采用银纳米圆盘阵列提高LED发光特性的研究

为了提高GaN基蓝光LED的发光效率,设计了在LED有源层上方引入银纳米圆盘阵列的模型。利用时域有限差分方法计算了银纳米圆盘阵列不同结构参数情况下LED有源层自发辐射率的变化情况及光提取效率值。通过对有源区的近场分布和LED远场方向性的分析,理论上解释了利用该金属纳米结构生成的表面等离激元对LED性能增强的影响,利用该模型可使得表面等离激元与有源层有效耦合,从而增强有源层的自发辐射率。此外,银纳米粒子组成的阵列结构所生成的栅格矢量可以补偿表面等离激元的波矢量,从而可将局域化表面等离激元转为辐射性表面等离激元,显著提高LED顶端光提取效率。结果表明,当银纳米圆盘颗粒满足直径为120nm,厚度为30nm时,含该结构的GaN基蓝光LED自发辐射率比普通LED增强了3.6倍。在此基础上,当其按照晶格常数为220nm的三角晶格排列时,顶端光提取效率增强为2.5倍。这些结果为实际的高性能GaN基LED的设计与优化提供了一定的参考。     

纳米柱高度对GaN基绿光LED光致发光谱的影响

纳米柱结构是释放高In组分InGaN/GaN绿光LED量子阱层应变的有效方法。本文采用自组装的聚苯乙烯微球掩模、感应耦合等离子体干法刻蚀和KOH溶液的湿法腐蚀,在GaN基绿光LED外延片上制备了3种高度的纳米柱结构,通过扫描电子显微镜观察纳米柱结构的形貌,并测试了常温和10 K低温时的光致发光谱(PL)。结果表明:应变释放对压电场的影响显著,使得纳米柱结构样品的内量子效率(IQE)提高,PL谱峰值波长蓝移;应变在量子阱中的不均匀分布还使得PL谱半高全宽(FWHM)展宽。与普通平面结构相比,高度为747 nm的纳米柱结构可使得IQE提升917%,PL谱峰值波长蓝移18 nm、FWHM展宽7 nm。另外,纳米柱结构样品的有源区有效面积减小可使得PL谱FWHM减小。     

纳米折叠InGaN/GaN LED材料生长及器件特性

在以自组织Ni纳米岛为掩膜制作的n-GaN纳米柱上,利用MOCVD方法外延生长了具有折叠InGaN/GaN多量子阱(MQW)的LED结构外延片,进而制作了LED器件.外延片上中下游的光致荧光测试,结果表明外延片具有很好的均匀性.用该外延片制作的LED的电致发光谱,随注入电流增加没有明显蓝移,这表明纳米结构能更好地释放应力,纳米柱上外延生长的多量子阱,具有较低的压电极化电场.正向工作电流20 mA时,LED器件的工作电压为4.6 V. 关键词： 纳米柱LED 光致发光 电致发光     

In组分渐变提高InGaN/GaN多量子阱发光二极管发光性能

利用金属有机物化学气相沉积系统在蓝宝石衬底上通过有源层的变温生长,得到In组分渐变的量子阱结构,从而获得具有三角形能带结构的InGaN/GaN多量子阱发光二极管(LED)(简称三角形量子阱结构LED).变温光致发光谱结果表明,相对于传统具有方形能带结构的量子阱LED(简称方形量子阱结构LED),三角形量子阱结构有效提高了量子阱中电子和空穴波函数的空间交叠,从而增加了LED的内量子效率;电致发光谱结果表明,三角形量子阱结构LED器件与传统结构LED器件相比,明显改善了发光峰值波长随着电流的蓝移现象.通过以上     

硅基纳米柱GaN-LED的制备与光谱特性分析

Ⅲ-Ⅴ族氮化物发光二极管因具有寿命长、尺寸小、高效、节能等优点,得到广泛的研究与应用。随着光通信、万物互联等领域的进一步发展,需要开发高质量的微纳光源和微纳光波导。纳米柱氮化镓发光二级管(GaN-LED)是一种重要的微纳光源,具有广阔的应用前景。另一方面,作为应用最广的硅半导体材料本身并不是直接半导体,发光效率低下而不能作为光源使用。因此,研究基于硅基板的纳米柱GaN-LED微纳光源具有非常重要的意义。采用射频分子束外延技术（MBE）在Si基板上沉积并生长具有GaN缓冲层、Si掺杂的n-GaN层、4个周期的InGaN/GaN量子阱层和Mg掺杂的p-GaN层的GaN基PN结构。利用扫描电子显微镜（SEM）观察其表面和侧面形貌,可观察到以一定的倾斜角度生长于衬底表面、排列紧密且整齐的纳米柱。利用微纳加工技术制备纳米柱GaN-LED,对已获得的纳米柱外延片进行SOG填充、FAB刻蚀,在p-GaN层和Si衬底侧蒸镀电极,并对LED两电极施加直流电压,进行I/V曲线和电致发光（EL）特性的测试。纳米柱GaN-LED的阈值电压为1.5 V,在室温下的峰值波长为433 nm。纳米柱结构可有效减小LED的阈值,在相同电压情况下,纳米柱LED的亮度更高,展现了良好的发光特性。GaN纳米材料与体材料相比,纳米结构中存在应力弛豫可以有效地降低位错密度,尺寸小于光生载流子或激子的扩散长度,因而能够减小光电子器件激活层中的局域化效应。通过TCAD仿真,对与实验结构相同的纳米柱GaN-LED两电极分别施加5,6和7 V的电压,可得到纳米柱LED的发光光谱。仿真结果显示纳米柱GaN-LED的发光波长在414～478 nm之间,发光颜色为天青蓝到蓝紫色之间,峰值波长为442 nm,发出鲜亮蓝色的光,与实验获得的EL光谱结果相近。随电压增大,发光光谱峰值波长减小,出现轻微的峰值波长蓝移。在纳米柱结构中InGaN/GaN区域产生强烈的极化效应,纳米柱结构在量子阱区域的载流子浓度增加,削弱了量子限制斯塔克效应,从而使LED波长峰值向高频率移动即蓝移。其次,纳米柱结构能够引起应力释放,也会引起峰值波长蓝移。     

顶端ZnO纳米结构对GaN基LED光提取效率的影响

为了提高GaN基蓝光LED的光提取效率,本文建立了LED顶面分别铺设ZnO纳米柱和纳米锥结构的两种模型,利用时域有限差分法对两种模型进行仿真并对结果进行了比较.仿真结果表明,ZnO纳米结构的各项几何结构参量(包括排列周期P、高度L、宽度W以及斜率k等),对LED顶端光提取效率影响显著.仿真分别得到了两种结构的最佳模型,通过比较,LED顶面纳米柱和纳米锥结构对光提取效率的提高效果相近,其最佳提取效率分别增强至无任何结构时的2.5倍和2.3倍.同时,通过对各项参量扫描获得的对光提取效率的变化曲线进行了分析,并给出了相应相应的理论解释.这些模型优化和理论分析对实际的高性能GaN基LED的设计制造有着指导意义.     

顶端ZnO纳米结构对GaN基LED光提取效率的影响

为了提高GaN基蓝光LED的光提取效率,本文建立了LED顶面分别铺设ZnO纳米柱和纳米锥结构的两种模型,利用时域有限差分法对两种模型进行仿真并对结果进行了比较.仿真结果表明,ZnO纳米结构的各项几何结构参量(包括排列周期P、高度L、宽度W以及斜率k等),对LED顶端光提取效率影响显著.仿真分别得到了两种结构的最佳模型,通过比较,LED顶面纳米柱和纳米锥结构对光提取效率的提高效果相近,其最佳提取效率分别增强至无任何结构时的2.5倍和2.3倍.同时,通过对各项参量扫描获得的对光提取效率的变化曲线进行了分析,并给出了相应相应的理论解释.这些模型优化和理论分析对实际的高性能GaN基LED的设计制造有着指导意义.     

GaN基高压直流发光二极管制备及其性能分析

GaN基高压直流发光二极管工艺制备, 采用蓝宝石图形衬底(PSS) 外延片制备正梯形芯粒结构的GaN基高压直流LED.相对其他结构器件, 该结构器件发光效率最高, 封装白光后, 在色温4500 K, 驱动电流20 mA时, 光效116.06 lm/W, 对应电压50 V. 测试其I-V曲线表明, 开启电压为36 V, 对应驱动电流为1.5 mA; 在电流15 mA至50 mA时, 光功率随驱动电流增加近似于线性增加, 在此区域光效随电流增加而降低的幅度比较缓慢, 表明GaN基高压直流LED适宜于采用大电流密度驱动, 而不会出现驱动电流密度增加导致量子效率明显下降(efficiency droop), 为从芯片层面研究解决量子效率下降难题提供了一种新思路.     

高效InGaN/AlInGaN发光二极管的结构设计及其理论研究（英文）

利用Advanced Physical Models of Semiconductor Devices(APSYS)理论对比研究了InGaN/AlInGaN和InGaN/GaN多量子阱作为有源层的InGaN基发光二极管的结构和电学特性。与InGaN/GaN基LED中GaN作为垒层材料相比,在AlInGaN材料体系中,通过调节AlInGaN中Al和In的组分可以优化器件的性能。当InGaN阱层材料中In组分为8%时,可以实现无应力的In0.08Ga0.92N/AlInGaN基LED。在这种无应力结构中可以进一步降低大功率LED的"效率下降"(Effciency droop)问题。理论模拟结果显示,四元系AlInGaN作为垒层可以进一步减少载流子泄露,增加空穴注入效率,减少极化场对器件性能的影响。在In0.08Ga0.92N/AlInGaN量子阱中的载流子浓度、有源层的辐射复合率、电流特性曲线和内量子效率等方面都优于InGaN/GaN基LED。无应变AlInGaN垒层代替传统的GaN垒层后,能够得到高效的发光二极管,并且大电流注入下的"效率滚降"问题得到改善。     

高效InGaN/AlInGaN发光二极管的结构设计及其理论研究

利用Advanced Physical Models of Semiconductor Devices (APSYS)理论对比研究了InGaN/AlInGaN 和 InGaN/GaN多量子阱作为有源层的InGaN基发光二极管的结构和电学特性。与InGaN/GaN 基LED 中GaN作为垒层材料相比,在AlInGaN材料体系中,通过调节AlInGaN中Al和In的组分可以优化器件的性能。当InGaN阱层材料中In组分为8%时,可以实现无应力的In_0.08Ga_0.92N/AlInGaN基 LED。在这种无应力结构中可以进一步降低大功率LED的"效率下降"(Effciency droop)问题。理论模拟结果显示,四元系AlInGaN作为垒层可以进一步减少载流子泄露,增加空穴注入效率,减少极化场对器件性能的影响。在In_0.08Ga_0.92N /AlInGaN量子阱中的载流子浓度、有源层的辐射复合率、电流特性曲线和内量子效率等方面都优于InGaN/GaN基LED。无应变AlInGaN垒层代替传统的GaN垒层后,能够得到高效的发光二极管,并且大电流注入下的"效率滚降"问题得到改善。     

Effects of a prestrained InGaN interlayer on the emission properties of InGaN/GaN multiple quantum wells in a laser diode structure

The electroluminescence (EL) and photoluminescence (PL) spectra of InGaN/GaN multiple quantum wells (MQWs) with a prestrained InGaN interlayer in a laser diode structure are investigated. When the injection current increases from 5 mA to 50 mA, the blueshift of the EL emission peak is 1 meV for the prestrained sample and 23 meV for a control sample with the conventional structure. Also, the internal quantum efficiency and the EL intensity at the injection current of 20 mA are increased by 71% and 65% respectively by inserting the prestrained InGaN interlayer. The reduced blueshift and the enhanced emission are attributed mainly to the reduced quantum-confined Stark effect (QCSE) in the prestrained sample. Such attributions are supported by the theoretical simulation results, which reveal the smaller piezoelectric field and the enhanced overlap of electron and hole wave functions in the prestrained sample. Therefore, the prestrained InGaN interlayer contributes to strain relaxation in the MQW layer and enhancement of light emission due to the reduction of QCSE.     

Effect of annealing on photoluminescence and microstructures of InGaN／GaN multi-quantum well with Mg-doped p-type GaN

InGaN/GaN multi-quantum well structure with Mg-doped p-type GaN was grown by low-pressure metalorganic vapour phase epitaxy. After rapid-thermal-annealing at 700 and 900${^\circ}$C, both the red-shift and the blue-shift of the photoluminescence (PL) peak, the decreased and the enhancement of the PL intensity were observed. The transmission electron microscopic images showed that InGaN multi-quantum-dots-like (MQD-like) structures with dimensions less than 5$\tm$10nm were formed in InGaN wells. The changes of PL spectra could be tentatively attributed to the competition between the red-shift mechanism of the quantum-confined Stark effect and the blue-shift mechanism of the quantum size effect due to MQD-like structures.     

Efficiency droop alleviation in blue light emitting diodes using the InGaN/GaN triangular-shaped quantum well

The InGaN/GaN blue light emitting diode(LED) is numerically investigated using a triangular-shaped quantum well model,which involves analysis on its energy band,carrier concentration,overlap of electron and hole wave functions,radiative recombination rate,and internal quantum efficiency.The simulation results reveal that the InGaN/GaN blue light emitting diode with triangular quantum wells exhibits a higher radiative recombination rate than the conventional light emitting diode with rectangular quantum wells due to the enhanced overlap of electron and hole wave functions(above 90%) under the polarization field.Consequently,the efficiency droop is only 18% in the light emitting diode with triangular-shaped quantum wells,which is three times lower than that in a conventional LED.     

Droop improvement in blue InGaN light-emitting diodes with GaN/InGaN superlattice barriers

GaN/InGaN superlattice barriers are used in InGaN-based light-emitting diodes （LEDs）. The electrostatic field in the quantum wells, electron hole wavefunction overlap, carrier concentration, spontaneous emission spectrum, light-current performance curve, and internal quantum efficiency are numerically investigated using the APSYS simulation software. It is found that the structure with GaN/InGaN superlattice barriers shows improved light output power, and lower current leakage and efficiency droop. According to our numerical simulation and analysis, these improvements in the electrical and optical characteristics are mainly attributed to the alleviation of the electrostatic field in the active region.     

具有三角形InGaN/GaN多量子阱的高内量子效率的蓝光LED(英文)

对InGaN量子阱LED的内量子效率进行了优化研究。分别对发光光谱、量子阱中的载流子浓度、能带分布、静电场和内量子效应进行了理论分析。对具有不同量子阱数量的InGaN/GaN LED进行了理论数值比对研究。研究结果表明,对于传统结构的LED而言,2个量子阱的结构相对于5个和7个量子阱具有更好的光学性能。同时还研究了具有三角形量子阱结构的LED,研究结果显示,三角形多量子阱结构具有较高的电致发光强度、更高的内量子效率和更好的发光效率,所有的优点都归因于较高的电子-空穴波函数重叠率和低的Stark效应所产生的较高的载流子输入效率和复合发光效率。     

Photoluminescence properties of blue and green multiple InGaN/GaN quantum wells

The photoluminescence(PL) properties of blue multiple InGaN/GaN quantum well(BMQW) and green multiple InGaN/GaN quantum well(GMQW) formed on a single sapphire substrate are investigated. The results indicate that the peak energy of GMQW-related emission(PG) exhibits more significant "S-shaped" dependence on temperature than that of BMQW-related emission(PB), and the excitation power-dependent carrier-scattering effect is observed only in the PG emission; the excitation power-dependent total blue-shift(narrowing) of peak position(line-width) for the PGemission is more significant than that for the PBemission; the GMQW shows a lower internal quantum efficiency than the BMQW. All of these results can be attributed to the fact that the GMQW has higher indium content than the BMQW due to its lower growth temperature and late growth, and the higher indium content in the GMQW induces a more significant compositional fluctuation, a stronger quantum confined Stark effect, and more non-radiative centers.     

蓝光激光器结构中InGaN/GaN多量子阱界面效应的精细光致发光光谱研究

金属有机化学气相沉积(MOCVD)方法制备InGaN/GaN多量子阱结构时,在GaN势垒层生长的N2载气中引入适量H2,能够有效改善阱/垒界面质量从而提升发光效率.本工作利用光致发光(PL)光谱技术,对蓝光激光器结构中的InGaN/GaN多量子阱的发光性能进行了精细的光谱学测量与表征,研究了通H2生长对量子阱界面的调控...     

Enhancement of light-emission efficiency of ultraviolet InGaN/GaN multiple quantum well light emitting diode with InGaN underlying layer

Two ultraviolet InGaN/GaN light emitting diodes (LEDs) with and without InGaN underlying layer beneath the multiple quantum wells (MQWs) were grown by metal-organic vapor phase epitaxy. Based on the photoluminescence excitation measurements, it was found that the Stokes shift of the sample with a 10-nm-thick In_0.1Ga_0.9N underlying layer was about 64 meV, which was smaller than that of the reference sample without InGaN underlying layer, indicating a reduced quantum-confined Stark effect (QCSE) due to the decrease of the piezoelectric polarization field in the MQWs. In addition, by fitting the photon energy dependence of carrier lifetime values, the radiative recombination lifetime of the sample with and without InGaN underlying layer were obtained about 1.22 and 1.58 ns at 10?K, respectively. The shorter carrier lifetime also confirmed that the QCSE in the MQWs was weakened after inserting the InGaN underlying layer. In addition, although the depth of carrier localization in the sample with InGaN underlying layer became smaller, the nonradiative recombination centers (NRCs) inside it decreased, and thus suppressed the nonradiative recombination process significantly according to the electroluminescence measurement results. Compared to the reference sample, the efficiency droop behavior was delayed in the sample with InGaN underlying layer and the droop effect was also effectively alleviated. Therefore, the enhanced light-emission efficiency of ultraviolet InGaN/GaN MQW LEDs could be attributed to the decrease of QCSE and NRCs.     

Interplay between Coulomb interaction and quantum-confined Stark-effect in polar and nonpolar wurtzite InN/GaN quantum dots

In this paper we systematically analyze the electronic structures of polar and nonpolar wurtzite-InN/GaN quantum dots and their modification due to the quantum-confined Stark effect caused by intrinsic fields. This is achieved by combining continuum elasticity theory with an effective-bond orbital model to describe the elastic and single-particle electronic properties in these nitride systems. Based on these results, a many-body treatment is used to determine optical absorption spectra. The efficiency of optical transitions depends on the interplay between the Coulomb interaction and the quantum-confined Stark effect. We introduce an effective confinement potential which represents the electronic structure under the influence of the intrinsic polarization fields and calculate the needed strength of Coulomb interaction to diminish the separation of electrons and holes.     

Electronic structure of GaAs/AlGaAs quantum double rings in lateral electric field

A three-dimensional model of GaAs/A1GaAs quantum double rings in the lateral static electric field is investigated theoretically.The eigenvalue problem with the effective-mass approximation is solved by means of the finite-element method.The energy levels and wave functions of quantum-confined electrons and heavy holes are obtained and show an agreement with our previous theoretical and experimental studies.It is shown in the approximation of neglecting the Coulomb attraction between the electron and heavy hole that a relatively large Stark shift of exciton emission of 4 meV is attainable with an applied electric field of 0.7 kV/cm.