Separation of carbon nanotubes in aqueous medium by capillary electrophoresis

A robust and reproducible method for the dispersion of carbon nanotubes, either single-walled or multi-walled is presented. Dispersion of nanotubes was achieved as surfactant-coated species of sodium dodecyl sulphate. The addition of small amounts of hydroxypropyl methyl cellulose (HPMC) together with the surfactant, sodium dodecyl sulphate, was found critical to achieve reproducible nanotubes dispersion and to obtain an homogeneous and stable solution. This solution is further analyzed by capillary electrophoresis using a background electrolyte solution containing a polymer, 0.025% (w/v) HPMC solution prepared in 5 mM ammonium acetate at pH 8.03. This electrophoretic method presents a high reproducibility between runs, being an interesting alternative to study nanotube size distribution or characterization after synthesis. In addition, the methodology developed allowed the study of the interaction of the different types of carbon nanotubes with a molecular probe such as pentachlorophenol. This procedure was showed effective to detect small differences on the chemical/physical surface properties of the nanotubes. The different interaction behavior found within the two SWNTs selected was critically discussed.     

Phase behavior of cationic hydroxyethyl cellulose-sodium dodecyl sulfate mixtures: effects of molecular weight and ethylene oxide side chain length of polymers

Novel cationic hydroxyethyl cellulose (HEC) polymers with different molecular weights (1.1 x 10(5) to 1.7 x 10(6) g/mol) and ethylene oxide (EO) side chain lengths (1.5-2.9 EO units) were mixed with sodium dodecyl sulfate (SDS) in aqueous solutions. The phase diagrams of cationic HEC-SDS complexes were determined in the dilute polymer concentration regime (< 0.5 wt %) with gradual addition of SDS molecules. The viscosity and structures of the complexes during the phase evolution were studied using rheometry and dynamic light scattering. The gradual addition of SDS first induced interchain associations with the bound SDS aggregates serving as cross-linkers to form an open network structure, producing a very broad size distribution and high viscosities of the complex solutions, and then condensed the network and induced a structure reorganization, resulting in globular aggregates with narrow size distributions. The growth of these globular aggregates in size eventually led to macroscopic sedimentation near charge neutralization. Further addition of SDS randomly broke the sedimentary aggregates into small particles and SDS micelles with low solution viscosities. The effects of molecular weight and EO side chain length of polymers on the phase boundary, viscosity, and structure of cationic HEC-SDS complexes were discussed.     

Influence of molecular characteristics of nonionic cellulose ethers on their interaction with ionic surfactant investigated by conductometry

The interaction between nonionic derivatives of cellulose, hydroxypropylmethyl cellulose (HPMC) and methyl cellulose (MC), and ionic surfactant, sodium dodecylsulfate (SDS) were investigated by conductometric titration method, at 30°C. Obtained titration curves show two break points: critical aggregation concentration (cac) defined as the concentration of SDS at which interaction starts, and polymer saturation concentration (psp) as the concentration at which interaction finishes. Changes of characteristic concentration breaks were determined in dependence on concentration and molecular characteristics of cellulose derivatives (degree of substitution (DS) and molecular mass, i.e. intrinsic viscosity). It was shown that the first break point, cac, is independent of polymer concentration; while the second break point, psp, increases as polymer concentration increases, as described by a linear correlation. The slopes of linear relationship justify the DS on the intensity of the cellulose derivatives–SDS interaction. Changes in the intrinsic viscosity of cellulose derivatives do not exhibit influence on the interaction with SDS.     

Synthesis of cellulose derivative based superabsorbent hydrogels by radiation induced crosslinking

Hydrogels with high water uptake were prepared by ionizing radiation induced crosslinking in aqueous solutions of four cellulose derivatives (carboxymethylcellulose sodium salt—CMC-Na, methylcellulose—MC, hydroxyethylcellulose—HEC and hydroxypropylcellulose—HPC). The gel fraction increased with absorbed dose, while water uptake decreased. At high polymer concentrations lower gel fractions were found due to the lower polymer chain mobility and inhomogeneity at low water content. The swelling rate gradually slowed down after 4–5 h. CMC and HEC gels reached equilibrium after 24 h, while HPC and MC gels required longer immersion times. Gels showed second-order swelling kinetics in water. The mechanism of the water diffusion proved to be anomalous. In pure water, CMC gels showed the highest, while HPC and MC gels the lowest water uptake. The derivatives had different sensitivities to ionic strength in the swelling solution. The salt type also proved to be a significant factor at uniform ionic strength. Thus different cellulose derivative based gels may be preferred at various applications depending on the environment.     

Effect of an anionic surfactant on the complexation of some nonionic polymers with iodine in aqueous media

Complexation of some water soluble nonionic polymers, namely, polyvinylalcohol (PVA), polyvinylpyrrolidone (PVP), and hydroxypropyl cellulose (HPC), with iodine has been studied in aqueous and aqueous sodiumdodecylsulfate (SDS) solution. While the complexation was indicated by a red shift of the tri-iodide band in case of PVP or HPC, the PVA-iodine complex showed its characteristic band around 500 nm. It was observed for the first time that presence of SDS led to complete break down of the PVA-iodine complex and its characteristic blue color. The presence of monomers of SDS, however, appeared to favor the formation of the iodine complex with PVP or HPC. Addition of n-propanol, which is known to prevent the formation of gels or microgels in polymer solutions, was found to enhance the polymer-iodine complex. Gels of pure HPC and HPC with iodine both in presence and absence of SDS have been prepared and studied.     

Liquid crystal-forming aqueous hydroxypropyl cellulose solutions: Effects of surfactants on the turbidity and shear viscosity

The effects of type and concentration of surfactant on the turbidity and viscometric behavior for dilute and concentrated aqueous hydroxypropyl cellulose (HPC) solutions were examined. Two anionic surfactants, sodium dodecyl benzene sulfonate (SDBS) and sodium dodecyl sulfate (SDS), caused the cloud point of the dilute system to increase, but a nonionic and two cationic surfactants did not do so markedly. The transmittance for the dilute system increased with surfactant. The transmittance and viscometric behavior for the concentrated system were strongly dependent on the phase of the system: In the single-phase (isotropic and anisotropic), the transmittance and viscosity increased with SDBS, but, in the biphasic region, the behaviors were not as simple. An attempt was made to explain the transmittance and viscometric behavior in the single-phase on the basis of the change in apparent molecular weight and in order of HPC molecules. The phase transformation appeared to become less sensitive to temperature with SDBS. © 1993 John Wiley & Sons, Inc.     

Phase behavior and structure of liquid crystalline solutions of cellulose derivatives

Summary Structural and thermodynamic characteristics of liquid-crystalline solutions of four cellulose derivatives in a range of solvents were studied. Basic observations were made on these systems using polarized light microscopy, small angle light scattering, dilute solution and concentrated solution viscosities. The polymers studied include hydroxypropyl cellulose (HPC), cellulose acetate butyrate (CAB), ethyl cellulose (EC), and cellulose triacetate (CT). The formation of the liquid crystalline phase was shown to strongly depend on polymer concentration, solvent type and temperature. The critical volume fraction of polymer required to form the liquid crystal phase varied significantly as the solvent changed. The critical volume fraction decreased with increasing solvent acidity and polymer intrinsic viscosity in a given solvent. The breadth of the two phase region seems to decrease with increasing acidity. The liquid crystalline phase was in most cases determined to be cholesteric. In all cases positively birefringent cellulose derivatives form negative spherulitic domains. In one case, the negativity birefringent system (cellulose triacetate) formed positively birefringent spherulitic liquid crystalline domains. This is interpreted to mean the structure organizes itself by a tangential alignment of polymer chains within the domain. SALS measurements appear to detect domains and in some cases cholesteristic pitch.With 5 figures and 4 tables     

Effect of SDS on the gelation of hydroxypropylmethylcellulose hydrogels

Thermal behavior of aqueous hydroxypropylmethylcellulose (HPMC)/surfactant mixtures was studied in the dilute concentration regime using micro-differential scanning calorimetry (DSC). The surfactant used was sodium n-dodecyl sulfate (SDS). The heat capacity of HPMC gel with various concentrations of SDS was much higher than that of the pure HPMC gel. The addition of SDS at different concentrations showed dissimilar influences on the gelation of HPMC; SDS at lower concentrations (≤6 mM) did not affect gelation temperature significantly except for enhancing the heat capacity whilst SDS at higher concentrations (≥6 mM) not only resulted in the gelation of HPMC at higher temperatures but also changed the pattern of the gelation thermograph from a single mode to a bimodal. On the basis of the observed thermal behavior of HPMC/SDS systems, the mechanism behind the sol-gel transition was discussed in terms of the properties of the surfactant and their influences on the extent of polymer/surfactant binding and polymer/polymer hydrophobic association. Gelation kinetics was analysed using the results from the DSC measurements. The kinetic parameters were determined.     

Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.     

Laser light scattering and isothermal titration calorimetric studies of poly(ethylene oxide) aqueous solution in presence of sodium dodecyl sulfate

The aqueous solution of poly(ethylene oxide) (PEO) in the presence of different concentrations of sodium dodecyl sulfate (SDS) was examined by laser light scattering and isothermal titration calorimetric techniques. A small fraction of PEO aggregates were found to coexist with unimeric PEO chains in dilute solution. The presence of monovalent salt does not alter the hydrodynamic properties of PEO in aqueous solution. Addition of a monovalent anionic surfactant, such as SDS, induces cooperative binding of surfactant monomers to PEO backbones at SDS concentrations ranging from 4.0 mM (critical aggregation concentration) to 16.5 mM (saturation concentration). The hydrodynamic radius of PEO unimers decreases initially and then increases with SDS concentration, resulting from the structural reorganization of the PEO/SDS complex. Beyond the saturation concentration, the hydrodynamic radii of PEO/SDS complex are independent of SDS concentration.     

Laser flash photolysis and time-resolved fluorescence measurements of the aggregation number of SDS-biopolymer complexes

Aqueous solutions of 0.5% sodium carboxymethyl cellulose, NaCMC, and 2-hydroxyethyl cellulose, HEC, and variable concentration of sodium dodecyl sulfate, SDS, were studied by the intensities ratio of pyrene fluorescence bands (I/III and monomer/excimer) and conductance measurements to determine the critical aggregation concentration, cac, and the degree of micellar dissociation, alpha, respectively. The cac of these systems is close to 2-4 x 10(-3)M and values of alpha are consistent with the formation of SDS micelles adsorbed cooperatively to the polymer backbone. Laser flash photolysis (LFP) and time-resolved fluorescence (TRF) techniques were employed to determine the micellar aggregation number, N, using the probes flavone and pyrene, respectively. The obtained N for HEC/SDS and NaCMC/SDS were 48 and 68, respectively. The presence of the counterions at the NaCMC backbone is the main factor responsible for this number. Besides, the transient spectra of flavone and present in 0.5% HEC or NaCMC with and in absence of SDS are discussed. Flavone triplet state exit rate constant from the biopolymer/SDS complexes showed that these systems are completely different from a pure SDS micelle.     

Structural investigations of polymer liquid-crystalline solutions: Aromatic polyamides,hydroxy propyl cellulose,and poly(γ-benzyl-L-glutamate)

A comparative structural investigation of the characteristics of polymer liquid-crystalline solutions including Kevlar® (PPD-T)/sulfuric acid, poly(Cl-p-phenylene terephthalamide) (Cl-PPD-T)/sulfuric acid, poly(γ-benzyl-L-glutamate) (PγBLG)/dioxane, and hydroxypropyl cellulose (HPC)/water was undertaken. Experimental procedures included polarized light microscopy, light scattering, absorption spectra, and x-ray diffraction on solutions at various concentrations and temperatures. Both the two-phase region at the onset of liquid-crystal formation and the wholly anisotropic phase were investigated. Each solution exhibited distinctive characteristics. The PPD-T and Cl-PPD-T solutions were nematic, and the PγBLG and HPC solutions were cholesteric. In the two-phase region the PPD-T, Cl-PPD-T, and PγBLG (but apparently not the HPC) exhibited negatively birefringent spherulites and aggregates of spherulites. The HPC solutions only exhibited spherulitic structures in the single-phase anisotropic system. The structures and orientations in the anisotropic phase for the various polymer solutions is considered. The helicoidal structural characteristics of the PγBLG and HPC solutions are contrasted.     

Interaction between ethyl(hydroxyethyl)cellulose and sodium dodecyl sulphate in aqueous solution

Using sodium activity, viscosity, and cloudpoint measurements, it has been shown that sodium dodecyl sulphate (SDS) binds to ethyl(hydroxyethyl)cellulose in a cooperative manner. In the absence of salt the binding leads to an increase in the clouding temperature, but when a small amount of salt (0.01 molal) is present first a drastic decrease and then an equally drastic increase in the cloud point temperature is observed. The binding of SDS also initially leads to an increase in viscosity followed by a decreased viscosity at higher SDS concentrations. A molecular mechanism explaining the observed behavior is given.     

The structures of complexes between polyethylene imine and sodium dodecyl sulfate in D2O: a scattering study

The association between a highly branched polyelectrolyte with ionizable groups, polyethylene imine (PEI), and an anionic surfactant, sodium dodecyl sulfate (SDS), has been investigated at two pH values, using small-angle neutron and light scattering. The scattering data allow us to obtain a detailed picture of the association structures formed. Small-angle neutron scattering (SANS) measurements in solutions containing highly charged PEI at low pH and low SDS concentrations indicate the presence of disklike aggregates. The aggregates change to a more complex three-dimensional structure with increasing surfactant concentration. One pronounced feature in the scattering curves is the presence of a Bragg-like peak at high q-values observed at a surfactant concentration of 4.2 mM and above. This scattering feature is attributed to the formation of a common well-ordered PEI/SDS structure, in analogue to what has been reported for other polyelectrolyte-surfactant systems. Precipitation occurred at the charge neutralization point, and X-ray diffraction measurements on the precipitate confirmed the existence of an ordered structure within the PEI/SDS aggregates, which was identified as a lamellar internal organization. Polyethylene imine has a low charge density in alkaline solutions. At pH 10.1 and under conditions where the surfactant was contrast matched, the SANS scattering curves showed only small changes with increasing surfactant concentration. This suggests that the polymer acts as a template onto which the surfactant molecules aggregate. Data from both static light scattering and SANS recorded under conditions where SDS and to a lower degree PEI contribute to the scattering were found to be consistent with a structure of stacked elliptic bilayers. These structures increased in size and became more compact as the surfactant concentration was increased up to the charge neutralization point.     

Hydrogen bonding interactions between adsorbed polymer molecules and crystal surface of acetaminophen

The objective of this work was to investigate whether or not the hydrogen bonding interaction between polymer and crystal surface can be detected by the etching pattern changes in the presence of polymers. The (010) face of acetaminophen single crystal was used as a model solid surface. The etching patterns on the (010) face of acetaminophen crystal by water are in the directions of a- and c-axes, which are the same as the directions of the dominant attachment energies on the (010) face. In the presence of polymer, the hydrogen bonding interactions between adsorbed polymer and crystal surface can affect surface diffusion of acetaminophen molecules and change the etching patterns in the direction of a-axis, i.e., the direction of one hydrogen bond chain. Studies with 2-hydroxyethyl cellulose (HEC), hydroxypropyl cellulose (HPC), hydroxypropyl methylcellulose (HPMC) and poly(vinyl alcohol) (PVA) showed that polymers, which can form hydrogen bonds with acetaminophen crystal surface, can change etching patterns in the direction of a-axis. Study with Dextran suggested that if a polymer cannot form hydrogen bonds with crystal surface due to steric repulsion, it will not change the etching pattern in the direction of a-axis. Studies with poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG) further confirmed that only if a polymer can form hydrogen bonds with acetaminophen on crystal surface, the etching patterns in the direction of a-axis will be affected. The study results suggest that in the presence of polymers, the etching pattern change in the direction of hydrogen bond chain, the a-axis of acetaminophen crystals, can be used to indicate the existence of the hydrogen bonding interactions between adsorbed polymers and acetaminophen crystal surface.     

Synergistic effects of polymers and surfactants on depletion forces

This work investigates the synergistic effects of a neutral polymer and an anionic surfactant on depletion forces as a function of bulk polymer and bulk surfactant concentration. In this work, we measure the force between a silica particle and a silica plate in aqueous solutions of the polymer and the surfactant using atomic force microscopy. The polymer is the triblock copolymer poly(ethylene oxide-block-propylene oxide-block-ethylene oxide) (Pluronic F108), and the surfactant is sodium dodecyl sulfate (SDS). In F108-only solutions, the force between the silica particle and the silica plate is primarily repulsive for polymer concentrations ranging from 200 to 10 000 ppm. In SDS-only solutions, the net force between the silica surfaces is repulsive at all separations for concentrations below 16 mM SDS and is attractive with a structural force character above 16 mM SDS. When both F108 and SDS are present in the solution, a net attractive force is observed at SDS concentrations as low as 4 mM, a factor of 2 below the critical micelle concentration (cmc). We attribute this synergistic effect to the complexation of F108 with SDS in bulk solution at a critical aggregation concentration (cac) that is less than the cmc, producing a relatively large, charged complex that creates a significant depletion force between the particle and plate.     

Determination of molecular parameters of hydroxyethyl and hydroxypropyl celluloses by chromatography with dual detection

Hydroxyethylcellulose (HEC) and hydroxypropylcellulose (HPC) were studied by means of size exclusion chromatography with dual detection, i.e. employing simultaneously a refractive index (concentration sensitive) and a multiangle light scattering (molecular weight sensitive) detectors. The eluent was water and water solutions containing different concentrations of ionic salts. Molecular weight distributions and averages, coefficients of the scaling law of molecular dimensions and unperturbed dimensions were thus obtained from a single polydisperse sample of each polymer. Measurements were performed at 25 degrees C and the anomalous chromatographic behaviour, due to a combination of ion and size exclusion mechanisms, found when using pure water as eluent is transformed into a size exclusion mechanism by the addition of ionic salts. However, the two polymers behave on a different way in presence of salts. Thus, HEC, which is of low degree of substitution (DS), is close to theta conditions in the aqueous salt solutions (i.e. the q exponent of the scaling law has a value close to 0.5), whereas in the case of HPC the addition of salt improves the quality of the solvent up to a value of q around 0.6. Unperturbed dimensions are also calculated for both celluloses.     

Adsorption of SDS and PEG on calcium fluoride studied by sum frequency generation vibrational spectroscopy

The adsorption of sodium dodecyl sulfate (SDS) from aqueous solution onto a calcium fluoride substrate (CaF(2)), in the presence of polyethylene glycol (PEG) of different molecular weights, has been investigated using the interface specific nonlinear optical technique of sum frequency generation (SFG) vibrational spectroscopy. Spectra of adsorbed SDS (in the C-H stretching region) were recorded at the surface of a CaF(2) prism in contact with SDS solutions at concentrations up to the cmc (8 mM) of the pure surfactant and in contact with binary solutions containing SDS and PEG with molecular weights from 400 to 12 000. In contrast with SFG spectra from the same combinations of surfactant and polymer on a hydrophobic surface, there was no evidence of spectra arising from the actual polymer adsorbed on CaF(2) at any polymer molecular weight either in the absence or presence of surfactant. However, there was indirect evidence for the presence of adsorbed polymer from changes in the SDS SFG spectra in the presence of polymer compared with spectra when the polymer was absent. The SFG spectra of SDS at 0.8 mM were closely similar to each other at all polymer molecular weights and different from the spectra in the absence of the polymer. The spectral differences between the polymer present and polymer absent was much smaller when the solution concentration of surfactant was 8 mM.     

Influence of counterion on the interaction of dodecyl sulfates and cellulose ethers

Fluorescence probe techniques together with microcalorimetry and dye solubilization were used to study the interaction between nonionic polymers and anionic surfactants with different monovalent counterions in order to examine the effects of the counterion. The polymers used were the cellulose ethers hydroxypropyl methyl cellulose (HPMC) and ethyl hydroxyethyl cellulose (EHEC). The surfactants were dodecyl sulfates with potassium, sodium, and lithium as counterions (KDS, NaDS, LiDS). The counterion influenced the interaction start concentration as well as the nature of the mixed aggregates formed. The interaction start, according to surfactant concentration, was found to be in the order KDS < NaDS < LiDS for both polymers as well as in aqueous solution. From fluorescence measurements it was found that the KDS-polymer aggregates shield pyrene from water better than the other surfactants, indicating larger aggregates with a more fluid interior. The microcalorimetry measurements confirm that the adsorption of the surfactants onto the polymer is endothermic and entropy driven at the start and as more clusters are formed on the polymer chains the process converts to being exothermic and driven by both enthalpy and entropy.     

Application of size exclusion chromatography with surfactant eluent to the study of polymer–surfactant interactions: oligomeric and micellar chromatographic effects

Complexation of sodium dodecyl sulphate (SDS) with a wide range of molecular weights of poly(ethylene glycol) (PEG) and poly(ethylene oxide) (PEO) has been studied by size exclusion chromatography using aqueous SDS eluent. A multi-angle laser light scattering detector and a differential refractometer were applied to give direct measurement of the molecular weight of complexes without reference to elution volume, since the latter is not a reliable indicator of the complex size. Background light scattering from micellar eluents hampered quantitative size measurements, but was minimal in sub-micellar eluent, where saturated binding was observed for polymers larger than 1000 g mol⁻¹. Multiple peaks and voids were observed in the elution profiles of low molecular weight polymers (up to a mass of 600 g mol⁻¹) in eluent at micellar concentrations. Several sources contribute to this behavior, including micellar chromatographic separation of the PEG oligomers due to their different distribution coefficients between the micellar and water phases. Preliminary results are reported for distribution coefficients of individual oligomers in a 600 g mol⁻¹ PEG sample. Three distinct binding behaviors are observed with increasing degree of polymerization of PEG: no interaction for small glycols, equilibrium partitioning of intermediate oligomers in and out of micelles, and binding of micelles to the larger polymers.