脂肪醇聚氧乙烯醚的高温气相色谱法分析

 采用 SE-3 0键合甲基硅酮固定相涂铝石英高温毛细管色谱柱、程序升温、FID检测 ,较好地分离了各种合成及天然脂肪醇聚氧乙烯醚 (AEO)样品中的各组分 ;使用 GC-MS进行了样品中组分的定性 ,并经试验研究采用峰面积归一法进行了组分的定量 ,成功地测定了各种 AEO样品中游离脂肪醇质量分数及聚氧乙烯醚的环氧乙烷 (EO)加成数分布。方法简便、快速 ,有较好的准确度和精密度。     

窄分布脂肪醇聚氧乙烯醚的合成和研究

以天然脂肪醇为起始剂,在催化剂的作用下,进行乙氧基化反应,用气相色谱法分析了脂肪醇聚氧乙烯醚(AEO)产物的组成分布。研究结果表明,采用自制催化剂,可以得到分子量分布窄的脂肪醇聚氧乙烯醚。在120℃,0.1~0.3MPa的压力条件下,当环氧乙烷平均加和数为1.6时,聚合产物中残留脂肪醇为15.5%,AEO1-3的含量为76.2%。     

高效液相色谱质谱法分析脂肪醇聚氧乙烯醚中的碳数及环氧乙烷加成数的分布

应用高效液相色谱法将脂肪醇聚氧乙烯醚按碳数和环氧乙烷加成数 (EO数 )分离后 ,在线联用电喷雾离子化质谱 (ESI MS) ,根据其一系列准分子离子峰判断烷基链长和环氧乙烷聚合度。解释了准分子离子峰强度失真的原因。     

高效液相色谱质谱法分析脂肪醇聚氧乙烯醚中的碳数及环氧乙烷加成数的分布

 应用高效液相色谱法将脂肪醇聚氧乙烯醚按碳数和环氧乙烷加成数 (EO数 )分离后 ,在线联用电喷雾离子化质谱 (ESI MS) ,根据其一系列准分子离子峰判断烷基链长和环氧乙烷聚合度。解释了准分子离子峰强度失真的原因。     

环氧乙烷环氧丙烷共聚醚的研究进展

综述了环氧乙烷环氧丙烷共聚醚的聚合机理聚合工艺及其应用.环氧乙烷环氧丙烷共聚醚的聚合按其催化剂体系的机理可以分为阴离子聚合、阳离子聚合和配位聚合三类,其中阳离子聚合应用较少.在环氧乙烷和环氧丙烷开环聚合生成共聚醚的反应中,不同的反应工艺条件对生成的聚醚有着很大的影响.同样比例的环氧乙烷和环氧丙烷,因聚合反应器设计、反应器种类、起使剂种类催化剂种类与用量温度加料方式端基结构等的不同,所合成的共聚醚会产生不同的结构和性能.环氧乙烷环氧丙烷共聚形成的聚醚可以分为嵌段共聚醚和无规共聚醚两类.其中,嵌段共聚醚可以分为EPE和PEP两类.     

正十二烷醇与环氧乙烷的加成反应动力学研究──最佳反应时间的确定

正十二烷醇与环氧乙烷的加成反应动力学研究──最佳反应时间的确定张仁权,张维冰,李葵英,王万兴（齐齐哈尔轻工学院化工系,齐齐哈尔,１６１００６）关键词正十二烷醇聚氧乙烯醚,碱催化,聚合度在工业生产中脂肪醇与环氧乙烷的加成反应多采用ＫＯＨ和ＮａＯＨ等强碱...     

固体超强酸S2O8^2-/ZrO2-SiO2-Sm2O3催化合成溴代正辛烷的研究

溴代正辛烷是重要的有机精细化工产品中间体[1],主要用于合成脂肪醇聚氧乙烯醚,烷基酚聚氧乙烯醚和脂肪醇聚氧乙烯醚硫酸盐等表面活性剂;也是合成菌毒清的中间体.     

单斜与锐钛矿双晶相TiO2的水热法制备与机理探讨

以一种具有超强耐酸碱的表面活性剂-丁基封端脂肪醇聚氧乙烯醚作为晶型调节剂,利用钛酸丁酯和氢氧化钠的水热反应制备了双晶相(单斜相与锐钛矿相)TiO2,考察了丁基封端脂肪醇聚氧乙烯醚和钛酸丁酯的物质的量比R、反应时间、反应温度等因素对产物的晶相组成的影响,并对不同条件下的晶相转变机理进行了初步探讨。     

脂肪醇聚醚产品及脂肪醇羟值的快速测定

以4-二甲氨基吡啶为催化剂,过量乙酸酐为乙酰化试剂,吡啶为溶剂,用电位滴定法快速测定脂肪醇聚醚产品及脂肪醇羟值,并对催化剂、反应条件、系统的适应性进行了探讨。用该方法对5种不同羟值的脂肪醇聚醚及脂肪醇样品进行了测定,测定结果的相对标准偏差小于0.5%(n=6),且测定结果与国标法测定结果相符合,相对误差在±1%之内。     

热动力学的研究(Ⅵ)——环氧氯丙烷开环反应的热动力学

本文在前文所建立的热动力学方程和无量纲参数研究法的基础上,对较为复杂的环氧氯丙烷开环反应的研究,扩大了热动力学的研究范围。早在1929年,Bronsted等采用特殊的实验方法,对环氧乙烷及类似化合物进行了较为全面的研究,并测定了在盐酸溶液中,环氧乙烷等化合物可能发生的各种开环反应的速度常数。本文测定了环氧氯丙烷与碘化钾在磷酸盐缓冲液中的开环反应     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.