Preparation and characterization of poly(amide-imide)/ZnO nanocomposites containing pendent benzoxazole and benzimidazole segments

In the present investigation, novel poly(amid-imide)/zinc oxide nanocomposites (PAI/ZnO NCs) containing benzoxazole and benzimidazole pendent groups with different amounts of modified zinc oxide nanoparticles (ZnO NPs) were successfully prepared via the ex situ method. Poly(amid-imide) (PAI) was prepared by direct polycondensation of 2-[3,5- bis(N-trimellitimidoyl)phenyl]benzoxazole (DCA) with 5-(2-benzimidazole)-1,3-phenylenediamine (DAMI) and provided the polymeric matrix with well-designed groups. The surface of ZnO NPs was functionalized with 3-aminopropyltriethoxysilane (APS) coupling agent to have a better dispersion and enhancing possible interactions of NPs with functional groups of polymer matrix. The amount of APS bonded to the ZnO surface was determined by thermogravimetric analysis. PAI/ZnO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). SEM analysis showed that the modified ZnO nanoparticles were homogeneously dispersed in polymer matrix. In addition, TGA data indicated an enhancement of thermal stability of the nanocomposite compared with the neat polymer.     

Preparation and characterization of new poly(amide–imide) reinforced layer silicate nanocomposite containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid

Two new samples of poly(amide–imide)/montmorillonite reinforced nanocomposites containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide–imide) (PAI) 3 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N,N′-pyrromelitoyl-bis-l-phenyl acetic acid 1 with 4,4′-diamino diphenyl ether 2 in the presence of triphenyl phosphite (TPP), CaCl₂, pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PAI-nanocomposite films 4a and 4b with 10% and 20% silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposite films were investigated by using UV–vis spectroscopy, thermogravimetric analysis (TGA) and water uptake measurements.     

Effect of poly(amid–imide)/Al2O3 hybrid with various ratios on the physicochemical properties of poly(vinyl alcohol) nanocomposites films

To study the effect of the various ratios of poly(amide–imide)/Al₂O₃ nanocomposites (PANC)s on the mechanical and thermal properties of nanocomposites films, poly(vinyl alcohol) (PVA)/PANCs based on various ratios of 2, 4, and 6 wt% were prepared and characterized. In the first step, the surface of alumina nanoparticles was treated with 15 wt% of biosafe diacid and consequently, about 10 wt% of these modified nanoparticles were loaded into the poly(amide–imide) matrix. Then, various contents of the obtained PANCs were incorporated into a PVA solution using a sonochemical treatment. The effects of PANC on the structure and morphology of PVA matrix were studied using powder X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and thermal gravimetric analysis (TGA). The results show that the tensile strength and decomposition temperature were improved as the portion of PANC into PVA matrix are increased from 2 to 6 wt%. Also, AFM pictures of the fracture surfaces of PVA/PANCs showed a significantly rougher surface than the neat PVA.     

Poly(vinyl alcohol) Chains Grafted onto the Surface of Copper Oxide Nanoparticles: Application in Synthesis and Characterization of Novel Optically Active and Thermally Stable Nanocomposites Based on Poly(amide-imide) Containing N-trimellitylimido-L-valine Linkage

Green polymer nanocomposites (NCs) show unique properties of combining the advantages of nanofillers and organic polymers. In this study, in order to control the dispersion of nanoparticles (NPs) in a polymer matrix, first, poly(vinyl alcohol) (PVA) as a green modifier was grafted on the surface of the CuO NPs to obtain CuO-PVA nanohybrid. Then poly(amide-imide) (PAI) was synthesized by the direct step growth polymerization of N-trimellitylimido-L-valine and 4,4′-methylenebis(3-chloro-2,6-diethylaniline) in ionic liquid medium. Finally, CuO-PVA hybrids were incorporated into the PAI matrix using ultrasonic technique for the preparation of PAI/CuO-PVA NCs. The obtained PAI/CuO-PVA NCs were characterized by different methods. The results of thermogravimetric analysis showed that thermal stability of the NCs was enhanced by incorporation of CuO-PVA nanohybrid compared to the pure PAI.     

Preparation and properties of poly(vinyl alcohol)–vermiculite nanocomposites

A vermiculite (VMT) dispersion in water was blended with aqueous poly(vinyl alcohol) (PVA). The properties of the PVA–VMT nanocomposites greatly depended on the preparation procedure because of the chemical reactions and physical interactions involved. The samples were prepared in two steps to investigate the properties of the PVA–VMT nanocomposites. The VMT was first pretreated and delaminated with hydrochloric acid. The delaminated VMT was then added to the PVA solution with various mixing times. The structure and properties of the films were investigated. From X‐ray diffraction and transmission electron microscopy, the VMT layers were found to be well dispersed individually in the PVA–VMT blends. The effect of the VMT content on the thermal behavior of the PVA–VMT blends was also studied with differential scanning calorimetry. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 749–755, 2003     

Application of CuO nanoparticles modified with vitamin B1 for the production of poly(vinyl alcohol)/CuO nanocomposite films with enhanced optical,thermal and mechanical properties

In this Investigation, the CuO nanoparticles (NPs) were treated by vitamin B₁ as a biomolecule modifier. The CuO NPs were used as an appropriate filler for fabrication of poly(vinyl alcohol) (PVA) nanocomposites (NCs). Then, NCs with various ratios (3, 5, and 7wt%) of modified CuO were fabricated under ultrasonic irradiation and their properties were compared with pure PVA. Several techniques were used for characterization of NCs. Field emission scanning electron microscopy and transmission electron microscopy analysis indicated that NPs have proper compatibility with the PVA matrix. Thermal gravimetric analysis results confirmed that NCs displayed higher thermal stability than neat PVA. Also, the addition of the NPs into the PVA matrix improved the optical and mechanical behaviors. Finally, the contact angle measurements verified that the hydrophilicity decreased for different ratios of modified NPs loaded in the polymer matrix. Copyright © 2017 John Wiley & Sons, Ltd.     

Modification of hydrophilic poly(vinyl alcohol) film via blending with hydrophobic poly(butyl acrylate-co-methyl methacrylate)

A series of poly(vinyl alcohol)/poly(butyl acrylate-co-methyl methacrylate) [PVA/P(BA-co-MMA)] blend films with different P(BA-co-MMA) content were prepared by the solution casting method. Surface morphologies of the PVA/P(BA-co-MMA) blend films were studied by scanning electron microscopy and atomic force microscopy. Thermal, mechanical, and chemical properties of PVA/P(BA-co-MMA) blend films were investigated by differential scanning calorimeter, thermogravimetric analysis, tensile tests, and surface contact angle tests. It was revealed that the introduction of P(BA-co-MMA) could affect the properties of the PVA films. The results also showed that, when P(BA-co-MMA) mole content is 3 %, the tensile strength and the surface contact angle of the polymer blend film are 20.4 MPa and 43.5°, respectively, suggesting that the polymer blend film holds both a better mechanical property and a better chemical property.     

Synthesize procedures, mechanical and thermal properties of thiazole bearing poly(amid-imide) composite thin films containing multiwalled carbon nanotubes

This research is aimed at characterizing the thermal, mechanical, and morphological properties of carbon nanotubes (CNTs) reinforced poly(amide-imide) (PAI) composites having thiazol and amino acid groups which were prepared by sonication-assisted solution compounding. To increase the compatibility between the PAI matrix and CNTs, carboxyl-functionalized multiwall CNTs (MWCNTs-COOH) were used in this study. The MWCNTs were dispersed homogeneously in the PAI matrix while the structure of the polymer and the MWCNTs structure are stable in the preparation process as revealed by transmission electron microscopy. MWCNT/PAI composite films have been prepared by casting a solution of precursor polymer containing MWCNTs into a thin film, and its tensile properties were examined. The thermal stability, Young’s modulus, and tensile strength of PAI were greatly improved by the incorporation of MWCNTs and their good dispersion. Composites were also characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermal gravimetric analysis.     

Bioartificial materials based on blends of dextran and poly(vinyl alcohol-co-acrylic acid)

Bioartificial polymeric materials based on blends of dextran and poly(vinyl alcohol-co-acrylic acid) P(VA-co-AA) were prepared in the form of films and characterised to evaluate the miscibility of the natural component with the synthetic one. The idea of this work was to compatibilise PVA and dextran by introducing carboxylic groups along the PVA chains.The copolymer was synthesised and characterised in our laboratories. The results evidenced that the copolymer had an appropriate molecular weight and the content of PAA in the copolymer was 45% (weight). Then, films with different composition ratios were prepared by solution casting and analysed by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), chemical imaging analysis and mechanical tests. The results obtained indicated that the introduction of carboxylic groups along the PVA chains had a positive effect on the miscibility degree of the synthetic component with the biological one.     

Surface modified graphene oxide/poly(vinyl alcohol) composite for enhanced hydrogen gas barrier film

A series of novel polyethyleneimine (PEI) modified graphene oxide (PEI-mGO) filled poly(vinyl alcohol) (PVA) nanocomposite (PEI-mGO/PVA) films were prepared by solution-casing for hydrogen gas barrier applications. Hydrophilic PEI was used to simultaneously reduce and modify graphene oxide sheets, thereby facilitating a homogeneous dispersion of PEI-mGO in the PVA matrix. The effects of PEI-mGO on the morphology and properties of the nanocomposite films were examined by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and field emission scanning electron microscopy. Analogous GO/PVA composites were also prepared and characterized for comparative purposes. The PEI-mGO/PVA nanocomposites showed higher thermal and mechanical stability as well as remarkable improvement in hydrogen gas barrier properties compared to the PVA film; specifically, the PEI-mGO/PVA film having 3.0 wt% of PEI-mGO content exhibited almost 95% decrease in GTR and permeability values compared to PVA film.     

Surface treatment of nano ZnO using 3,4,5,6-tetrabromo-N-(4-hydroxy-phenyl)-phthalamic acid as novel coupling agent for the preparation of poly(amide–imide)/ZnO nanocomposites

Technological developments during the last century have led to the use of materials that inhibit or resist the spread of fire, because modern world with the increase in electronic products presents a greater risk of fire dangers. In line with this goal, a novel modifier containing bromine elements with flame retardancy potential for the surface modification of ZnO nanoparticles was produced from the reaction between tetrabromophthalic anhydride and p-aminophenol. For the synthesis of nanocomposites (NCs), the modified ZnO was embedded in the poly(amide–imide) (PAI) matrix under ultrasonic conditions. Samples were characterized by Fourier transform infrared, thermogravimetric analysis (TGA), X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy and UV-visible (UV/Vis) techniques. TGA results indicated that the addition of modified ZnO into the PAI matrix increases in the thermal decomposition temperatures of the obtained NCs and that the UV/Vis absorbance of NCs was examined and displayed better UV-protection property than the pure PAI.     

Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SA) blend films

The structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SF) blend films were analyzed by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, x-ray diffractometry, and scanning (SEM) and transmission (TEM) electron microscopy. DSC curves of PVA/SF blend films showed a major endothermic peak at 220°C, along with a peak at 280°C. These endotherms were assigned to the thermal decomposition of the ordered PVA elements and to the thermal degradation of silk fibroin, respectively. The PVA/SF blends behaved in a manner intermediate to the pure components, as suggested by both contraction expansion and sample weight retention properties recorded by TMA and TGA measurements. The IR absorption spectra of the blends were identified as purely a composite of the absorption bands characteristic of both PVA and SF pure polymers. The X-ray diffraction patterns of PVA/SF blends showed overlapping spacing due to PVA and SF. A dispersed phase formed by spherical particles of 3–7 μm diameter was observed by SEM and TEM. All these findings suggest that PVA and SF are incompatible. © 1994 John Wiley & Sons, Inc.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

The effects of reactive organoclay on the thermal, mechanical, and microstructural properties of polymer/layered silicate nanocomposites based on chiral poly(amide-imide)s

Considering the importance of the nanocomposites, the present work focuses on some new hybrid materials prepared by introducing reactive organoclay (OC) into the chiral poly(amide-imide) (PAI) matrix. At first, Cloisite Na⁺ was modified with protonated l-isoleucine amino acid. Then, PAI containing phenylalanine was synthesized via solution polycondensation of chiral diacid chloride with 4,4′-diaminodiphenylsulfone and was characterized with Fourier transform infrared (FTIR) and ¹H NMR techniques. At last, PAI/OC nanocomposite films containing 2, 5, 10, and 15 % of OC were prepared via solution intercalation method. The effect of OC dispersion and the interaction between OC and polymer chains on the properties of nanocomposites were investigated using FTIR, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, tensile testing of thin films, and thermogravimetry analysis techniques. The thermal stability of hybrids such as the decomposition temperature and mass residue at 800 °C was improved. Mechanical data indicated improvement in the tensile strength of the nanocomposites with OC loading up to 10 wt%. The transparency of the hybrid films was investigated by means of UV–Vis spectra.     

Thermal properties of cotton fabric modified with poly (propylene imine) dendrimers

For the first time, thermal stability and flame retardant properties of cotton fabrics modified with poly (propylene imine) dendrimer (PPI-dendrimer) using cross linking agents have been reported. The PPI-dendrimers can be considered as novel nitrogen flame retardant agents, because they contain a large number of nitrogen-containing groups (amine end groups), which may release nitrogen gas or ammonia. In this paper, the effect of the PPI-dendrimers on thermal behavior of cotton fabric is investigated through thermogravimetric analysis, differential scanning calorimetry, flammability (in vertical configuration) and limiting oxygen index tests. Indeed, both thermal stability and flame retarancy of the modified fabrics have significantly enhanced. Furthermore, field emission scanning electron microscopy micrographs have been studied in order to evaluate morphology of the cotton samples. Crystallinity and physical properties including crease recovery angle, breaking strength, whiteness index and hygroscopicity of the samples have been also assessed.     

Ultrasonic treatment as recent and environmentally friendly route for the synthesis and characterization of polymer nanocomposite having PVA and biosafe BSA‐modified ZnO nanoparticles

The present study deals with the immobilization of ZnO nanoparticles (NPs) as nanofiller inside poly(vinyl alcohol) (PVA) by solution casting method which is a low‐cost, environmental‐friendly, and rapid method of sonochemistry. Firstly, the surface of ZnO NPs was treated by bovine serum albumin (BSA) in the phosphate‐buffered solution under ultrasonic cavitation. Three diverse polymeric nanocomposites (NCs) are formed by changing the percentage of ZnO@BSA NPs (3, 6, and 9 wt%) with same amount of PVA. The structure properties, morphology, and thermal stability of prepared NCs were determined through Fourier transform‐infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy (EDX) and optical UV‐Visible spectrum, transmission electron microscopy (TEM), and field emission scanning electron microscopy. The presence and the dispersal of the ZnO@BSA NPs in the PVA matrix were recognized by TEM. In the X‐ray diffraction analysis, the values of mean particle size using Debye‐Scherrer equation were estimated in the range 4 to 6 nm that is almost in agreement with TEM analysis. Increase of 14% in thermal stability and also increase of more than 2‐fold of the tensile strength of PVA/ZnO@BSA NC 9 wt% in respect to the pure PVA showed that the modified NPs well dispersed within PVA and attached to it.     

Stabilization of electrospun poly(vinyl alcohol) nanofibrous mats in aqueous solutions

<正>The stability ofpoly(vinyl alcohol)(PVA) nanofibrous mats in water media was improved by post-electrospinning treatments.Bifunctional glutaraldehyde(GA) in methanol was used as a crosslinking agent to stabilize PVA nanofiber,but fiber twinning was observed frequently,and the highly porous structure of PVA nanofibrous mats was destroyed when the crosslinked fiber was soaked in water.To overcome this shortcoming,chitosan(CS) was introduced into the PVA spinning solution to prepare PVA/CS composite nanofibers.Their treatment in GA/methanol solution could retain the fiber morphology of PVA/CS nanofibers and porous structure of PVA/CS nanofibrous mats even if they were soaked in aqueous solutions for 1 month.Scanning electron microscopy(SEM),X-ray diffraction(XRD),thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC) were applied to characterize the physicochemical structure and thermal properties of PVA nanofibers.It was found that the water resistance of PVA nanofibrous mats was enhanced because of the improvement of the degree of crosslinking and crystallinity in the electrospun PVA fibers after soaking in GA/methanol solution.     

Preparation and characterization of poly(vinyl alcohol)/organo-modified cloisite Na+ with chiral L-leucine amino acid/TiO2 nanocomposites

Poly(vinyl alcohol)/organo-clay/TiO₂ nanocamposites films were prepared with 10 wt % of organo-nanoclay and various amount of TiO₂ nanoparticles. Cloisite Na⁺ has been modified via cation exchange reaction using ammonium salt of natural L-leucine amino acid as a cationic surfactant. After that poly(vinyl alcohol)/organo-nanoclay/TiO₂ nanocomposites were synthesized by dispersion of TiO₂ on the surfaces of organo-nanoclay in poly(vinyl alcohol) matrix by using ultrasonic energy. Three nanocomposites with different loading of TiO₂ were prepared and characterized by X-ray diffraction, fourier transform infrared spectroscopy, field emission type scanning electron microscope, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis and ultraviolet-visible transmission spectra. The results showed that the organo-nanoclay and TiO₂ were dispersed homogeneously in poly(vinyl alcohol) matrix and also showed improvement in their thermal properties compared with the pure poly(vinyl alcohol).     

Thermal and photochemical stability of poly(vinyl alcohol)/modified lignin blends

A kraft lignin derivative (KLD) obtained by reaction with p-aminobenzoic acid/phthalic anhydride was blended with poly(vinyl alcohol) (PVA) by solution casting from DMSO. PVA and PVA/KLD films were exposed to ultraviolet radiation (24, 48, and 96 h) and analyzed by thermogravimetry (TG), differential scanning calorimetry (DSC), infrared spectroscopy (FTIR), hydrogen nuclear magnetic resonance (¹H NMR) spectroscopy, and scanning electron microscopy (SEM). PVA films show a loss of thermal stability due to irradiation. PVA/KLD reveals greater thermal stability than PVA and an increase in thermal stability after irradiation. These results suggest that the incorporation of KLD into PVA provides a gain in thermal and photochemical stability. FTIR, ¹H NMR, DSC, and TG results obtained for the blends suggest that intermolecular interactions between PVA and KLD chains are present. SEM micrographs revealed blend miscibility for a KLD blend content of up to 15 wt%, as observed at magnification of 1000 times.