2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Evidence for Dual Pathway in Through‐Space Singlet Energy Transfers in Flexible Cofacial Bisporphyrin Dyads

Flexible “pacman” scaffolds built upon a calix[4]arene platform bearing a [18]crown‐6 ether and either two OH functions or two OPr groups at the lower rim have been used to generate donor–acceptor (D–A) dyads incorporating a zinc–porphyrin donor and a free‐base porphyrin acceptor. Through‐space singlet energy transfer (SET) in the D–A dyads was studied by time‐resolved fluorescence spectroscopy. Although the effects of conformational changes are well documented when the chromophores switch from a non‐cofacial to a cofacial arrangement, little is known about flexible pacman scaffolds in which the changes are limited to the distance between the chromophores. The known SET rates for reported, geometrically well‐defined, rigid pacman D–A dyads were used as calibration to estimate the D–A distances in the flexible pacman dyads. Due to the flexibility of the calix[4]arene spacer, the D–A dyads adopt a “closed” or “open” geometry that is tuned by intramolecular hydrogen bonds (O? H???[18]crown‐6 ether) and by solvent interactions. Changes in the SET rates between the open and closed geometries were surprisingly less dramatic than expected, and are explained by a dual SET pathway that is specific to the calix[4]arene platform. Time‐resolved fluorescence studies support the hypothesis that, for the “open” conformer, the preferred through space SET pathway (i.e., at the shortest distance) is located within the calix[4]arene cavity through the cofacial phenyl groups. For the “closed” conformer, the preferred through space SET route is located between the zinc and free‐base porphyrins.     

Time Programmable Locking/Unlocking of the Calix[4]arene Scaffold by Means of Chemical Fuels

In this work, we report that 2-cyano-2-phenylpropanoic acid and its p-Cl, p-CH₃ and p-OCH₃ derivatives can be used as chemical fuels to control the geometry of the calix[4]arene scaffold in its cone conformation. It is shown that, under the action of the fuel, the cone calix[4]arene platform assumes a “locked” shape with two opposite aromatic rings strongly convergent and the other two strongly divergent (“pinched cone” conformation). Only when the fuel is exhausted, the cone calix[4]arene scaffold returns to its resting, “unlocked” shape. Remarkably, the duration of the “locked” state can be controlled at will by varying the fuel structure or amount. A kinetic study of the process shows that the consume of the fuel is catalyzed by the “unlocked” calixarene that behaves as an autocatalyst for its own production. A mechanism is proposed for the reaction of fuel consumption.     

Synthesis of Calix[4]arene Derivatives with NLO Properties

The new chromophore compounds with NLO properties were prepared by Knoevenagel condensation from forrnyl or diformyl calix[4/arene and isophorone derivatives in the presence of piperidine and acetic acid, respectively. In these chromophore calix[4]arenes, the ring locked trienes were employed as the conjugation bridge and electron acceptor in D-π-A units. The NMR spectra demonstrated that they existed in a cone conformation and consequently non-conjugated D-π-A units could be oriented at nearly the same direction.     

对磺酸基杯[4]芳烃与血红蛋白相互作用的光谱研究

用荧光光谱法和紫外可见分光光度法研究了表面活性剂存在下对磺酸基杯[4]芳烃与牛血红蛋白的相互作用机理。由Stern-Volmer方程及紫外可见吸收光谱图确定对磺酸基杯[4]芳烃对血红蛋白的荧光猝灭过程为动态猝灭,求出了猝灭常数。由热力学参数判断二者之间的作用力主要是疏水作用。依据能量转移理论得出荧光给体-受体间的距离r。在同步荧光光谱中,对磺酸基杯[4]芳烃的加入对血红蛋白构象的改变不大。     

Synthesis of upper rim calix[4]arene divalent glycoclusters via amide bond conjugation

Synthetic routes for linking two sugar units at the upper rim of cone calix[4]arenes, through the formation of amide bonds, have been explored. Steric effects prevent the coupling of calix[4]arene dicarboxylic acid with simple aminoglycosides, whereas the corresponding reaction with carbohydrates bearing a two or three carbon atoms spacer, terminating with a primary amino group, allows the synthesis of several difunctionalized calix[4]arene neoglycoconjugates, attractive in chemical glycobiology and supramolecular chemistry.     

Theoretical investigation on the rotational isomerism of calix[4]arenes: influence of the hydroxyl --> methoxy replacement

The rotational isomerism of calix[4]arene, 25,27-dihydroxy-26,28-dimethoxycalix[4]arene, and 25,26,27,28-tetramethoxycalix[4]arene in different environments has been examined using sophisticated ab initio and DFT calculations. Free energies in the gas phase, in chloroform, and in toluene have been calculated not only for the minimum energy conformations cone and paco, which differ in the orientation of one phenol/anisole ring with respect to the other three, but also for the transition state that connects these two minima. Results provide a complete understanding of the changes induced by the partial or total OH --> OCH3 replacement in the calix[4]arene scaffold.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Synthesis of novel biscalixarene-tube containing two kinds of calix[4]arene derivative units

A novel biscalixarene with two kinds of calix[4]arene derivative units connected by four bridging chains, was facilely＇ synthesized by ＂1 ＋ 1＂ condensation mode in high yield. The element analyses, ESI-MS, ^1H NMR and ^1H-^1H COSY spectrum showed that the calix[4]arene units of compound 4 were in cone conformations and compound 4 possessed biscalixarene-tube structure. 2007 Fa Fu Yang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

Molecular dynamics of a calix[4]arene-containing polymer in dichloromethane solution: ability of the solvent molecules to fill the cavity of the macrocycle

The structure and dynamics of the dichloromethane solvent around the calix[4]arene units contained in the molecular actuator poly(calix[4]arene bis-bithiophene) have been examined using a 1-micros molecular dynamics simulation. Results indicate that a solvent molecule fills the cavity associated to the cone conformation of the macrocycle during a significant period of time, especially when the actuator is not contracted. The position of such solvent molecule presents a fourfold symmetry with a maximum orientation toward the center of each ring contained in the calix[4]arene. Frequently, the solvent molecule located inside the cavity is rapidly exchanged for another molecule of the bulk. Thus, the number of dichloromethane molecules that reside more than 0.5 ns inside the cavity is relatively small. Finally, we detected that a significant number of solvent molecules are able to migrate from the cavity of one calix[4]arene to the cavity/ies of other/s, suggesting that the dynamics of the bulk solvent is important for the formation of these inclusion complexes.     

Upper rim guanidinocalix[4]arenes as artificial phosphodiesterases

Calix[4]arene derivatives, blocked in the cone conformation and functionalized with two to four guanidinium units at the upper rim were synthesized and investigated as catalysts in the cleavage of the RNA model compound 2-hydroxypropyl p-nitrophenyl phosphate. When compared with the behavior of a monofunctional model compound, the catalytic superiority of the calix[4]arene derivatives points to a high level of cooperation between catalytic groups. Combination of acidity measurements with the pH dependence of catalytic rates unequivocally shows that a necessary requisite for effective catalysis is the simultaneous presence, on the same molecular framework, of a neutral guanidine acting as a general base and a protonated guanidine acting as an electrophilic activator. The additional guanidinium (guanidine) group in the diprotonated (monoprotonated) trifunctional calix[4]arene acts as a more or less innocent spectator. This is not the case with the tetrasubstituted calix[4]arene, whose mono-, di-, and triprotonated forms are slightly less effective than the corresponding di- and triguanidinocalix[4]arene derivatives, most likely on account of a steric interference with HPNP caused by overcrowding.     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

The selective preparation of partial cone O-aryl calix[4]arene ethers from 1,3-dimethoxycalix[4]arene: a new platform for the preparation of non-aggregated dyes

We report a new direct route for the selective preparation of novel partial cone O-aryl ether calix[4]arenes to be used as new platforms for the preparation of non-aggregated dyes. These partial cone conformers have the aromatic substituents lying within the calix[4]arene annulus via the upper rim.     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Synthesis, electrochemical and intramolecular charge-transfer properties of ‘calix[4]arene-acceptor’ diad and triad derivatives

Calix[4]arenes substituted with various acceptor moieties (naphthoquinone (NQ), tetracyanoanthraquinodimethane (TCNAQ)) have been synthesized. In these derivatives the three-dimensional structure of calix[4]arene acts as a weak electron donor (D), connected via a linear sigma spacer to one or two electroactive acceptor (A) units. The electrochemical behavior of these derivatives has been studied by cyclic voltammetry. The UV-Vis spectrum of the TCNAQ triad (A-D-A, 13) reveals the presence of a weak intramolecular charge transfer absorption band.     

Exchange coupling mediated through-bonds and through-space in conformationally constrained polyradical scaffolds: calix[4]arene nitroxide tetraradicals and diradical

Calix[4]arenes constrained to the 1,3-alternate conformation and functionalized at the upper rim with four and two tert-butylnitroxides have been synthesized and characterized by X-ray crystallography, magnetic resonance (EPR and (1)H NMR) spectroscopy, and magnetic studies. The 1,3-alternate nitroxide tetraradical and diradical provide unique polyradical scaffolds for dissection of the through-bond and through-space intramolecular exchange couplings. In addition, detailed magnetic studies of the previously reported calix[4]arene nitroxide tetraradical, which possesses cone conformation in solution, reveal conformational dependence of exchange coupling. Through-bond coupling between the adjacent nitroxide radicals is mediated by the nitroxide-m-phenylene-CH(2)-m-phenylene-nitroxide coupling pathway, and through-space coupling is found between the diagonal nitroxide radicals at the conformationally constrained N...N distance of 5-6 A. Magnetic studies of the calix[4]arene polyradical scaffolds in frozen solutions show that the through-bond exchange coupling in the 1,3-alternate calix[4]arene tetraradical is antiferromagnetic, while that in cone calix[4]arene tetraradical is ferromagnetic. The through-space exchange couplings are antiferromagnetic in both cone and 1,3-alternate calix[4]arene tetraradical, as well as in the 1,3-alternate calix[4]arene diradical. The exchange coupling constants (|J/k|) are of the order of 1 K.     

Bis-calix[4]arenes bridged by an electroactive tetrathiafulvalene unit

Syntheses of the first bis-calixarenes systems bridged by a tetrathiafulvalene (TTF) framework 5a,b have been carried out in good yields through triethyl phosphite-mediated dechalcogenation-dimerizations of the corresponding 1,3-dithiole-2-(thi)ones 3 or 4. X-ray structures of the calix[4]arene-TTF-calix[4]arene assembly 5b and of the calix[4]arene-thione intermediate 3b are analyzed and confirm the cone conformations adopted by the calix[4]arene parts, as it is also observed by (1)H NMR analysis of these systems. The solid-state organization in 5b leads to alternate layers of calixarene and TTF units. The cyclic voltammograms of 5a,b show as expected a two-step redox behavior but display a CV deformation for the second redox process.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

含席夫碱和酰胺单元的新型双杯[4]芳烃的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物2与对叔丁基杯[4]-1,3-二酰肼衍生物4在稀释条件下进行“1＋1”分子间缩合反应, 高产率地合成了含席夫碱和酰胺单元的新型双杯[4]芳烃衍生物5. 所有新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-桥联且采取锥式构象.     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.