Water‐Stable Zirconium‐Based Metal–Organic Framework Material with High‐Surface Area and Gas‐Storage Capacities

We designed, synthesized, and characterized a new Zr‐based metal–organic framework material, NU‐1100 , with a pore volume of 1.53 ccg^?1 and Brunauer–Emmett–Teller (BET) surface area of 4020 m²g^?1; to our knowledge, currently the highest published for Zr‐based MOFs. CH₄/CO₂/H₂ adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g^?1, which corresponds to 43 g L^?1. The volumetric and gravimetric methane‐storage capacities at 65 bar and 298 K are approximately 180 v_STP/v and 0.27 g g^?1, respectively.     

No More HF: Teflon‐Assisted Ultrafast Removal of Silica to Generate High‐Surface‐Area Mesostructured Carbon for Enhanced CO2 Capture and Supercapacitor Performance

An innovative technique to obtain high‐surface‐area mesostructured carbon (2545 m² g^?1) with significant microporosity uses Teflon as the silica template removal agent. This method not only shortens synthesis time by combining silica removal and carbonization in a single step, but also assists in ultrafast removal of the template (in 10 min) with complete elimination of toxic HF usage. The obtained carbon material (JNC‐1) displays excellent CO₂ capture ability (ca. 26.2 wt % at 0 °C under 0.88 bar CO₂ pressure), which is twice that of CMK‐3 obtained by the HF etching method (13.0 wt %). JNC‐1 demonstrated higher H₂ adsorption capacity (2.8 wt %) compared to CMK‐3 (1.2 wt %) at ?196 °C under 1.0 bar H₂ pressure. The bimodal pore architecture of JNC‐1 led to superior supercapacitor performance, with a specific capacitance of 292 F g^?1 and 182 F g^?1 at a drain rate of 1 A g^?1 and 50 A g^?1, respectively, in 1 m H₂SO₄ compared to CMK‐3 and activated carbon.     

A ferrocene‐containing porous organic polymer linked by tetrahedral silicon‐centered units for gas sorption

A novel ferrocene‐containing porous organic polymer (FPOP) has been prepared by Sonogashira‐Hagihara coupling reaction of 1,1′‐dibromoferrocene and tetrakis(4‐ethynylphenyl)silane. Compared with other polymers, the resulting polymer possesses excellent thermal stability with the decomposition temperature of 415°C and high porosity with Brunauer–Emmett–Teller (BET) surface area of 542 m² g^?1 as measured by nitrogen adsorption‐desoprtion isotherm at 77 K. For applications, it shows moderate carbon dioxide uptakes of up to 1.42 mmol g^?1 (6.26 wt%) at 273 K/1.0 bar and 0.82 mmol g^?1 (3.62 wt%) at 298 K/1.0 bar, and hydrogen capacity of up to 0.45 mmol g^?1 (0.91 wt%) at 77 K/1.0 bar, indicating that FPOP might be utilized as a promising candidate for storing carbon dioxide and hydrogen. Although FPOP possesses lower porosity than many porous polymers, the gas capacities are higher or comparable to them, thereby revealing that the incorporation of ferrocene units into the network is an effective strategy to enhance the affinity between the framework and gas.     

An Azine‐Linked Covalent Organic Framework: Synthesis,Characterization and Efficient Gas Storage

A azine‐linked covalent organic framework, COF‐JLU2, was designed and synthesized by condensation of hydrazine hydrate and 1,3,5‐triformylphloroglucinol under solvothermal conditions for the first time. The new covalent organic framework material combines permanent micropores, high crystallinity, good thermal and chemical stability, and abundant heteroatom activated sites in the skeleton. COF‐JLU2 possesses a moderate BET surface area of over 410 m² g^?1 with a pore volume of 0.56 cm³ g^?1. Specifically, COF‐JLU2 displays remarkable carbon dioxide uptake (up to 217 mg g^?1) and methane uptake (38 mg g^?1) at 273 K and 1 bar, as well as high CO₂/N₂ (77) selectivity. Furthermore, we further highlight that it exhibits a higher hydrogen storage capacity (16 mg g^?1) than those of reported COFs at 77 K and 1 bar.     

A Robust 3D Cage‐like Ultramicroporous Network Structure with High Gas‐Uptake Capacity

A three‐dimensional (3D) cage‐like organic network (3D‐CON) structure synthesized by the straightforward condensation of building blocks designed with gas adsorption properties is presented. The 3D‐CON can be prepared using an easy but powerful route, which is essential for commercial scale‐up. The resulting fused aromatic 3D‐CON exhibited a high Brunauer–Emmett–Teller (BET) specific surface area of up to 2247 m² g^?1. More importantly, the 3D‐CON displayed outstanding low pressure hydrogen (H₂, 2.64 wt %, 1.0 bar and 77 K), methane (CH₄, 2.4 wt %, 1.0 bar and 273 K), and carbon dioxide (CO₂, 26.7 wt %, 1.0 bar and 273 K) uptake with a high isosteric heat of adsorption (H₂, 8.10 kJ mol^?1; CH₄, 18.72 kJ mol^?1; CO₂, 31.87 kJ mol^?1). These values are among the best reported for organic networks with high thermal stability (ca. 600 °C).     

Density Functional Theory Study of Hydrogen Adsorption in a Ti‐Decorated Mg‐Based Metal–Organic Framework‐74

The Ti‐binding energy and hydrogen adsorption energy of a Ti‐decorated Mg‐based metal–organic framework‐74 (Mg‐MOF‐74) were evaluated by using first‐principles calculations. Our results revealed that only three Ti adsorption sites were found to be stable. The adsorption site near the metal oxide unit is the most stable. To investigate the hydrogen‐adsorption properties of Ti‐functionalized Mg‐MOF‐74, the hydrogen‐binding energy was determined. For the most stable Ti adsorption site, we found that the hydrogen adsorption energy ranged from 0.26 to 0.48 eV H₂^?1. This is within the desirable range for practical hydrogen‐storage applications. Moreover, the hydrogen capacity was determined by using ab initio molecular dynamics simulations. Our results revealed that the hydrogen uptake by Ti‐decorated Mg‐MOF‐74 at temperatures of 77, 150, and 298 K and ambient pressure were 1.81, 1.74, and 1.29 H₂ wt %, respectively.     

二维TiC 层表面H2的化学吸附与物理吸附

第一性原理计算研究发现由于二维TiC 单原子层具有高的比表面积与大量的暴露在表面的Ti 原子,其是一种非常有潜力的储氢材料. 计算结果显示H₂可以在二维TiC 单原子层表面进行物理吸附与化学吸附. 其中化学吸附能为每个氢分子0.36 eV,物理吸附能是每个氢分子0.09 eV. 覆盖度为1和1/4层（ML）时,H₂分子在二维TiC 单原子层表面的离解势垒分别为1.12 和0.33 eV. 因此,除了物理吸附与化学吸附,TiC 表面还存在H单原子吸附. 最大的H₂储存率可以达到7.69%（质量分数）. 其中,离解的H原子、化学吸附的H₂、物理吸附的H₂的储存率分别为1.54%、3.07%、3.07%. 符合Kubas吸附特征的储存率为3.07%. 化学吸附能随覆盖度的变化非常小,这有利于H₂分子的吸附与释放.     

A Novel Bismuth‐Based Metal–Organic Framework for High Volumetric Methane and Carbon Dioxide Adsorption

Solvothermal reaction of H₄L (L=biphenyl‐3,3′,5,5′‐tetracarboxylate) and Bi(NO₃)₃ ? (H₂O)₅ in a mixture of DMF/MeCN/H₂O in the presence of piperazine and nitric acid at 100 °C for 10 h affords the solvated metal–organic polymer [Bi₂(L)_1.5(H₂O)₂] ? (DMF)_3.5 ? (H₂O)₃ (NOTT‐220‐solv). A single crystal X‐ray structure determination confirms that it crystallises in space group P2/c and has a neutral and non‐interpenetrated structure comprising binuclear {Bi₂} centres bridged by tetracarboxylate ligands. NOTT‐220‐solv shows a 3,6‐connected network having a framework topology with a {4 ? 6²}₂{4² ? 6⁵ ? 8⁸}{6² ? 8} point symbol. The desolvated material NOTT‐220a shows exceptionally high adsorption uptakes for CH₄ and CO₂ on a volumetric basis at moderate pressures and temperatures with a CO₂ uptake of 553 g L^?1 (20 bar, 293 K) with a saturation uptake of 688 g L^?1 (1 bar, 195 K). The corresponding CH₄ uptake was measured as 165 V(STP)/V (20 bar, 293 K) and 189 V(STP/V) (35 bar, 293 K) with a maximum CH₄ uptake for NOTT‐220a recorded at 20 bar and 195 K to be 287 V(STP)/V, while H₂ uptake of NOTT‐220a at 20 bar, 77 K is 42 g L^?1. These gas uptakes have been modelled by grand canonical Monte Carlo (GCMC) and density functional theory (DFT) calculations, which confirm the experimental data and give insights into the nature of the binding sites of CH₄ and CO₂ in this porous hybrid material.     

Octa[4‐(9‐carbazolyl)phenyl]silsesquioxane‐Based Porous Material for Dyes Adsorption and Sensing of Nitroaromatic Compounds

A new fluorescent hybrid porous polymer (HPP) is synthesized by an anhydrous FeCl₃‐mediated oxidative coupling reaction of octa[4‐(9‐carbazolyl)phenyl]silsesquioxane (OCPS). The polymer possesses a surface area of 1741 m² g^?1 and hierarchical bimodal micropores (1.41 and 1.69 nm) and mesopores (2.65 nm). The material serves as an excellent adsorbent for CO₂ and dyes with high adsorption capacity for CO₂ (8.53 wt %,1.94 mmol g^?1), congo red (1715 mg g^?1) and rhodamine B (1501 mg g^?1). In addition, the presence of peripheral cabozolyl groups with extended π‐conjugation in the crosslinked framework imparts luminescent character to the polymer and offers the detection of nitroaromatic compounds.     

Hyper-cross-linked polymers based on triphenylsilane for hydrogen storage and water treatment

The present research focuses on the synthesis and applications of a series of hyper-cross-linked polymer networks obtained from the one-step Friedel–Crafts reaction of triphenylsilane and formaldehyde dimethyl acetal. The materials were characterized through FTIR, ¹³C NMR, PXRD, TGA, N₂ adsorption-desorption isotherms, H₂ sorption and dye adsorption. These materials exhibited increased surface areas of approximately 441–1101 m² g^?1 with increasing ratio of monomer to cross-linker. The H₂ storage capacity of the polymer networks reached 1.19 wt % (5.96 mmol g^?1) under 1.03 bar and 77.3 K. In addition, the material showed excellent adsorption capacity of 806 mg g^?1 for Congo Red and retained their adsorption capacity after recycling nine times. Taken together, the results demonstrate that the obtained hyper-cross-linked polymers could be applied to H₂ storage and water treatment.     

A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Effective removal of 2,4,6‐trinitrophenol over hexagonal metal–organic framework NH2‐MIL‐88B(Fe)

A nanostructured organic–inorganic framework, hexagonal NH₂‐MIL‐88B, has been prepared through a facile one‐pot reflux reaction and then it was characterized using various techniques. The as‐prepared sample with high specific surface area (414 m² g^?1) showed excellent adsorption for 2,4,6‐trinitrophenol (TNP) in the liquid phase. Detailed studies of the adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were conducted. The adsorption mechanism of NH₂‐MIL‐88B for TNP may be ascribed to hydrogen bond interaction, and the complexation between ─OH in TNP and unsaturated Fe(III) on the surface of NH₂‐MIL‐88B. The maximum adsorption capacity of NH₂‐MIL‐88B for TNP based on the Langmuir isotherm was 163.66 mg g^?1. The as‐prepared NH₂‐MIL‐88B adsorbent seems to be a promising material in practice for TNP removal from aqueous solution.     

Structural analysis of interpenetrated methyl‐modified MOF‐5 and its gas‐adsorption properties

The first example of an interpenetrated methyl‐modified MOF‐5 with the formula Zn₄O(DMBDC)₃(DMF)₂, where DMBDC^2? is 2,5‐dimethylbenzene‐1,4‐dicarboxylate and DMF is N,N‐dimethylformamide (henceforth denoted as Me₂MOF‐5‐int ), namely, poly[tris(μ₄‐2,5‐dimethylbenzene‐1,4‐dicarboxylato)bis(N,N‐dimethylformamide)‐μ₄‐oxido‐tetrazinc(II)], [Zn₄(C₁₀H₈O₄)₃O(C₃H₇NO)₂]_n, has been obtained from a solvothermal synthesis of 2,5‐dimethylbenzene‐1,4‐dicarboxylic acid and Zn(NO₃)₂·6H₂O in DMF. A systematic study revealed that the choice of solvent is of critical importance for the synthesis of phase‐pure Me₂MOF‐5‐int , which was thoroughly characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as by gas‐adsorption analyses. The Brunauer–Emmett–Teller surface area of Me₂MOF‐5‐int (660 m² g^?1), determined by N₂ adsorption, is much lower than that of nonpenetrated Me₂MOF‐5 (2420 m² g^?1). However, Me₂MOF‐5‐int displays an H₂ uptake capacity of 1.26 wt% at 77 K and 1.0 bar, which is comparable to that of non‐interpenetrated Me₂MOF‐5 (1.51 wt%).     

A Flexible Pro‐porous Coordination Polymer: Non‐conventional Synthesis and Separation Properties Towards CO2/CH4 Mixtures

The novel coordination polymers [Cu(Hoxonic)(H₂O)]_n ( 1 ) and [Cu(Hoxonic)(bpy)_0.5]_n ? 1.5 n H₂O ( 2?H₂O ) (H₃oxonic: 4,6‐dihydroxy‐1,3,5‐triazine‐2‐carboxylic acid; bpy: 4,4′‐bipyridine) have been isolated and structurally characterised by ab initio X‐ray powder diffraction. The dense phase 1 contains 1D zig‐zag chains in which Hoxonic dianions bridge square‐pyramidal copper(II) ions, apically coordinated by water molecules. On the contrary, 2?H₂O , prepared by solution and solventless methods, is based on 2D layers of octahedral copper(II) ions bridged by Hoxonic ligands, further pillared by bpy spacers. The resulting pro‐porous 3D network possesses small hydrated cavities. The reactivity, thermal, magnetic and adsorptive properties of these materials have been investigated. Notably, the adsorption studies on 2 show that this material possesses unusual adsorption behaviour. Indeed, guest uptake is facilitated by increasing the thermal energy of both the guest and the framework. Thus, neither N₂ at 77 K nor CO₂ at 195 K are incorporated, and CH₄ is only minimally adsorbed at 273 K and high pressures (0.5 mmol g^?1 at 2500 kPa). By contrast, CO₂ is readily incorporated at 273 K (up to 2.5 mmol g^?1 at 2500 kPa). The selectivity of 2 towards CO₂ over CH₄ has been investigated by means of variable‐temperature zero coverage adsorption experiments and measurement of breakthrough curves of CO₂/CH₄ mixtures. The results show the highly selective incorporation of CO₂ in 2 , which can be rationalised on the basis of the framework flexibility and polar nature of its voids.     

Subnano‐Sized Pt–Au Alloyed Clusters as Enhanced Cocatalyst for Photocatalytic Hydrogen Evolution

Photocatalytic water splitting for H₂ evolution is regarded as the most promising way to overcome the energy and environmental crisis. Pt clusters as a cocatalyst can efficiently enhance the performance of H₂ generation in most photocatalysts, but the activity is still unsatisfied. By tuning the electronic structures of materials, one can develop catalysts with enhanced activity. Here we synthesize a Pt–Au alloy with subnano size as cocatalyst on TiO₂ nanosheets for photocatalytic H₂ generation that shows an outstanding activity with a H₂ generation rate of 80.1 μmol h^?1 for at least 100 h. The activity is twice than the pure Pt cocatalyst, mainly because the optimized hydrogen adsorption energy on Pt cluster is tuned by Au atoms.     

Thermodynamics of Hydrogen Adsorption on Metal‐Organic Frameworks

Interaction between adsorbed hydrogen and the coordinatively unsaturated Mg²⁺ and Co²⁺ cationic centres in Mg‐MOF‐74 and Co‐MOF‐74, respectively, was studied by means of variable‐temperature infrared (VTIR) spectroscopy. Perturbation of the H₂ molecule by the cationic adsorbing centre renders the H? H stretching mode IR‐active at 4088 and 4043 cm^?1 for Mg‐MOF‐74 and Co‐MOF‐74, respectively. Simultaneous measurement of integrated IR absorbance and hydrogen equilibrium pressure for spectra taken over the temperature range of 79–95 K allowed standard adsorption enthalpy and entropy to be determined. Mg‐MOF‐74 showed ΔH⁰=?9.4 kJ mol^?1 and ΔS⁰=?120 J mol^?1 K^?1, whereas for Co‐MOF‐74 the corresponding values of ΔH⁰=?11.2 kJ mol^?1 and ΔS⁰=?130 J mol^?1 K^?1 were obtained. The observed positive correlation between standard adsorption enthalpy and entropy is discussed in the broader context of corresponding data for hydrogen adsorption on cation‐exchanged zeolites, with a focus on the resulting implications for hydrogen storage and delivering.     

Computational design of tetrahedral silsesquioxane-based porous frameworks with diamond-like structure as hydrogen storage materials

A novel type of three-dimensional (3D) tetrahedral silsesquioxane-based porous frameworks (TSFs) with diamond-like structure was computationally designed using the density functional theory (DFT) and classical molecular mechanics (MM) calculations. The hydrogen adsorption and diffusion properties of these TSFs were evaluated by the methods of grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations. The results reveal that all designed materials possess extremely high porosity (87–93 %) and large H₂ accessible surface areas (5,268–6,544 m² g^?1). Impressively, the GCMC simulation results demonstrate that at 77 K and 100 bar, TSF-2 has the highest gravimetric H₂ capacity of 29.80 wt%, while TSF-1 has the highest volumetric H₂ uptake of 65.32 g L^?1. At the same time, the gravimetric H₂ uptake of TSF-2 can reach up to 4.28 wt% at the room temperature. The extraordinary performances of these TSF materials in hydrogen storage made them enter the rank of the top hydrogen storage materials so far.     

Carbon‐Dot‐Sensitized,Nitrogen‐Doped TiO2 in Mesoporous Silica for Water Decontamination through Nonhydrophobic Enrichment–Degradation Mode

Mesoporous silica synthesized from the cocondensation of tetraethoxysilane and silylated carbon dots containing an amide group has been adopted as the carrier for the in situ growth of TiO₂ through an impregnation–hydrothermal crystallization process. Benefitting from initial complexation between the titania precursor and carbon dot, highly dispersed anatase TiO₂ nanoparticles can be formed inside the mesoporous channel. The hybrid material possesses an ordered hexagonal mesostructure with p6mm symmetry, a high specific surface area (446.27 m² g^?1), large pore volume (0.57 cm³ g^?1), uniform pore size (5.11 nm), and a wide absorption band between λ=300 and 550 nm. TiO₂ nanocrystals are anchored to the carbon dot through Ti?O?N and Ti?O?C bonds, as revealed by X‐ray photoelectron spectroscopy. Moreover, the nitrogen doping of TiO₂ is also verified by the formation of the Ti?N bond. This composite shows excellent adsorption capabilities for 2,4‐dichlorophenol and acid orange 7, with an electron‐deficient aromatic ring, through electron donor–acceptor interactions between the carbon dot and organic compounds instead of the hydrophobic effect, as analyzed by the contact angle analysis. The composite can be photocatalytically recycled through visible‐light irradiation after adsorption. The narrowed band gap, as a result of nitrogen doping, and the photosensitization effect of carbon dots are revealed to be coresponsible for the visible‐light activity of TiO₂. The adsorption capacity does not suffer any clear losses after being recycled three times.     

A Non‐Enzymatic Hydrogen Peroxide Sensor Based on Ag/MnOOH Nanocomposites

A novel non‐enzymatic sensor based on Ag/MnOOH nanocomposites was developed for the detection of hydrogen peroxide (H₂O₂). The H₂O₂ sensor was fabricated by immobilizing Ag/MnOOH nanocomposites on a glassy carbon electrode (GCE). The morphology and composition of the sensor surface were characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscopy and X‐ray diffraction spectroscopy. The electrochemical investigation of the sensor indicates that it possesses an excellent electrocatalytic property for H₂O₂, and could detect H₂O₂ in a linear range from 5.0 µM to 12.8 mM with a detection limit of 1.5 µM at a signal‐to‐noise ratio of 3, a response time of 2 s and a sensitivity of 32.57 µA mM^?1 cm^?2. Additionally, the sensor exhibits good anti‐interference. The good analytical performance, low cost and straightforward preparation method made this novel electrode material promising for the development of effective non‐enzymatic H₂O₂ sensor.     

Porphyrin‐based covalent triazine frameworks: Porosity,adsorption performance,and drug delivery

Two porous porphyrin‐based covalent triazine frameworks (PCTFs), in which porphyrin is incorporated as building block, have been synthesized by the Friedel–Crafts reaction. The copolymer PCTFs show large Brunauer–Emmett–Teller specific surface area of up to 1089 m² g^?1, high CO₂ uptake capacity reaching 139.9 mg g^?1 at 273 K/1.0 bar, and good selectivity for CO₂/CH₄ adsorption attaining 6.1 at 273 K/1.0 bar. The resulting porous solids also can be used as matrices for drug delivery of ibuprofen in vitro. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2594–2600