氧化锶催化性质：Ⅱ.SrO,MgO上异丙醇的分解反应

ＳｒＯ，ＭｓＯ对异丙醇的分解反应有各自的作用形式，因而产物分布也有明显差别．ＭｇＯ上异丙醇分解，在较低温度时，主要产物为丙酮和丙烯；随温度升高，生成丙烯的量增加，而丙酮的量减少，直至消失，在ＳｒＯ上，异丙醇在较高温度时反应，产物几乎为丙酮，丙烯的生成量极少。认为：产物中丙烯来源于异丙醇在催化剂表面强酸中心上的脱水；丙酮在ＭｇＯ上来源于强碱中心和酸中心协同作用异丙醇的脱氢，而在ＳｒＯ上则是ＳｒＯ表面极强的碱中心作用异丙醇而脱氢制得。     

O2和CO表面催化反应的活性位分布模型

对于O_2和CO表面催化反应，建立了一个新的不可逆Monte Carlo模拟模型。在 二维格子中，引进了表面活性位和非活性位的要领。模型假设，一定浓度的活性位 随机分布在非活性位上，形成了活性位分布的二维格子模型反应器，并在ZGB模型 的基础上，考虑了氧原子和CO分子的表面扩散，特别是引进了吸附粒子的定向表面 扩散。其中，活性位和活性位最近邻是表面吸附物质反应的活性中心，而非活性位 的作用是通过表面扩散传质。当活性位浓度C_a = 1且考虑扩散时，模型还原为增 加了扩散的ZGB模型。当活性位浓度C_a = 1且只考虑氧的扩散时，模拟结果表明， 扩散几率达到某一数值（0.3）时，二级相变点完全消失。当活性位浓度C_a逐渐减 小时，单位活性位产生的CO_2的速率不断增大，这表明活性位的利用率提高了。     

对棕色固氮菌-230固氮酶动力学的研究

对于棕色固氮菌-230固氮酶进行了动力学研究,发现:固氮酶是一种别构酶;ATP是固氮酶的正效应剂;ADP是固氮酶的负效应剂;ATP结合部位是固氮酶的调节部位;乙炔还原活性部位是固氮酶的催化部位;Av1与Av2之间有两个或两个以上的结合部位,这些结合部位之间存在着正协同效应,Av1与Av2的结合部位对乙炔还原活性部位有正协同效应.     

Specific cell-permeable inhibitor of proteasome trypsin-like sites selectively sensitizes myeloma cells to bortezomib and carfilzomib

Proteasomes degrade the majority of proteins in mammalian cells, are involved in the regulation of multiple physiological functions, and are established targets of anticancer drugs. The proteasome has three types of active sites. Chymotrypsin-like sites are the most important for protein breakdown and have long been considered the only suitable targets for antineoplastic drugs; however, our recent work demonstrated that inhibitors of caspase-like sites sensitize malignant cells to inhibitors of the chymotrypsin-like sites. Here, we describe the development of specific cell-permeable inhibitors and an activity-based probe of the trypsin-like sites. These compounds selectively sensitize multiple myeloma cells to inhibitors of the chymotrypsin-like sites, including antimyeloma agents bortezomib and carfilzomib. Thus, trypsin-like sites are cotargets for anticancers drugs. Together with inhibitors of chymotrypsin- and caspase-like sites developed earlier, we provide the scientific community with a complete set of tools to separately modulate proteasome active sites in living cells.     

A detailed TPD study of H2O and pre-adsorbed O on the stepped Pt(553) surface

Water molecules desorbing from the bare Pt(553) surface desorb in a three peak structure, associated with, respectively, desorption from step and terrace sites and the water multilayer. Upon pre-covering the step sites with O(ad) we mainly observe OH formation on step sites. When terrace sites are also pre-covered with O(ad), OH(terrace) formation is favored over OH(step) formation, presumably because OH formed at terrace sites is more easily incorporated in a hydrogen bonded network of OH/H(2)O. This is a gradual process: with increasing θ(O) less OH(step) is formed. Thus, in spite of the fact that OH at step sites has a higher binding energy than OH at terrace sites, the possibility of the formation of OH at terrace sites actually inhibits the formation of OH at step sites, leaving O(step) as the most stable water dissociation product on the step.     

Differences in the redistribution of concanavalin A and wheat germ agglutinin binding sites on mouse neuroblastoma cells.

Concanavalin A (Con A), wheat germ agglutinin (WGA), and Ricinus communis agglutinin (RCA) bound with either 125I, fluorescent dyes, or fluorescent polymeric microspheres were used to quantitate and visualize the distribution of lectin binding sites on mouse neuroblastoma cells. As viewed by fluorescent light and scanning electron microscopy, over 10(7) binding sites for Con A, WGA, and RCA appeared to be distributed randomly over the surface of differentiated and undifferentiated cells. An energy-dependent redistribution of labeled sites into a central spot occurred when the cells were labeled with a saturating dose of fluorescent lectin and maintained at 37 degrees C for 60 min. Reversible labeling using appropriate saccharide inhibitors indicated that the labeled sites had undergone endocytosis by the cell. A difference in the mode of redistribution of WGA or RCA and Con A binding sites was observed in double labeling experiments. When less than 10% of the WGA or RCA lectin binding sites were labeled, only these labeled sites appeared to be removed from the cell surface. In contrast, when less than 10% of the Con A sites were labeled, both labeled and unlabeled Con A binding sites were removed from the cell surface. Cytochalasin B uncoupled the coordinate redistribution of labeled and unlabeled Con A sites, suggesting the involvement of microfilaments. Finally, double labeling experiments employing fluorescein-tagged Con A and rhodamine-tagged WGA indicate that most Con A and WGA binding sites reside on different membrane components and redistribute independenty of each other.     

Use of amino acid composition to predict ligand-binding sites

A novel method for predicting the binding sites for druglike compounds on the surface of proteins was developed on the basis of the specific amino acid composition observed at the ligand-binding sites of ligand-protein complexes determined by X-ray analysis. A profile representing the preference of each of the 20 standard amino acids at the binding sites of druglike molecules was obtained for a small set of high-quality complex structures. An index termed propensity for ligand binding (PLB) was created from these profiles. The PLB index was used to predict the propensity of binding for 804 ligands at all potential binding sites on the proteins whose structures were determined by X-ray analysis. If the sites with the first two highest PLB indices are taken into consideration, the successfully predicted sites reached a high percentage of 86. The PLB prediction is relatively simple, but the validation study showed that it is both fast and accurate to detect ligand-binding sites, especially the binding sites of druglike molecules. Therefore, the PLB index can be used to predict the ligand-binding sites of uncharacterized protein structures and also to identify novel drug-binding sites of known drug targets.     

利用程序升温还原方法研究钴,钌,钼加氢脱硫催化剂氧化态的还原过程

钴或镍在加氢脱硫(HDS)催化剂中的助剂作用文献已有很多的讨论。近年来,研究结果发现,少量的钌加入到Mo/Al_2O_3和Co-Mo/Al_2O_3催化剂上可以显著地提高其加氢脱硫活性,可是关于钌的助剂作用前人研究的较少。因此对比研究钴和钌的的助剂作用有助于认识各种不同类型的助剂在加氢脱硫催化剂中的功能。本文应用程序升温还原方法对钴和钌在加氢脱硫催化剂的前身态氧化物还原过程中的助剂作用进行了考察。     

Determination of the chemical nature of active surface sites present on bulk mixed metal oxide catalysts

CH3OH temperature programmed surface reaction (TPSR) spectroscopy was employed to determine the chemical nature of active surface sites for bulk mixed metal oxide catalysts. The CH3OH-TPSR spectra peak temperature, Tp, for model supported metal oxides and bulk, pure metal oxides was found to be sensitive to the specific surface metal oxide as well as its oxidation state. The catalytic activity of the surface metal oxide sites was found to decrease upon reduction of these sites and the most active surface sites were the fully oxidized surface cations. The surface V5+ sites were found to be more active than the surface Mo6+ sites, which in turn were significantly more active than the surface Nb5+ and Te4+ sites. Furthermore, the reaction products formed also reflected the chemical nature of surface active sites. Surface redox sites are able to liberate oxygen and yield H2CO, while surface acidic sites are not able to liberate oxygen, contain either H+ or oxygen vacancies, and produce CH3OCH3. Surface V5+, Mo6+, and Te4+ sites behave as redox sites, and surface Nb5+ sites are Lewis acid sites. This experimental information was used to determine the chemical nature of the different surface cations in bulk Mo-V-Te-Nb-Ox mixed oxide catalysts (Mo(0.6)V(1.5)Ox, Mo(1.0)V(0.5)Te(0.16)Ox, Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox). The bulk Mo(0.6)V(1.5)Ox and Mo(1.0)V(0.5)Te(0.16)Ox mixed oxide catalytic characteristics were dominated by the catalytic properties of the surface V5+ redox sites. The surface enrichment of these bulk mixed oxide by surface V5+ is related to its high mobility, V5+ possesses the lowest Tammann temperature among the different oxide cations, and the lower surface free energy associated with the surface termination of V=O bonds. The quaternary bulk Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox mixed oxide possessed both surface redox and acidic sites. The surface redox sites reflect the characteristics of surface V5+ and the surface acidic sites reflect the properties normally associated with supported Mo6+. The major roles of Nb5+ and Te4+ appear to be that of ligand promoters for the more active surface V and Mo sites. These reactivity trends for CH3OH ODH parallel the reactivity trends of propane ODH because of their similar rate-determining step involving cleavage of a C-H bond. This novel CH3OH-TPSR spectroscopic method is a universal method that has also been successfully applied to other bulk mixed metal oxide systems to determine the chemical nature of the active surface sites.     

甲烷在氧化镧上C-H断键活性中心的研究

在不同条件下制备了一系列La~2O~3样品,以CH~4与CD~4间的氢原子交换反应作为测试反应来测量La~2O~3对CH~4分子中C-H键的断键能力.采用NH~3-TPD,CO~2-TPD和NH~3,CO~2对催化剂的中毒反应来研究La~2O~3表面的酸中心和活性中心.La~2O~3的表面组成用XPS测量.实验发现尽管酸中心在活性中心只占较小的部分. 但它与碱中心一样对于CH~4分子的C-H断键是必不可少的.本文提出, 组成活性中心的酸中心各碱中心很可能分别是一部分具有较强酸性的晶格La^3^+和具有较强碱性的晶格O^2^-,而La~2O~3晶体中晶格缺陷的形成能使更多的晶格离子成为活性中心.     

Pd／HM催化剂的制备及其表面酸性质

Ｐｄ／ＨＭ催化剂的制备及其表面酸性质徐忠民，苏运来，李全芝，胡家芬（复旦大学化学系，上海２００４３３）关键词钯／氢型丝光沸石，酸性质，氨－程序升温脱附，红外－程序升温脱附轻质烷烃的催化异构化是生产高辛烷值汽油的主要加工过程之一．自从Ｒａｂｏ等［１］发...     

纳米Pd和Au催化CO2还原粒径效应的密度泛函理论计算研究

以可再生能源为能量来源,在水溶液中进行的光(电)催化CO2还原生成高附加值化学品和燃料是解决能源危机与环境污染的有效途径之一.CO是一种简单却很重要的CO2还原产物,它可以作为水煤气变换反应与费托合成的重要原料.具有较高CO选择性的贵金属纳米颗粒催化剂(如Au和Pd)一直受到研究者的广泛关注.一般来说,金属颗粒催化剂的...     

Hydrogen Effects for Propylene Polymerization with Ultra Low TiCl3 Loading MgCl2-Supported Catalyst

Hydrogen effects for propylene polymerization were investigated with ultra low TiCl₃ loading MgCl₂-supported catalysts in which the electric states of Ti species can be almost uniform. Hydrogen did not affect the catalyst activity, while the efficiency of hydrogen as a chain transfer agent was found to depend on the Ti content of the catalyst and the stereospecificity of the polymerization sites: Hydrogen was effective for isospecific sites independent of Ti contents, but inert for aspecific sites only at the extremely low Ti content. These results were explained within the island model, where isospecific sites may be located in the islands with other Ti species in their surroundings acting, as a steric hindrance for isospecific polymerization and as hydrogen dissociation sites after deactivation. Most of the aspecific sites should be isolated only at the extremely low Ti content. These isolated sites have no other Ti species in their surroundings, i.e. no hydrogen dissociation sites, and are inert to hydrogen.     

SO_4~(2-)/ZrO_2超强酸催化剂的表面酸性质

本文用红外光谱和程序升温氨脱附对ＳＯ～（２－）＿４／ＺｒＯ＿２超强酸催化剂的 表面酸性特征进行了研究，并结合Ｘ－光电子能谱分析结果和催化剂 上甲醇转化反应的结果得到了如下一些重要信息；１、在焙烧温度不太 高时催化剂表面除存在Ｌｅｗｉｓ酸外还有Ｂｒｏｎｓｔｅｄ酸后者的强酸性是 通过结构（Ⅱ）式所体现出来的．且Ｂ酸随焙烧温度的升高而增多；２、 Ｈ＿２ＳＯ＿４的浓度和焙烧温度都是影响酸强度分布的重要因素．当Ｈ＿２ＳＯ＿４ 浓度为１ｍｏｌ／Ｌ或焙烧温度低于７７３Ｋ时，催化剂表面强酸中心最多； ３、甲醇转化为二甲醚在较弱的酸中心上就可进行，而生成烃的反应不 仅要求强酸中心而且是在Ｂ酸中心上进行的。     

Construction of Asymmetrical Dual Jahn–Teller Sites for Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction (PCR) expresses great attraction to convert useless greenhouse gas into valuable chemical feedstock. However, the weak interactions between catalytic sites and PCR intermediates constrains the PCR activity and selectivity. Herein, we proposed a new strategy to match the intermediates due to the maximum orbital overlap of catalytic sites and C₁ intermediates by establishing dual Jahn–Teller (J–T) sites, in which, the strongly asymmetric J–T sites can break the nonpolar CO₂ molecules and self-adapt the different structure of C₁ intermediates. Taking cobalt carbonate hydroxide as an example, the weakly symmetric dual cobalt (Co₂) dual J–T sites, weakly asymmetric Fe&Co sites and strongly asymmetric Cu&Co sites were assembled. After illumination, the interaction between dual J–T sites and the CO₂ molecules enhances J–T distortion, which further modulates the PCR activity and selectivity. As a result, the Cu&Co sites exhibited CO yield of 8137.9 μmol g⁻¹, about 2.3-fold and 4.2-fold higher than that of the Fe&Co and Co₂ sites within 5-hour photoreaction, respectively. In addition, the selectivity achieved as high as 92.62 % than Fe&Co (88.67 %) and Co₂ sites (55.33 %). This work provides a novel design concept for the construction of dual J–T sites to regulate the catalytic activity and selectivity.     

Directing Aluminum Atoms into Energetically Favorable Tetrahedral Sites in a Zeolite Framework by Using Organic Structure‐Directing Agents

The Al location in zeolites can have massive influences on the zeolite properties because it directly correlates with the cationic active sites. Herein, the synthesis of IFR zeolites with controlled Al distribution at different tetrahedral sites (T sites) is reported. The computational calculations suggest that organic structure‐directing agents (OSDAs) used for zeolite synthesis can alter the energetically favorable T sites for Al. Zeolite products synthesized under identical conditions but with different OSDAs are found to have altered fractions of Al at different T sites in accordance with the energies derived from the zeolite–OSDA complexes. Our finding thus provides evidence for the ability of OSDAs to direct Al into more energetically favorable T sites, thereby offering rational synthetic guidelines for the selective placement of Al into specific crystallographic sites.     

Observation of a one-dimensional adsorption site on carbon nanotubes: adsorption of alkanes of different molecular lengths

Three well-defined adsorption sites have been found on opened single-wall carbon nanotubes by temperature-programmed desorption measurements for several alkanes. A series of linear chain alkanes from pentane to nonane, as well as a branched alkane molecule, 2,2,4-trimethylpentane, were used to elucidate the effect of molecular length on the capacity of the adsorption sites. The two highest-energy adsorption sites were assigned as the nanotube interior sites and groove sites on the outside of the nanotube bundles. Hybrid Monte Carlo simulations were performed to probe the molecular-level details of adsorption. Both in experiments and in the simulation, the groove sites were seen to behave as one-dimensional adsorption space, demonstrating an inverse dependence of capacity on the length of the adsorbed molecule. In contrast, the capacity of the internal sites was found to depend inversely on the volume occupied by the molecule.     

氢原子在Ni(111)次表面和Ni(211)、(533)台阶面上的吸附与振动

应用原子与表面簇合物相互作用的五参数Morse势(5-MP)方法对氢原子在Ni(111)表面和次表面以及Ni(211), (533)台阶面进行了系统研究, 得到了氢原子在上述各面的吸附位、吸附几何、结合能和本征振动频率. 计算结果表明, 在Ni(111)面上, 氢原子优先吸附在三重位, 随着覆盖度的增加会吸附在次表面八面体位和四面体位. Ni(211), (533)的最优先吸附位都是四重位, 当氢原子的覆盖度增大时占据(111)平台的三重吸附位. 靠近台阶面的吸附位受台阶和平台高度的影响很大. 此外, 我们计算了氢原子在各表面的不同吸附位的扩散势垒, 获得氢原子在各表面的最低能量扩散通道.     

Computer simulation of dissociative adsorption of water on CaO and MgO surfaces and the relation to dissolution

Atomistic simulation techniques have been employed to model the dissociative adsorption of water at three-, four- and five-coordinated surface sites of CaO and MgO crystals in a series of partial coverages. All sites can be hydroxylated but the lower-coordinated sites are found to be more reactive. The calculated hydration energies agree with experiment where available. Investigating dissolution of cation-oxygen pairs from various surface sites shows the process to be energetically possible on all surfaces but more exothermic at the lower-coordinated sites.     

Protein-protein binding sites prediction by 3D structural similarities

Identifying the location of binding sites on proteins is of fundamental importance for a wide range of applications including molecular docking, de novo drug design, structure identification, and comparison of functional sites. In this paper, we develop an efficient approach for finding binding sites between proteins. Our approach consists of four steps: local sequence alignment, protein surface detection, 3D structure comparison, and candidate binding site selection. A comparison of our method with the LSA algorithm shows that the binding sites predicted by our method are somewhat closer to the actual binding sites in the protein-protein complexes. The software package is available at http://sites.google.com/site/guofeics/pro-bs for noncommercial use.