Asymmetric transfer hydrogenation of prochiral ketones catalyzed by aminosulfonamide-ruthenium complexes in ionic liquid

Chiral aminosulfonamides containing imidazolium group were used as ligands for the ruthenium(II)-catalyzed asymmetric transfer hydrogenation of prochiral ketones in ionic liquid, affording good to excellent conversions and enantiomeric excesses. The catalytic system could be easily recovered and reused several times.      

Chiral enantiopure bis(thio)ureas derived from TADDOL and their carboxylate complexation capacity

New chiral enantiopure ureas and thioureas with (R,R)-TADDOL backbone were synthesized. Bis-(thio)ureas with C2 symmetry were obtained from TADDOL iso(thio)cyanates and bifunctional amino-(thio)ureas from TADDAMINE, respectively. These were tested for carboxylate recognition capacity and the association constant was determined for the most stable complex.      

Recent progress for capillary electrophoresis with electrochemical detection

Capillary electrophoresis (CE) is an attractive technique in separation science because of its high separation performance, short analysis time and low cost. Electrochemical detection (EC) is a powerful tool for CE because of its high sensitivity. In this review, developments of CE-EC from 2008 to August, 2011 are reviewed. We choose papers of innovative and novel results to demonstrate the newest and most important progress in CE-EC.      

Removal of uranyl ions from UO2(NO3)2 solution by means of Chlorella vulgaris and Dunaliella salina algae

This paper deals with a study of the biosorption of UO₂ ²⁺ ions on two green algae: Chlorella vulgaris and Dunaliella salina. By investigating the retention degree versus contact time from Langmuir and Freundlich biosorption isotherms, kinetic investigations and FTIR spectra it was found that the biosorption process was greater for Chlorella vulgaris than for Dunaliella salina. A new kinetics method is proposed to establish the reaction order concerning the biosorption process of uranyl ions on these biomasses.      

<Emphasis Type="Italic">N</Emphasis>-Alkylation of benzimidazoles with ketonic Mannich bases and the reduction of the resulting 1-(3-oxopropyl)benzimidazoles

Benzimidazole, benzimidazoles diversely substituted at position 2, and 5,6-dimethylbenzimidazole have been alkylated at N ¹ with ketonic Mannich bases derived from acetophenones, acetylnaphthalenes, 2-acetylthiophene and 1-tetralone to afford a series of novel 1-(3-oxopropyl)benzimidazoles. The reduction of these transamination products with NaBH₄ in methanol produced the corresponding 1-(3-hydroxypropyl)benzimidazoles in excellent yields.      

Metathesis transformations of unsaturated derivatives of β-diketones

Selected β-diketones bearing unsaturated derivatives have been demonstrated to undergo homo-metathesis and cross-metathesis with selected olefins in the presence of Grubbs catalysts. The reactions led to respective homo- and cross-metathesis products mainly with good yields and selectivities.      

Diironcarbonyl-coumarin complex: preparation, intramolecular electron transfer, and electro-generation of hydrogen

A new organometallic complex coupling photoactive coumarin to a diironhexacarbonyl unit has been successfully prepared and its composition and electronic structure confirmed by elemental and spectroscopic analyses. Emission spectral analysis of the complex reveals photoinduced intramolecular electron transfer from coumarin to the iron-carbonyl moiety. The compound is electrochemically reduced at −1.24 V vs. Fc/Fc⁺. This reduction is irreversible, attesting to the instability of the complex. Electrochemical evolution of hydrogen in the presence of the complex has been studied and results are discussed.      

Hydrophilic interaction chromatography in drug analysis

Hydrophilic interaction chromatography (HILIC) is an increasingly popular alternative to conventional HPLC for drug analysis. It offers increased selectivity and sensitivity, and improved efficiency when quantifying drugs and related compounds in complex matrices such as biological and environmental samples, pharmaceutical formulations, food, and animal feed. In this review we summarize HILIC methods recently developed for drug analysis (2006–2011). In addition, a list of important applications is provided, including experimental conditions and a brief summary of results. The references provide a comprehensive overview of current HILIC applications in drug analysis.      

Synthesis of fluorescent carboxylic acid ligands for construction of monolayers on nanostructures

Two new long-chain carboxylic acids (1, 2) bearing strong fluorescent group pyrene as ligands for Self-Assembled Monolayers (SAMs) have been synthesized. The multistep targeted synthesis is accomplished by use of Pyren-1-yl methylamine hydrochloride and employing simplified synthetic protocols. Compound 2 contains a chiral center purposely introduced along the atom chain in order to make it suitable for chiro-optical studies of the resulting SAMs.      

One step synthesis of Diflunisal using a Pd-diamine complex

Diflunisal and Felbinac, two FDA-approved NSAIDs and other biphenyl carboxylic acids were prepared in one step by a simple and clean Suzuki cross-coupling reaction using an easily synthesized, air and moisture stable, palladium-diamine complex. The yield (93%) for the one-step preparation of Diflunisal is the best reported without using a glovebox and a phoshine-based catalyst.      

Chemometric analysis of heavy metal content for various environmental matrices in terms of their use in biomass thermal processing

Chemometric analysis was performed to determine the heavy metal content, such as Zn, Cd, Ni, Mn, Cu, Pb, and Fe, in 36 samples of Scots Pine taken from 9 locations within the Upper Silesian Industrial Basin. The samples, after being pre-processed, were examined for the above elements through the use of atomic absorption spectroscopy (AAS). The highest concentration of heavy metals was discovered in samples from Jaworzno. Based on the concentration assessment, the relationship between element quantity, sampling location, and matrix type has been determined, and definite element group co-existence has been confirmed and described.      

Thermo-responsiveness of polysiloxanes grafted with poly(dimethyl acrylamide) segments

Thermo-sensitive polymers are of outstanding importance due to their ability to undergo controlled major changes in their properties as a response to minor modifications in temperature. The syntheses of novel polymers by grafting polysiloxane containing chlorobenzyl groups in the side chain by the homopolymerization of N,N′-dimethyl acrylamide (DMA) or the copolymerization of DMA and methyl methacrylate (MMA) using SET-LRP technique are presented. The polymers were characterized by 1H-NMR, UV, and fluorescence spectroscopy, and DSC. The thermo-sensitivity and the lower critical solution temperature (LCST), as well as the aggregation phenomena during the phase transition are evidenced by dynamic light scattering (DLS) and rheology.      

Impact of un-polymerized acrylamide monomer residues onto protein identification by MALDI TOF MS

Polyacrylamide gel electrophoresis is a powerful tool for protein mixture separation frequently used in proteomic studies. This article describes the problems which can arise during the identification process of separated proteins by matrix assisted laser desorption/ionization mass spectrometry. Presence of residual acrylamide monomers in the peptide samples leads to a significant peptide signal suppression. In the case of protein prohibitin, isolated from the MCF 7 breast cancer cell line, the peptide signal suppression was observed in 50% of all detected peptides.      

Ceramic materials made of CdTe and Cd-Zn-Te nanocrystalline powders

In the present study newly produced semiconductor ceramic nanopowder materials made of CdTe and Cd_1−xZn_xTe (CZT) are considered. Common features and differences in microstructures, phase transformations, grain growth and properties of the ceramic materials of the binary and ternary compositions are studied.      

Surface analysis of the size-fractioned urban aerosols by secondary ion mass spectrometry (ToF-SIMS)

The secondary ion mass spectrometry method (ToF-SIMS) has been applied to the analysis of some mineral and organic species on the surface layers of airborne urban particulates. Particulate matter was collected on aluminum sheets of the 8-stage Anderson type cascade impactor from three different sampling sites in the city of Lodz, Poland, which were different in terms of aerosol source apportionment. The obtained results show that vehicle combustion products occur mainly in fine fraction with aerodynamic diameters below 1μm. The main contribution to the mineral components comes from direct and traffic related soil resuspension.      

Removal of cadmium and copper ions by <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis> R57 cells immobilized onto polyvinyl alcohol/tetraethoxysilane hybrid matrices

Polyvinyl alcohol (PVA) and tetraethoxysilane (TEOS) hybrid materials were prepared by sol-gel methods and tested as matrices for immobilization of Trichosporon cutaneum R57, capable of removing cadmium and copper ions from aqueous solutions. A kinetic model was applied and the effects of matrix TEOS content on the copper and cadmium uptake equilibria and rate constants were investigated.      

<Emphasis Type="Italic">Mung bean</Emphasis> response during immobilization of exchangeable aluminum in acidic soil

A soil incubation and shot-term plant growth experiment was conducted to study the effect of ferruginous mineral application on exchangeable Al immobilization. The mineral containing mainly siderite was mixed at various rates with A-horizon soil and incubated at 80% humidity for 45 days. Following the incubation, a short-term plant growth test was carried out using mung beans. The ferruginous mineral application into tested soil resulted in a reduction of the exchangeable aluminum concentration and soil acidity. An increase in root growth and stalk length, as well as a general improvement of plant condition was observed in the case of ferruginous mineral application. This observation was confirmed by chemical analysis of roots and stalks. The greatest amount of essential elements: calcium and magnesium and the lowest amount of aluminum were determined in green part of mung beans sown in the soil with addition of 2% ferruginous mineral.      

Efficient and solvent-free synthesis of 1-amidoalkyl-2-naphthols using <Emphasis Type="Italic">N,N,N’,N’</Emphasis>-tetrabromobenzene-1,3-disulfonamide

N,N,N,’N’-Tetrabromobenzene-1,3-disulfonamide [TBBDA] is found to be a reusable catalyst for efficient synthesis of various amidoalkyl naphthols from β-naphthol, aromatic aldehydes and urea in good to high yields under solvent-free conditions.