Blue Tetrakis(diisopropylamino)-cyclo-tetraborane and Yellow Tetrakis(tetramethylpiperidino)tetrabora-tetrahedrane

The colored boranes closo- 1 and cyclo- 2 are obtained upon dehalogenation of sterically hindered diaminodichlorodiborane(4) 3 . The TMP groups of 1 cause the formation of a tetrahedrane, whereas in 2 the diisopropylamino substituents stabilize the bent four-membered ring. TMP=2,2,6,6-tetramethylpiperidino.     

取代基对2-脲基-4(1H)-嘧啶酮衍生物聚集行为的影响

UPy结构上的6位取代基会影响UPy结构上的离域π电子云的密度,6位取代基的给电子诱导效应越强,π电子云的密度越大,四重氢键的作用越强。脲基嘧啶酮结构即UPy结构的二聚体存在着最低的势能,表明该结构在体系内最为稳定。随着嘧啶环上的电子云密度增加,离域π键间的电子斥力增强,(001)晶面间距d逐渐增大。异氰酸酯结构的空间位阻的增大会阻碍UPy中的氢原子与相邻的嘧啶酮之间的接触,使得氢键作用强度减弱,同时较大的空间位阻会阻碍嘧啶环间的π–π相互作用,使得(001)晶面间距增大。     

Facile preparation of methylcellulose/poly(vinyl alcohol)physical complex hydrogels with tunable thermosensitivity

Novel complex hydrogels of methylcellulose(MC)and poly(vinyl alcohol)(PVA)with wide-spectrum thermoresponsivity were prepared via physical and mild process.Thermal phase transition of MC/PVA hydrogels exhibited two forms including sol/sol to gel/sol and sol/gel to gel/gel.The phase transition temperature of MC/PVA solution ranged from 38.7 to 60.6℃and was able to be adjusted by simply changing the feeding ratios of two components.The interior morphology of MC/PVA gels was examined with fluorescence analy...     

Synthesis and reactions of p-vinylbenzyltris(trimethylsilyl)methane

Benzyl chloride was treated with (Me₃Si)₃CLi to give (Me₃Si)₃CCH₂Ph (1). A new styrene derivative, (Me₃Si)₃CCH₂C₆H₄(CHCH₂-p) (2), was synthesized by reaction of p-vinylbenzyl chloride with (Me₃Si)₃CLi in the presence of CuCl. Addition and oxidation reactions on 2 gave a series of new compounds (Me₃Si)₃CCH₂C₆H₄X-p (X = CH₂CH₃, CHBrCH₂Br, CHClCH₂I, CHBrCH₂I, cyclo-C₃H₃Cl₂, CHOHCH₂OH, COOH, CH₂OH).     

利用空间位阻和氢溢流协同作用促进5-羟甲基糠醛选择性加氢制备5-甲基糠醛

化学工业生产中，用氢气为还原剂，通过选择性加氢可以制备多种重要化学品。5-羟甲基糠醛是重要的生物质基平台化合物，而5-甲基糠醛是用途广泛的化学品。由5-羟甲基糠醛加氢得到5-甲基糠醛是一条非常理想的路径，但是选择性活化C-OH非常困难。本文设计并制备了Pt@PVP/Nb₂O₅(PVP: 聚乙烯吡咯烷酮)催化剂，该催化体系巧妙地结合了位阻效应、氢溢流和催化剂界面的电子效应，系统研究了该催化剂对5-羟甲基糠醛选择性加氢制备5-甲基糠醛催化性能，在最优条件下，5-甲基糠醛的选择性可达92%。利用密度泛函理论计算研究了5-羟甲基糠醛选择性加氢制备5-甲基糠醛反应路径。     

利用空间位阻和氢溢流协同作用促进5-羟甲基糠醛选择性加氢制备5-甲基糠醛

Selective hydrogenation is a vital class of reaction. Various unsaturated functional groups in organic compounds, such as aromatic rings, alkynyl (C≡C), carbonyl (C＝O), nitro (-NO₂), and alkenyl (C＝C) groups, are typical targets in selective hydrogenation. Therefore, selectivity is a key indicator of the efficiency of a designed hydrogenation reaction. 5-(Hydroxymethyl)furfural (HMF) is an important platform compound in the context of biomass conversion, and recently, the hydrogenation of HMF to produce fuels and other valuable chemicals has received significant attention. Controlling the selectivity of HMF hydrogenation is paramount because of the different reducible functional groups (C＝O, C-OH, and C＝C) in HMF. Moreover, the exploration of new routes for hydrogenating HMF to valuable chemicals is becoming attractive. 5-Methylfurfural (MF) is also an important organic compound; thus, the selective hydrogenation of HMF to MF is an essential synthetic route. However, this reaction has challenging thermodynamic and kinetic aspects, making it difficult to realize. Herein, we propose a strategy to design a highly efficient catalytic system for selective hydrogenation by exploiting the synergy between steric hindrance and hydrogen spillover. The design and preparation of the Pt@PVP/Nb₂O₅ catalyst (PVP = polyvinyl pyrrolidone; Nb₂O₅ = niobium(V) oxide) were also conducted. Surprisingly, HMF could be converted to MF with 92% selectivity at 100% HMF conversion. The reaction pathway was revealed through the combination of control experiments and density functional theory calculations. Although PVP blocked HMF from accessing the surface of Pt, hydrogen (H₂) could be activated on the surface of Pt due to its small molecular size, and the activated H₂ could migrate to the surface of Nb₂O₅ through a phenomenon called H₂ spillover. The Lewis acidic surface of Nb₂O₅ could not adsorb the C＝O group but could adsorb and activate the C-OH group of HMF; therefore, when HMF was adsorbed on Nb₂O₅, the C-OH groups were hydrogenated by the spilled over H₂ to form MF. The high selectivity of this reaction was realized because of the unique combination of steric effects, hydrogen spillover, and tuning of the electronic states of the Pt and Nb₂O₅ surfaces. This new route for producing MF has great potential for practical application owing to its discovered advantages. We believe that this novel strategy can be used to design catalysts for other selective hydrogenation reactions. Furthermore, this study demonstrates a significant breakthrough in selective hydrogenation, which will be of interest to researchers working on the utilization of biomass, organic synthesis, catalysis, and other related fields.      

Synthesis and reactions of [tris(trimethylsilyl)methyl]ethyl dichlorosilane

The crowded dichlorosilane TsiSiEtCl₂, (1), (Tsi = (Me₃Si)₃C) was prepared from the reaction between EtSiCl₃ and TsiLi, then it was reduced with LiAlH₄ to give TsiSiEtH₂, (2). The hydride (2) was then treated with two equivalents of ICl/CCl₄ or Br₂/CCl₄ to produce TsiSiEtI₂, (3), and TsiSiEtBr₂, (4), respectively. The reaction of compound (2) with one equivalent of ICl/CCl₄ gives TsiSiEtHI, (5). This product reacted with H₂O/dioxane in the presence of AgClO₄ or with dry MeOH to produce TsiSiEtHOH, (6), and TsiSiEtHOMe, (7), respectively. The compound (3) reacted with H₂O in DMSO/CH₃CN to give TsiSiEt(OH)₂, (8), and the compound TsiSiEtIOMe, (9), was prepared from the reaction of the compound (7) with ICl/CCl₄. When the dichloride (1) was treated with NaOMe/MeOH it gave (Me₃Si)₂CHSiEt(OMe)₂. It is suggested that the reaction proceeds through an elimination-addition mechanism. The dichloride (1) was also treated with KSCN, NaN₃ or NaOCN in CH₃CN to give S_N2 substitution products. All the new products were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, mass spectrometry and elemental analysis.     

Bay区取代苝二酰亚胺分子构型及聚集调控:邻位甲基位阻效应

设计并合成了2种苝二酰亚胺分子PBI1和PBI2,研究了bay区的苯氧基团邻位甲基取代对分子构型及分子聚集的影响.通过对单晶结构的分析,发现邻位甲基的引入明显影响苝二酰亚胺分子构型,使得4个苯氧基呈中心对称分布.由于甲基的空间位阻效应,有效地减弱了分子间π-π相互作用,从而提高了分子的溶解性与溶液加工成膜性.研究结果表明,在π共轭分子结构中的关键位置引入小的甲基取代基能够显著调控分子的聚集行为,有效减少光电材料分子中非光电活性(增溶性基团)的含量,对光电材料分子的设计合成具有重要的指导意义.     

Overcoming steric effects in the coupling reaction of alkyloxycarbonyloxymethyl (AOCOM) halides with phenols: an efficient synthesis of AOCOM phenolic prodrugs

Steric hindrance is a key factor in the coupling reaction of AOCOM halides with phenols. Sterically unhindered alkoxy groups favor the formation of acylated phenol. Under phase-transfer conditions, alkylated phenol is favored regardless of steric hindrance.     

pH-effects in the complex formation of polymers I. Interaction of poly(acrylic acid) with poly(acrylamide)

The effects of polymer concentration, molecular weight of poly(acrylic acid) (PAA), addition of sodium, potassium, ammonium and copper (II) chlorides on the complex formation ability of the system PAA-poly(acrylamide) (PAAM) have been studied in aqueous solutions. The critical pH values of the complexation were determined in different conditions. The complex formation ability of PAAM is compared with other non-ionic polymers. It was shown that an increase in polymers concentration, molecular weight of PAA and ionic strength favours the complexation and shifts the critical pH values to the higher pH region. An addition of CuCl₂ to the mixture of two polymers enhances the complexation drastically due to the formation of triple complexes.     

Interaction of collagen and poly(vinyl pyrrolidone) in blends

The interaction between collagen and poly(vinyl pyrrolidone) (PVP) in blends has been studied by viscometry, differential scanning calorimetry (DSC) and by Fourier transform infrared spectroscopy (FTIR). It was found that the amide A and amide I bands position in FTIR spectra of collagen were shifted after blending with PVP to higher wavenumbers. DSC measurements showed different melting temperature, glass transition temperature and enthalpy for the blends and for the single components. Viscosity measurements showed interaction between collagen and PVP also in a dilute water solution.The results have shown, that the interactions between collagen and PVP exist due to the strong interactions between the synthetic and biological component, mainly by hydrogen bonds. These interactions caused that collagen and PVP are miscible at molecular level. The blending of collagen with PVP may give the possibility of producing new materials for potential biomedical applications.     

Drying dissipative structures of the thermosensitive gels of poly(N-isopropyl acrylamide) on a cover glass

Drying dissipative structural patterns of the thermosensitive gels of poly(N-isopropyl acrylamide) were studied on a cover glass. As the temperature of suspension and room rose from 25 to 50 °C, the small size of drying pattern area extended to the beautiful flickering spoke-like ones transitionally at the critical temperature ca. 35 °C. The principal patterns at 25 °C were the single or multiple broad rings of the hill accumulated with the gels. At 50 °C, on the other hand, the flickering spoke-like patterns were observed at the inner area of the broad ring especially at the gel concentrations higher than 1 × 10⁻³ g/ml. These observations support that the extended gels at low temperatures apt to associate weakly to each other, whereas the gels at high temperatures shrink and move rather freely with the convectional flow of water, though the very weak intergel attractions still remain. In the presence of sodium chloride at high temperatures, the cooperative patterns formed between the gel spheres and the salt. The gravitational and Marangoni convectional flow of the gels and the very weak interactions between the gels and substrate (cover glass) are important for the flickering spoke-like pattern formation.     

Facile Total Synthesis of (±)‐Nimbiol

A facile total synthesis of (±)‐nimbiol 1 has been achieved. In order to decrease the dioxo byproduct 2a , an improved oxidation system of CrO₃/H₂O/HOAc/NaOAc was used.     

Effects of reaction temperature and reaction time on positive thermosensitivity of microspheres with poly(acrylamide)/poly(acrylic acid) IPN shells

We have successfully prepared monodispersed positively thermoresponsive core-shell hydrogel microspheres with poly(acrylamide-co-styrene) [P(AAM-co-St)] cores and IPN(interpenetrating polymer network)-based shells composed of poly(acrylamide)/poly(acrylic acid). The submicron-sized monodispersed P(AAM-co-St) core seeds were prepared by using a surfactant-free emulsion polymerization method, and the IPN-based shell layers were fabricated onto the core seeds by using a method of sequential IPN synthesis. Effects of reaction time and reaction temperature during preparation of IPN on the particle size, monodispersity, and thermoresponsive characteristics of microspheres were investigated. The results show that the sizes of particles with IPN shell layer are smaller than that of seeds, and the change of monodispersity among them is not obvious and the monodispersity of particles prepared under higher reaction temperature is higher than that of seeds and those particles prepared under lower reaction temperature. With increasing reaction time, thermoresponsive characteristics of microspheres increases. While thermoresponsive characteristics of microspheres decreases sharply with increasing reaction temperature. The results display preparation of IPN-structured microspheres is so careful to need longer reaction time and lower reaction temperature.     

Molecular chain properties of poly (N-isopropyl acrylamide)

A series of poly( N-isopropyl acrylamide) (PNIPAM) samples with molecular weight ranging from 2.23×10~4 to 130×10~4 and molecular weight distribution M_w/M_n≤1.28 were obtained by free radical polymerization and repeat precipitation fractionation. The molecular weight M_w, second virial coefficient A_2 as well as the mean-square-root radius of gyration 〈S~2〉 for PNIPAM samples in tetrahydrofuran (THF) were determined by light scattering, and the relations were estimated at A_2 ∞ M_w~0.25) and 〈S~2〉~(1/2)=1.56×10~(-9) M_w~(0.56). The intrinsic viscosity for THF solution and methanol solution of PNIPAM samples was measured and the Mark-Houwink equations were obtained as [η]=6.90×10~(-5) M~(0/73) (THF solution) and [η]=1.07×10~(-4) M~(0.71) (methanol solution). The above results indicate that both THF and methanol are good solvents for PNIPAM. The limit characteristic ratio C_∞ for PNIPAM in the two solutions was determined to be 10.6 by using Kurata-Stockmayer equation, indicating that the f     

Stereochemistry and reactivity of the HPA-imine Mannich intermediate

Homophthalic anhydride (HPA) typically reacts rapidly with benzalimines to afford the formal [4+2] adduct, a 1,2,3,4-tetrahydroisoquinolin-1-one-4-carboxylic acid. The stereochemical outcome of this reaction is consistent with an open transition state comprising an iminium species and enolized HPA, leading to a short-lived amino-anhydride intermediate. In the case of N-tert-butylbenzalimine, this Mannich-type intermediate, which would normally cyclize at low temperature to a single isomer of the delta-lactam, is intercepted by base treatment to afford beta-lactam products. A pathway featuring ketene formation followed by ring closure is implicated.     

Glass transition study of blends of poly(N-methyldodecano-12-lactam) with poly(styrene-co-acrylic acid)

The blends of poly(N-methyldodecano-12-lactam) (MPA) with poly(styrene-co-acrylic acid) (PSAA) prepared from dioxane solutions were studied by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The experimental DSC data of glass transition temperature T_g as a function of composition of amorphous phase were fitted for the as-prepared and re-scanned samples using theoretical approaches. The as-prepared blends show monotonic single-T_g dependence. The values of the Gordon-Taylor coefficient not far from unity suggest miscibility of the blend system in amorphous phase in the whole concentration range. As documented by FTIR, this miscibility is associated with hydrogen bonds between COOH groups of the acrylic acid units in PSAA molecules acting as the H-bond donor and CO groups of MPA acting as the H-bond acceptor. The T_g-dependencies obtained form the second runs have a profound sigmoid character. The Schneider treatment induced an idea of partial limited miscibility in the MPA/PSAA blends caused by prevalence of homogeneous contacts. The difference in T_g between the first and second run can partly be attributed to higher crystallinities in the former.     

Gelation of a Highly Fluorescent Urea‐Containing Triarylmelamine Derivative: 2,4,6‐Tris(p‐N′‐Octadecylureido‐Anilino)Triazine in Organic Solvents

A new gelator of urea‐containing triazine derivatives was synthesized and tested in order to explore the gelation potential in different organic solvents. This compound has been found to form organogels with a variety of organic solvents such as decalin and other solvents. The resulting thermo‐reversible gel was characterized by using the dropping ball method and a number of other instruments. The melting temperature of the gel increased with the gel concentration. The intermolecular hydrogen bonding of gelation was demonstrated through an FT‐IR spectrometer. UV‐Vis and fluorescence analysis showed that the gel displayed various optical effects in different organic solvents. The blue fluorescence of the gel in decalin and the quenched effect of gel in CHCl³ were displayed, respectively. Morphological features in decalin and CHCl₃ were studied by applying atomic force microscopy (AFM), and the morphological features demonstrated that there were different aggregations in different solvents. In conductivity electrolyte experiments, the organogel electrolytes indicated high conductivity (σ) comparable to the corresponding NaClO₄/THF solution. The conductivity of gel electrolytes was increased with electrolyte salt.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

Synthesis and characterization of new, modified terphenyl ligands: Increasing the rotational barrier for flanking rings

The synthesis and characterization of some new terphenyl ligands, modified by meta alkyl substitution on the central ring are described. The new ligands were designed for potential applications in the stabilization of novel low valent main group species or transition metal heteronuclear multiply bonded compounds. Compounds (1), (3) (Mes = 2,4,6-trimethylphenyl), (5) (Trip = 2,4,6-triisopropylphenyl) and (6) (Dipp = 2,6-diisopropylphenyl) were obtained by addition of two equivalents of the corresponding aryl Grignard reagent to the benzyne intermediate generated by lithiation with BuⁿLi of the starting material 2,4-dichloro-5-isopropylcumene, followed by quenching with iodine. The lithium salts of 2 and 4 were obtained treatment of the parent terphenyl iodides with one equivalent of nBuLi. All compounds were isolated as either colorless crystals or as white powders. They were characterized by ¹H and ¹³C NMR spectroscopy and (in the case of 1 and 3) by X-ray crystallography. DFT calculations were performed on model terphenyl molecules in an attempt to estimate how much the rotation barriers of the flanking aryls can be influenced by substitution by alkyl groups of the two meta positions on central ring.