A Novel Thermocell System Using Proton Solvation Entropy

The entropy change associated with proton-coupled electron transfer (PCET) reactions significantly enhance the Seebeck coefficient (S_e) of thermocells. A redox pair of [Ru(H_xim)₆]^2+/3+ (Him=imidazole, x=0≈1) releases three protons in their one-electron redox reactions in thermocells, which gave a remarkably high S_e of −3.7 mV K⁻¹ as confirmed by temperature-dependent square wave voltammetry. The value of S_e is proportional to the redox reaction entropy (ΔS_rc), which increased with the number of dissociating protons. This result demonstrates the utility of PCET reaction toward efficient thermoelectric conversion.     

Temperature‐Dependent Prediction of the Liquid Entropy of Ionic Liquids

Modeling of the temperature‐dependent liquid entropy of ionic liquids (ILs) with great accuracy using COSMO‐RS is demonstrated. The minimum structures of eight IL ion pairs are investigated and the entropy, calculated from ion pairs, is found to differ on average only 2 % from the available experimental values (119 data points). For calculations with single ions, the average error amounts to 2.6 % and stronger‐coordinating ions tend to give higher deviations. Additionally, the first parameterization of the standard liquid entropy for ILs is presented in the context of traditional volume‐based thermodynamics (S_l⁰=1.585 kJ mol^?1 K^?1 nm^?3?r_m³+14.09 J mol^?1 K^?1), which sheds light on the statistical treatment of ionic interactions. The findings provide the first direct access to accurate predictions of liquid entropies of ILs, which are tedious and time‐consuming to measure.     

The Influence of Water Vapor on the Electrochemical Shift of an Ionic Liquid Measured by Ambient Pressure X-ray Photoelectron Spectroscopy

Ionic liquids (ILs) are considered to be one of the steppingstones to fabricate next generation electrochemical devices given their unique physical and chemical properties. The addition of water to ILs significantly impact electrochemical related properties including viscosity, density, conductivity, and electrochemical window. Herein we utilize ambient pressure X-ray photoelectron spectroscopy (APXPS) to examine the impact of water on values of the electrochemical shift (S), which is determined by measuring changes in binding energy shifts as a function of an external bias. APXPS spectra of C 1s, O 1s and N 1s regions are examined for the IL 1-butyl-3-methylimidazolium acetate, [C₄mim][OAc], at the IL/gas interface as a function of both water vapor pressure and external bias. Results reveal that in the absence of water vapor there is an IL ohmic drop between the working electrode and quasi reference electrode, giving rise to chemical specific S values of less than one. Upon introducing water vapor, S values approach one as a function of increasing water vapor pressure, indicating a decrease in the IL ohmic drop as the IL/water mixture becomes more conductive and the potential drop is driven by the electric double layer at the electrode/IL interface.     

Recent Advances of Cobalt(II/III) Redox Couples for Dye‐Sensitized Solar Cell Applications

In recent years dye‐sensitized solar cells (DSSCs) have emerged as one of the alternatives for the global energy crisis. DSSCs have achieved a certified efficiency of >11% by using the I^?/I₃^? redox couple. In order to commercialize the technology almost all components of the device have to be improved. Among the various components of DSSCs, the redox couple that regenerates the oxidized sensitizer plays a crucial role in achieving high efficiency and durability of the cell. However, the I^?/I₃^? redox couple has certain limitations such as the absorption of triiodide up to 430 nm and the volatile nature of iodine, which also corrodes the silver‐based current collectors. These limitations are obstructing the commercialization of this technology. For this reason, one has to identify alternative redox couples. In this regard, the Co(II/III) redox couple is found to be the best alternative to the existing I^?/I₃^? redox couple. Recently, DSSC test cell efficiency has risen up to 13% by using the cobalt redox couple. This review emphasizes the recent development of Co(II/III) redox couples for DSSC applications.     

SnS‐Quantum Dot Solar Cells Using Novel TiC Counter Electrode and Organic Redox Couples

Low‐cost quantum‐dot sensitized solar cells (QDSSCs) were fabricated by using the earth‐abundant element SnS quantum dot, novel TiC counter electrodes, and the organic disulfide/thiolate (T₂/T^?) redox couple, and reached an efficiency of 1.03 %. QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples were assembled to study the role of the redox couples in the regeneration of sensitizers. Charge‐extraction results reveal the reasons for the difference in J_SC in three QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples. The catalytic selectivity of TiC and Pt towards T₂/T^? and I^?/I₃^? redox couples was investigated using Tafel polarization and electrochemical impedance analysis. These results indicated that Pt and TiC show a similar catalytic selectivity for I^?/I₃^?. However, TiC possesses better catalytic activity for T₂/T^? than for I^?/I₃^?. These results indicate the great potential of transition metal carbide materials and organic redox couples used in QDSSCs.     

Absolute Brønsted Acidities and pH Scales in Ionic Liquids

Although receiving large interest over the last years, some fundamental aspects of Brønsted acidity in ionic liquids (ILs) have up to now been insufficiently highlighted. In this work, standard states, activity, and activity coefficient definitions for IL solvent systems were developed from general thermodynamic considerations and then extended to a general mixed solvent standard state. By using the bromide/bromoaluminate systems as representative ILs, formulae for thermodynamically consistent pH scales for ILs with simple (Br^?) and complex ([Al_nBr_3n+1]^?) anions were derived on the basis of the chemical potential of the proton. Supported by quantum chemical [ccsd(t)/MP2/DFT/COSMO‐RS] calculations, Gibbs solvation energies of the proton were calculated, which allowed the ILs to be ranked in absolute acidity, that is, pH_abs or μ_abs(H⁺, IL), and additionally allowed their acidity to be compared with molecular Brønsted acid systems. It was shown that bromoaluminate ILs are suited for reaching superacidic conditions. The complexity of autoprotolysis processes in C₆MIM⁺[AlBr₄]^? (C₆MIM=1‐hexyl‐3‐methylimidazolium) with or without the addition of basic (i.e. Br^?) or acidic (AlBr₃ and/or HBr) solutes was examined in detail by model calculations, and they indicated a large thermodynamic influence of small deviations from the exact stoichiometric composition.     

Ionic Liquids - New Solvents in the Free Radical Polymerization

Summary: The analysis of the influence of ionic liquids (ILs) in polymer synthesis as an alternative for common organic solvents is still an active field of research. 1 Using ILs as solvents for free radical polymerizations implies a significant increase in polymerization rates and molecular weights which can be observed. In this work we examined the copolymerization behaviour of styrene (S) and methyl methacrylate (MMA), glycidyl methacrylate (GMA) and 2-hydroxypropyl methacrylate (HPMA) with acrylonitrile (AN) in 1-etyhl-3-methylimidazolium ethylsulfate ([EMIM]EtSO₄). ILs are liquids with comparable high polarities and viscosities. These two characteristic properties are strongly correlated with the rate coefficients of propagation k_p and termination k_t. 2 - 4 The rate constant of termination k_t decreases when the IL concentration and therefore the viscosity of the reaction mixture is increased, whereas the propagation rate coefficient k_p increases with increasing IL content. The viscosity of the IL can be varied by either working with mixtures of IL with conventional organic solvents – here the IL [EMIM]EtSO₄ was mixed with DMF – or by variation of the temperature. The influence of the viscosity of the IL ([EMIM]EtSO₄) on polymerization kinetics of methyl methacrylate (MMA) and styrene/acrylonitrile (S/AN) was investigated.     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Preparation and Electrochemical Behaviour of Silver Pentacyanonitrosylferrate Film Modified Glassy Carbon Electrode and Its Electrocatalytic Oxidation to L‐cysteine

A glassy carbon (GC) electrode modified with silver pentacyanonitrosylferrate (AgPCNF) film as a redox mediator was fabricated. Cyclic voltammetry was used to study the redox property of AgPCNF modified electrode. The modified electrode showed a well‐defined redox couple due to [Ag^IFe^III/II(CN)₅NO]^1‐/2‐system. The effects of scan rates, supporting electrolytes and solution pHs were studied on the electrochemical behavior of the modified electrode. The feasibility of using the AgPCNF modified electrode to measure L ‐cysteine was investigated. It showed an excellent electrocatalytic activity towards the oxidation of L ‐cysteine and the anodic currents were proportional to the L ‐cysteine concentration in the range of 0.1 μM to 20 μM, the linear regression equation is I_pa(μA) = ‐68.58 ‐ 5.78C_{L ‐cysteine} (μM), with a correlation coefficient 0.998 for N = 23. The detection limit was down to 3.5 × 10^‐8 M (three times the ratio of signal to noise).     

Electron Capture by the Thiyl Radical and Disulfide Bond: Ligand Effects on the Reduction Potential

The effect of non‐polar and polar ligands and of monovalent cations on the one‐electron reduction potential of the thiyl radical and the disulfide bond was evaluated. The reduction potentials E° for the CH₃S^.–n L/CH₃S^?–n L and CH₃SSCH₃–L/CH₃SSCH₃^.?–L redox couples were calculated at the B3LYP, M06‐2X and MP2 levels of theory, with n=1, 2 and L=CH₄, C₂H₄, H₂O, CH₃OH, NH₃, CH₃COOH, CH₃CONH₂, NH₄⁺, Na⁺, K⁺ and Li⁺. Non‐polar ligands decrease the E° value of the thiyl radical and disulfide bond, while neutral polar ligands favour electron uptake. Charged polar ligands and cations favour electron capture by the thiyl radical while disfavouring electron uptake by the disulfide bond. Thus, the same type of ligand can have a different effect on E° depending on the redox couple. Therefore, properties of an isolated ligand cannot uniquely determine E°. The ligand effects on E° are discussed in terms of the vertical electron affinity and reorganization energy, as well as molecular orbital theory. For a given redox couple, the ligand type influences the nature of the anion formed upon electron capture and the corresponding reorganization process towards the reduced geometry.     

Direct Electrochemistry and Electrocatalysis of Myoglobin with Ionic Liquid through Multilayers Film on Carbon Ionic Liquid Electrode

Multilayers of myoglobin (Mb) with ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM]BF₄) was assembled on carbon ionic liquid electrode (CILE) based on the electrostatic attraction between the negatively charged Mb and the positively charged imidazolium ion of IL. The CILE was fabricated with 1‐ethyl‐3‐methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as the modifier, which exhibited imidazolium ion on the electrode surface. Then Mb molecules were assembled on the surface of CILE step‐by‐step to get a {IL/Mb}_n multilayer film modified electrode. UV‐Vis adsorption and FT‐IR spectra indicated that Mb remained its native structure in the IL matrix. In deaerated phosphate buffer solution (pH 7.0) a pair of well‐defined quasi‐reversible redox peaks appeared with the apparent formal potential (E^0′) as ‐0.212 V (vs. SCE), which was the characteristic of Mb heme Fe(III)/Fe(II) redox couples. The results indicated that the direct electron transfer of Mb was realized on the modified electrode. The {IL/Mb}_n/CILE displayed excellent electrocatalytic ability to the trichloroacetic acid reduction in the concentration range from 2.0 to 22.0 mmol/L with the detection limit of 0.6 mmol/L (3σ). The proposed method provides a new platform to fabricate the third generation biosensor based on the self‐assembly of redox protein with ILs.     

On the Dynamic Interaction of n‐Butane with Imidazolium‐Based Ionic Liquids

The impact of a reactant from the gas phase on the surface of a liquid and its transfer through this gas/liquid interface are crucial for various concepts applying ionic liquids (ILs) in catalysis. We investigated the first step of the adsorption dynamics of n‐butane on a series of 1‐alkyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([C_nC₁Im][Tf₂N]; n=1, 2, 3, 8). Using a supersonic molecular beam in ultra‐high vacuum, the trapping of n‐butane on the frozen ILs was determined as a function of surface temperature, between 90 and 125 K. On the C₈‐ and C₃‐ILs, n‐butane adsorbs at 90 K with an initial trapping probability of ≈0.89. The adsorption energy increases with increasing length of the IL alkyl chain, whereas the ionic headgroups seem to interact only weakly with n‐butane. The absence of adsorption on the C₁‐ and C₂‐ILs is attributed to a too short residence time on the IL surface to form nuclei for condensation even at 90 K.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Analysis of aromatic acids by nonaqueous capillary electrophoresis with ionic‐liquid electrolytes

The separation of six kinds of aromatic acids by CZE with 1‐ethyl‐3‐methylimidazolium chloride (EMIMCl) and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate (EMIMHSO₄)_, two kinds of ionic liquids (ILs) as background electrolytes, and acetonitrile as solvent were investigated. The six kinds of aromatic acids can be separated under positive voltage with low IL concentration with either of the two ILs and separation with EMIMHSO₄ is better in consideration of peak shapes and separation efficiency. But the migration order is different when the IL is different. Under negative voltage with high IL concentration, the six analytes can be separated with EMIMCl as background electrolytes and the migration order of the analytes is opposite to those with low concentration of EMIMCl as background electrolyte. The separations are based on the combination effects of heteroconjugation between the anions and cations in the ILs and the analytes, of which the heteroconjugation between the anions in the ILs and the analytes plays a dominant role. The heteroconjugation between the anions of the ILs and analytes is proton sensitive and only a very small amount of proticsolvents added into the electrolyte solution can harm the separation. When EMIMCl concentration is high, the heteroconjugation between the IL anions and the proton in the analytes make the effective mobility of the analytes much higher than the EOF and their migration direction reversed. Finally, the six aromatic acids in water samples were analyzed by nonaqueous CE with low concentration of EMIMHSO₄ as background electrolytes with satisfactory results.     

Inverting the Triiodide Formation Reaction by the Synergy between Strong Electrolyte Solvation and Cathode Adsorption for Lithium–Oxygen Batteries

An exceptionally strong solvation effect of dimethyl sulfoxide (DMSO) on I₂ is identified by the largest shift observed so far of the I₂ Raman peak with respect to I₂ vapor and by elongated I?I bond lengths in first‐principles molecular‐dynamics simulations. This effect together with strong binding by an RuO₂ surface to I₂ is found to invert the direction of the reaction I^?+I₂?I₃^? to the left‐hand side. Inspired by this finding, we prepared a Li–O₂ battery with the Li/DMSO+LiI/RuO₂ structure. The synergic action of DMSO and RuO₂ on I₂ is found to suppress the shuttle effect of the redox mediator (RM) by anchoring I₂ molecules, the oxidation product of the RM. Significantly enhanced stability is demonstrated over 100 cycles at charging voltage below 3.65 V.     

Fast,Reversible Lithium Storage with a Sulfur/Long‐Chain‐Polysulfide Redox Couple

The cathodic reactions in Li–S batteries can be divided into two steps. Firstly, elemental sulfur is transformed into long‐chain polysulfides (S₈?Li₂S₄), which are highly soluble in the electrolyte. Next, long‐chain polysulfides undergo nucleation reaction and convert into solid‐state Li₂S₂ and Li₂S (Li₂S₄?Li₂S) by slow processes. As a result, the second‐step of the electrochemical reaction hinders the high‐rate application of Li–S batteries. In this report, the kinetics of the sulfur/long‐chain‐polysulfide redox couple (theoretical capacity=419 mA h g^?1) are experimentally demonstrated to be very fast in the Li–S system. A Li–S cell with a blended carbon interlayer retains excellent cycle stability and possesses a high percentage of active material utilization over 250 cycles at high C rates. The meso‐/micropores in the interlayer are responsible for accommodating the shuttling polysulfides and offering sufficient electrolyte accessibility. Therefore, utilizing the sulfur/long‐chain polysulfide redox couple with an efficient interlayer configuration in Li–S batteries may be a promising choice for high‐power applications.     

Formation of the Distinct Redox‐Interrelated Forms of Nitric Oxide from Reaction of Dinitrosyl Iron Complexes (DNICs) and Substitution Ligands

Release of the distinct NO redox‐interrelated forms (NO⁺, ^.NO, and HNO/NO^?), derived from reaction of the dinitrosyl iron complex (DNIC) [(NO)₂Fe(C₁₂H₈N)₂]^? ( 1 ) (C₁₂H₈N=carbazolate) and the substitution ligands (S₂CNMe₂)₂, [SC₆H₄‐o‐NHC(O)(C₅H₄N)]₂ ((PyPepS)₂), and P(C₆H₃‐3‐SiMe₃‐2‐SH)₃ ([P(SH)₃]), respectively, was demonstrated. In contrast to the reaction of (PyPepS)₂ and DNIC 1 in a 1:1 stoichiometry that induces the release of an NO radical and the formation of complex [PPN][Fe(PyPepS)₂] ( 4 ), the incoming substitution ligand (S₂CNMe₂)₂ triggered the transformation of DNIC 1 into complex [(NO)Fe(S₂CNMe₂)₂] ( 2 ) along with N‐nitrosocarbazole ( 3 ). The subsequent nitrosation of N‐acetylpenicillamine (NAP) by N‐nitrosocarbazole ( 3 ) to produce S‐nitroso‐N‐acetylpenicillamine (SNAP) may signify the possible formation pathway of S‐nitrosothiols from DNICs by means of transnitrosation of N‐nitrosamines. Protonation of DNIC 1 by [P(SH)₃] triggers the release of HNO and the generation of complex [PPN][Fe(NO)P(C₆H₃‐3‐SiMe₃‐2‐S)₃] ( 5 ). In a similar fashion, the nucleophilic attack of the chelating ligand P(C₆H₃‐3‐SiMe₃‐2‐SNa)₃ ([P(SNa)₃]) on DNIC 1 resulted in the direct release of [NO]^? captured by [(¹⁵NO)Fe(SPh)₃]^?, thus leading to [(¹⁵NO)(¹⁴NO)Fe(SPh)₂]^?. These results illustrate one aspect of how the incoming substitution ligands ((S₂CNMe₂)₂ vs. (PyPepS)₂ vs. [P(SH)₃]/[P(SNa)₃]) in cooperation with the carbazolate‐coordinated ligands of DNIC 1 function to control the release of NO⁺, ^.NO, or [NO]^? from DNIC 1 upon reaction of complex 1 and the substitution ligands. Also, these results signify that DNICs may act as an intermediary of NO in the redox signaling processes by providing the distinct redox‐interrelated forms of NO to interact with different NO‐responsive targets in biological systems.