首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
通过粘度、紫外光谱、红外光谱和DSC谱的测定,探讨了PVP/HEC分子间的缔合机理.结果表明,PvP/HEC复合体系相对于单一体系产生了粘度的负协同效应,NaCl的加入使单一体系和复合体系的粘度均下降;在紫外可见吸收光谱中,PVP/HEC复合体系的最大吸收波长λmax相对于PVP、HEC各自的λmax都发生红移;PVP/HEC复合物的红外光谱在2370 cm-1出现新的吸收峰;DSC谱中复合物的峰温高于简单混合物,而其焓变低于简单混合物,这一切均证明HEC与PVP之间未发生疏水缔合,而是HEC的羟基与PVP的羰基之间通过氢键缔合成复合物,复合物的分子链排列较为紧密.  相似文献   

2.
In order to utilize the produced liquid of hydrolyzed polyacrylamide (HPAM) flooding to enhance oil recovery, the interaction between hydrophobically modified polyacrylamide (HMPAM) and the produced liquid of HPAM flooding was investigated. The viscous characteristic of HMPAM in aqueous solution was investigated by Ubbelohde viscometer. The results show the intrinsic viscosity of HMPAM in aqueous solution is higher than that of HPAM, indicating that HMPAM has better effect on increasing the viscosity of aqueous solution. The viscosity of the complex system consisted of HMPAM and the produced liquid from HPAM flooding is lower than that of the HMPAM system, but higher than that of the HMPAM/HPAM complex system in mineralized water. In order to investigate the major factor of the influence on the viscosity of the HMPAM/produced liquid complex system, the viscosities of HMPAM/HPAM (and hydrolyzed HPAM with different hydrolysis degree) in distilled water and in mineralized water were studied. The fluorescence spectrum and transmission electron microscopy measurements were carried out to investigate the interaction between HPMAM and produced liquid from a microscopic perspective. These results are useful for farther enhancing oil recovery after HPAM flooding.  相似文献   

3.
利用流变学方法, 采用核磁共振和红外光谱技术开展了聚乙烯吡咯烷酮(PVP)和LiCl相互作用研究, PVP/LiCl/DMF浓溶液的表观粘度随着LiCl含量的增加而提高, 溶液的粘流活化能也相应增加. 13C NMR结果表明, 溶液中Li+与PVP的羰基之间存在相互作用, 这种相互作用改变了PVP分子的聚集状态. 红外光谱结果证实了PVP/LiCl复合物中Li+与PVP的羰基存在相互作用.  相似文献   

4.
This work presents experimental results on simple shear and porous media flow of aqueous solutions of two hydroxyethyl celluloses (HEC) and two hydrophobically modified hydroxyethyl celluloses (HMHEC) with different molecular weights. Mixtures of these polymers with a cationic surfactant, cetyltrimethylammonium p-toluenesulfonate (CTAT) were also studied. Emphasis was given to the range of surfactant concentrations in which wormlike micelles are formed. The presence of hydrophobic groups, the effect of the molecular weight of the polymers, the surfactant and polymer concentrations, and the effect of the flow field type (simple shear versus porous media flow) were the most important variables studied. The results show that the shear viscosity of HEC/CTAT solutions is higher than the viscosities of surfactant and polymer solutions at the same concentrations, but surface tension measurements indicate that no complex formation occurs between CTAT and HEC. On the other hand, a complex driven by hydrophobic interactions was detected by surface tension measurements between CTAT and HMHEC. In this case, the viscosity of the mixture increases significantly more (up to four orders of magnitude at high CTAT concentrations) in comparison with HEC/CTAT aqueous solutions. Increments in the molecular weight of the polymers increase the interaction with CTAT and the shear viscosity of the solution, but make phase separation more feasible. In porous media flow, the polymer/CTAT mixtures exhibited higher apparent viscosities than in simple shear flows. This result suggests that the extensional component of the flow field in porous media flows leads to a stronger interaction between the polymer and the wormlike micelles, probably as a consequence of change of conformation and growth of the micelles.  相似文献   

5.
Homogeneous blends of two solutions of carboxymethylcellulose and hydroxyethylcellulose (HEC) were studied with respect to viscosity properties at different blending ratios, shear rates and temperatures. The blends exhibited viscosity synergism at all blending ratios, as well as improved shear and temperature stability. Maximum synergism was observed for the blend containing 67% of HEC. The UV and IR spectra showed that the hydrogen-bonding interaction between the blended components is the main reason for the synergism. Received: 9 February 1999 Accepted in revised form: 15 April 1999  相似文献   

6.
聚丙烯酰胺(HPAM)是油田常用的驱油聚合物,用油田污水配制HPAM溶液易导致其黏度明显降低,影响驱油效果。依据埕东油田污水实测的各种金属阳离子含量来配制HPAM溶液,测得各金属阳离子对其黏度影响由大到小的顺序为:Na+>Fe2+>Ca2+>K+>Mg2+;通过红外光谱和扫描电镜分析金属阳离子导致HPAM溶液降黏的机理,Na+、K+、Ca2+、Mg2+主要是通过与HPAM链上的羧酸根阴离子静电引力相互作用,降低HPAM分子表面原有的电荷密度,造成分子链卷曲,同时减弱了极性基团的溶剂化能力,释放大量的"束缚水",从而使黏度显著降低;Fe2+离子主要是与水中溶解氧共同作用,引发自由基反应,导致HPAM骨架水解断裂,致使黏度显著降低。  相似文献   

7.
部分水解聚丙烯酰胺-羟乙基纤维素的水相pH响应性自组装   总被引:1,自引:0,他引:1  
为考察无规共聚物在全水相环境中的自组装行为, 合成了结构类似于无规共聚物的低相对分子质量的部分水解聚丙烯酰胺(HPAM). 尝试改变水溶液pH值来诱导HPAM与羟乙基纤维素(HEC)发生自组装, 采用透射电子显微镜(TEM)观察到不同pH值时分别获得了100 nm的似正方体胶束, 200 nm×100 nm的类椭球胶束, 100 nm的串珠状胶束以及500 nm×300 nm×50 nm的半月形胶束等pH响应性核壳型聚合物胶束. 建立了金在胶束表面原位还原耦合TEM表征方法, 用于检测低衬度聚合物胶束的纳米细节; 配合电子探针X射线微区分析(EPMA)和扫描电子显微镜(SEM), 证实了半月形聚合物胶束的精致分级构造为亲水性内囊@疏水性连续囊壁@亲水性外壳的多泡囊泡, 并证实pH=0.9时多泡囊泡崩解为疏水性内核@亲水性外壳的10 nm类球体小胶束. 通过分析链节质子化状态的pH响应性, 结合zeta电位和吸光度测定结果, 阐释了不同pH值时组成聚合物胶束的核和壳的链段归属, 获得了全水相中HPAM自组装驱动力和形貌方面的全新知识.  相似文献   

8.
The interaction of sodium dodecyl sulfate (SDS) in aqueous solution with poly(N-vinyl-2-pyrrolidone) (M(w) = 55,000 g/mol) in the presence of poly(ethylene glycol) (M(w) = 8000 g/mol) is investigated by electrical conductivity, zeta potential measurements, viscosity measurements, fluorescence spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate that SDS-polymer interaction occurs at low surfactant concentration, and its critical aggregation concentration is fairly dependent on polymer composition. The polymer-supported micelles have average aggregation numbers dependent on surfactant concentration, are highly dissociated when compared with aqueous SDS micelles, and have zeta potentials that increase linearly with the fraction of PVP at constant SDS concentration. The analysis of the SAXS measurements indicated that the PVP/PEG/SDS system forms surface-charged aggregates of a cylindrical shape with an anisometry (length to cross-section dimension ratio) of about 3.0.  相似文献   

9.
INTERACTION OF POLYVINYLPYRROLIDONE WITH METAL CHLORIDE AQUEOUS SOLUTIONS   总被引:1,自引:0,他引:1  
Interactions of polyvinylpyrrolidone (PVP) with metal chlorides (MgCl2, CaCl2, KC1 and BaC12) have been investigated by viscometric and spectrophotometric techniques in aqueous solutions. Intrinsic viscosity [η] of (PVP) has shown a discontinuity with varying concentration of metal chlorides. The decreasing order of effectiveness of cation is K1 >Ca2 > Mg2 > Ba2 for poly(vinylpyrrolidone) solution. Changes in the absorption spectra of the cosolutes were observed in the presence of PVP in the lower limit of the UV-visible region i.e. 200-210 nm. These changes were attributed to interaction of PVP molecules with the cosolute molecules. As the concentration of the cosolute increased, a red shift in the peaks was observed, indicating an increase in interaction between PVP and cosolutes.  相似文献   

10.
Novel cationic hydroxyethyl cellulose (HEC) polymers with different molecular weights (1.1 x 10(5) to 1.7 x 10(6) g/mol) and ethylene oxide (EO) side chain lengths (1.5-2.9 EO units) were mixed with sodium dodecyl sulfate (SDS) in aqueous solutions. The phase diagrams of cationic HEC-SDS complexes were determined in the dilute polymer concentration regime (< 0.5 wt %) with gradual addition of SDS molecules. The viscosity and structures of the complexes during the phase evolution were studied using rheometry and dynamic light scattering. The gradual addition of SDS first induced interchain associations with the bound SDS aggregates serving as cross-linkers to form an open network structure, producing a very broad size distribution and high viscosities of the complex solutions, and then condensed the network and induced a structure reorganization, resulting in globular aggregates with narrow size distributions. The growth of these globular aggregates in size eventually led to macroscopic sedimentation near charge neutralization. Further addition of SDS randomly broke the sedimentary aggregates into small particles and SDS micelles with low solution viscosities. The effects of molecular weight and EO side chain length of polymers on the phase boundary, viscosity, and structure of cationic HEC-SDS complexes were discussed.  相似文献   

11.
表面活性剂与聚丙烯酰胺在油水界面的流变性   总被引:4,自引:0,他引:4  
界面流变学是研究界面膜在外力作用下流动与形变的科学,界面粘度是油水界面膜的一种重要性质,它的大小与成股分子排列的紧密程度、成膜分子相互作用力的大小和是否有结构形成有关[‘1,人们早就对表面流变性质进行了相当系统而深入的研究[’41,但是有关油水界面流变性质的  相似文献   

12.
Hydroxyethylcellulose (HEC) was synthesized by a fully homogenous method from cellulose in 7.5 wt.-% NaOH/11 wt.-% urea aqueous solutions under mild conditions. HEC samples were characterized with NMR, SEC-LLS, solubility, and viscosity measurements. The MS and DS values of the obtained HEC samples are in the range from 0.54 to 1.44 and 0.45 to 1.14, respectively, and the relative DS values at C-2 and C-6 hydroxyl groups are slightly higher than those at C-3 hydroxyl groups. HEC samples are soluble in water starting from a MS of 0.57 and DS of 0.49, which display high viscosity in aqueous solutions. Moreover, a NaOH/urea aqueous solution is a stable system for cellulose etherification. In this way, we could provide a simple, pollution-free, and homogeneous aqueous solution system for synthesizing cellulose ethers.  相似文献   

13.
聚合物PVP与表面活性剂AOT相互作用的介观模拟   总被引:8,自引:0,他引:8  
用耗散颗粒动力学模拟(DPD)方法研究了聚乙烯吡咯烷酮(PVP)与2-乙基己基琥珀酸酯磺酸钠(AOT)之间的相互作用.在三维模拟格子中,聚合物链均方末端距〈r2〉随着表面活性剂浓度的增加呈现一种首先减小,接着增加,然后又减小的趋势.构型和结构分析表明,AOT的加入能够引起聚合物链的二面角分布发生改变,这意味着AOT与PVP产生了相互作用.同时表面活性剂/聚合物体系的聚集形态也可以在DPD三维模拟格子中直观显现出来.  相似文献   

14.
粘度法研究胶态分散凝胶交联过程   总被引:27,自引:0,他引:27  
通过粘度测定方法,研究了部分水解聚丙烯酰胺(HPAM)/ 柠檬酸铝(AlCit) 交联过程中粘度变化的特性.聚合物浓度高的HPAM/AlCit 体系粘度随反应时间的延长而上升,其体系粘度最终高于相同聚合物浓度的HPAM 溶液粘度.聚合物浓度低的HPAM/AlCit 体系粘度随反应时间的延长而下降,其体系粘度低于相同聚合物浓度的HPAM 溶液粘度.HPAM/AlCit 交联体系的聚合物浓度低于临界浓度时,交联反应后形成稀胶态分散凝胶(TCDG) .在实验条件下,临界浓度在150 ~300mg/L 之间.当聚合物浓度于临界浓度和700mg/L之间时,形成浓胶态分散凝胶(CCDG) ;当聚合物浓度高于700mg/L 时,HPAM/AlCit 交联体系形成整体凝胶.  相似文献   

15.
The anti-tack action of polyvinylpyrrolidone (PVP) on hydroxypropylmethylcellulose (HPMC) solution was elucidated using a probe test method. The influence of PVP of varying molecular weights at various PVP concentrations and solution temperatures on the tackiness of HPMC solution was studied. The viscosity, surface tension, cloud point and solution spectroscopy of HPMC solutions and glass transition temperature of HPMC films, with and without PVP, were investigated. The tackiness of HPMC solutions in response to the addition of PVP, at different concentrations of HPMC and using HPMC with varying contents of hydroxypropyl/methoxyl substitution, was also evaluated. PVP is a commonly used binder and adhesive. However, it reduced the tack of the HPMC solution when used at low concentrations, without affecting the state of hydration of HPMC. Lower molecular weight PVP was more effective as an anti-tack agent owing to suitable hydrodynamic size to intersperse among the HPMC chains. The degree of reduction in tack values was more pronounced for HPMC that showed a greater extent of interaction between polymer chains such as when high concentration of HPMC or low solution temperature was employed. This indicated that the tack reduction property of PVP relied on its ability to interact with the HPMC chains. The profile of reduction in tack values was affected by the contents of HPMC substitution and was a result of net reduction in the extent of hydrogen bonding between HPMC chains. It was significantly correlated to the changes of viscosity and surface tension of the HPMC solutions but not to the glass transition temperatures of the polymers prepared as solid films. The results suggested that the anti-tack action of PVP was attributed to its ability to interact with HPMC chains in the aqueous medium and consequently to reduce the extent of HPMC-HPMC bonding.  相似文献   

16.
以不同平均分子质量的聚乙烯吡咯烷酮(PVP,通常用K值来表示PVP溶液相对粘度的特征值,粘度越大,PVP平均分子质量越大,平均分子质量为8000、40000、160000、360000的PVP分别标记为K17、K30、K60、K90)为表面活性剂,通过水热法合成了形貌和光学共振峰可控的银纳米结构.将反应体系加入到60 mL的不锈钢高压反应釜中,在一定的温度下加热数小时.我们在K17的水溶液中合成了尺寸均一的五重孪晶银纳米十面体.而在K30、K60和K90的乙二醇(EG)溶液中得到了纵横比随着PVP分子质量增大而增大的银纳米线.产物的形貌和微结构通过透射电镜(TEM)和场发射扫描电镜(FE-SEM)进行表征,表面等离子共振(SPR)吸收峰通过紫外-可见分光光度计进行测试,结果显示银纳米结构的表面等离子共振随着其形貌和尺寸的改变而发生变化.  相似文献   

17.
水溶液中用硫酸亚铁-异丙苯过氧化氢氧化还原引发体系合成了丙烯酰胺(AM)/2-丙烯酰胺基十六烷磺酸铵(AMC_(16)SNH_4)无规共聚物。用元素分析、IR、~(13)C-NMR和~1H-NMR对其进行了表征。对水溶液性质的研究结果表明,与部分水解聚丙烯酰胺相比,这种新型共聚物有着优异的耐盐性、耐温性和贮存稳定性。  相似文献   

18.
聚丙烯酰胺的形态结构研究   总被引:12,自引:3,他引:12  
本文用电子显微镜深入的研完了部分水解聚丙烯酰胺在水溶液中的形态。给出大分子的伸展网状结构是其稀溶液高粘度的结构本质。并详细讨论了聚合物的水解度、分子量、外加盐种类及波度与分子聚集状态的关系。  相似文献   

19.
Abstract— As an artificial model compound of the chlorophyll-protein complex in vivo , the chlorophyll/water-soluble macromolecular complexes were prepared by using synthetic linear polymers of polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA), polyethylene glycol (PEG), and a natural polymer of bovine serum albumin (BSA). By the method described here, it is possible to prepare an aqueous chlorophyll (Chl)-macromolecular complex solution of a desired Chi aggregate, such as: Chi a (670), Chi a (740) and Chi b ; and with a desired relative content and concentration. These procedures for preparing such complexes will have wide applicability for technical use in Chi studies. For example, extremely diluted aqueous complex solutions of at least 1 × 10-4% wt Chi a (670 or 740)-macromolecular complex / wt can be obtained without changing the spectral features. From viscosity measurements, the structures of the complexes were inferred: (1) for a linear macromolecular (PVA or PVP) complex, a Chi species is tightly surrounded by a chain of the polymer causing shrinkage of the chain; (2) globular BSA molecules surround Chi species to form a large complex. The mechanism of stabilization of Chi aggregates in thylakoid membrane was discussed concerning an analogy to the complexes studied here.  相似文献   

20.
A series of water-soluble polymers such as poly(ethylene oxide)(PEO),polyacrylamide(PAM) and poly(vinyl pyrrilidone)(PVP) was successfully prepared via the electrospinning of their aqueous solutions without the use of a surfactant.The effects of solution properties on the electrospinning of PEO,PAM and PVP solutions were investigated.The viscosity of the solution,charge density carried by the jet,and the surface tension of the solution are the key factors that influence the morphology and diameter size of t...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号