单负材料异质结构中损耗诱导的场局域增强和光学双稳态

光学双稳态的阈值取决于非线性材料中的场局域程度, 场局域越强阈值越低. 而材料的损耗是影响场局域强弱的重要因素. 之前, 人们普遍认为, 增加损耗会削弱场局域, 不利于降低阈值. 本文研究了由磁单负材料和电单负材料组成的异质结构中光学双稳态现象, 发现随着损耗的增大, 其阈值可以呈现先降后升的非单调变化. 进一步研究表明, 异质结构界面处的电磁场强度随着损耗增大呈现先降后升的非单调变化, 即增加损耗也有可能增强场局域. 研究结果揭示了场局域程度与材料损耗之间的非单调依赖关系, 为设计开发非线性功能器件提供了新的思路.     

由高反射结构组成异质结中的高透射界面模理论和实验研究

通过对两种异质结(金属-光子晶体异质结和光子晶体异质结)进行理论计算发现,由两种高反射材料(如负介电常数材料、光子晶体禁带材料)构成的异质结中,存在高透射的局域界面模,并且这种局域界面模的存在与零阻抗条件相关.同时,实验制作了一种金属-光子晶体异质结结构,并在近红外波段观察到该局域界面模的存在.     

场助InP／InGaAsP／InP半导体光电阴极异质结能带的计算

采用双曲型的渐变函数,同时考虑加偏压时引起的阴极表面空间电荷区的变化,对场助InP/TnGaAsP/InP半导体光电阴极异质结的能带结构进行了详细的分析和计算,得到了在不同材料参数时,异质结能带结构的分布曲线.计算结果指出了达到理想的异质结传输效率时,发射层的厚度和掺杂浓度、吸收层的掺杂浓度、异质结界面处渐变区宽度以及场助偏压应满足的条件.它有助于场助半导体光电阴极的结构设计和材料参数的选择.     

损耗型单负材料双层结构的反射率及偏振度

通过传输矩阵法,理论研究了损耗型单负材料双层结构在不同入射角时的反射率和偏振度。结果表明,损耗型单负材料双层结构不同于常规介电材料,随着入射角的增大,p分量反射率比s分量的反射率大。随着损耗(电损耗和磁损耗)的增大,p波的反射率和s波的反射率差异减小,直到重合,偏振度变为0。对于损耗型单负材料双层结构,当MNG层厚度增大时,偏振度变化幅度减小;而当ENG层厚度增大时,偏振度变化幅度增大。     

双层单负材料结构的古斯-亨兴位移调控

运用反射相位法和高斯光束峰值位移判断法研究了由电单负材料(ENM)和磁单负材料(MNM)组成的双层结构的古斯-亨兴位移现象.首先利用传输矩阵计算结构的反射系数,通过对反射系数的相位分析,发现对于单层的电单负材料和单层的磁单负材料,反射高斯光束的古斯-亨兴位移方向相反,同时位移的大小与材料厚度存在一定的联系.进一步对双层...     

基于含单负材料光量子阱结构的全向多通道滤波器

分析了含单负材料的光量子阱结构中的振荡透射模的性质.用两种单负（负介电常量或负磁导率）材料交替周期堆叠形成的两个光子晶体构造了一维光量子阱结构,该结构中仅其中一个光子晶体含有零有效位相带隙.数值计算结果发现,在零有效位相带隙内存在振荡透射模.通过改变井区域光子晶体内单负材料层的厚度及周期数,振荡透射模的数目、频率及频率间隔均可调节.振荡透射模对入射角度的依赖均很弱;随着入射角度的改变,缺陷模频率的相对改变量保持在0.02以下.该研究结果可用于设计多通道全向滤波器.     

单轴应力对一维镜像光子晶体光子局域态透射峰的影响

利用传输矩阵法研究了镜像异质三周期一维光子晶体中的光子局域态随单轴应力发生变化的特性. 对于镜像异质三周期光子晶体, 由于其镜像结构, 破坏了光子晶体的有序性, 产生了一个缺陷态, 使其在较宽的光子禁带中心有一个光子局域态透射峰. 研究表明: 当对镜像异质三周期光子晶体施加单轴应力时, 其中的光子局域态透射峰会随着应力的改变而发生剧烈的变化. 当外部微弱的机械应力施加到光子晶体上时, 对光子晶体形成一个拉伸应变, 拉伸应变引起光子晶体结构的变化, 进而大幅度影响光子局域态透射峰的透射率.结果表明: 透射峰的透射率明显受单轴应力的影响. 这些特性可为用此结构的光子晶体设计超高灵敏度压力传感器提供理论参考. 关键词： 光子晶体 单轴应力 光子局域态 传输矩阵     

单负材料光子晶体异质结构的频率响应

用传输矩阵方法研究了由两种单负材料构成的光子晶体异质结构的透射特性.结果表明，当异质结构具有零有效折射率时，由于迅衰场表面模共振耦合，在异质结构双周期光子晶体的每一个分界面上都会出现隧穿模.零有效折射率隧穿模不受入射角、电磁波偏振态、结构周期数和晶格常数标度等因素影响，并且具有零相位延迟，这一特性可用来设计零相位延迟全向多通道滤波器件.而位于中心两侧的隧穿模随入射角、结构周期数和晶格常数标度的减小都统一由中心向两侧移动. 关键词： 单负材料 异质结构 传输矩阵     

基于含单负材料光量子阱结构的全向多通道滤波器

分析了含单负材料的光量子阱结构中的振荡透射模的性质.用两种单负(负介电常量或负磁导率)材料交替周期堆叠形成的两个光子晶体构造了一维光量子阱结构,该结构中仅其中一个光子晶体含有零有效位相带隙.数值计算结果发现,在零有效位相带隙内存在振荡透射模.通过改变井区域光子晶体内单负材料层的厚度及周期数,振荡透射模的数目、频率及频率间隔均可调节.振荡透射模对入射角度的依赖均很弱;随着入射角度的改变,缺陷模频率的相对改变量保持在0.02以下.该研究结果可用于设计多通道全向滤波器.     

一种基于开口空心球的声学超材料

提出了一种基于局域共振的开口空心球(spilt hollow spheres,SHS)模型,数值计算和声学透射实验结果表明基于该模型的声学超材料可以实现负的弹性模量.为了说明SHS的局域共振性质,研究了微结构SHS几何尺寸(例如开口孔径d和空心球直径D)变化时材料的透射性质,结果表明SHS的几何尺寸的改变对声学超材料的透射吸收峰频率有显著影响.另外,还研究了SHS不同排列方式对透射行为的影响,发现单层样品中SHS单元数目以及晶格常数的变化不会引起谐振频率的变化,但是随着SHS单元数目或者样品 关键词： 开口空心球(SHS) 声学超材料 吸收峰 等效弹性模量     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.