutions of homopolymer and diblock copolymer chains. The solvent is a poor solvent for the homopolymers and a selective solvent for the copolymers. We find that the formation of copolymer micelles containing also the insoluble chains allows for an increased solubility of the homopolymers in the solution. In agreement with experiments, we find also that the solubilization power of the micelles, that is, the maximum amount of total homopolymer weight solubilized per unit weight of copolymers in solution, decreases strongly with the homopolymer index of polymerization.     

Water-soluble interpolyelectrolyte complexes of polyisobutylene-block-poly(methacrylic acid) micelles: formation and properties

We report on interpolyelectrolyte complexes (IPECs) formed by micelles of ionic amphiphilic diblock copolymers with polyisobutylene (PIB) and poly(sodium methacrylate) (PMANa) blocks interacting with quaternized poly(4-vinylpyridine) (P4VPQ). The interpolyelectrolyte complexation was followed by turbidimetry and small angle neutron scattering (SANS). The data obtained by means of a combination of SANS, dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryo-TEM) provide evidence on the core-shell-corona structure of the complex species with the shell assembled from fragments of electrostatically bound PMANa and quaternized P4VPQ fragments, original PIBx-b-PMAAy micelles apparently playing a lyophilizing part. The complex formation is followed by potentiometric titration as well. This process is initially kinetically controlled. In the second step larger aggregates rearrange in favor of smaller complexes with core-shell-corona structure, which are thermodynamically more stable. An increase in ionic strength of the solution results in dissociation of the complex species as proven by SANS and analytical ultracentrifugation (AUC). This process begins at the certain threshold ionic strength and proceeds via a salt-induced gradual release of chains of the cationic polyectrolyte from the complex species.     

From well‐defined diblock copolymers prepared by a versatile atom transfer radical polymerization method to supramolecular assemblies

The synthesis of well‐defined diblock copolymers by atom transfer radical polymerization (ATRP) was explored in detail for the development of new colloidal carriers. The ATRP technique allowed the preparation of diblock copolymers of poly(ethylene glycol) (PEG) (number‐average molecular weight: 2000) and ionic or nonionizable hydrophobic segments. Using monofunctionalized PEG macroinitiator, ionizable and hydrophobic monomers were polymerized to obtain the diblock copolymers. This polymerization method provided good control over molecular weights and molecular weight distributions, with monomer conversions as high as 98%. Moreover, the copolymerization of hydrophobic and ionizable monomers using the PEG macroinitiator made it possible to modulate the physicochemical properties of the resulting polymers in solution. Depending on the length and nature of the hydrophobic segment, the nonionic copolymers could self‐assemble in water into nanoparticles or polymeric micelles. For example, the copolymers having a short hydrophobic block (5 < degree of polymerization < 9) formed polymeric micelles in aqueous solution, with an apparent critical association concentration between 2 and 20 mg/L. The interchain association of PEG‐based polymethacrylic acid derivatives was found to be pH‐dependent and occurred at low pH. The amphiphilic and nonionic copolymers could be suitable for the solubilization and delivery of water‐insoluble drugs, whereas the ionic diblock copolymers offer promising characteristics for the delivery of electrostatically charged compounds (e.g., DNA) through the formation of polyion complex micelles. Thus, ATRP represents a promising technique for the design of new multiblock copolymers in drug delivery. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3861–3874, 2001     

Formation of DNA complexes with diblock copolymers of poly(N-(2-hydroxypropyl) methacrylamide) and polycations

The self-assembly of calf thymus DNA with diblock copolymers of poly(N-(2-hydroxypropyl)methacrylamide) (HPMA) and polycations (PC) with amino or quaternary ammonium groups in their side chains was tested by static and dynamic light scattering methods in aqueous 0.15 M NaCl. We have observed formation of well defined clusters of single DNA interpolyelectrolyte complexes with hydrodynamic radii of about 300 nm. Long-term size stability of clusters has been found to be a function of chemical structure of PC and of diblock copolymer composition. The most stable clusters were obtained by DNA association with diblock copolymers consisting of a poly(HPMA) block (A) and polycation block (B) with quaternary ammonium groups in their side chains, with molecular weight of A block higher than that of B. In the opposite case, lower molecular weight of A block, slow aggregation of SIPEC clusters was observed. The micelle-like structure was proposed for these clusters.     

Block copolymer micelles in aqueous media

Polystyrene-block-poly(methacrylic acid) and poly(methacrylic acid)-block-polystyrene-block-poly(methacrylic acid) di- and triblock copolymers form micelles with polystyrene cores and poly(methacrylic acid) shells when dissolved in water/1, 4-dioxane mixtures, rich in dioxane. These micelles can be transferred into water rich mixtures, into water, and into aqueous buffers by stepwise dialysis. Quasielastic light scattering and sedimentation velocity experiments show that in dioxane rich mixtures exists a dynamic micellization equilibrium, while in dioxane poor solutions and in aqueous buffers the equilibrium is frozen. The process of mixed micelles formation was observed in dioxane rich solutions.     

Micellar characteristics of diblock polyacrylate-polyethylene oxide copolymers in aqueous media

The formation and structural features of micelles from low molecular weight diblock copolymers of poly(methylmethacrylate-b-ethylene oxide) PMMA-PEO (varying in total molecular weight) and poly(butylmethacrylate-b-ethylene oxide) PBMA-PEO in water, aqueous NaCl and urea solutions were examined by surface tension, dye spectral, cloud point, viscosity and small angle neutron scattering (SANS) measurements. The increasing concentrations of NaCl reduce the onset concentration of micellization and phase separation, while urea has reverse effect. The analysis of the SANS curves revealed the presence of prolate ellipsoidal micelles in diblock copolymers at various experimental concentrations and temperatures studied. The effect of temperature, NaCl and urea on the neutron scattering profiles are more or less the same which is well supported by viscosity and surface tension measurements. The diblock copolymers form spherical micelles of aggregation number in the range of 522-664. The micelles are very temperature stable.     

Molecular bottle brushes in a solution of semiflexible polyelectrolytes and block copolymers with an oppositely charged block: a molecular dynamics simulation

Using a coarse-grained model, we performed molecular dynamics simulations of the electrostatically driven self-assembly of strongly charged polyelectrolytes and diblock copolymers composed of oppositely charged and neutral blocks. Stoichiometric micelle-like complexes formed in a dilute solution represent cylindrical brushes whose conformation is determined by the linear charge density on the polyelectrolyte and by temperature. The core-shell morphology of the cylindrical brushes is proven. The core of these anisotropic micelles consists of an insoluble complex coacervate formed by the ionic chains and a shell made up of the neutral solvophilic blocks. As the concentration of macromolecules increases, the orientational ordering of ionic micelles takes place. The complexation can induce effective steric stiffening of the polyelectrolyte chains.     

三嵌段共聚物和两嵌段共聚物在水溶液中共混自组装成多室胶束结构的耗散粒子动力学模拟(英文)

利用耗散粒子动力学模拟研究了在水溶液中混合不同的线形三嵌段共聚物AxByCz和线形两嵌段共聚物AmBn对多室胶束的形貌多样性的影响.通过改变线形的三嵌段共聚物和两嵌段共聚物的链长来寻找多室胶束的形成条件.由线形三嵌段共聚物和线形两嵌段共聚物的不同混合形成的多室胶束结构是多种多样的,例如"蠕虫状"胶束、"汉堡包"胶束、"球上球"胶束、"核-壳-壳"胶束等等.多室胶束的整体形貌和内部结构的控制都可以从线形三嵌段共聚物和两嵌段共聚物的二元共混得到.为了表征获得的多室胶束结构,我们计算了密度图和成对分布函数图.在此工作中,可以获得和观察到复杂的多室胶束.结果表明,简单地混合线形的三嵌段共聚物和线形的两嵌段共聚物是一个控制多室胶束形貌和结构的有效方法,在工程实验中可以更简单更经济地形成多室胶束结构.因此,在设计新的多室胶束方面,聚合物共混仍然是未来值得更加关注的一个话题.     

Ionic micelles in solutions of polyelectrolytes and block copolymers with oppositely charged blocks: Computer simulation

Complexation in solutions of strongly charged polyelectrolytes and diblock copolymers composed of oppositely charged and neutral blocks were studied via the molecular dynamics method. Stoichiometric micellar complexes formed in a dilute solution represent cylindrical brushes whose conformation is determined by the linear charge density on the polyelectrolyte and by temperature. As the concentration of macromolecules increases, the orientational ordering of anisotropic ionic micelles takes place. The complexation can induce the stiffening of the polyelectrolyte chain.     

Effect of polystyrene‐b‐poly(ethylene oxide) on self‐assembly of polystyrene‐b‐poly(N‐isopropylacrylamide) in aqueous solution

Mixed micelles of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) and two polystyrene‐b‐poly(ethylene oxide) diblock copolymers (PS‐b‐PEO) with different chain lengths of polystyrene in aqueous solution were prepared by adding the tetrahydrofuran solutions dropwise into an excess of water. The formation and stabilization of the resultant mixed micelles were characterized by using a combination of static and dynamic light scattering. Increasing the initial concentration of PS‐b‐PEO in THF led to a decrease in the size and the weight average molar mass (〈M_w〉) of the mixed micelles when the initial concentration of PS‐b‐ PNIPAM was kept as 1 × 10^?3 g/mL. The PS‐b‐PEO with shorter PS block has a more pronounced effect on the change of the size and 〈M_w〉 than that with longer PS block. The number of PS‐b‐PNIPAM in each mixed micelle decreased with the addition of PS‐b‐PEO. The average hydrodynamic radius 〈R_h〉 and average radius of gyration 〈R_g〉 of pure PS‐b‐PNIPAM and mixed micelles gradually decreased with the increase in the temperature. Both the pure micelles and mixed micelles were stable in the temperature range of 18 °C–39 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1168–1174, 2010     

Effect of concentration regime on rheological properties of sodium polymethacrylate and its complexes with polystyrene-poly(N-ethyl-4-vinylpyridinium bromide) block copolymer in aqueous salt solution

The effect of concentration on the behavior of high-molecular-mass sodium polymethacrylate (M _w = 3.9 × 10⁵) in a 0.1 M NaCl aqueous solution was studied by the methods of dynamic and static light scattering, and capillary and rotational viscometry. It was shown that the concentration corresponding to the formation of fluctuation network of polyelectrolyte entanglements (6.4%) is substantially higher than the crossover concentration (0.25%). This fact indicates the existence of a wide concentration interval for a semidilute unentangled polyanion solution. The introduction of minor amounts of micelles of cationic amphiphilic polystyrene-poly(N-ethyl-4-vinylpyridinium bromide) diblock copolymer is accompanied by the development of the network of an interpolyelectrolyte complex. The junctions of this network are diblock copolymer micelles that are linked to polyanion macromolecules via salt bonds. The formation of interpolyelectrolyte network leads to the additional structuring of the sodium polymethacrylate solution and an increase in its viscosity. The growth in viscosity is most pronounced in the concentration region above the concentration corresponding to the formation of entanglement network of the free polyanion.     

Complex coacervation core micelles. Colloidal stability and aggregation mechanism

Complex coacervation core micelles were prepared with various polyelectrolytes and oppositely charged diblock copolymers. The diblock copolymers consist of a charged block and a water-soluble neutral block. Our experimental technique was dynamic light scattering in combination with titrations. At mixing ratios where the excess charge of the polyelectrolyte mixture is approximately zero, micelles may be formed. The colloidal stability of these micelles depends on the block lengths of the diblock copolymers and the molecular weight of the homopolymers. In addition, the chemical nature of the corona blocks and nature of the ionic groups of the polyelectrolytes also influence the stability and aggregation mechanism. A corona block that is three times longer than the core block is a prerequisite for stable micelles. If this ratio is further increased, the molecular weight of the homopolymers as well as the type of the ionic groups starts to play a major role. With very asymmetric block length ratios, no micelles are formed. In addition, if the neutral block is too short, the polymeric mixture forms a macroscopic precipitate. With a constant core block, the aggregation number decreases with increasing corona block length, as is predicted by scaling models for polymeric micelles with a neutral corona.     

pH Responsivity and micelle formation of gradient copolymers of methacrylic acid and methyl methacrylate in aqueous solution

A series of gradient copolymers of methacrylic acid (MAA)/methyl methacrylate (MMA) with four end-to-end composition profiles (uniform, linear gradient, triblock with linear gradient midblock, and diblock) but all having an average chain composition of ?F(MMA) ≈ 0.5 and an average chain length of 200 were synthesized via model-based, computer-programmed, semibatch atom-transfer radical copolymerization (ATRcoP). These samples allowed us to investigate systematically the effects of the gradient composition profile on the pH responsivity and micelle formation of the copolymers in an aqueous solution. Measurements included light transmittance, TEM, AFM, DLS, (1)H NMR, and pH titration. It was found that linear gradient, triblock, and diblock copolymers formed spherical micelles at high pH. The micelles of the linear gradient copolymer contained MMA units in their hydrophilic shells, and those of the triblock and diblock copolymers had all of their MMA units residing in their cores. The composition profile showed a strong effect on the degree of acid dissociation at a given pH. The conformational transition of the copolymer chains was determined by both the pH value and composition profile. Copolymers having sharper gradients required a lower pH to trigger the conformational transition and a narrower pH range to complete the transition.     

Stoichiometric polyelectrolyte complexes of ionic block copolymers and oppositely charged polyions

Micellization in dilute solutions of diblock copolymers with a polyelectrolyte and a hydrophilic nonionic blocks and oppositely charged polyions is studied using mean-field theory. In aqueous solutions the micelle core consists of the polyelectrolyte complex (PEC) while the corona is formed by hydrophilic blocks of the block copolymers. Describing PEC as a globule in the framework of the Lifshitz [Zh. Eksp. Teor. Fiz. 55, 2408 (1968)] globule theory we calculate the surface tension of the micellar core/solvent interface as a function of the polyion degree of ionization, solvent quality, and concentration of low-molecular-mass salt. The equilibrium aggregation number of starlike micelles formed by block copolymers and homopolymers of opposite charge at stoichiometric mixture compositions is found as a function of the system parameters. It is shown that micelles disintegrate upon addition of salt.     

Environmentally responsive micelles from polystyrene–poly[bis(potassium carboxylatophenoxy)phosphazene] block copolymers

Amphiphilic diblock copolymers that contained hydrophilic poly[bis(potassium carboxylatophenoxy)phosphazene] segments and hydrophobic polystyrene sections were synthesized via the controlled cationic polymerization of Cl₃P?NSiMe₃ with a polystyrenyl–phosphoranimine as a macromolecular terminator. These block copolymers self‐associated in aqueous media to form micellar structures which were investigated by fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. The size and shape of the micelles were not affected by the introduction of different monovalent cations (Li⁺, K⁺, Na⁺, and Cs⁺) into the stable micellar solutions. However, exposure to divalent cations induced intermicellar crosslinking through carboxylate groups, which caused precipitation of the ionically crosslinked aggregates from solution. This micelle‐coupling behavior was reversible: the subsequent addition of monovalent cations caused the redispersion of the polystyrene‐block‐poly[bis(potassium carboxylatophenoxy)phosphazene] (PS–KPCPP) block copolymers into a stable micellar solution. Aqueous micellar solutions of PS–KPCPP copolymers also showed pH‐dependent behavior. These attributes make PS–KPCPP block copolymers suitable for studies of guest retention and release in response to ion charge and pH. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2912–2920, 2005     

Novel fluoroalkyl end-capped amphiphilic diblock copolymers with pH/temperature response and self-assembly behavior

A series of fluoroalkyl end-capped diblock copolymers of poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMAEMA or PDMA) and poly[2-(N,N-diethylamino)ethyl methacrylate] (PDEAEMA or PDEA) have been synthesized via oxyanion-initiated polymerization, in which a potassium alcoholate of 4,4,5,5,6,6,7,7,7-nonafluoro-1-heptanol (NFHOK) was used as an initiator. The chemical structures of the NFHO-PDMA-b-PDEA and NFHO-PDEA-b-PDMA depended on the addition sequence of the two monomers and the feeding molar ratios of [DMA] to [DEA] during the polymerization process. These copolymers have been characterized by (1)H NMR and (19)F NMR spectroscopy and gel permeation chromatography (GPC). The aggregation behavior of these copolymers in aqueous solutions at different pH media was studied using a combination of surface tension, fluorescence probe, and transmission electron microscopy (TEM). Both diblock copolymers exhibited distinct pH/temperature-responsive properties. The critical aggregation concentrations (cacs) of these copolymers have been investigated, and the results showed that these copolymers possess excellent surface activity. Besides, these fluoroalkyl end-capped diblock copolymers showed pH-induced lower critical solution temperatures (LCSTs) in water. TEM analysis indicated that the NFHO-PDMA(30)-b-PDEA(10) diblock copolymers can self-assemble into the multicompartment micelles in aqueous solutions under basic conditions, in which the pH value is higher than the pKa values of both PDMA and PDEA homopolymers, while the NFHO-PDEA(10)-b-PDMA(30) diblock copolymers can form flowerlike micelles in basic aqueous solution.     

Self-assembly of charged amphiphilic diblock copolymers with insoluble blocks of decreasing hydrophobicity: from kinetically frozen colloids to macrosurfactants

We have investigated the self-assembly properties in aqueous solution of amphiphilic diblock copolymers with insoluble blocks of different hydrophobicity and demonstrated that the condition to obtain dynamic micelles is to design samples with insoluble blocks of low enough hydrophobicity. We focus here on results with new water-soluble amphiphilic diblock copolymers poly(diethyleneglycol ethylether acrylate)-b-poly(acrylic acid), or PDEGA-b-PAA. The physical characteristics of PDEGA-b-PAA micelles at high ionization have been determined by small angle neutron scattering (SANS). We show that PDEGA-b-PAA samples form micelles at thermodynamic equilibrium. The critical micelle concentrations (CMCs) decrease strongly with ionic strength and temperature due to a solvent quality decrease for, respectively, the corona and the core. This behavior of reversible aggregation is remarkable as compared to the behavior of kinetically frozen aggregation that has been widely observed with samples of similar architecture and different hydrophobic blocks, for example, poly(styrene)-b-poly(acrylic acid), PS-b-PAA, and poly(butyl acrylate)-b-poly(acrylic acid), PBA-b-PAA. We have measured the interfacial tension between water and the homopolymers PDEGA and PBA at, respectively, 3 and 20 mN/m at room temperature, which permits one to estimate the energy cost to extract a unimer from a micelle. The results are consistent with a micelle association that is fast for PDEGA-b-PAA and kinetically frozen PBA-b-PAA. Hence, PDEGA-b-PAA samples form a new system of synthetic charged macrosurfactant with unique properties of fast dynamic association, tunable charge, and water solubility even at temperatures and NaCl concentrations as high as 65 °C and 1 M.