Facile Synthesis of a Furan–Arylamine Hole‐Transporting Material for High‐Efficiency,Mesoscopic Perovskite Solar Cells

A novel hole‐transporting molecule (F101) based on a furan core has been synthesized by means of a short, high‐yielding route. When used as the hole‐transporting material (HTM) in mesoporous methylammonium lead halide perovskite solar cells (PSCs) it produced better device performance than the current state‐of‐the‐art HTM 2,2′,7,7′‐tetrakis‐(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene (spiro‐OMeTAD). The F101‐HTM‐based device exhibited both slightly higher J_sc (19.63 vs. 18.41 mA cm^?2) and V_oc (1.1 vs. 1.05 V) resulting in a marginally higher power conversion efficiency (PCE) (13.1 vs. 13 %). The steady‐state and time‐resolved photoluminescence show that F101 has significant charge extraction ability. The simple molecular structure, short synthesis route with high yield and better performance in devices makes F101 an excellent candidate for replacing the expensive spiro‐OMeTAD as HTM in PSCs.     

3,4‐Phenylenedioxythiophene (PheDOT) Based Hole‐Transporting Materials for Perovskite Solar Cells

Two new electron‐rich molecules based on 3,4‐phenylenedioxythiophene (PheDOT) were synthesized and successfully adopted as hole‐transporting materials (HTMs) in perovskite solar cells (PSCs). X‐ray diffraction, absorption spectra, photoluminescence spectra, electrochemical properties, thermal stabilities, hole mobilities, conductivities, and photovoltaic parameters of PSCs based on these two HTMs were compared with each other. By introducing methoxy substituents into the main skeleton, the energy levels of PheDOT‐core HTM were tuned to match with the perovskite, and its hole mobility was also improved (1.33×10^?4 cm² V^?1 s^?1, being higher than that of spiro‐OMeTAD, 2.34×10^?5 cm² V^?1 s^?1). The PSC based on MeO‐PheDOT as HTM exhibits a short‐circuit current density (J_sc) of 18.31 mA cm^?2, an open‐circuit potential (V_oc) of 0.914 V, and a fill factor (FF) of 0.636, yielding an encouraging power conversion efficiency (PCE) of 10.64 % under AM 1.5G illumination. These results give some insight into how the molecular structures of HTMs affect their performances and pave the way for developing high‐efficiency and low‐cost HTMs for PSCs.     

Lowering Molecular Symmetry To Improve the Morphological Properties of the Hole‐Transport Layer for Stable Perovskite Solar Cells

Inspired by the structural feature of the classical hole‐transport material (HTM), Spiro‐OMeTAD, many analogues based on a highly symmetrical spiro‐core were reported for perovskite solar cells (PSCs). However, these HTMs were prone to crystallize because of the high molecular symmetry, forming non‐uniform films, unfavorable for the device stability and large‐area processing. By lowering the symmetry of spiro‐core, we report herein a novel spirobisindane‐based HTM, Spiro‐I, which could form amorphous films with high uniformity and morphological stability. Compared to the Spiro‐OMeTAD‐based PSCs, those containing Spiro‐I exhibit similar efficiencies for small area but higher ones for large area (1 cm²), and especially much higher air stability (retaining 80 % of initial PCE after 2400 h storage without encapsulation). Moreover, the Spiro‐I can be synthesized from a cheap starting material bisphenol A and used with a small amount for the device fabrication.     

Inexpensive Hole‐Transporting Materials Derived from Tröger's Base Afford Efficient and Stable Perovskite Solar Cells

The synthesis of three enamine hole‐transporting materials (HTMs) based on Tröger's base scaffold are reported. These compounds are obtained in a three‐step facile synthesis from commercially available materials without the need of expensive catalysts, inert conditions or time‐consuming purification steps. The best performing material, HTM3, demonstrated 18.62 % PCE in PSCs, rivaling spiro‐OMeTAD in efficiency, and showing markedly superior long‐term stability in non‐encapsulated devices. In dopant‐free PSCs, HTM3 outperformed spiro‐OMeTAD by a factror of 1.6. The high glass‐transition temperature (T_g=176 °C) of HTM3 also suggests promising perspectives in device applications.     

Non‐Planar and Flexible Hole‐Transporting Materials from Bis‐Xanthene and Bis‐Thioxanthene Units for Perovskite Solar Cells

Two new hole‐transporting materials (HTMs), BX‐OMeTAD and BTX‐OMeTAD , based on xanthene and thioxanthene units, respectively, and bearing p‐methoxydiphenylamine peripheral groups, are presented for their use in perovskite solar cells (PSCs). The novelty of the newly designed molecules relies on the use of a single carbon‐carbon bond ‘C?C’ as a linker between the two functionalized heterocycles, which increases the flexibility of the molecule compared with the more rigid structure of the widely used HTM spiro‐OMeTAD. The new HTMs display a limited absorbance in the visible region, due to the lack of conjugation between the two molecular halves, and the chemical design used has a remarkably impact on the thermal properties when compared to spiro‐OMeTAD. BX‐OMeTAD and BTX‐OMeTAD have been tested in ([(FAPbI₃)_0.87(MAPbBr₃)_0.13]_0.92[CsPbI₃]_0.08)‐based PSC devices exhibiting power conversion efficiencies of 14.19 and 16.55 %, respectively. The efficiencies reached, although lower than those measured for spiro‐OMeTAD (19.63 %), are good enough to consider the chemical strategy used as an interesting via to design HTMs for PSCs.     

A Two‐Dimensional Hole‐Transporting Material for High‐Performance Perovskite Solar Cells with 20 % Average Efficiency

A readily available small molecular hole‐transporting material (HTM), OMe‐TATPyr, was synthesized and tested in perovskite solar cells (PSCs). OMe‐TATPyr is a two‐dimensional π‐conjugated molecule with a pyrene core and four phenyl‐thiophene bridged triarylamine groups. It can be readily synthesized in gram scale with a low lab cost of around US$ 50 g^?1. The incorporation of the phenyl‐thiophene units in OMe‐TATPyr are beneficial for not only carrier transportation through improved charge delocalization and intermolecular stacking, but also potential trap passivation via Pb–S interaction as supported by depth‐profiling XPS, photoluminescence, and electrochemical impedance analysis. As a result, an impressive best power conversion efficiency (PCE) of up to 20.6 % and an average PCE of 20.0 % with good stability has been achieved for mixed‐cation PSCs with OMe‐TATPyr with an area of 0.09 cm². A device with an area of 1.08 cm² based on OMe‐TATPyr demonstrates a PCE of 17.3 %.     

Dopant‐Free Squaraine‐Based Polymeric Hole‐Transporting Materials with Comprehensive Passivation Effects for Efficient All‐Inorganic Perovskite Solar Cells

Development of high‐performance dopant‐free hole‐transporting materials (HTMs) with comprehensive passivation effects is highly desirable for all‐inorganic perovskite solar cells (PVSCs). Squaraines (SQs) could be a candidate for dopant‐free HTMs as they are natural passivators for perovskites. One major limitation of SQs is their relatively low hole mobility. Herein we demonstrate that polymerizing SQs into pseudo two dimensional (2D) p–π conjugated polymers could overcome this problem. By rationally using N,N‐diarylanilinosquaraines as the comonomers, the resulting polysquaraine HTMs not only exhibit suitable energy levels and efficient passivation effects, but also achieve very high hole mobility close to 0.01 cm^?2 V^?1 s^?1. Thus as dopant‐free HTMs for α‐CsPbI₂Br‐based all‐inorganic PVSCs, the best PCE reached is 15.5 %, outperforming those of the doped‐Spiro‐OMeTAD (14.4 %) based control devices and among the best for all‐inorganic PVSCs.     

Self‐Assembly of Hybrid Oxidant POM@Cu‐BTC for Enhanced Efficiency and Long‐Term Stability of Perovskite Solar Cells

The controllable oxidation of spiro‐OMeTAD and improving the stability of hole‐transport materials (HTMs) layer are crucial for good performance and stability of perovskite solar cells (PSCs). Herein, we report an efficient hybrid polyoxometalate@metal–organic framework (POM@MOF) material, [Cu₂(BTC)_4/3(H₂O)₂]₆[H₃PMo₁₂O₄₀]₂ or POM@Cu‐BTC, for the oxidation of spiro‐OMeTAD with Li‐TFSI and TBP. When POM@Cu‐BTC is introduced to the HTM layer as a dopant, the PSCs achieve a superior fill factor of 0.80 and enhanced power conversion efficiency 21.44 %, as well as improved long‐term stability in an ambient atmosphere without encapsulation. The enhanced performance is attributed to the oxidation activity of POM anions and solid‐state nanoparticles. Therefore, this research presents a facile way by using hybrid porous materials to accelerate oxidation of spiro‐OMeTAD, further improving the efficiency and stability of PSCs.     

Inverted Perovskite Solar Cells Based on Small Molecular Hole Transport Material C8‐Dioctylbenzothienobenzothiophene

The small organic molecular Dioctylbenzothienobenzothiophene (C₈‐BTBT) has been explored as hole transport material (HTM) to replace PEDOT:PSS in inverted perovskite solar cells (PVSCs). MAPbI₃ perovskite films depositd onto C₈‐BTBT are smooth and uniform, with negligible residual of PbI₂ and large grain size even larger than 1 μm. Our champion C₈‐BTBT based devices reached a high power conversion efficiency (PCE) of 15.46% with marginal hysteresis, much higher than that of 11.50% achieved using PEDOT:PSS. Besides, devices adopting C₈‐BTBT as substrate show superior stability compared with the PEDOT:PSS based devices when stored under ambient conditions with a relative humidity of (25±5)%.     

A Simple 3,4‐Ethylenedioxythiophene Based Hole‐Transporting Material for Perovskite Solar Cells

We report a novel electron‐rich molecule based on 3,4‐ethylenedioxythiophene (H101). When used as the hole‐transporting layer in a perovskite‐based solar cell, the power‐conversion efficiency reached 13.8 % under AM 1.5G solar simulation. This result is comparable with that obtained using the well‐known hole transporting material 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene (spiro‐OMeTAD). This is the first heterocycle‐containing material achieving >10 % efficiency in such devices, and has great potential to replace the expensive spiro‐OMeTAD given its much simpler and cheaper synthesis.     

Highly Efficient Perovskite Solar Cells Employing an Easily Attainable Bifluorenylidene‐Based Hole‐Transporting Material

The 4,4′‐dimethoxydiphenylamine‐substituted 9,9′‐bifluorenylidene ( KR216 ) hole transporting material has been synthesized using a straightforward two‐step procedure from commercially available and inexpensive starting reagents, mimicking the synthetically challenging 9,9′‐spirobifluorene moiety of the well‐studied spiro‐OMeTAD. A power conversion efficiency of 17.8 % has been reached employing a novel HTM in a perovskite solar cells.     

Direct C−H Arylation Meets Perovskite Solar Cells: Tin‐Free Synthesis Shortcut to High‐Performance Hole‐Transporting Materials

In contrast to the traditional multistep synthesis, we demonstrate herein a two‐step synthesis shortcut to triphenylamine‐based hole‐transporting materials (HTMs) through sequential direct C?H arylations. These hole‐transporting molecules are fabricated in perovskite‐based solar cells (PSCs) that exhibit promising efficiencies up to 17.69 %, which is comparable to PSCs utilizing commercially available 2,2′,7,7′‐tetrakis[N,N‐di(4‐methoxyphenyl)amino]‐9,9′‐spirobifluorene (spiro‐OMeTAD) as the HTM. This is the first report describing the use of step‐saving C?H activations/arylations in the facile synthesis of small‐molecule HTMs for perovskite solar cells.     

Free‐Standing Conducting Polymer Films for High‐Performance Energy Devices

Thick, uniform, easily processed, highly conductive polymer films are desirable as electrodes for solar cells as well as polymer capacitors. Here, a novel scalable strategy is developed to prepare highly conductive thick poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (HCT‐PEDOT:PSS) films with layered structure that display a conductivity of 1400 S cm^?1 and a low sheet resistance of 0.59 ohm sq^?1. Organic solar cells with laminated HCT‐PEDOT:PSS exhibit a performance comparable to the reference devices with vacuum‐deposited Ag top electrodes. More importantly, the HCT‐PEDOT:PSS film delivers a specific capacitance of 120 F g^?1 at a current density of 0.4 A g^?1. All‐solid‐state flexible symmetric supercapacitors with the HCT‐PEDOT:PSS films display a high volumetric energy density of 6.80 mWh cm^?3 at a power density of 100 mW cm^?3 and 3.15 mWh cm^?3 at a very high power density of 16160 mW cm^?3 that outperforms previous reported solid‐state supercapacitors based on PEDOT materials.     

Efficient Hole‐Transporting Materials with Triazole Core for High‐Efficiency Perovskite Solar Cells

Efficient hole‐transporting materials (HTMs), TAZ‐[MeOTPA]₂ and TAZ‐[MeOTPATh]₂ incorporating two electron‐rich diphenylamino side arms, through direct linkage or thiophen bridges, respectively, on the C3‐ and C5‐positions of a 4‐phenyl‐1,2,4‐triazole core were synthesized. These synthetic HTMs with donor–acceptor type molecular structures exhibited effective intramolecular charge transfer for improving the hole‐transporting properties. The structural modification of HTMs by thiophene bridging might increase intermolecular π–π stacking in the solid state and afford a better spectral response because of their increased π‐conjugation length. Perovskite‐based cells using TAZ‐[MeOTPA]₂ and TAZ‐[MeOTPATh]₂ as HTMs afforded high power conversion efficiencies of 10.9 % and 14.4 %, respectively, showing a photovoltaic performance comparable to that obtained using spiro‐OMeTAD. These synthetically simple and inexpensive HTMs hold promise for replacing the more expensive spiro‐OMeTAD in high‐efficiency perovskite solar cells.     

Benzotrithiophene‐Based Hole‐Transporting Materials for 18.2 % Perovskite Solar Cells

New star‐shaped benzotrithiophene (BTT)‐based hole‐transporting materials (HTM) BTT‐1, BTT‐2 and BTT‐3 have been obtained through a facile synthetic route by crosslinking triarylamine‐based donor groups with a benzotrithiophene (BTT) core. The BTT HTMs were tested on solution‐processed lead trihalide perovskite‐based solar cells. Power conversion efficiencies in the range of 16 % to 18.2 % were achieved under AM 1.5 sun with the three derivatives. These values are comparable to those obtained with today's most commonly used HTM spiro‐OMeTAD, which point them out as promising candidates to be used as readily available and cost‐effective alternatives in perovskite solar cells (PSCs).     

Cyclometalated Ruthenium(II) Complexes Featuring Tridentate Click‐Derived Ligands for Dye‐Sensitized Solar Cell Applications

A series of heteroleptic bis(tridentate) Ru^II complexes featuring N^C^N‐cyclometalating ligands is presented. The 1,2,3‐triazole‐containing tridentate ligands are readily functionalized with hydrophobic side chains by means of click chemistry and the corresponding cyclometalated Ru^II complexes are easily synthesized. The performance of these thiocyanate‐free complexes in a dye‐sensitized solar cell was tested and a power conversion efficiency (PCE) of up to 4.0 % (J_sc=8.1 mA cm^?2, V_oc=0.66 V, FF=0.70) was achieved, while the black dye ((NBu₄)₃[Ru(Htctpy)(NCS)₃]; Htctpy=2,2′:6′,2′′‐terpyridine‐4′‐carboxylic acid‐4,4′′‐dicarboxylate) showed 5.2 % (J_sc=10.7 mA cm^?2, V_oc=0.69 V, FF=0.69) under comparable conditions. When co‐adsorbed with chenodeoxycholic acid, the PCE of the best cyclometalated dye could be improved to 4.5 % (J_sc=9.4 mA cm^?2, V_oc=0.65 V, FF=0.70). The PCEs correlate well with the light‐harvesting capabilities of the dyes, while a comparable incident photon‐to‐current efficiency was achieved with the cyclometalated dye and the black dye. Regeneration appeared to be efficient in the parent dye, despite the high energy of the highest occupied molecular orbital. The device performance was investigated in more detail by electrochemical impedance spectroscopy. Ultimately, a promising Ru^II sensitizer platform is presented that features a highly functionalizable “click”‐derived cyclometalating ligand.     

Poly((2‐alkylbenzo[1,2,3]triazole‐4,7‐diyl)vinylene)s for organic solar cells

Poly((2‐Alkylbenzo[1,2,3]triazole‐4,7‐diyl)vinylene)s (pBTzVs) synthesized by Stille coupling show different absorption spectra, solid‐state morphology, and photovoltaic performance, depending on straight‐chain versus branched‐chain (pBTzV12 and pBTzV20) pendant substitution. Periodic boundary condition density functional computations show limited alkyl pendant effects on isolated chain electronic properties; however, pendants could influence polymer backbone conjugative planarity and polymer solid film packing. The polymers are electronically ambipolar, with best performance by pBTzV12 with hole and electron transport mobilities of 4.86 × 10^?6 and 1.96 × 10^?6 cm² V^?1 s^?1, respectively. pBTzV12 gives a smooth film morphology, whereas pBTzV20 gives a very different fibrillar morphology. For ITO/PEDOT:PSS/(1:1 w/w polymer:PC₇₁BM)/LiF/Al devices, pBTzV12 gives power conversion efficiency (PCE) up to 2.87%, and pBTzV20 gives up to PCE = 1.40%; both have open‐circuit voltages of V_OC = 0.6–0.7 V. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1539–1545     

Tailor‐Made Hole‐Conducting Coadsorbents for Highly Efficient Organic Dye‐Sensitized Solar Cells

The Y‐shaped, low molecular mass, hole‐conductor (HC), acidic coadsorbents 4‐{3,7‐bis[4‐(2‐ethylhexyloxy)phenyl]‐10H‐phenothiazin‐10‐yl}benzoic acid ( PTZ1 ) and 4‐{3,7‐bis[4‐(2‐ethylhexyloxy)phenyl]‐10H‐phenothiazin‐10‐yl}biphenyl‐4‐carboxylic acid ( PTZ2 ) were developed. Owing to their tuned and negative‐shifted HOMO levels (vs. NHE), they were used as HC coadsorbents in dye‐sensitized solar cells (DSSCs) to improve cell performance through desired cascade‐type hole‐transfer processes. Their detailed functions as HC coadsorbents in DSSCs were investigated to obtain evidence for the desired cascade‐type hole‐transfer processes. They have multiple functions, such as preventing π–π stacking of dye molecules, harvesting light of shorter wavelengths, and faster dye regeneration. By using PTZ2 as the tailor‐made HC coadsorbent on the TiO₂ surface with the organic dye NKX2677, an extremely high conversion efficiency of 8.95 % was achieved under 100 mW cm^?2 AM 1.5G simulated light (short‐circuit current J_SC=16.56 mA cm^?2, open‐circuit voltage V_OC=740 mV, and fill factor of 73 %). Moreover, J_SC was increased by 13 %, V_OC by 27 % and power‐conversion efficiency by 49 % in comparison to an NKX2677‐based DSSC without an HC coadsorbent. This is due to the HC coadsorbent having a HOMO energy level well matched to that of the NKX‐2677 dye to induce the desired cascade‐type hole‐transfer processes, which are associated with a slower charge recombination, fast dye regeneration, effective screening of liquid electrolytes, and an induced negative shift of the quasi‐Fermi level of the electrode. Thus, this new class of Y‐shaped, low molecular weight, organic, HC coadsorbents based on phenothiazine carboxylic acid derivatives hold promise for highly efficient organic DSSCs.     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Efficient Hole Transporting Materials with Two or Four N,N‐Di(4‐methoxyphenyl)aminophenyl Arms on an Ethene Unit for Perovskite Solar Cells

Novel steric bulky hole transporting materials (HTMs) with two or four N,N‐di(4‐methoxyphenyl)aminophenyl units have been synthesized. When the EtheneTTPA was used as a hole transporting material in perovskite solar cell, the power conversion efficiency afforded 12.77 % under AM 1.5 G illumination, which is comparable to the widely used spiro‐OMeTAD based solar cell (13.28 %).