Continuous and gradient TLC development of 4-dimethylaminoazobenzene-4′-sulfonyl amino acid derivatives

Thin-layer gradient elution chromatography is a convenient technique for separation of very complicated mixtures; in some cases the gradient technique can be replaced by continuous development. The two techniques are compared in practice by using them to separate a mixture of dabsyl derivatives of amino acids.     

Computer simulation as a means of developing an optimized reversed-phase gradient-elution separation

Summary A personal-computer program (DryLab G) is described for the simulation of reversed-phase gradient-elution separations. After two experimental gradient runs are carried out initially, this program allows the user to develop a final separation by varying gradient conditions (gradient time, initial and final %-organic in the mobile phase, gradient shape), column dimensions, flowrate and particle size. This approach takes advantage of “solvent-strength selectivity”, as reported recently [28] for isocratic separations. Method development using this procedure can result in better separations with much less effort. Examples of its validation and application are presented.     

Probing the kinetic performance limits for ion chromatography. II. Gradient conditions for small ions

A gradient kinetic plot method is used for theoretical characterisation of the performance of polymeric particulate anion exchange columns for gradient separations of small inorganic anions. The method employed requires only information obtained from a series of isocratic column performance measurements and in silico predictions of retention time and peak width under gradient conditions. Results obtained under practically constrained conditions provide parameters for the generation of high peak capacities and rapid peak production for fast analysis to be determined. Using this prediction method, a maximum theoretical peak capacity of 84 could be used to achieve separation of 26 components using a 120 min gradient (R_s > 1). This approach provides a highly convenient tool for development of both mono- and multidimensional ion chromatography (IC) methodologies as it yields comprehensive understanding of the influence of gradient slope, analysis time, column length and temperature upon kinetically optimised gradient performance.     

Method for Gradient Elution in Micro-Flow Liquid Chromatography

This paper describes a new method for gradient elution at low flow rate. By adjusting the solvent composition flowing into a dynamic mixer, we can program the concentration of solvent, B, inside a dynamic mixer to form a time-resolved solvent gradient delivered to the column. The input gradient is related to the output gradient by the equation, B_in = B_out + τ × dB_out/dt, in which τ is the gradient response time constant at specified flow rate, and B_in and B_out are input and output concentration of solvent B, respectively.     

Inkjet printing of laminin gradient to investigate endothelial cellular alignment

To investigate the influence of the protein surface-density gradient on endothelial cell alignment, a novel approach for the fabrication of a laminin gradient on gold-coated substrates has been developed in this study. Our approach involves programmed inkjet printing of an alkanethiol (11-mercaptoundecanoic acid, C₁₀COOH, MUA) gradient onto gold-coated substrates, followed by backfilling with 11-mercapto-1-undecanol (C₁₁OH, MUD). The –COOH moieties were activated and then covalently linked with laminin. This treatment led to a surface-density gradient of laminin. Contact angle measurement, X-ray photoelectron spectroscopy (XPS) and fluorescence microscopy were employed to characterize the self-assembled monolayers (SAMs) and protein gradient, respectively. Results proved the feasibility of the fabrication of a protein gradient by using the inkjet printing technique. The self-assembled monolayer gradients displayed a high packing density, as indicated by dynamic contact angle measurement. More importantly, the gradient slope was easily tunable over a significant distance from 20 to 30 mm. The laminin gradient was clearly visible by fluorescence microscopy observation. Endothelial cells cultured on the surface-density gradient of laminin demonstrated a strong alignment tendency in parallel to the gradient. The higher the laminin density the more cells were observed. The result indicates that cell attachment is dependent on the surface density of laminin. This work broadens our methodology to investigate chemical stimuli-induced cell directional alignment. It is potentially important for understanding cell alignment/ingrowth behavior for angiogenesis and implant technology including tissue-engineered structures.     

Interconversion of gradient and isocratic retention data in reversed-phase liquid chromatography: Effect of the uptake of eluent modifier on the retention of analytes

The experimental technique of mass spectrometric tracer pulse chromatography was used to study the effect of the sorption of eluent components by a C₁₈-bonded silica RPLC packing on the retention of a series of test analytes during isocratic and gradient elution experiments. The analytes of interest were a substituted phenol, a substituted nitroaniline, an anti-malaria drug, tetrahydrofuran, and methanol. The eluent used was a mixture of acetonitrile and water. The solutes and isotopically labeled eluent components were injected at fixed time intervals during each gradient run. The mass specific detector allowed the assignment of individual analyte peaks even when there was overlap in the chromatograms from successive injections. Thus, the retention time of each analyte could be determined as a function of gradient slope and initial eluent composition at the time of each injection. Experimental gradient retention time data were then compared with the calculated results from two theoretical models. The first model assumed the velocity of the mobile phase and eluent were equal. The second and most realistic model assumed the velocity of the eluent was less than the velocity of the mobile phase due to the uptake of eluent by the stationary phase. Gradient retention times predicted by the two models were reasonably accurate with the sorption model giving slightly more accurate values. Inverse calculations, i.e., calculation of isocratic retention factors from gradient elution data were also carried out with very similar results. That is, the model allowing for the uptake of eluent was slightly more accurate than the model assuming no eluent-stationary phase interaction.     

Computer-assisted optimization of mobile phase compositions and development distance selectivity in gradient two-step development high-performance thin-layer chromatography

A computer-assisted method is presented for optimization of mobile phase compositions and development distance in gradient two-step development HPTLC. The method is based on a system which can predict the final Rf values for gradient two-step development from values measured using five preliminary runs. The statistical scanning method is then used for optimization, using Rf difference as the selection criterion. The method was evaluated using a mixture of eight components. Excellent agreement was obtained between predicted and experimental results. Gradient two-step development HPTLC, mobile phase composition optimization, velopment distance optimizationde-     

Gradient elution in counter-current chromatography: a new layout for an old path

Gradient elution in CCC is a powerful tool, which needs further systematic development to become robust and easy to use. The first attempt to build a correlation between gradient elution profile and distribution ratio (K(D)) values for model mixtures containing typical representatives of pharmaceutical compounds is presented in this paper. The three step estimation of the solvent system composition of a heptane-ethyl acetate-methanol-water (HEMWat) series is described. The estimation is based on simple measurements of initial and final stationary phase retention for gradient elution run, calculating gradient distribution ratio and correlating it with static K(D) against HEMWat number.     

Modeling of salt and pH gradient elution in ion‐exchange chromatography

The separation of proteins by internally and externally generated pH gradients in chromatofocusing on ion‐exchange columns is a well‐established analytical method with a large number of applications. In this work, a stoichiometric displacement model was used to describe the retention behavior of lysozyme on SP Sepharose FF and a monoclonal antibody on Fractogel SO₃ (S) in linear salt and pH gradient elution. The pH dependence of the binding charge B in the linear gradient elution model is introduced using a protein net charge model, while the pH dependence of the equilibrium constant is based on a thermodynamic approach. The model parameter and pH dependences are calculated from linear salt gradient elutions at different pH values as well as from linear pH gradient elutions at different fixed salt concentrations. The application of the model for the well‐characterized protein lysozyme resulted in almost identical model parameters based on either linear salt or pH gradient elution data. For the antibody, only the approach based on linear pH gradients is feasible because of the limited pH range useful for salt gradient elution. The application of the model for the separation of an acid variant of the antibody from the major monomeric form is discussed.     

A method for producing gradient density aerogel

The Stardust Mission used gradient density aerogel as the hypervelocity particle capture medium in both the cometary and interstellar collection grids. The development and production of these materials was performed exclusively for this mission as a means of improving the efficiency of the collection process. The density of an aerogel can be dictated by controlling the ratio of the condensable silica to that of the solvent used in the aerogel precursor solution. A density gradient was established by gradually mixing the precursor solution for low density aerogel into the precursor solution for high density aerogel and continuously pumping the resultant mixture into a mold. The aerogel designed for the capture of cometary particles had a density gradient ranging from 10 mg/cm³ to 50 mg/cm³ across the 3 cm profile of each block. Whereas those designed for the capture of interstellar grains had a gradient ranging from 10 mg/cm³ to 20 mg/cm³ across a 1 cm profile. Since various physical properties, e.g., refractive index, thermal conductivity, acoustic impedance, dielectric constant, are correlated to the density, they also vary with the density. This method of establishing a density gradient in aerogel can be used to produce other material gradients, e.g., gradient oxide, gradient dopant, in any sol–gel based material.     

聚合物梯度结构及其梯度功能复合材料研究的最新进展

聚合物梯度材料由于其独特的结构以及优异的性能逐渐成为聚合物基复合材料领域的研究热点。本文结合国内外对聚合物梯度结构以及梯度功能复合材料的最新研究现状,介绍了聚合物梯度材料的制备方法,根据制备原理的不同,其主要可以分为外界场法和物理化学法两大类;然后重点介绍了聚合物梯度材料的结构表征的新方法-高通量组合法,该方法不但可以...     

A gradient extremal walking algorithm

Gradient extremals define stream beds connecting stationary points on molecular potential energy surfaces. Using this concept we have developed an algorithm to determine transition states. We initiate walks at equilibrium geometries and follow the gradient extremals until a stationary point is reached. As an illustration we have investigated the mechanism for exchange of protons on carbon in methylenimine (H₂C=NH) using a multi-reference self-consistent-field wave function.     

Gradient Graphdiyne Induced Copper and Oxygen Vacancies in Cu0.95V2O5 Anodes for Fast-Charging Lithium-Ion Batteries

Vacancies can significantly affect the performance of metal oxide materials. Here, a gradient graphdiyne (GDY) induced Cu/O-dual-vacancies abundant Cu_0.95V₂O₅@GDY heterostructure material has been prepared as a competitive fast-charging anode material. Cu_0.95V₂O₅ self-catalyzes the growth of gradient GDY with rich alkyne-alkene complex in the inner layer and rich alkyne bonds in the outer layer, leading to the formation of Cu and O vacancies in Cu_0.95V₂O₅. The synergistic effect of vacancies and gradient GDY results in the electron redistribution at the hetero-interface to drive the generation of a built-in electric field. Thus, the Li-ion transport kinetics, electrochemical reaction reversibility and Li storage sites of Cu_0.95V₂O₅ are greatly enhanced. The Cu_0.95V₂O₅@GDY anodes show excellent fast-charging performance with high capacities and negligible capacity decay for 10 000 cycles and 20 000 cycles at extremely high current densities of 5 A g⁻¹ and 10 A g⁻¹, respectively. Over 30 % of capacity can be delivered in 35 seconds.     

A spatially resolved nucleic acid biochip based on a gradient of density of immobilized probe oligonucleotide

The potential for a new biochip design based on a continuous gradient of density of immobilized single-stranded DNA oligonucleotide probes (ssDNA) is explored. This gradient resolved information platform (GRIP) can provide sequence identification based on the spatial location and extent of hybridization by a target sequence. Surfaces based on indium-tin oxide (ITO) on glass were first functionalized by 3-aminopropyltriethoxysilane (APTES) followed by attachment of glutaraldehyde, prior to immobilization of oligonucleotide probe that was terminated with amine. The use of Cy₃ and Cy₅ dye-labelled ssDNA probes and targets allowed estimation of density and correlation of the location of binding of labelled targets. Probe molecules of 20 mer lengths were loaded to produce density gradients in the range of 1.0-200 ng/mm². The biochips could resolve a mixture of fully complementary five base-pair mismatched targets by the location of binding on the surface. Thermal control provided additional selectivity. Thermal cycling and washing provided for regeneration of the surface, and the fluorescence intensities showed no deterioration in at least five cycles of hybridization reactions.     

Following the streambed reaction on potential-energy surfaces: a new robust method

A simple procedure with low computational efforts is proposed to follow the reaction path of the potential-energy hypersurface (PES) starting from minima or saddle points. The method uses a modification of the so-called “following the reduced gradient” [Quapp W, Hirsch M, Imig O, Heidrich D (1998) J Comput Chem 19:1087]. The original method connects points where the gradient has a constant direction. In the present article the procedure is replaced by taking iterative varying directions of the gradient controlled by the last tangent of the searched curve. The resulting minimum energy path is that valley floor gradient extremal (GE) which belongs to the smallest (absolute) eigenvalue of the Hessian and, hence, that GE which usually leads along the streambed of a chemical reaction. The new method avoids third derivatives of the PES and obtains the GE of least ascent by second-order calculations only. Nevertheless, we are able to follow the streambed GE uphill or downhill. We can connect a minimum with its saddles if the streambed leads up to a saddle, or we find a turning point or a bifurcation point. The effectiveness and the characteristic properties of the new algorithm are demonstrated by using polynomial test surfaces, an ab initio PES of H₂O, and the analytic potentials of Lennard-Jones (LJ) clusters. By tracing the streambeds we located previously identified saddle points for LJ _N with N=3, 7, 8, and 55. Saddles for LJ _N with N=15, 20, and 30 as presented here are new results. Received: 8 March 2000 / Accepted: 17 July 2000 / Published online: 24 October 2000     

Fast ion chromatography using short anion exchange columns

A fast ion chromatographic system is described which uses shorter column lengths and compares various eluent profiles in order to maximise the performance without sacrificing the chromatographic resolution. Both isocratic and gradient elution profiles were considered to find the most efficient mode of separation. The separation and determination of seven target anions (chloride, chlorate, nitrate, chromate, sulfate, thiocyanate and perchlorate) was achieved using a short (4 mm ID, 50 mm long) column packed with Dionex AS20 high-capacity anion exchange material. A hydroxide eluent was used at an initial concentration of 25 mM (at a flow-rate of 1.0 mL/min) and two performance maxima were found. The maximum efficiency occurred at a normalised gradient ramp rate of 5 mM/t₀, resulting in a peak capacity of 16, while the fastest separation (<3 min) occurred at a normalised ramp rate of 30 mM/t₀. The retention time, peak width and resolution using the different eluent profiles on varying column lengths is also compared. Further investigations in this study determined that the highest peak capacity separation under gradient conditions could be approximated using an isocratic separation. The advantage of using this novel approach to approximate the maximum efficiency separation removes the need for column re-equilibration that is required for gradient elution resulting in faster analyses and enhanced sample throughput, with benefits in particular for multidimensional chromatography.     

Some solutions to obtain very efficient separations in isocratic and gradient modes using small particles size and ultra-high pressure

The UHPLC strategy which combines sub-2 μm porous particles and ultra-high pressure (>1000 bar) was investigated considering very high resolution criteria in both isocratic and gradient modes, with mobile phase temperatures between 30 and 90 °C. In isocratic mode, experimental conditions to reach the maximal efficiency were determined using the kinetic plot representation for ΔP_max = 1000 bar. It has been first confirmed that the molecular weight of the compounds (MW) was a critical parameter which should be considered in the construction of such curves. With a MW around 1000 g mol⁻¹, efficiencies as high as 300,000 plates could be theoretically attained using UHPLC at 30 °C. By limiting the column length to 450 mm, the maximal plate count was around 100,000. In gradient mode, the longest column does not provide the maximal peak capacity for a given analysis time in UHPLC. This was attributed to the fact that peak capacity is not only related to the plate number but also to column dead time. Therefore, a compromise should be found and a 150 mm column should be preferentially selected for gradient lengths up to 60 min at 30 °C, while the columns coupled in series (3× 150 mm) were attractive only for t_grad > 250 min. Compared to 30 °C, peak capacities were increased by about 20–30% for a constant gradient length at 90 °C and gradient time decreased by 2-fold for an identical peak capacity.     

Development and validation of a generic high‐performance liquid chromatography for the simultaneous separation and determination of six cough ingredients: Robustness study on core–shell particles

A generally applicable high‐performance liquid chromatographic method for the qualitative and quantitative determination of pharmaceutical preparations containing phenylephrine hydrochloride, paracetamol, ephedrine hydrochloride, guaifenesin, doxylamine succinate, and dextromethorphan hydrobromide is developed. Optimization of chromatographic conditions was performed for the gradient elution using different buffer pH values, flow rates and two C₁₈ stationary phases. The method was developed using a Kinetex® C₁₈ column as a core–shell stationary phase with a gradient profile using buffer pH 5.0 and acetonitrile at 2.0 mL/min flow rate. Detection was carried out at 220 nm and linear calibrations were obtained for all components within the studied ranges. The method was fully validated in agreement with ICH guidelines. The proposed method is specific, accurate and precise (RSD% < 3%). Limits of detection are lower than 2.0 μg/mL. Qualitative and quantitative responses were evaluated using experimental design to assist the method robustness. The method was proved to be highly robust against 10% change in buffer pH and flow rate (RSD% < 10%), however, the flow rate may significantly influence the quantitative responses of phenylephrine, paracetamol, and doxylamine (RSD% > 10%). Satisfactory results were obtained for commercial combinations analyses. Statistical comparison between the proposed chromatographic and official methods revealed no significant difference.     

Automated off-line optimisation of programmed elutions in reversed-phase high-performance liquid chromatography using ternary solvent mixtures

A new system for the unattended optimisation of gradient elutions in reversed-phase high-performance liquid chromatography has been developed. The system is based on the simulation of retention times under conditions of ternary solvent mixtures and ternary gradient programmes. This model is constructed departing from a few experimental data obtained in isocratic elutions and validated against experimental gradient elutions. Once validated, this retention model can be used for the unattended search of an optimum separation. The optimisation process is driven by an evolutionary algorithm (EA), specially developed to map the ternary gradient elutions problem. The development and characteristics of the retention modelling as well as those of the EA and its particularities are discussed and some real world examples of separation presented.     

Study of dielectric characteristics of graded Ba<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Zr<Subscript>0.05</Subscript>Ti<Subscript>0.95</Subscript>O<Subscript>3</Subscript> thin films grown by a sol-gel process

The compositionally graded Ba_1−xCa_xZr_0.05Ti_0.95O₃ (x = 0, 0.05, 0.10) (BCZT) thin films with compositional gradient from BaZr_0.05Ti_0.95O₃ to Ba_0.90Ca_0.10Zr_0.05Ti_0.95O₃ were deposited on Pt/Ti/SiO₂/Si substrates by sol-gel processing. The crystal structure of the thin films was determined by X-ray diffraction. Field emission scanning electron microscopy (FESEM) was used to examine crystallite size and morphology of compositionally graded thin films. The dielectric properties of compositionally graded thin films were characterized by measuring the dielectric constant and dielectric loss as a function of temperature, applied electric field and frequency. As a result, compositionally graded thin films with weak temperature dependence were realized. Dielectric constant peaks, common to a ferroelectric transition, were not observed in the temperature range from 298 to 413 K. The compositionally graded BCZT thin films with weak temperature dependence of tunability could be attractive materials for frequency and phase agile tunable microwave components such as tunable filters, tunable oscillators, and phase shifters for application in phased array antennas.