Conductometric studies on the stability of copper complexes with different oligosaccharides

Bioactive copper complexes with pullulan or dextran oligosaccharides are the subject of intensive research mainly because of their possible application in veterinary and human medicine. The thermal stability and stability under oxidative conditions of the Cu(II) complexes with reduced low-molar pullulan or dextran were investigated in this paper, using a conductometric method. The influence of ligand constitutions on the stability of the complexes was examined on the basis of ligand property. Forced degradation studies were performed on bulk sample of complexes by using heat (25, 40 and 60°C) and an oxidation agent (0.1, 0.5, 1.0 and 10.0% v/v hydrogen peroxide). It can be concluded, according to the results obtained (by examining conductivity during the forced degradation studies), that Cu(II) complexes show a large pharmaceutical stability for both tests.      

Copper (II) chloride / tetrabutylammonium bromide catalyzed oxidation of 2,6-diisopropylnaphthalene and 4,4′-diisopropylbiphenyl

The oxidation processes of 2,6-diisopropylnaphthalene and 4,4′-diisopropylbiphenyl with oxygen in the presence of a catalyst, composed of copper(II) chloride and tetrabutylammonium bromide, were investigated. It was found that, in essence, only one isopropyl group undergoes oxidation, and obtained mixtures contained mainly peroxide, alcohol, ketone and only small amounts of hydroperoxide.      

Synthesis of fluorescent carboxylic acid ligands for construction of monolayers on nanostructures

Two new long-chain carboxylic acids (1, 2) bearing strong fluorescent group pyrene as ligands for Self-Assembled Monolayers (SAMs) have been synthesized. The multistep targeted synthesis is accomplished by use of Pyren-1-yl methylamine hydrochloride and employing simplified synthetic protocols. Compound 2 contains a chiral center purposely introduced along the atom chain in order to make it suitable for chiro-optical studies of the resulting SAMs.      

Chiral enantiopure bis(thio)ureas derived from TADDOL and their carboxylate complexation capacity

New chiral enantiopure ureas and thioureas with (R,R)-TADDOL backbone were synthesized. Bis-(thio)ureas with C2 symmetry were obtained from TADDOL iso(thio)cyanates and bifunctional amino-(thio)ureas from TADDAMINE, respectively. These were tested for carboxylate recognition capacity and the association constant was determined for the most stable complex.      

Synthesis,crystal structure,spectroscopic and thermal investigations of neodymium(III) biphenyl-4,4′-dicarboxylate framework

The three-dimensional complex {[Nd(bpdc)_1.5(DMF)]·1.4DMF}_n (DMF=N,N′-dimethylformamide, bpdc=biphenyl-4,4′-dicarboxylate) was synthesized using the solvothermal method. The crystal structure of the neodymium(III) complex has been determined by single-crystal X-ray diffraction method at 100(2) K. The polymeric structure consists of neodymium polyhedra bridged by bpdc ligands. Eight-coordinated Nd(III) atoms are surrounded by seven oxygen atoms from six bpdc moieties and one oxygen atom from the DMF molecule. The 3D structure of the complex contains two types of channels occupied by DMF molecules. Thermal analysis revealed that DMF molecules are lost in a stepwise manner. The infrared spectrum confirmed full deprotonation of acid and presence of DMF molecules in the structure.      

Removal of cadmium and copper ions by <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis> R57 cells immobilized onto polyvinyl alcohol/tetraethoxysilane hybrid matrices

Polyvinyl alcohol (PVA) and tetraethoxysilane (TEOS) hybrid materials were prepared by sol-gel methods and tested as matrices for immobilization of Trichosporon cutaneum R57, capable of removing cadmium and copper ions from aqueous solutions. A kinetic model was applied and the effects of matrix TEOS content on the copper and cadmium uptake equilibria and rate constants were investigated.      

Ionic liquid promoted synthesis of bis(indolyl) methanes

1-benzyl-3-methyl imidazolium hydrogen sulphate [bnmim][HSO₄] was found to be an effective catalyst for the condensation reaction of indoles and derivatives with benzaldehydes in microwave irradiation with lower reaction time and higher yields to give bis(indolyl) methanes.      

Physicochemical characteristics of 2-, 3- and 4-methylpyridinium tetrachloroferrates(III)

The crystal structure of 2-methylpyridinium tetrachloroferrate(III) was determined. The iron cation is tetracoordinated by chloride anions, and it adopts a slightly distorted tetrahedral coordination with three angles smaller, two almost equal and one larger than the tetrahedral. The compound is isostructural with its 3-, and 4-methylpyridinium analogues. The thermal properties of 2-, 3- and 4-methylpyridinium tetrachloroferrates(III) have been studied using TG and DSC techniques. The compounds exhibit a high stability in the melt.      

Asymmetric transfer hydrogenation of prochiral ketones catalyzed by aminosulfonamide-ruthenium complexes in ionic liquid

Chiral aminosulfonamides containing imidazolium group were used as ligands for the ruthenium(II)-catalyzed asymmetric transfer hydrogenation of prochiral ketones in ionic liquid, affording good to excellent conversions and enantiomeric excesses. The catalytic system could be easily recovered and reused several times.      

Aminophosphine complex as a catalyst precursor in Suzuki coupling reactions

A palladium complex with an aminophosphine ligand has been prepared and investigated as a catalyst precursor in Suzuki coupling reactions in toluene. Nanoparticles composed of elemental palladium have been isolated from the reaction media and analyzed using transmission electroscopic microscope (TEM), which shows the essential catalysts palladium nanoparticles to have a size of ca. 3.0 nm. dedicate to the 60th birthday of Prof. Dr. Yuan Kou     

Electrosynthesis and thermal characterization of basic copper carbonate nanoparticles

The present study concerns the electrochemical synthesis of basic copper carbonate nanoparticles by oxidation of metallic copper on the anode in an aqueous bicarbonate solution. This simple and one-step preparation can be considered as green synthesis. The scanning electron microscopy (SEM) analysis indicates that average particle size of the product is in the range of about 70 nm. On the other hand, basic copper carbonate micro-powder has been prepared, by mixing solutions of copper(II) sulphate and sodiu bicarbonate. The SEM analysis showed that the size of particles prepared in the same way is in the range of about 1 μm. In another part of this study, the thermal decomposition of micro and nanoparticles of copper carbonate produced by various methods was studied in air using TG-DTA techniques. The results of thermal study show that the decomposition of both samples occurs in single step. Also, the TG-DTA analysis of the nanoparticles indicates that the main thermal degradation occurs in the temperature range of 245–315°C. However, microparticles of Cu(OH)₂ · CuCO₃ decomposed endothermally in the temperature range of 230–330°C.      

Crystallographic and structural characterisation of heterometallic platinum compounds: Part I. Heterobinuclear Pt compounds

This review covers almost 290 heterobinuclear Pt derivatives. When the heterometals (M) are non transition and the binuclear are found both with and without a metal to metal bond. Where M is a transition metal or actinide, only those with a metal-metal bond have been included here. There are thirteen non-transition metals (Sn, Hg, Ge, Sb, Tl, Zn, Pb, Cd, Na, K, Ga, Ca and In). The shortest Pt-M bond distance is 235.2(1) (Pt-Ge). There are eighteen transition metals (Fe, W, Rh, Re, Pd, Ag, Ir, Mo, Mn, Re, Co, Cu, Cr, Au, Ni, Ti, Ta and V). The shortest Pt-M bond distance is 249.5(2) pm (Pt-Cr). There is one example of an actinide, Pt-Th at 298.4(1) pm. The Pt atom has oxidation numbers 0, +2 and +4. The Pt coordination geometries include square planar (most common), trigonal bipyramidal, pseudo octahedral (Pt(IV)) and a few prevalently capped trigonal prismatic seven coordinate species. There are at least two types of isomerism distortion and polymerisation. Factors affecting bond lengths and angles are discussed and some ambiguities in coordination polyhedra are outlined.      

Diironcarbonyl-coumarin complex: preparation, intramolecular electron transfer, and electro-generation of hydrogen

A new organometallic complex coupling photoactive coumarin to a diironhexacarbonyl unit has been successfully prepared and its composition and electronic structure confirmed by elemental and spectroscopic analyses. Emission spectral analysis of the complex reveals photoinduced intramolecular electron transfer from coumarin to the iron-carbonyl moiety. The compound is electrochemically reduced at −1.24 V vs. Fc/Fc⁺. This reduction is irreversible, attesting to the instability of the complex. Electrochemical evolution of hydrogen in the presence of the complex has been studied and results are discussed.      

A dimeric copper coumarin complex: synthesis and crystal structure of [{Cu(4-methyl-7-(salicylideneamino)coumarin)2}2]

A binuclear copper complex [{Cu(L)₂}₂], C₆₈H₄₈Cu₂N₄O₁₂C (where L is 4-methyl-7-(salicylideneamino)coumarin), has been synthesized and characterized using elemental analysis, molar conductance measurements, and infrared, ultraviolet and ESR spectrosopy. The molecular structure of title compound, determined by single-crystal X-ray diffraction studies, reveals that the two symmetric Cu(L)2 units are associated into a dimer by rather long Cu...O bonds. The Cu(II) ions are bridged via the phenolic oxygen of one of the monomers and have distorted trigonal bipyramidal conformation geometry. Within each monomer the two methylsubstituted coumarin skeletons are trans to one another, but adopt a parallel arrangement with respect to the other monomer. Only half of the complex molecule can be found in the asymmetric unit, Z′ = 0.5, the other half is generated by the symmetry centre.      

A novel triply bridged dinuclear four-coordinate copper(I) complex with sterically bulky bis(dicyclohexylphosphino)methane ligand

A novel triply bridged dinuclear copper(I) complex: Cu₂(μ-paa)(μ-dcpm)₂(BF₄)₂·2CH₂Cl₂ [ paa = pyridine-2-carbaldehyde azine (C₁₂H₁₀N₄) and dcpm = bis(dicyclohexylphosphino)methane(C₂₅H₄₆P₂) ] has been synthesized and structurally characterized. Crystallographic studies of the complex showed that two copper(I) ions were bridged by one paa ligand and two dcpm ligands. The paa ligand adopted the Z configuration at the partially double N-N bond and the two copper ions have distorted tetrahedral coordination geometry. Because of the steric effect of dcpm, the pyridine rings of the paa ligand are obviously not on the same plane (the dihedral angle is 43.61⁰). The interaction between neighboring ligands results in a N-N bond length (1.374(7) Å) contraction. The UV-vis spectra of the complex exhibited intense high-energy absorptions at λ_max < 340 nm and broad visible bands in a range of 380?550 nm, ascribed to intraligand (IL π-π*) transitions and metal-to-ligand charge-transfer (MLCT) transitions, respectively. Interestingly, the absorbtion peaks varied regularly with the solvent polarity. Although the complex has a rigid structure with the copper ions held firmly by triply bridged ligands, the emission and excitation spectra revealed that the complex exhibits weak fluorescence.

Open image in new window

     

Recent progress for capillary electrophoresis with electrochemical detection

Capillary electrophoresis (CE) is an attractive technique in separation science because of its high separation performance, short analysis time and low cost. Electrochemical detection (EC) is a powerful tool for CE because of its high sensitivity. In this review, developments of CE-EC from 2008 to August, 2011 are reviewed. We choose papers of innovative and novel results to demonstrate the newest and most important progress in CE-EC.      

Chemometric analysis of heavy metal content for various environmental matrices in terms of their use in biomass thermal processing

Chemometric analysis was performed to determine the heavy metal content, such as Zn, Cd, Ni, Mn, Cu, Pb, and Fe, in 36 samples of Scots Pine taken from 9 locations within the Upper Silesian Industrial Basin. The samples, after being pre-processed, were examined for the above elements through the use of atomic absorption spectroscopy (AAS). The highest concentration of heavy metals was discovered in samples from Jaworzno. Based on the concentration assessment, the relationship between element quantity, sampling location, and matrix type has been determined, and definite element group co-existence has been confirmed and described.      

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides to N-alkyl-2-(2-hydroxyphenyl)-2-imino-acetamides

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides is reported. N-alkyl-2-(2-hydroxyphenyl)-2-iminoacetamide derivatives are generated presumably via the preliminary formation of N, N′-disubstituted benzo[b]furan-2,3-diamines and subsequent oxidation with molecular oxygen.      

Isomers in the chemistry of mercury coordination compounds

The coordination chemistry of mercury is an extremelybroad field, as shown by a survey covering the crystallographic and structural data of over 550 examples. About 12% of those complexes exist as isomers and are summarised and classified in this review. Included are distortion (73%), polymerisation (20.6%), coordination number (3.2%) and ligand (3.2%) isomerism. These are discussed in terms of the coordination around the mercury atoms, and correlations are drawn between donor atoms, bond distances and bond angles. Distortion isomers, differing only by the degree of distortion in the Hg — L and L — Hg — L angles, are the most common. These isomers are discussed and compared with those found in the chemistry of zinc and cadmium.