Preparation of Phosphinated Polymer‐Incarcerated Palladium and Its Application to C?N and C?C Bond‐Forming Reactions

Phosphinated polymer‐incarcerated (PI) Pd catalysts were prepared by immobilization of palladium with phosphinated polymers by using the PI method. The phosphinated PI Pd catalysts showed good catalytic activity without externally added phosphine ligands in the amination of aryl halides for C N bond‐forming reactions, as well as in Suzuki–Miyaura and Sonogashira coupling. No leaching of palladium from the immobilized Pd was observed by fluorescence X‐ray analysis. Furthermore, it was found that immobilization of Pd by the PI process facilitated the suppression of poisoning of the metal by amines. These effects can be ascribed to stabilization of the catalyst by both the phosphine moieties and the benzene rings in the swollen polymer support. The phosphinated PI Pd catalysts could also be recovered by simple filtration and reused several times without leaching of palladium in both the amination and Suzuki–Miyaura coupling reactions.     

Recoverable, reusable, highly active, and sulfur-tolerant polymer incarcerated palladium for hydrogenation

A new type of immobilized palladium, PI (polymer incarcerated) Pd (2b), from Pd(PPh(3))(4) and copolymer (1b) has been developed. The excellent activity of PI Pd has been demonstrated in hydrogenation of various olefins, benzyl ethers, and nitro and aromatic compounds. PI Pd is tolerant under high pressure and high temperature and can be recovered and reused several times without loss of activity even under harsh conditions. Moreover, PI Pd is highly resistant to poisoning by sulfur.     

Ionic liquid-containing polyethylene supported palladium: a green,highly efficient and stable catalyst for Suzuki reaction

The Suzuki coupling was carried out using a new, efficient and reusable polymer-supported Pd/IL catalyst (PEt@IL/Pd) under aqueous conditions. This catalyst was prepared through coacervation approach followed by treatment with Pd(OAc)₂. The FT-IR, SEM, TGA, TEM, XPS, ICP and EDX techniques were employed to characterize the PEt@IL/Pd. This catalyst exhibited high activity in the Suzuki coupling reaction under green conditions. Moreover, the catalyst could be recycled and reapplied for six times with no appreciable loss in its activity. The leaching test also showed high stability of catalytic Pd species under applied conditions.     

The polymer incarcerated method for the preparation of highly active heterogeneous palladium catalysts

A new method named "the polymer incarcerated (PI) method" for preparing a heterogeneous palladium catalyst has been developed. The method is operationally simple, and the Pd catalyst prepared (PI Pd) is highly active for hydrogenation, carbon-carbon, and carbon-oxygen bond-forming reactions. Remarkable points are that the activity of PI Pd is higher than that of homogeneous Pd catalysts and that PI Pd is recovered by simple filtration and reused several times without loss of activity. The catalyst is expected to replace many heterogeneous palladium catalysts, especially Pd/C, which is often used in academia and industry, but recovery of which is difficult.     

Dendrimer-encapsulated Pd nanoparticles as aqueous, room-temperature catalysts for the Stille reaction

We report that dendrimer-encapsulated Pd nanoparticles having a diameter of approximately 1.7 nm are effective and general catalysts for coupling aryl halides to organostannanes (the Stille reaction) under mild conditions. The significant results of this study are that the Stille reaction is catalyzed by dendrimer-encapsulated Pd nanoparticles in very good yield, in aqueous solution at 23 degrees C, and using only 0.100 atom % of Pd as catalyst.     

9-fluorenylphosphines for the Pd-catalyzed sonogashira, suzuki, and Buchwald-Hartwig coupling reactions in organic solvents and water

The lithiation/alkylation of fluorene leads to various 9-alkyl-fluorenes (alkyl=Me, Et, iPr, -Pr, -C18H25) in>95% yields, for which lithiation and reaction with R2PCl (R=Cy, iPr, tBu) generates 9-alkyl, 9-PR2-fluorenes which constitute electron-rich and bulky phosphine ligands. The in-situ-formed palladium-phosphine complexes ([Na2PdCl4], phosphonium salt, base, substrates) were tested in the Sonogashira, Suzuki, and Buchwald-Hartwig reactions of aryl chlorides and aryl bromides in organic solvents. The Sonogashira coupling of aryl chlorides at 100-120 degrees C leads to>90% yields with 1 mol% of Pd catalyst. The Suzuki coupling of aryl chlorides typically requires 0.05 mol% of Pd catalyst at 100 degrees C in dioxane for quantitative product formation. To carry out "green" cross-coupling reactions in water, 9-ethylfluorenyldicyclohexylphosphine was reacted in sulphuric acid to generate the respective 2-sulfonated phosphonium salt. The Suzuki coupling of activated aryl chlorides by using this water-soluble catalyst requires only 0.01 mol% of Pd catalyst, while a wide range of aryl chlorides can be quantitatively converted into the respective coupling products by using 0.1-0.5 mol% of catalyst in pure water at 100 degrees C. Difficult substrate combinations, such as naphthylboronic acid or 3-pyridylboronic acid and aryl chlorides are coupled at 100 degrees C by using 0.1-0.5 mol% of catalyst in pure water to obtain the respective N-heterocycles in quantitative yields. The copper-free aqueous Sonogashira coupling of aryl bromides generates the respective tolane derivatives in>95% yield.     

A simple,quick and novel protocol for biaryl synthesis using LiCl‐promoted in situ‐generated Pd nanoparticles

This paper describes a simple and a very quick protocol for biaryl synthesis using the Suzuki–Miyaura cross‐coupling reaction. A quintessential role of salting‐out agent LiCl was observed in the Suzuki–Miyaura cross‐coupling reaction that enhanced the reduction rate of Pd (II) to a considerable extent, resulting in the formation of nanosized palladium in a few seconds. The isolated Pd nanoparticles were characterized with X‐ray diffraction, dynamic light scattering, TGA, transmission electron microscopy and scanning electron microscopy‐dispersive X‐ray spectroscopy. The Suzuki–Miyaura cross‐coupling reaction proceeded very well with the in situ‐generated Pd nanocatalysts furnishing the desired biaryl adducts with excellent yields.     

Palladium(0)-catalyzed amination,Stille coupling,and Suzuki coupling of electron-deficient aryl fluorides

The amination of 2-fluoronitrobenzene was Pd(0) catalyzed at 65 degrees C in DMF, and the effectiveness of the catalysis was ligand-dependent. Among the five catalyst systems investigated, Pd(PPh3)4 was the most effective catalyst. The control experiments revealed that Pd(OAc)2 or PPh3 was not responsible for the catalysis. 4-Fluoro-3-nitro-benzonitrile and 4-fluoro-3-nitro-benzaldehyde also underwent Stille coupling and Suzuki coupling in the presence of Pd(PPh3)4, and the reactions afforded the coupling products in 28-86% yields. The control experiments showed no sign of reaction in the absence of palladium. These results were in agreement with the oxidative addition/reductive elimination pathway, where the oxidative addition could conceivably proceed via the SNAr mechanism.     

Immobilization of palladium in mesoporous silica matrix: preparation, characterization, and its catalytic efficacy in carbon-carbon coupling reactions

Palladium(0) has been immobilized into the silica-based mesoporous material to develop catalyst Pd(0)-MCM-41, which is found to be highly active in carbon-carbon coupling reactions. [Pd(NH3)4]2+ ions have been incorporated into the mesoporous material during synthesis of MCM-41 and subsequently upon treatments with hydrazine hydrate Pd2+ ions present in mesoporous silica matrix were reduced to Pd(0) almost instantaneously. The catalyst has been characterized by small-angle X-ray diffraction, N2 sorption, and transmission electron microscopy (TEM). TEM and surface area measurements clearly demonstrate that the immobilization of Pd(0) into the mesoporous silica has a significant effect on pore structure of the catalyst. Nevertheless, after immobilization of palladium the meso-porosity of the material is retained, as evidenced in the nitrogen sorption measurement. The TEM micrograph shows that both MCM-41 and Pd(0)-MCM-41 have similar types of external surface morphology; however, Pd(0)-MCM-41 was less ordered. Pd(0)-MCM-41 showed high catalytic activity toward carbon-carbon bond formation reactions like Heck and Sonogashira coupling, as evidenced in high turn-over numbers. In contrast to many other Pd-based catalysts reported so far, Pd(0)-MCM-41 acts as a truly heterogeneous catalyst in C-C coupling reactions. Notably, the new heterogeneous catalyst is found to be efficient in the activation of arylchloride to give impressive conversion in cross coupling (15-45% for Heck and 30% for Sonogashira) reactions under mild conditions.     

CeO2负载的Cu, Ir和Pd催化剂上的醇转移脱氢反应

 研究了CeO2负载的Cu, Ir和Pd催化剂上的醇转移脱氢反应. 利用催化剂体系脱氢和加氢功能的偶合,在较温和的反应条件下实现了二级脂肪醇的高选择性转移脱氢. 其中, Ir/CeO2催化剂表现出较高的催化活性,其TOF值达16.0 h-1.     

Rigid pi-conjugated mono-, bis-, and tris(2,2':6',2' '-terpyridines)

A set of rigid, pi-conjugated linear mono- and bisterpyridines and star-shaped tristerpyridines have been synthesized using Pd(0)-catalyzed coupling reactions and the Horner-Wadsworth-Emmons reaction. The terpyridyl ligands obtained feature strong emission in the blue range with high quantum yields in dilute solution and thin films.     

Tandem one-Pot palladium-catalyzed reductive and oxidative coupling of benzene and chlorobenzene

The in situ combination of oxidative coupling of benzene to biphenyl and reductive coupling of chlorobenzene (also to biphenyl) using palladium catalysts (Pd(2+)/Pd(0)) is described. In each cycle, the reductive process regenerates the catalyst for the oxidative process and vice versa. Kinetic investigations show that the reaction rate depends on [C(6)H(6)], [C(6)H(6)Cl], and catalyst loading, with E(a)() = 13 kcal mol(-)(1). The reduced palladium catalyst undergoes deactivation through aggregation and precipitation, but it is observed that during this deactivation process the Pd(0) becomes an active catalyst for the reductive coupling of chlorobenzene. Accordingly, while Pd(0)/C particles are inactive, Pd(0) colloids do catalyze the tandem reaction. Conversion is increased in the presence of a phase-transfer catalyst, presumably due to stabilization of the active Pd(0) clusters. The two halves of the catalytic cycle are examined in the light of previous research, regarding analogous oxidative and reductive coupling reactions, using stoichiometric amounts of PdCl(2) and Pd(0), respectively. The roles of homogeneous PdCl(2) and Pd(0) clusters are discussed.     

Synthesis,Structures, and Near‐IR Absorption of Heterole‐Fused Earring Porphyrins

A reaction sequence of regioselective peripheral bromination, Suzuki–Miyaura coupling with 2‐borylated thiophene or pyrrole, and oxidative ring‐closure with FeCl₃ allowed the synthesis of heterole‐fused earring porphyrins 4Pd and 9Pd from the parent earring porphyrin 1 . Differently pyrrole‐fused porphyrins 5H and 6H and their Pd^II complexes 5Pd and 6Pd were also synthesized. The structures of 4Pd , 5H, 6Pd , and 8Pd have been revealed by X‐ray analysis to be slightly twisted owing to constraints imposed by heterole‐fused structures. 5Pd exhibits an intensified band at 1505 nm, while 4Pd and 9Pd display small but remarkably red‐shifted absorption bands reaching around 2200 nm.     

Synthesis,Structures, and Near‐IR Absorption of Heterole‐Fused Earring Porphyrins

A reaction sequence of regioselective peripheral bromination, Suzuki–Miyaura coupling with 2‐borylated thiophene or pyrrole, and oxidative ring‐closure with FeCl₃ allowed the synthesis of heterole‐fused earring porphyrins 4Pd and 9Pd from the parent earring porphyrin 1 . Differently pyrrole‐fused porphyrins 5H and 6H and their Pd^II complexes 5Pd and 6Pd were also synthesized. The structures of 4Pd , 5H, 6Pd , and 8Pd have been revealed by X‐ray analysis to be slightly twisted owing to constraints imposed by heterole‐fused structures. 5Pd exhibits an intensified band at 1505 nm, while 4Pd and 9Pd display small but remarkably red‐shifted absorption bands reaching around 2200 nm.     

DFT calculations of EPR parameters in an ionic lattice of [M(CN)4](3-) (M = Ni, Pd, Fe, Ru, Os) complexes

The electronic g-tensor and hyperfine coupling constants were calculated for cyanide coordination complexes [M(CN)4]3- (M = Ni, Pd, Fe, Ru, Os) in KCl or NaCl host lattices through an embedded calculation approach using the Density Functional Theory and compared with previous experiments. For all tested complexes, the B3LYP functional is in good agreement with the experiments for the hyperfine coupling constants. For the electronic g-tensor calculations, performed using the coupled perturbed SCF theory, some discrepancies were found, and the best agreements with the experimental values were achieved by the B3LYP functional.     

Practical preparation method of polymer-incarcerated (PI) palladium catalysts using Pd(II) salts

[reaction: see text]. Polymer-incarcerated (PI) palladium catalyst was practically prepared from inexpensive Pd(II) salts and a polystyrene-based copolymer under reducing conditions. Remarkable effects of alkali metal salts on the palladium loading were observed. PI Pd thus prepared showed high catalytic activity in Mizoroki-Heck reactions and Suzuki-Miyaura couplings with a range of substrates including an aryl chloride. In all cases, the Pd catalyst was recovered quantitatively without leaching, and reused several times without significant loss of activity.     

Heterogeneous Pd/C-catalyzed ligand-free, room-temperature Suzuki-Miyaura coupling reactions in aqueous media

A mild and efficient ligand-free Suzuki-Miyaura coupling reaction catalyzed by heterogeneous Pd/C was developed. Aryl bromides and triflates undergo the cross-coupling with aryl boronic acids in excellent yields without the presence of any additives in aqueous media at room temperature. Aryl vinyl boronic acids are also applicable to this coupling reaction and provide the trans-stilbene derivatives in high yields. The application of wet-type Pd/C to the coupling reaction was achieved without any loss of activity under aerobic conditions, and the reuse of Pd/C is feasible for a fifth run without significant loss of activity. Inductively coupled plasma (ICP) mass-spectrometric analysis of the filtrate from the reaction mixture of 4-bromonitrobenzene with phenylboronic acid demonstrated that the palladium metal hardly leached into the solution within the limits of the detector (<1 ppm), thus suggesting that the present Suzuki-Miyaura reaction proceeded by heterogeneous catalysis.     

Immobilized Pd on a NHC functionalized metal–organic framework MIL-101(Cr): an efficient heterogeneous catalyst in Suzuki−Miyaura coupling reaction in water

A novel Pd−NHC functionalized metal–organic framework (MOF) based on MIL-101(Cr) was synthesized and used as an efficient heterogeneous catalyst in the C-C bond formation reactions. Using this heterogeneous Pd catalyst system, the Suzuki−Miyaura coupling reaction was accomplished well in water, and coupling products were obtained in good to excellent yields in short reaction time. The Pd−NHC−MIL-101(Cr) was characterized using some different techniques, including Fourier transform-infrared, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy, inductively coupled plasma and elemental analysis. The microscopic techniques showed the discrete octahedron structure of MIL-101(Cr), which is also stable after chemical modification process to prepare the catalyst system. The TEM images of the catalyst showed the existence of palladium nanoparticles immobilized in the structure of the catalyst, while no reducing agent was used. It seems that the NHC groups and imidazolium moieties in the structure of the MOF can reduce Pd (II) to Pd (0) species. This modified MOF substrate can also prevent aggregation of Pd nanoparticles, resulting in high stability of them in organic transformation. The Pd−NHC−MIL-101(Cr) catalyst system could be simply extracted from the reaction mixture, providing an efficient synthetic method for the synthesis of biaryls derivatives using the aforementioned coupling reaction. The Pd−NHC−MIL-101(Cr) catalyst could be recycled in this organic reaction with almost consistent catalytic efficiency.     

Inter- and intramolecular palladium-catalyzed allyl cross-coupling reactions using allylindium generated in situ from allyl acetates, indium, and indium trichloride

Inter- and intramolecular palladium-catalyzed allyl cross-coupling reactions using allylindium generated in situ by treatment of allyl acetates with indium and indium trichloride in the presence of Pd(0) catalyst and nBuNMe(2) in DMF were successfully demonstrated. Allylindium species generated in situ by reductive transmetalation of pi-allylpalladium(II) complexes, obtained from a variety of allyl acetates in the presence of Pd(0) catalyst together with indium and indium trichloride, were found to be capable of acting as effective nucleophilic coupling partners in Pd-catalyzed cross-coupling reactions. A variety of allyl acetates such as but-1-en-3-yl acetate, crotyl acetate, and 2-methylallyl acetate afforded the corresponding allylic compounds in good yields in cross-coupling reactions. Various electrophilic cross-coupling partners such as aryl iodides and vinyl bromides and triflates participate in these reactions. Not only intermolecular but also intramolecular Pd-catalyzed cross-coupling reactions work equally well to produce the desired allylic coupling products in good yields.     

Green chemical synthesis of Pd nanoparticles for use as efficient catalyst in Suzuki‐Miyaura cross‐coupling reaction

Herein, we report the synthesis of tiny spherical Pd nanoparticles (NPs) by green chemical method under ambient conditions using flower extract of Lantana camara plant. The size of the Pd NPs is tunable from 4.7 to 6.3 nm by systematically controlling the concentration of either metal ions or plant extract. The synthesized Pd NPs were well characterized by different spectroscopic, microscopic and diffractometric techniques. The Pd NPs offered good size‐dependent catalytic activity in the Suzuki‐Miyaura C‐C coupling reaction under mild reaction conditions in (1: 1) water‐ethanol mixture. The catalyst is stable and exhibited excellent reusability up to three cycles of coupling reaction after which the catalytic activity decreases.