A universal blown film apparatus for <Emphasis Type="Italic">in situ</Emphasis> X-ray measurements

A setup of blown film machine combined with in situ synchrotron radiation X-ray diffraction measurements and infrared temperature testing is reported to study the structure evolution of polymers during film blowing. Two homemade auto-lifters are constructed and placed under the blown machine at each end of the beamline platform which move up and down with a speed of 0.05 mm/s bearing the 200 kg weight machine. Therefore, structure development and temperature changes as a function of position on the film bubble can be obtained. The blown film machine is customized to be conveniently installed with precise servo motors and can adjust the processing parameters in a wide range. Meanwhile, the air ring has been redesigned in order to track the structure information of the film bubble immediately after the melt being extruded out from the die exit. Polyethylene (PE) is selected as a model system to verify the feasibility of the apparatus and the in situ experimental techniques. Combining structure information provided by the WAXD and SAXS and the actual temperature obtained from the infrared probe, a full roadmap of structure development during film blowing is constructed and it is helpful to explore the molecular mechanism of structure evolution behind the film blowing processing, which is expected to lead to a better understanding of the physics in polymer processing.     

XPS for <Emphasis Type="Italic">in situ</Emphasis> study of the mechanisms of heterogeneous catalytic reactions

The possibility to use X-ray photoelectron spectroscopy (XPS) for in situ studies of the mechanisms of heterogeneous catalytic reactions over the pressure range from ultrahigh vacuum to 100 mbar is considered. The application of this method to investigation of CO adsorption and hydrogenation as well as kinetics and mechanism of methanol transformation on the palladium surface at pressures of 10^?6 mbar to 0.1 mbar is reported.     

<Emphasis Type="Italic">In situ</Emphasis> XPS study of InAs oxidation in glow-discharge plasma

This is the first in situ XPS study of the InAs oxidation kinetics in glow-discharge plasma in the atmosphere of O₂ and CO₂ gases and in a mixture of O₂ and NF₃ gases. Chemical composition of the oxide films produced by cathodic and anodic polarization of samples was examined. Main regularities and features of the oxide film formation on the InAs surface in the normal and dark glow discharge modes were revealed. Normal glow discharge in oxygen-containing plasma was shown to form bilayer oxide films on the InAs surface. The bottom layer with thickness of some nanometers, which consists of arsenic and indium oxides, forms at the initial oxidation steps, its thickness remaining virtually unchanged. The upper layer consists of Al₂O₃ produced by sputtering of cathode material; it serves as a barrier to oxygen diffusion, its thickness building up linearly with the treatment time in glow-discharge plasma. Chemical composition of the growing proper InAs oxide film and the stoichiometry of subsurface region of a semiconductor substrate strongly depend on the oxidation process parameters. The obtained regularities are discussed.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

<Emphasis Type="Italic">In situ</Emphasis> synthesis of block copolymer nano-assemblies by polymerization-induced self-assembly under heterogeneous condition

Controlled synthesis of amphiphilic block copolymer nanoparticles in a convenient way is an important and interest topic in polymer science. In this review, three formulations of polymerization-induced self-assembly to in situ synthesize block copolymer nanoparticles are briefly introduced, which perform by reversible addition-fragmentation chain transfer (RAFT) polymerization under heterogeneous conditions, e.g., aqueous emulsion RAFT polymerization, dispersion RAFT polymerization and especially the recently proposed seeded RAFT polymerization. The latest developments in several selected areas on the synthesis of block copolymer nano-assemblies are highlighted.     

Towards the optimization of carbon nanotube properties via <Emphasis Type="Italic">in situ</Emphasis> and <Emphasis Type="Italic">ex situ</Emphasis> studies of the growth mechanism

The synthesis conditions of multi-walled carbon nanotubes (MWCNTs) indirectly determine their application potential through the decisive role in the characteristics of individual tubes: diameter distribution, structure and defectiveness of graphene walls, the amount of metal impurities and amorphous carbon. In the present work, we have studied the influence of the catalyst composition and synthesis conditions on the diameter distribution and the structure of nanotube walls. We have observed the influence of the particle size for MWCNT synthesis (i.e. size effect) on catalytic activity by ex situ and in situ techniques: in situ X-ray diffraction on synchrotron radiation (SRXRD), gas chromatography, and ex situ transmission electron microscopy. The data obtained by in situ SRXRD are in agreement with the results collected using laboratory tubular fix-bed catalytic reactor allowing thereby extending the applicability of the approach. For the first time we have shown the increase of the fraction of graphene walls in the total MWCNT diameter with time.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

Analysis of <Emphasis Type="Italic">Escherichia coli</Emphasis> nicotinate mononucleotide adenylyltransferase mutants <Emphasis Type="Italic">in vivo</Emphasis> and <Emphasis Type="Italic">in vitro</Emphasis>

Background  

Adenylation of nicotinate mononucleotide to nicotinate adenine dinucleotide is the penultimate step in NAD⁺ synthesis. In Escherichia coli, the enzyme nicotinate mononucleotide adenylyltransferase is encoded by the nadD gene. We have earlier made an initial characterization in vivo of two mutant enzymes, NadD72 and NadD74. Strains with either mutation have decreased intracellular levels of NAD⁺, especially for one of the alleles, nadD72.     

Molecular structure of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">o</Emphasis>-and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzyl)cytisine

The molecular structures of N-(o-and p-hydroxybenzyl)cytisine were investigated by NMR spectroscopy, x-ray structure analysis, and molecular modeling. It was found that NMR resonances of the OH and aromatic protons in N-(o-hydroxybenzyl)cytisine were doubled because of the presence of two conformers in solution. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 165–168, March–April, 2008.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

An Improved Stereocontrolled Route to <Emphasis Type="Italic">cis</Emphasis>-Erythrinanes by Combined Intramolecular <Emphasis Type="Italic">Strecker</Emphasis> and <Emphasis Type="Italic">Bruylants</Emphasis> Reaction

Summary. Condensation of (2-iodophenyl)ethylamines with cyclohexanoylacetaldehyde provided the corresponding aldimines which were reduced yielding secondary phenethylcyclohexanoylethylamines. These in turn were appropriate intermediates to prepare several erythrinanes by a sequential intramolecular Strecker and intramolecular Bruylants reaction. In contrast, the C-ring homologue schelhammeranes were not available on this route.Part of PhD thesis, LMU München, D     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.     

Synthesis of <Emphasis Type="Italic">N,N</Emphasis>-disubstituted (<Emphasis Type="Italic">Z</Emphasis>)-<Emphasis Type="Italic">O</Emphasis>-methylnicotinamide oximes

A number of (Z)-N,N-dialkyl- and (Z)-N-acyl-N-alkyl-O-methylnicotinamide oximes was synthesized. Their configuration was confirmed by the NOESY experiment. Evaluation of fungicidal activity of compounds obtained was performed.     

Effect of the structure of the <Emphasis Type="Italic">ortho</Emphasis>, <Emphasis Type="Italic">meta</Emphasis>, and <Emphasis Type="Italic">para</Emphasis> isomers of perhydroterphenyl on their reactivity in heterogeneous catalytic dehydrogenation

The kinetics of the dehydrogenation of the individual ortho, meta, and para isomers of perhydroterphenyl and their mixtures over a (3 wt % Pt)/C catalyst has been investigated in a flow reactor at 280–340°C. The rate of the isomerization of the stereoisomers of the initial substrate (perhydroterphenyl) and terphenyl dehydrogenation products has an effect on the hydrogen release kinetics. The highest reactivity in isomerization is shown by the ortho isomer. The largest amount of hydrogen (7.0 wt %) is released in the dehy-drogenation of perhydro-meta-terphenyl and perhydro-para-terphenyl, whose conversion at 320°C is 96%.     

Synthesis of <Emphasis Type="Italic">o</Emphasis>(<Emphasis Type="Italic">m</Emphasis>)-carborane-containing azomethines

A method of preparative synthesis of o(m)-carborane-containing azomethines via the condensation of o(m)-carboranyl-C-methylene-4-formylbenzoates with aliphatic, cycloaliphatic, and aromatic amines was developed.