(1-x)La_(0.67)Ca_(0.33)MnO_3/xCuO复合体系与La_(0.67)Ca_(0.33)Mn_(1-x)Cu_xO_3电输运行为比较

用不同实验方法制备了名义组分为(1-x)La_(0.67)Ca_(0.33)MnO_3/xCuO(LCMO/CuO)和La_(0.67)Ca_(0.33)Mn_(1-x)Cu_xO_3(LCMCO)两组样品,在宽的温度范围内研究了样品的电输运行为随Cu含量x的变化关系,发现这两组样品表现出不同的行为.对于LCMCO,随x的增加,金属-绝缘体转变温度T_p迅速降低,当x=5.5%,样品表现出绝缘体导电行为;而LCMO/CuO复合样品,当x≤6%时,随x增加,Tp逐渐下降,x≥6%时,T_p不再继续降低,所有样品几乎表现出相同的电输运行为.另外,这两组样品均表现出较好的低场磁电阻效应(LFMR),在0.3 T下样品的最大磁电阻分别达到了～76%和88%.基于样品结构以及制备过程的分析,我们认为LFMR效应的增强主要是因为颗粒边界上形成的Cu相关自旋无序层引起的.     

Oxidation chemistry of poly(ethylene glycol)-supported carbonylruthenium(II) and dioxoruthenium(VI) meso-tetrakis(pentafluorophenyl)porphyrin

[Ru(II)(F(20)-tpp)(CO)] (1, F(20)-tpp=meso-tetrakis(pentafluorophenyl)porphyrinato dianion) was covalently attached to poly(ethylene glycol) (PEG) through the reaction of 1 with PEG and sodium hydride in DMF. The water-soluble PEG-supported ruthenium porphyrin (PEG-1) is an efficient catalyst for 2,6-Cl(2)pyNO oxidation and PhI==NTs aziridination/amidation of hydrocarbons, and intramolecular amidation of sulfamate esters with PhI(OAc)(2). Oxidation of PEG-1 by m-CPBA in CH(2)Cl(2), dioxane, or water afforded a water-soluble PEG-supported dioxoruthenium(VI) porphyrin (PEG-2), which could react with hydrocarbons to give oxidation products in up to 80 % yield. The behavior of the two PEG-supported ruthenium porphyrin complexes in water was probed by NMR spectroscopy and dynamic light-scattering measurements. PEG-2 is remarkably stable to water. The second-order rate constants (k(2)) for the oxidation of styrene and ethylbenzene by PEG-2 in dioxane-water increase with water content, and the k(2) values at a water content of 70 % or 80 % are up to 188 times that obtained in ClCH(2)CH(2)Cl.     

(硫杂)杯[4]芳烃缩氨基(硫)脲(桥联)衍生物的合成

对叔丁基(硫杂)杯[4]芳烃-1,3-二醛基衍生物4a和4b与苯基氨基硫脲进行“1＋2”缩合反应, 合成了杯[4]芳烃缩氨基硫脲衍生物5a和5b, 产率为84%和85%. 化合物4a和4b与1,6-己基双氨基脲发生“1＋1”缩合反应, 合成了杯[4]芳烃双缩氨基脲桥联衍生物6a和6b, 产率为83%和80%. 新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

Kinetic and product study of the gas-phase reactions of OH radicals, NO(3) radicals, and O(3) with (C(2)H(5)O)(2)P(S)CH(3) and (C(2)H(5)O)(3)PS

Rate constants for the reactions of OH radicals and NO3 radicals with O,O-diethyl methylphosphonothioate [(C(2)H(5)O)(2)P(S)CH(3); DEMPT] and O,O,O-triethyl phosphorothioate [(C(2)H(5)O)(3)PS; TEPT] have been measured using relative rate methods at atmospheric pressure of air over the temperature range 296-348 K for the OH radical reactions and at 296 +/- 2 K for the NO(3) radical reactions. At 296 +/- 2 K, the rate constants obtained for the OH radical reactions (in units of 10(-11) cm(3) molecule(-1) s(-1)) were 20.4 +/- 0.8 and 7.92 +/- 0.27 for DEMPT and TEPT, respectively, and those for the NO(3) radical reactions (in units of 10(-15) cm(3) molecule(-1) s(-1)) were 2.01 +/- 0.20 and 1.03 +/- 0.10, respectively. Upper limits to the rate constants for the reactions of O(3) with DEMPT and TEPT of <6 x 10(-20) cm(3) molecule(-1) s(-1) were determined in each case. Rate constants for the OH radical reactions, measured relative to k(OH + alpha-pinene) = 1.21 x 10(-11) e(436/T) cm(3) molecule(-1) s(-1), resulted in the Arrhenius expressions k(OH + DEMPT) = 1.08 x 10(-11) e(871+/-25)/T cm(3) molecule(-1) s(-1) and k(OH + TEPT) = 8.21 x 10(-13) e(1353+/-49)/T cm(3) molecule(-1) s(-1) over the temperature range 296-348 K, where the indicated errors are two least-squares standard deviations and do not include the uncertainties in the reference rate constant. Diethyl methylphosphonate was identified and quantified from the OH radical and NO(3) radical reactions with DEMPT, with formation yields of 21 +/- 4%, independent of temperature, from the OH radical reaction and 62 +/- 11% from the NO(3) radical reaction at 296 +/- 2 K. Similarly, triethyl phosphate was identified and quantified from the OH radical and NO(3) radical reactions with TEPT, with formation yields of 56 +/- 9%, independent of temperature, from the OH radical reaction and 78 +/- 15% from the NO(3) radical reaction at 296 +/- 2 K.     

Surface X-ray scattering of stepped surfaces of platinum in an electrochemical environment: Pt(331) = 3(111)-(111) and Pt(511) = 3(100)-(111)

Real surface structures of the high-index planes of Pt with three atomic rows of terraces (Pt(331) = 3(111)-(111) and Pt(511) = 3(100)-(111)) have been determined in 0.1 M HClO(4) at 0.1 and 0.5 V(RHE) with the use of surface X-ray scattering (SXS). The surfaces with two atomic rows of terraces, Pt(110) = 2(111)-(111) and Pt(311) = 2(100)-(111) = 2(111)-(100), are reconstructed to a (1 × 2) structure according to previous studies. However, the surfaces with three atomic rows of terraces have pseudo-(1 × 1) structures. The interlayer spacing between the first and the second layers, d(12), is expanded 13% on Pt(331) compared to that of the bulk, whereas it is contracted 37% on Pt(511). The surface structures do not depend on the applied potential on either surface.     

Asymmetric hetero-Diels-Alder reactions of N-sulfinyl dienophiles using chiral bis(oxazoline)-copper(II) and -zinc(II) triflates

Asymmetric hetero-Diels-Alder (HDA) reactions of N-sulfinyl dienophiles using bis(oxazoline)-copper(II) and -zinc(II) triflates are described. The cycloadditions with cyclic and acyclic 1,3-dienes have been studied. In most cases, good enantioselectivities (70-98% ee) and yields (60-85%) were obtained with stoichiometric amounts of the Lewis acids. Cyclic dienes gave the endo adducts as major products, while acyclic dienes provided cis adducts. The HDA adducts have been transformed into N-protected alpha-amino acid methyl esters, amino alcohols, and homoallylic amines. A stereochemical model, which accounts for the enantiofacial selectivity of the HDA reaction by a tetrahedral metal center, has been proposed. Mechanistic studies revealed positive nonlinear effects, assumed to arise from the formation of less-reactive heterochiral complexes. Investigation of the temperature dependence of the enantioselectivity indicated that at least two selective reaction steps exist in the zinc-catalyzed reaction. Reactions run with 10 mol % chiral Lewis acid gave poor yields and selectivities. However, in combination with TMSOTf (100 mol %), high yields (68-86%) and enantioselectivities (97-98% ee) were obtained.     

Synthesis of (E)- and (Z)-alpha-alkylidene-gamma-aryl-gamma-butyrolactones via alkenylalumination of oxiranes

Alkenylalumination of substituted styrene oxides with [alpha-(ethoxycarbonyl)alkenyl]diisobutylaluminum, in the presence of BF(3).Et(2)O, affords the corresponding (Z)-alpha-alkylidene-gamma-aryl-gamma-hydroxy esters in 81-100% Z-selectivity. Chromatographic separation of isomers, followed by lactonization with trifluoroacetic acid, provides isomerically pure (Z)-alpha-alkylidene-gamma-aryl-gamma-butyrolactones in 53-78% overall yield. Isomerization of the (Z)-alkylidene hydroxyl esters using LDA, followed by protonation using a bulky proton source, such as BHT, provides a simple route to the corresponding alpha-(E)-alkylidene-gamma-phenyl-gamma-hydroxy esters in 72-78% yield, which were cyclized to obtain the corresponding (E)-butyrolactones in 78-85% yield.     

First Synthesis of Bis(di(indolyl)aryl)methanes From Bis(salicylaldehydes)

In this article, a simple method for the synthesis of bis(di(indolyl)aryl)methanes is described. The iodine‐catalyzed (5 mol %) reaction of indoles with various bis(salicylaldehyde) derivatives affords the bis(di(indolyl)aryl)methanes in excellent yields. The reaction works well under mild reaction condition with shorter reaction time.     

Determination of Cu(III) and Cu(II) + Cu(III) in superconducting copper ceramics

Summary Copper(III) and total copper in superconducting Y-Ba-Cu oxide and related compounds can be determinated by two successive iodimetric titrations after the sample has been dissolved under Ar in HCl/KI medium. First, the iodine equivalent to copper(III) ist titrated with Na₂S₂O₃ solution at pH 4.8, copper(II) being masked with EDTA. The total copper is then determined in the same solution by demasking with acid and iodide, followed by iodimetric titration. The method is both accurate and reproducible. The relative standard deviations for 1.074% copper(III) and 23.37% total copper are 0.8% and 0.3%, respectively.     

Synthesis of （S） and （R）-tilisolol hydrochloride

Tilisolol hydrochloride 1,a non-selectiveβ-adrenoceptor blocker,was developed as a drug for the treatment of hypertension and angina pectoris.The optical active forms of 1,1a and 1b were synthesized from inexpensive phthalic anhydride 2 in eight steps with 13%(S) and 15%(R) overall yield.     

Enantioselective nitroaldol (Henry) reaction using copper(II) complexes of (-)-sparteine

The dichloro[(-)-sparteine-N,N']copper(II) complex provides Henry adducts with high enantioselectivities (73-97% ee) in Henry reaction between nitromethane and various aldehydes.     

The synthesis of poly(hydroxamic acid) from poly(acrylamide)

Poly(hydroxamic acid) in gel or water soluble from was prepared from the reaction of poly(acrylamide) and hydroxylamine in basic aqueous solution (pH > 12) at room temperature. The polymers were composed of 70% hydroxamic acid groups, less than 5% carboxylic acid groups, and 25% unreacted amide groups. The polymers exhibited high affinity to iron(III) and copper(II) in the pH range of 1 to 5 with a high binding rate. A binding of 3 mmol/g for both metals was achieved. Preliminary tests demonstrated the urease inhibitory activity of both linear and crosslinked poly(hydroxamic acids).     

4,4'-(多苯基三联苯)双(有机硅烷)的合成

本文研究了以4,4'-双(三苯基环戊二烯酮基)苯为双烯体,含乙烯基或苯乙炔基有机硅烷为双亲烯体,通过成环反应合成了六个新的4,4'-(多苯基三联苯)双(有机硅烷),产率60%～85%,并用元素分析,IR和'HNM表征了它们的结构。     

Emulsion liquid membrane separation of As(III) and As(V)

Emulsion liquid membranes (ELM) consisting of L113A (surfactant), liquid paraffin (stabilizer) and kerosene (solvent), with HCl solution acting as the external phase and KOH solution acting as the internal phase, were applied to the prior separation of arsenic(III) and arsenic(V) with subsequent spectrophotometric determination by AgDDTC. The effect of various parameters on the recovery of arsenic(III) were investigated. 8 mol/L HCl was required for 95% As(III) recovery. After reduction of As(V) to As(III) with sufficient KI, total arsenic could be determined. The RSD of As(III) and As(total) were both less than 3%. The procedure was applied to aqueous samples with a recovery of 93.5%–101%. Received: 22 March 1998 / Revised: 12 September 1998 / Accepted: 17 September 1998     

Synthesis of N-(Hydroxy)amide- and N-(Hydroxy)thioamide-containing peptides

Methods developed with N-(benzoyloxy)amines and hydroxamic acids were used in the synthesis of N-(hydroxy)amide-containing pseudopeptides. Acylation of N-(benzoyloxy)phenethylamine with the acid chloride of N(alpha)-Fmoc-L-leucine provided a N(alpha)-Fmoc-N-(benzoyloxy)-L-leucinamide in 90% yield. Deprotection of the benzoyl group (using 10 vol % NH(4)OH/MeOH) provided the N(alpha)-Fmoc-N-(hydroxy)-L-leucinamide in 87% yield. In general, the appended Fmoc group allowed for further elaboration of the N-hydroxy-N-(alkyl)amides using classic peptide-coupling methods. A practical synthetic strategy was developed, and racemization issues were addressed using diastereomeric Val-Leu derivatives. In addition, N-(hydroxy)thioamides were generated from the corresponding N-(benzoyloxy)thioamides. N-(Benzoyloxy)thioamides were obtained in moderate yields (53-76%) from the reaction of the corresponding N-(benzoyloxy)amides with Lawesson's reagent (i.e., 2, 4-bis(4-methoxyphenyl)-1,3-dithia-2,4-diphosphetane-2,4-disu lfide). In summary, this new technology allows for the introduction of either N-hydroxyamide or N-(hydroxy)thioamide linkages into pseudopeptide chains without racemization.     

2-(2-(5-氟尿嘧啶-1-基)乙酰氨基)丙酸的合成及表征

以5-氟尿嘧啶-1-基乙酸为原料,N,N-二异丙基碳二亚胺(DIC)/1-羟基苯并三氮唑(HOBt)为缩合剂,分别与L-丙氨酸甲酯和D-丙氨酸甲酯通过液相偶联合成了(S)-和(R)-2-(2-(5-氟-2,4-二氧-3,4-二氢嘧啶-1(2H) -基)乙酰氨基)丙酸甲酯对映体,收率分别为82％和80％;室温下将化合物水...     

Triamidoamine complexes of chromium(III) and chromium(IV)

Treatment of [CrCl3(THF)3] with slightly more than 1 equiv of Li3(N3N) [(N3N)(3-) = ((Me3SiNCH2CH2)3N)(3-)] affords the triamidoamine complex [Cr(N3N)] (1) in 75% yield. 1 is oxidized by PhICl2, CuCl2, or AgCl to give the chromium(IV) complex [Cr(N3N)Cl] (2) in moderate yields. Alternatively, complex 2 is obtained directly from [CrCl3(THF)3] in 50% yield after treatment with 0.5 equiv of Li3(N3N). Both compounds are high-spin complexes bearing three and two unpaired electrons, respectively. Their molecular structures are described revealing a trigonal monopyramidal and trigonal bipyramidal coordination geometry of the chromium center, respectively.     

Stereoselective synthesis of (S)-3-(methylamino)-3-((R)-pyrrolidin-3-yl)propanenitrile

(S)-3-(methylamino)-3-((R)-pyrrolidin-3-yl)propanenitrile (1) is a key intermediate in the preparation of PF-00951966, (1) a fluoroquinolone antibiotic for use against key pathogens causing community-acquired respiratory tract infections including multidrug resistant (MDR) organisms. The current work describes the development of a highly efficient and stereoselective synthesis of 1 in 10 steps with an overall yield of 24% from readily available benzyloxyacetyl chloride. Two key transformations in the synthetic sequence involve (a) catalytic asymmetric hydrogenation with chiral DM-SEGPHOS-Ru(II) complex to afford β-hydroxy amide 11b in good yield (73%) and high stereoselectivity (de 98%, ee >99%) after recrystallization and (b) S(N)2 substitution reaction with methylamine to provide diamine 14 with inversion of configuration at the 1'-position in high yield (80%), after efficient purification using a simple acid/base extraction protocol.     

Emulsion liquid membrane separation of As(III) and As(V)

Emulsion liquid membranes (ELM) consisting of L113A (surfactant), liquid paraffin (stabilizer) and kerosene (solvent), with HCl solution acting as the external phase and KOH solution acting as the internal phase, were applied to the prior separation of arsenic(III) and arsenic(V) with subsequent spectrophotometric determination by AgDDTC. The effect of various parameters on the recovery of arsenic(III) were investigated. 8 mol/L HCl was required for 95% As(III) recovery. After reduction of As(V) to As(III) with sufficient KI, total arsenic could be determined. The RSD of As(III) and As(total) were both less than 3%. The procedure was applied to aqueous samples with a recovery of 93.5%–101%. Received: 22 March 1998 / Revised: 12 September 1998 / Accepted: 17 September 1998     

Efficient and beta-Stereoselective Synthesis of 4(5)-(beta-D-Ribofuranosyl)- and 4(5)-(2-Deoxyribofuranosyl)imidazoles(1)

A synthetic route to 4(5)-(beta-D-ribofuranosyl)imidazole (1), starting from 2,3,5-tri-O-benzyl-D-ribose (5), was developed via a Mitsunobu cyclization. Reaction of 5 with the lithium salt of bis-protected imidazole afforded the corresponding 5-ribosylimidazole 7RS. Hydrolysis of 7RS gave a 1:1 mixture of diol isomers 8R and 8S having an unsubstituted imidazole. Mitsunobu cyclization of the mixture 8RS using N,N,N',N'-tetramethylazodicarboxamide and Bu(3)P exclusively afforded benzylated beta-ribofuranosyl imidazole 9beta in 92% yield, accompanied by alpha-anomer 9alpha, in a ratio of 26.3:1. The configuration of 9beta was established by X-ray crystallography of ethoxycarbonyl derivative 10beta. Reductive debenzylation of 9beta over Pd/C was carried out, and the synthesis of 1 was attained from starting 5 in four steps and 87% overall yield. This synthetic methodology was extended to the synthesis of 4(5)-(2-deoxy-beta-D-ribofuranosyl)imidazole (2). Mitsunobu cyclization of a 1:1 mixture of the corresponding diol isomers 14RS produced 15beta and 15alpha in a ratio of 5.4:1. The synthesis of 2 was attained in a 59% overall yield from the starting 3,5-di-O-benzyl-2-deoxy-D-ribose (12). beta-Stereoselective glycosylation in the key step is discussed and explained by intramolecular hydrogen bonding between an NH in the imidazole and the oxygen functional group in the sugar moiety.