Linear stability of triple-diffusive convection in micropolar ferromagnetic fluid saturating porous medium

The triple-diffusive convection in a micropolar ferromagnetic fluid layer heated and soluted from below is considered in the presence of a transverse uniform magnetic field. An exact solution is obtained for a flat fluid layer contained between two free boundaries. A linear stability analysis and a normal mode analysis method are carried out to study the onset convection. For stationary convection, various parameters such as the medium permeability, the solute gradients, the non-buoyancy magnetization, and the micropolar parameters (i.e., the coupling parameter, the spin diffusion parameter, and the micropolar heat conduction parameter) are analyzed. The critical magnetic thermal Rayleigh number for the onset of instability is determined numerically for a sufficiently large value of the buoyancy magnetization parameter M ₁. The principle of exchange of stabilities is found to be true for the micropolar fluid heated from below in the absence of the micropolar viscous effect, the microinertia, and the solute gradients. The micropolar viscous effect, the microinertia, and the solute gradient introduce oscillatory modes, which are non-existent in their absence. Sufficient conditions for the non-existence of overstability are also obtained.     

Chaotic behavior in the Helleman mapping

In this paper, we establish the analytical conditions for the Helleman mapping in which the Smale horseshoe appears. Then we use it to educe the chaotic criterion of Henon maps. Projects supported by the Scientific Fund of the Chinese Academy of Sciences. The author would like to thank Professor Zhang Jin-Yan.     

Stability of Thermosolutal Natural Convection in Superposed Fluid and Porous Layers

This article deals with the onset of thermosolutal natural convection in horizontal superposed fluid and porous layers. A linear stability analysis is performed using the one-domain approach. As in the thermal convection case, the results show a bimodal nature of the marginal stability curves where each mode corresponds to a different convective instability. At small wave numbers, the convective flow occurs in the whole cavity (“porous mode”) while perturbations of large wave numbers lead to a convective flow mainly confined in the fluid layer (“fluid mode”). Furthermore, it is shown that the onset of thermosolutal natural convection is characterized by a multi-cellular flow in the fluid region for negative thermal Rayleigh numbers. For positive thermal Rayleigh numbers, the convective flow takes place both in the fluid and porous regions. The influence of the depth ratio and thermal diffusivity ratio is also investigated for a wide range of the thermal Rayleigh numbers.     

Centrifugal Acceleration Induced Convection in a Magnetic Fluid Saturated Anisotropic Rotating Porous Medium

A theoretical investigation is made to study the influence of magnetic field on the onset of convection induced by centrifugal acceleration in a magnetic fluid filled porous medium. The layer is assumed to exhibit anisotropy in mechanical as well as thermal sense. Numerical solutions are obtained using the Galerkin method for the eigenvalue problem arising from the linear stability theory. It is found that the magnetic field has a destabilizing effect and can be suitably adjusted depending on the anisotropy parameters to enhance convection. The effect of anisotropies of magnetic fluid filled porous media is shown to be qualitatively different from that of ordinary fluid filled porous media. This phenomenon may be helpful to increase the efficiency of suitable heat transfer devices.     

The Effect of Double Dispersion on Natural Convection Heat and Mass Transfer in a Non-Newtonian Fluid Saturated Non-Darcy Porous Medium

The effect of power law index parameter of the non-Newtonian fluid on free convection heat and mass transfer from a vertical wall is analyzed by considering double dispersion in a non-Darcy porous medium with constant wall temperature and concentration conditions. The Ostwald–de Waele power law model is used to characterize the non-Newtonian fluid behavior. In this case a similarity solution is possible. The variation of heat and mass transfer coefficients with the governing parameters such as power law index, thermal and solutal dispersion parameters, inertia parameter, buoyancy ratio, and the Lewis number is discussed for a wide range of values of these parameters.     

Finite Element Analysis of Convection Flow Through a Porous Medium in a Horizontal Channel

We analyse the convection flow of a viscous fluid through a horizontal channel enclosing a fully saturated porous medium. The Galerkin finite element analysis is used to discuss the flow and heat transfer through the porous medium using serendipity elements. The velocity, the temperature distributions and the rate of heat transfer are analysed for variations in the governing parameters. The profiles at different vertical levels are asymmetric curves, exhibiting reversal flow everywhere except on the midplane. In a given porous medium, for fixed G or N, the temperature in the fluid region at any position in fluids with a higher Prandtl number, is much higher than in fluids with a lower Prandtl number. Likewise, other parameters being fixed, lesser the permeability of the medium, lower the temperature in the flow field. Nu reduces across the flow at all axial positions, while it enhances along the axial direction of the channel. Nu reduces with decrease in the Darcy parameter D, and thus lesser the permeability of the medium, lesser the rate of heat transfer across the boundary at any axial position of the channel.     

The Stress–Strain State of an Elastic Ferromagnetic Medium with an Ellipsoidal Inclusion in a Homogeneous Magnetic Field

A stress–strain problem is solved for an infinite elastic magnetically soft medium with an ellipsoidal inclusion in an external magnetic field. The main characteristics of the stress–strain state and induced magnetic fields in the medium and the inclusion are determined and their distribution over the surface of the inclusion is analyzed     

Free Convection in Spherical Annular Sectors Filled with a Porous Medium

Calculated free convection flows and heat transfer are presented for concentric spherical annular sectors, filled with a porous medium. Two isothermal walls and an adiabatic radial wall at the sector angle define the sectors. The governing equations (in the stream function and temperature formulation) are solved numerically using ADI (alternative direction implicit) finite-difference method. Over the range of geometric parameters examined, the obtained results for spherical annuli and low Rayleigh number Ra. As Ra increases, multicellular flows develop for small values of the aspect ratio parameter . In addition, analytical solutions of the governing equations were obtained for small values of Ra (1) and it was shown that these solutions agree well with those obtained numerically. Significant differences in the local heat transfer rates on the inner and outer walls of the spherical annuli were observed from these solutions.     

Mixed Convection Effect on Melting from a Vertical Plate in a Porous Medium

In the present work, the effect of mixed convection about vertical surfaces on the phenomenon of melting process in a fluid-saturated porous medium is analyzed on the basis of boundary layer approximations. Similarity solutions are obtained for aiding external flow. The final similarity equations are integrated numerically by use of the fourth-order Runge–Kutta method. Results are reported for the flow and thermal fields in the melt region. The melting phenomenon decreases the local Nusselt number at the solid–liquid interface.     

Radiative Effect on Natural Convection Flows in Porous Media

A regular two-parameter perturbation analysis based upon the boundary layer approximation is presented here to study the radiative effects of both first- and second-order resistances due to a solid matrix on the natural convection flows in porous media. Four different flows have been studied, those adjacent to an isothermal surface, a uniform heat flux surface, a plane plume and the flow generated from a horizontal line energy source on a vertical adiabatic surface. The first-order perturbation quantities are presented for all these flows. Numerical results for the four conditions with various radiation parameters are tabulated.     

Free Convection from a Vertical Plate in a Porous Medium Subjected to a Porous Medium Subjected to a Sudden Change in Surface Heat Flux

An analysis is made of the transient free convection from a vertical flat plate which is embedded in a fluid-saturated porous medium. It is assumed that for time a steady state temperature or velocity has been obtained in the boundary-layer which occurs due to a uniform flux dissipation rate . Then at time the heat flux on the plate is suddenly changed to and maintained at this value for 0$$ " align="middle" border="0"> . An analytical solution has been obtained for the temperature/velocity field for small times in which the transport effects are confined within an inner layer adjacent to the plate. These effects cause a new steady boundary layer. A numerical solution of the full boundary-layer equations is then obtained for the whole transient from to the steady state, firstly by means of a step-by-step method and then by a matching technique. The transition between the two distinct solution methods is always observed to occur very near to the turning point of the plate surface temperature, a time at which the fluid temperature is close to its steady state profile. The solution obtained using the step-by-step method shows excellent agreement with the small time analytical solution. Results are presented to illustrate the occurrence of transients from both small and large increases and decreases in the levels of existing energy inputs.     

Finite Element Solution of Mixed Convection on a Moving Vertical Cylinder with Suction in a Moving Micropolar Fluid Medium

In this paper the problem of mixed convection on a moving vertical cylinder with suction in a moving micropolar fluid medium has been investigated, using finite element method. The effect of important parameters, namely micropolar parameter, suction parameter and velocity coefficient parameter have been discussed on the velocity, microrotation and temperature functions when the velocity of the cylinder is greater than the free stream velocity. Skin friction and the Nusselt number have also been computed, which are given in the table. The temperature distribution is effected moderately by the motion of the cylinder as well with the buoyancy parameter.     

Numerical Investigation of the Plane Problem of Convection of a Multicomponent Fluid in a Porous Medium

Scenarios of the development of continuous families of steady-state regimes branching off from mechanical equilibrium are investigated for the plane problem of filtrational convection of a multicomponent fluid saturating a porous block of rectangular cross-section. Convection of two- and three-component fluids is considered and unidirectional and differently directed vertical temperature and concentration gradients are analyzed. A new scenario of the formation of a continuous family of steady-state solutions realized in the case of oscillatory instability of mechanical equilibrium is studied.     

Mixed Convection Boundary Layer Flow Past a Horizontal Circular Cylinder Embedded in a Bidisperse Porous Medium

Adopting a two-temperature and two-velocity model, appropriate to a bidisperse porous medium (BDPM) proposed by Nield and Kuznetsov (2008), the classical steady, mixed convection boundary layer flow about a horizontal, isothermal circular cylinder embedded in a porous medium has been theoretically studied in this article. It is shown that the boundary layer analysis leads to expressions for the flow and heat transfer characteristics in terms of an inter-phase momentum parameter, a thermal diffusivity ratio, a thermal conductivity ratio, a permeability ratio, a modified thermal capacity ratio, and a buoyancy or mixed convection parameter. The transformed partial differential equations governing the flow and heat transfer in the f-phase (the macro-pores) and the p-phase (the remainder of the structure) are solved numerically using a very efficient implicit finite-difference technique known as Keller-box method. A good agreement is observed between the present results and those known from the open literature in the special case of a traditional Darcy formulation (monodisperse system).     

Effects of Temperature-Dependent Viscosity on Forced Convection Inside a Porous Medium

Considering the exponential viscosity–temperature relation, effect of temperature-dependent viscosity on forced convection of a liquid through a porous medium, bounded by isoflux parallel plates, is investigated numerically based on the general model of momentum transfer. Local effects of viscosity variation on the distribution of velocity and temperature are analyzed. Moreover, global aspects of the problem are investigated where corrections are proposed for total pressure drop and the fully developed Nusselt number, in the form of out/in viscosity ratio. Results are obtained over a wide range of permeabilities from clear (of solid material) fluid to very low permeability, where for constant properties one expects a nearly slug flow.     

Modelling the Effect of Surface Tension on Immiscible Displacement in a Saturated Porous Medium

Comments are made about the model employed by Chen and Vafai for forced convection in a porous medium channel, with a surface tension effect at the moving interface between two fluids, when one fluid is displaced by the other. A simple situation is analysed, and the circumstances under which surface tension effects are important in this case are clarified.     

Modulated Centrifugal Convection in a Vertical Rotating Porous Layer Distant from the Axis of Rotation

The effect of rotation speed modulation on the onset of centrifugally driven convection has been studied using linear stability analysis. Darcy flow model with zero-gravity is used to describe the flow. The perturbation method is applied to find the correction in the critical Rayleigh number. It is found that by applying modulation of proper frequency to the rotation speed, it is possible to delay or advance the onset of centrifugal convection.     

磁性流体密封磁场的解耦计算

分析了磁性流体密封中的磁场与力场的耦合问题,采用边界逼近的迭代方法准确计算了磁场分布,进而求出了密封压差,分析了解耦计算与线性计算的差别.结果表明,随着磁性流体磁化强度的提高,解耦计算与线性计算的差别增大.     

Thermal Dispersion Effects on Combined Convection in Non-Newtonian Fluids Along a Nonisothermal Vertical Plate in a Porous Medium

The method of non-similarity solution is used to study the influence of thermal dispersion on combined convection from vertical surfaces in a porous medium saturated with a power-law type non-Newtonian fluid. The coefficient of thermal diffusivity has been assumed to be the sum of molecular diffusivity and the dispersion thermal diffusivity due to mechanical dispersion. The transformed conservation laws are solved numerically for the case of variable surface heat flux conditions. Results for the details of the velocity and temperature fields as well as the Nusselt number have been presented.     

Rayleigh–Taylor Instability of Rotating Oldroydian Viscoelastic Fluids in Porous Medium in Presence of a Variable Magnetic Field

The instability of the plane interface between two oldroydian viscoelastic superposed fluids in the presence of uniform rotation and variable magnetic field in porous medium is considered. For potentially stable configuration, the system is found to be stable for disturbances of all wave numbers. The magnetic field succeeds in stabilizing certain wave-number range, which were unstable in the absence of magnetic field and rotation for the potentially unstable configuration. Sub cases of magnetic free and rotation free configurations are also considered, separately.