High-resolution Orbitrap mass spectrometry for the analysis of carotenoids in tomato fruit: validation and comparative evaluation towards UV–VIS and tandem mass spectrometry

In this study, a generic extraction protocol and full-scan high-resolution Orbitrap-mass spectrometry (MS) detection method were developed, enabling the metabolomic screening for carotenoids in tomato fruit tissue. To this end, the carotenoids lutein, zeaxanthin, α-carotene, β-carotene, and lycopene (representing both xanthofylls and carotenes) were considered. The extraction procedure was optimized by means of a D-optimal design and consisted of a liquid–liquid extraction with methanol/tert-butyl methyl ether (1:1, v/v). The considered compounds were detected by a single-stage Exactive^TM mass spectrometer, operating at a mass resolution of 100,000 full width at half maximum. The validation study demonstrated excellent performance in terms of linearity (R ²?>?0.99), repeatability (CV?≤?10.6 %), within-laboratory reproducibility (CV?≤?12.2 %), and mean corrected recovery (ranging from 85 to 106 %). Additionally, a comparative evaluation towards well-established detection techniques, i.e., tandem mass spectrometry (MS/MS) and ultraviolet-visible spectroscopy (UV–VIS) photodiode array, indicated superior performance of high-resolution Orbitrap-MS with regard to specificity/selectivity and sensitivity (with limits of detection ranging from 1.0 to 3.8 pg μL^?1). As a result, it may be concluded that high-resolution Orbitrap-MS is a suited alternative for UV–VIS or MS/MS in analyzing carotenoids and may offer significant value in carotenoid research because of the metabolomic screening possibilities.

A Phenylurea Cytokinin,CPPU, Elevated Reducing Sugar and Correlated to Andrographolide Contents in Leaves of <Emphasis Type="Italic">Andrographis paniculata</Emphasis> (Burm. F.) Wall. Ex Nees

Cytokinins are phytohormones that play multiple roles to control plant growth and development. In this study, leaf biomass and the production of andrographolide compounds in a medicinal plant Andrographis paniculata were significantly increased after exogenously treating with the synthetic cytokinin cytokinin-1-(2-chloro-4-pyridyl)-3-phenylurea (CPPU) at 0 (water), 5, or 10 mg L^?1 and observed the results for 24 h, 48 h, and 7 days of treatment. It was found that CPPU could significantly enhance new axillary bud formation and further promote branching 4.6–5.6-fold higher, resulting in higher fresh weight (FW) and dry weight (DW) than the control. Application of CPPU at 5 mg L^?1 significantly promoted the highest contents of total reducing sugar at 2.5-fold in leaves and at 1.5-fold in roots. Although treatments of CPPU significantly affected the increasing contents of chlorophyll and carotenoid (1.2–1.6-fold), CPPU at 10 mg L^?1 slightly caused leaf stress and chlorophyll reduction. Interestingly, 5 mg L^?1 CPPU could enhance andrographolide content, an active anti-infectious compound in Andrographis paniculata (2.2-fold higher than the control) that reached the highest content at 24 h after treatment. This study suggested that CPPU should be suitable for field application to promote leaf yields and induce the production of useful pharmaceutical compounds in Andrographis paniculata.     

Effect of Elicitors and Precursors on Azadirachtin Production in Hairy Root Culture of Azadirachta indica

The present study involved strategies for enhancement in in vitro azadirachtin (commercially used biopesticide) production by hairy root cultivation of Azadirachta indica. Improvement in the azadirachtin production via triggering its biosynthetic pathway in plant cells was carried out by the exogenous addition of precursors and elicitors in the growth medium. Among the different abiotic stress inducers (Ag⁺, Hg⁺², Co⁺², Cu⁺²) and signal molecules (methyl jasmonate and salicylic acid) tested, salicylic acid at 15 mg l^?1 of concentration was found to enhance the azadirachtin yield in the hairy roots to the maximum (up to 4.95 mg g^?1). Similarly, among the different biotic elicitors tested (filter-sterilized fungal culture filtrates of Phoma herbarium, Alternaria alternata, Myrothecium sp., Fusarium solani, Curvularia lunata, and Sclerotium rolfsii; yeast extract; and yeast extract carbohydrate fraction), addition of filter-sterilized fungal culture filtrate of C. lunata (1 %?v/v) resulted in maximum azadirachtin yield enhancement in hairy root biomass (up to 7.1 mg g^?1) with respect to the control (3.3 mg g^?1). Among all the biosynthetic precursors studied (sodium acetate, cholesterol, squalene, isopentynyl pyrophosphate, mavalonic acid lactone, and geranyl pyrophosphate), the overall azadirachtin production (70.42 mg l^?1 in 25 days) was found to be the highest with cholesterol (50 mg l^?1) addition as an indirect precursor in the medium.     

Growth Parameters,Photosynthetic Performance,and Biochemical Characterization of Newly Isolated Green Microalgae in Response to Culture Condition Variations

This work aimed to characterize two native microalgal strains newly isolated from South Mediterranean areas and identified as Chlorella sorokiniana ES3 and Neochloris sp. AM2. The growth properties and biochemical composition of these microalgae were evaluated in different culture media (Algal, BG-11, f/2, and Conway). Among the tested media, nitrate- and phosphate-rich Algal medium provided the maximum biomass productivities (85.5 and 111.5 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively), while the nitrate- and phosphate-deficient f/2 medium resulted in the highest lipid productivities (24.1 and 35.8 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively). The physiological state of both microalgae was investigated under different light and temperature levels using the pulse amplitude-modulated fluorometry. The better photosynthetic efficiency of C. sorokiniana was obtained at 23 °C with a light saturation of 156 μE m^?2 s^?1, while that of Neochloris sp. was achieved at 15 °C with a light saturation of 151 μE m^?2 s^?1. The analysis of fatty acid profile and biodiesel parameters revealed that C. sorokiniana, cultivated in Algal and f/2 media, can be considered as a suitable candidate for high-quality biodiesel production.     

Enhanced bacoside production in shoot cultures of Bacopa monnieri under the influence of abiotic elicitors

The effect of different abiotic elicitors [jasmonic acid, copper sulphate (CuSO₄) and salicyclic acid] at varying concentrations on the stimulation of biomass and bacoside production in in vitro Bacopa monnieri shoot culture was studied. A systematic study conducted over a period of 35 days indicated that the maximum bacoside production (6.74 mg g^? 1 dry weight (DW)) was obtained after a lag of 7 days and thereafter, the content decreased gradually to again increase at 28 days (5.91 mg g^? 1 DW). Therefore, elicitation experiments were carried out over a period of 3, 6 and 9 days. The shoot cultures treated with 45 mg L^? 1 of CuSO₄ exhibited the highest bacoside content of 8.73 mg g^? 1 DW (～1.42-fold higher) than in control cultures (6.14 mg g^? 1 DW). This study indicates the effectiveness of abiotic elicitation on bacoside production in in vitro shoot cultures of this medicinally important herb known for its memory-enhancing properties.     

Pilot-Scale Culture of Hypericum Perforatum L. Adventitious Roots in Airlift Bioreactors for the Production of Bioactive Compounds

Hypericum perforatum L. (St. John’s Wort) is an important medicinal plant which is widely used in the treatment for depression and irritable bowel syndrome. It is also used as a dietary supplement. Major bioactive phytochemicals of H. perforatum are phenolics and flavonoids. Quality of these phytochemicals is dramatically influenced by environmental and biological factors in the field grown plants. As an alternative, we have developed adventitious root cultures in large-scale bioreactors for the production of useful phytochemicals. Adventitious roots of H. perforatum were cultured in 500 l pilot-scale airlift bioreactors using half-strength Murashige and Skoog medium with an ammonium and nitrate ratio of 5:25 mM and supplemented with 1.0 mg l^?1 indole butyric acid, 0.1 mg l^?1 kinetin, and 3 % sucrose for the production of bioactive phenolics and flavonoids. Then 4.6 and 6.3 kg dry biomass were realized in the 500 l each of drum-type and balloon-type bioreactors, respectively. Accumulation of 66.9 mg g^?1 DW of total phenolics, 48.6 mg g^?1 DW of total flavonoids, 1.3 mg g^?1 DW of chlorogenic acid, 0.01 mg g^?1 DW of hyperin, 0.04 mg g^?1 DW of hypericin, and 0.01 mg g^?1 DW of quercetin could be achieved with adventitious roots cultured in 500 l balloon-type airlift bioreactors. Our findings demonstrate the possibilities of using H. perforatum adventitious root cultures for the production of useful phytochemicals to meet the demand of pharmaceutical and food industry.     

Screening of <Emphasis Type="Italic">Isochrysis</Emphasis> Strains and Utilization of a Two-Stage Outdoor Cultivation Strategy for Algal Biomass and Lipid Production

Isochrysis is a genus of marine algae without cell wall and capable of accumulating lipids. In this study, the lipid production potential of Isochrysis was assessed by comparing 15 Isochrysis strains with respect to their growth rate, lipid production, and fatty acid profiles. Three best strains were selected (lipid productivity, 103.0~121.7 mg L^?1 day^?1) and their lipid-producing capacities were further examined under different controlled parameters, e.g., growth phase, medium nutrient, and light intensity in laboratory cultures. Furthermore, the three Isochrysis strains were monitored in outdoor panel photobioreactors with various initial cell densities and optical paths, and the strain CS177 demonstrated the superior potential for outdoor cultivation. A two-stage semi-continuous strategy for CS177 was subsequently developed, where high productivities of biomass (1.1 g L^?1 day^?1) and lipid (0.35 g L^?1 day^?1) were achieved. This is a comprehensive study to evaluate the lipid-producing capability of Isochrysis strains under both indoor and outdoor conditions. Results of the present work lay a solid foundation for the physiological and biochemical responses of Isochrysis to various conditions, shedding light on the future utilization of this cell wall-lacking marine alga for biofuel production.     

Uncertainty Analysis of Chlormequat Residue in Fruits by LC�CMS�CMS

A method for determination of chlormequat (CCC) residue in fruits by liquid chromatography?Ctandem mass spectrometry (LC?CMS?CMS) was developed. Residue of CCC was extracted from samples with methanol?Cwater (v/v, 1:1) containing 1.0% acetic acid, cleaned up by strong cationic exchange (SCX) cartridge, and then determined by LC?CMS?CMS. The method showed good linearity over the concentration range 0.002?C5.0 mg kg^?1 with correlation coefficient above 0.997. The limit of detection (LOD) and limit of quantitation (LOQ) for CCC were 5 × 10^?4 mg kg^?1 (S/N = 3) and 0.002 mg kg^?1 (S/N = 10), respectively. Recoveries for CCC at three spiked levels (0.025, 0.050, and 0.20 mg kg^?1) were in the range 80?C102%. Estimation of measurement uncertainty was calculated for CCC at the level of 0.025 mg kg^?1 in fruits. The results demonstrated that the uncertainty of recovery was the main contribution to the combined standard uncertainty. The relative combined standard uncertainties associated with the method ranged from 11 to 13%, depending on the sample matrices.     

Application of Physicochemical Treatment Allows Reutilization of <Emphasis Type="Italic">Arthrospira platensis</Emphasis> Exhausted Medium

Since cultivations of Arthrospira platensis have a high water demand, it is necessary to develop treatment methods for reusing the exhausted medium that may prevent environmental problems and obtaining useful biomass. The exhausted Schlösser medium obtained from A. platensis batch cultivation in bench-scale mini-tanks was treated by varying concentrations of different coagulants, ferric chloride (6, 10, and 14 mg L^?1) or ferric sulfate (15, 25, and 35 mg L^?1) and powdered activated carbon (PAC, 30 and 50 mg L^?1). Such treated effluent was restored with NaNO₃ and reused in new cultivations of A. platensis performed in Erlenmeyer flasks. Reusing media through the cultivation of A. platensis showed satisfactory results, particularly in the medium treated with ferric chloride and PAC. The maximum cell concentration obtained in the flasks was 1093 mg L^?1, which corresponded to the medium treated with ferric chloride (6 mg L^?1) and PAC (30 mg L^?1). This cellular growth was higher than in the medium treated with ferric sulfate and PAC, in which values of maximum cell concentration did not exceed 796 mg L^?1. The cultures in the media after treatment did not modify the biomass composition. Thus, combined coagulation/adsorption processes, commonly used in water treatment processes, can be efficient and viable for treating exhausted medium of A. platensis, allowing the production of such biomass with the reduction of production cost and saving water.     

Gene Cloning, Expression, and Characterization of a Thermostable Xylanase from Nesterenkonia xinjiangensis CCTCC AA001025

An endo-β-1,4-xylanase-encoding gene, xyn11NX, was cloned from Nesterenkonia xinjiangensis CCTCC AA001025 and expressed in Escherichia coli. The gene encoded a 192-amino acid polypeptide and a putative 50-amino acid signal peptide. The deduced amino acid sequence exhibited a high degree of similarity with the xylanases from Streptomyces thermocyaneoviolaceus (68%) and Thermobifida fusca (66%) belonging to glycoside hydrolase family 11. After purification to homogeneity, the recombinant Xyn11NX exhibited optimal activity at pH 7.0 and 55 °C and remained stable at weakly acidic to alkaline pH (pH 5.0–11.0). The enzyme was thermostable, retaining more than 80% of the initial activity after incubation at 60 °C for 1 h and more than 40% of the activity at 90 °C for 15 min. The K _m and V _max values for oat spelt xylan and birchwood xylan were 16.08 mg ml^?1 and 45.66 μmol min^?1 mg^?1 and 9.22 mg ml^?1 and 16.05 μmol min^?1 mg^?1, respectively. The predominant hydrolysis products were xylobiose and xylotriose when using oat spelt xylan or birchwood xylan as substrate.     

Optimization of Adventitious Root Culture for Production of Biomass and Secondary Metabolites in Prunella vulgaris L.

Adventitious root cultures of Prunella vulgaris L. were established in shaking flask system for the production of biomass and secondary metabolites. Adventitious root cultures were induced from callus cultures obtained from leaf explants on solid Murashige and Skoog (MS) medium containing combination of 6-benzyladenine (BA; 1.0 mg l^?1) and naphthalene acetic acid (NAA; 1.5 mg l^?1). Thereafter, 0.49 g inoculum was transferred to liquid MS medium supplemented with different concentrations of NAA (0.5–2.0 mg l^?1). Growth kinetics of adventitious roots was recorded with an interval of 7 days for 49 days period. Highest biomass accumulation (2.13 g/l) was observed in liquid medium containing 1.0 mg l^?1 NAA after 21 days of inoculation. However, other concentrations of NAA also showed similar accumulation pattern but the biomass gradually decreases after 49 days of inoculation. Adventitious roots were collected and dried for investigation of total phenolics (TP), total flavonoids (TF), and antioxidant activities. Higher TPC (0.995 GAE mg/g-DRB) and TFC (6.615 RE mg/g-DRB) were observed in 0.5 mg l^?1 NAA treated cultures. In contrast, higher antioxidant activity (83.53 %) was observed 1.5 mg l^?1 NAA treated cultures. These results are helpful in up scaling of root cultures into bioreactor for secondary metabolites production.     

Effect of Various Colors of Light-Emitting Diodes (LEDs) on the Biomass Composition of Arthrospira platensis Cultivated in Semi-continuous Mode

In the present study, semi-continuous cultivation of Arthrospira platensis using various colors of light-emitting diodes (LEDs) as artificial lighting was performed in order to study their effects on the biomass composition of A. platensis. The lowest biomass productivity was obtained with blue LED (4.68 mg l^?1 day^?1), while the highest was obtained with pink and red LEDs (30.89 and 30.69 mg l^?1 day^?1, respectively). All biomass compound contents were affected by the different colors studied, except that of total carotenoids. The lowest phycocyanin content was observed in pink LED (8.2 %) while the maximum in blue LED (17.6?±?2.4 %). Chlorophyll content was lowest in red LED (1.04 %) and highest in blue LED (1.42 %). The highest protein content was obtained with white and green LEDs (50.1 and 49.8 %, respectively), while the lowest was obtained with blue LED (42.1 %). Carbohydrate content was contrarily affected as that of proteins. The highest carbohydrate content was obtained in blue LED (11.3 %) and the lowest under white and pink LEDs (8.8 and 8.8 %, respectively). Lipid content seems to follow the same trend as that of carbohydrates; the highest lipid content was obtained in blue LED (6.0 %), and the lowest was obtained under pink LED (3.8 %).     

Optimised isolation of polysaccharides from Lentinula edodes strain NCBI JX915793 using response surface methodology and their antibacterial activities

Mycelial growth in a defined medium by submerged fermentation is a rapid and alternative method for obtaining fungal biomass of consistent quality. Biomass, exopolysaccharides (EPS) and intracellular polysaccharides (IPS) production were optimised by response surface methodology in Lentinula edodes strain LeS (NCBI JX915793). The optimised conditions were pH 5.0, temperature 26°C, incubation period of 25 days and agitation rate of 52 r/min for L. edodes strain LeS. Under the calculated optimal culture conditions, biomass production (5.88 mg mL^? 1), EPS production (0.40 mg mL^? 1) and IPS production (12.45 mg g^? 1) were in agreement with the predicted values for biomass (5.93 mg mL^? 1), EPS (0.55 mg mL^? 1) and IPS production (12.64 mg g^? 1). Crude lentinan exhibited highest antibacterial effects followed by alcoholic, crude and aqueous extracts. The results obtained may be useful for highly effective yield of biomass and bioactive metabolites.     

Analysis of bioaccessible concentration of trace elements in plant based edible materials by INAA and ICPMS methods

The total metal concentration and bioaccessible concentration of Cr, Mn, Fe, Cu, Zn, Se in Momordica charantia, Asparagus racemosus, Terminalia arjuna and Syzyzium cumini were measured by instrumental neutron activation analysis and by inductively coupled plasma mass spectrometry analysis (ICP-MS). The bioaccessible concentrations were determined in the gastrointestinal digest obtained after treating dried powdered samples sequentially in gastric and intestinal fluid of porcine origin at physiological conditions. The bioaccessible concentration of Fe was in the range of 58–67 mg kg^?1, Mn was 10.2–14.6 mg kg^?1, Cu was 3.7–4.8 mg kg^?1 and Zn was 10.6–18.4 mg kg^?1, were within the safety limits set for vegetable food stuff set by Joint FAO/WHO. The bioaccessibility of Zn, an essential element, was high (40–50 %) in M. charantia and in S. cumini. In addition, the total metal contents and bioaccessible concentration of Ni, Se, Cd and Pb in these samples were measured by ICP-MS. The total Cd content in S. cumini (2.6 ± 0.2 mg kg^?1) and its bioaccessible concentration (0.6 mg kg^?1) were strikingly high as compared to the other samples. Though total Hg contents were determined by ICP-MS, but their bioaccessible concentrations were below the detection limit (0.036 mg kg^?1).     

A Rapid Method for the Analysis of Ten Compounds in Psoralea corylifolia L. by UPLC

The objective of this study was to develop a simple, efficient and reliable method for routine quantitative analysis for Psoralea corylifolia L. An ultra performance liquid chromatography with DAD detector system was employed for simultaneous quantification of ten compounds. The chromatographic analysis was performed by UPLC with C₁₈ column and gradient elution of 0.05% formic acid aqueous solution and acetonitrile in 16 min. All calibration curves were linear (R ² ≥ 0.9990) over the tested ranges. The LOD and LOQ were lower to 13.07 and 39.22 ng mL^?1 with 2 μL of injection volume, respectively. The intra- and inter-day precisions as determined from sample solutions were below 4.1 and 4.2%. The average recoveries were ranged from 94.2 to 108.8% with RSDs ≤ 4.6%. This validated method was applied for the analysis of ten analytes in P. corylifolia L. from different origins. The variation of the content of ten compounds was remarkable among the tested samples: psoralenoside increased from 7.42 to 17.04 mg g^?1, isopsoralenoside from 6.05 to 14.34 mg g^?1, psoralen from 2.37 to 3.90 mg g^?1, isopsoralen from 2.53 to 3.65 mg g^?1, neobavaisoflavone from 1.59 to 2.96 mg g^?1, bavachin from 1.02 to 2.35 mg g^?1, psoralidin from 0.45 to 1.91 mg g^?1, isobavachalcone from 1.33 to 4.71 mg g^?1, corylifol A from 1.02 to 2.40 mg g^?1 and bakuchiol from 28.10 to 63.89 mg g^?1.     

Purification and Characterisation of a β-1,4-Xylanase from Remersonia thermophila CBS 540.69 and Its Application in Bread Making

This work reports the first investigation of Remersonia thermophila hemicellulosic hydrolytic enzyme production, with subsequent purification of an extracellular endo-β-1,4-xylanase (RtXyl) and its application in bread making. The research describes RtXyl purification from sorghum-induced submerged liquid cultures of this moderately thermophilic, aerobic, ascomycete fungus. The purified enzyme is a single subunit protein with a molecular mass of 42 kDa and exhibits glycosyl hydrolase family-10-like activity over a broad pH and temperature range. Optimal activity was measured at pH 6.0 and 65 °C respectively, which is suitable for bread making applications. Substrate specificity studies revealed that RtXyl is purely xylanolytic with no side-activities against other plant polysaccharides. The RtXyl catalytic efficiency (K _cat/K _m) was highest with oats spelt xylan (810.90 mg mL^?1 s^?1), wheat arabinoxylan (809.52 mg mL^?1 s^?1) and beechwood xylan (417.40 mg mL^?1 s^?1) with less efficiency towards insoluble oats spelt xylan (236.40 mg mL^?1 s^?1). Hydrolysis products analysed by thin layer chromatography yielded a range of xylosaccharides, predominantly xylotriose and xylobiose. RtXyl application in a basic wheat bread recipe at low dosages (0.297 XU/g) showed its suitability to increase loaf volume by 8.0 % compared with the control bread. RtXyl increased loaf softness by 19.6 % while reducing bread staling by 20.4 % up to 4 days of storage.     

Optimization of clean extraction methods to isolate carotenoids from the microalga Neochloris oleoabundans and subsequent chemical characterization using liquid chromatography tandem mass spectrometry

A novel experimental design was used to optimize the extraction of carotenoids from Neochloris oleoabundans using pressurized liquid extraction with food-grade solvents such as ethanol and limonene. Experimental factors, including the extraction temperature and the solvent composition, were optimized using a three-level factorial design. The response variables extraction yield and total amount of carotenoids were assessed. The statistical analysis of the results provided mathematical models to predict the behavior of the responses as a function of the factors involved in the process. The optimum conditions predicted by the model developed in this study were 112 °C as the extraction temperature and 100 % ethanol as the extraction solvent. Chemical characterization of the extracts obtained was performed by means of high-performance liquid chromatography–tandem mass spectrometry. The results obtained demonstrated that, under certain growth conditions (photoautotrophically cultured in a medium supplemented with 0.3 g?L^?1 KNO₃), N. oleoabundans accumulated significant total amounts of the carotenoids (from 57.4 to 120.2 mg carotenoids per gram of extract depending on the extraction conditions), mainly lutein, cantaxanthin, zeaxanthin, and astaxanthin monoesters and diesters.     

In Vitro Propagation and Assessment of the Genetic Fidelity of Musa acuminata (AAA) cv. Vaibalhla Derived from Immature Male Flowers

An efficient in vitro propagation method has been developed for the first time for Musa acuminata (AAA) cv. Vaibalhla, an economically important banana cultivar of Mizoram, India. Immature male flowers were used as explants. Murashige and Skoog’s (MS) medium supplemented with plant growth regulators (PGRs) were used for the regeneration process. Out of different PGR combinations, MS medium supplemented with 2 mg L^?1 6-benzylaminopurine (BAP) + 0.5 mg L^?1 α-naphthalene acetic acid (NAA) was optimal for production of white bud-like structures (WBLS). On this medium, explants produced the highest number of buds per explant (4.30). The highest percentage (77.77) and number (3.51) of shoot formation from each explants was observed in MS medium supplemented with 2 mg L^?1 kinetin + 0.5 mg L^?1 NAA. While MS medium supplemented with a combination of 2 mg L^?1 BAP + 0.5 mg L^?1 NAA showed the maximum shoot length (14.44 cm). Rooting efficiency of the shoots was highest in the MS basal medium without any PGRs. The plantlets were hardened successfully in the greenhouse with 96 % survival rate. Random amplified polymorphic DNA (RAPD) and inter-simple sequence repeat (ISSR) markers were employed to assess the genetic stability of in vitro regenerated plantlets of M. acuminata (AAA) cv. Vaibalhla. Eight RAPD and 8 ISSR primers were successfully used for the analysis from the 40 RAPD and 30 ISSR primers screened initially. The amplified products were monomorphic across all the regenerated plants and were similar to the mother plant. The present standardised protocol will find application in mass production, conservation and genetic transformation studies of this commercially important banana.     

LC Method for Quantification of Lutein in Rat Plasma: Validation, and Application to a Pharmacokinetic Study

A reversed-phase LC method has been developed for quantitative analysis of lutein in rat plasma and applied to a study of the pharmacokinetics of lutein in rats. From a variety of compounds and solvents tested, astaxanthin was selected as the internal standard. n-Hexane was found to be the best solvent for extracting lutein from plasma. LC analysis of the extracts was performed on a C₁₈ column equipped with a guard pre-column. Linearity was good (r > 0.99) over the range 10–100 ng mL^?1. Recovery from plasma was 82.7–92.9% the intra-day and inter-day precision were always better than 3%. The limits of detection (LOD) and quantification (LOQ) were 2.5 and 8.3 ng mL^?1, respectively. The LC method was used to quantify lutein and zeaxanthin in rat plasma in a 36-h pharmacokinetic study in which experimental rats received a single oral dose of lutein (20 mg kg^?1). The results are presented.     

Fast Determination of Phenolic Compounds in Brazilian Wines from Vale do São Francisco Region by CE

Six phenolic compounds were separated and determined by capillary zone electrophoresis in red wine from Brazil’s region Vale do São Francisco with total analysis time of 12 min. The limit of detections varied from 1.59 to 2.24 mg L^?1. The relative standard deviations (for n = 6) varied from 0.28 to 3.50 %. The red wine samples analyzed were bought in the local market and the phenolic compound recoveries were in the range of 98–101 %. The concentrations of gallic acid in the samples of wines varied from 16.0 to 42.0 mg L^?1, caffeic acid (3.16–5.18 mg L^?1), syringic acid (5.73–13.0 mg L^?1), kaempferol (2.32–4.33 mg L^?1), quercetin (1.68–4.03 mg L^?1), myricetin (7.52–25.1 mg L^?1). The concentrations found agree with data reported in the literature.