Electrical,optical and photocatalytic properties of Ti-loaded ZnO/ZnO and Ti-loaded ZnO nanospheres

Ti-loaded ZnO and Ti-loaded ZnO/ZnO nanoparticles have been synthesized by sol–gel method and analyzed for photocatalyst application. The phase confirmation was analyzed by powder XRD and surface morphology with HR-SEM and EDAX spectrum. The particle size measured using HR-TEM and SAED pattern confirms the crystalline nature of Ti-loaded ZnO and Ti-loaded ZnO/ZnO nanoparticles. The optical properties were studied with UV–visible diffuse reflectance spectra. The DRS of Ti-loaded ZnO/ZnO nanoparticles are similar to those of pristine ZnO nanoparticles. The KM plots show both the synthesized Ti-loaded ZnO/ZnO and Ti-loaded ZnO exhibit in UV-A region. The electric properties are studied with impedance analyzer, and the results show the charge-transfer resistance of Ti-loaded ZnO/ZnO is larger than that of Ti-loaded ZnO nanoparticles. The photocatalytic activity was studied with methylene blue dye and phenol degradation by Ti-loaded ZnO/ZnO, Ti-loaded ZnO, TiO₂ and ZnO nanoparticles. The photocatalytic activity of Ti-loaded ZnO/ZnO nanospheres is slightly higher than that of other nanoparticles, which shows that they have excellent application as photocatalyst.     

Chemical synthesis, structural characterization, optical properties, and photocatalytic activity of ultrathin ZnSe nanorods

Ultrathin ZnSe nanorods in the cubic phase have been synthesized by the reaction of selenium and zinc oleate for 30 min at 240 °C. These nanorods showed an average diameter of 2.4 nm, which is much smaller than the Bohr size of bulk ZnSe. Thus, they exhibited a remarkable quantum size effect in terms of their optical properties. The formation of the ultrathin nanorods could be attributed to the oriented attachment mechanism, which was supported by the structure of the nanorods and the control experiments. The ultrathin nanorods were transferred into an aqueous solution by ligand exchange. The performance of these nanorods as a catalyst was examined, using the photodegradation of methyl orange as a model reaction. It was found that the ultrathin nanorods possessed better photocatalytic activities than conventional ones.     

Large-scale fabrication of tower-like, flower-like, and tube-like ZnO arrays by a simple chemical solution route

Large-scale arrayed ZnO crystals with a series of novel morphologies, including tower-like, flower-like, and tube-like samples, have been successfully fabricated by a simple aqueous solution route. The morphology and orientation of the obtained ZnO crystal arrays can be conveniently tailored by changing the reactants and experimental conditions. For example, the tower-like ZnO crystal arrays were obtained in a reaction solution system including zinc salt, ammonia, ammonium salt, and thiourea, and the orientation of these tower-like crystals could be controlled by the contents of these reactants. Flower-like ZnO arrays were obtained at lower temperatures, and tube-like ZnO arrays were obtained by ultrasonic pretreatment of the reaction system. The growth mechanism of the tower-like and tube-like ZnO crystals was investigated by FESEM. The results show that tower-like crystals grow layer by layer, while tube-like crystals grow from active nanowires. Ultrasonic pretreatment is proved to be effective in promoting the formation of active nuclei, which have important effects on the formation of the tube-like ZnO crystals. In addition, large-scale arrays of these ZnO crystals can be successfully synthesized onto various substrates such as amorphous glass, crystalline quartz, and PET. This implies this chemical method has a wide application in the fabrication of nano-/microscale devices.     

ZnS nanosheets: Egg albumin and microwave-assisted synthesis and optical properties

ZnS nanosheets were prepared via egg albumin and microwave-assisted method. The phases, crystalline lattice structures, morphologies, chemical and optical properties were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), field-emission scanning electron microscope(FE-SEM), selected area electron diffraction (SAED), Fourier transform infrared (FTIR) spectroscopy, ultraviolet–visible (UV–Vis) spectroscopy and fluorescence(FL) spectrometer and growth mechanism of ZnS nanosheets was investigated. The results showed that all samples were pure cubic zinc blende with polycrystalline structure. The width of ZnS nanosheets with a rectangular nanostructure was in the range of 450–750 nm. The chemical interaction existed between egg albumin molecules and ZnS nanoparticles via the amide/carboxylate group. The band gap value calculated was 3.72 eV. The band at around 440 nm was attributed to the sulfur vacancies of the ZnS nanosheets. With increasing volumes of egg albumin, the photoluminescence (PL) intensity of ZnS samples firstly increased and then decreased, attributed to concentration quenching.     

Li doped and undoped ZnO nanocrystalline thin films: a comparative study of structural and optical properties

Thin films of ZnO were grown by the sol–gel method using spin-coating technique on (0001) sapphire substrates. The effect of doping after annealing on the structural and optical properties has been investigated by means of X-ray diffraction (XRD), cathodoluminescence (CL) spectrum, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The films that were dried at 623 K and then post annealed at 873 K showed (0002) as the predominant orientation. Two emission bands have been observed from CL spectrum. Lithium doped film shows shift in the near band edge UltraViolet emission peak and suppressed defect level emission peak in the visible range. SEM analysis of the films exhibits many spherical shaped nanoparticles. Roughness of the films determined using atomic force microscopy.      

Effects of In, Al and Sn dopants on the structural and optical properties of ZnO thin films

Effect of In, Al and Sn dopants on the optical and structural properties of ZnO thin films have been investigated by X-ray diffraction technique and optical characterization method. X-ray diffraction patterns confirm that the films have polycrystalline nature. The thin films have (002) as the preferred orientation. This (002) preferred orientation is due to the minimal surface energy which the hexagonal structure, c-plane to the ZnO crystallites, corresponds to the densest packed plane. The grain size values of the films are found to be 29.0, 35.2 and 39.5 nm for In, Al and Sn doped ZnO thin films, respectively. The optical band gaps of the films were calculated. The absorption edge shifts to the lower wavelengths with In, Al and Sn dopants. The inclusion of dopant into films expands also width of localized states as E(UIn)>E(UAl)>E(USn). The refractive index dispersion curves obey the single oscillator model. The dispersion parameters and optical constants of the films were determined. These parameters changed with In, Al and Sn dopants.     

Structural, optical, and magnetic properties of Mn-doped ZnO thin film

The Zn(1-x)Mn(x)O (x = 0, 0.16, and 0.25) thin films were grown on fused quartz substrates by reactive magnetron cosputtering. X-ray-diffraction measurement revealed that all the films were single phase and had wurtzite structure with c-axis orientation. As Mn concentration increased in the Zn(1-x)Mn(x)O films, the c-axis lattice constant and band-gap energy increased gradually. In Raman-scattering studies, an additional Mn-related vibration mode appeared at 520 cm(-1). E(2H) phonon line of Zn(1-x)Mn(x)O alloy was broadened asymmetrically and redshifted as a result of microscopic structural disorder induced by Mn(2+) random substitution. The Zn(0.84)Mn(0.16)O film exhibited a ferromagnetic characteristic with a Curie temperature of approximately 62 K. However, with increasing Mn concentration to 25 at. %, ferromagnetism disappeared due to the enhanced antiferromagnetic superexchange interactions between neighboring Mn(2+) ions.     

Green synthesis of graphene nanosheets/ZnO composites and electrochemical properties

A green and facile approach was demonstrated to prepare graphene nanosheets/ZnO (GNS/ZnO) composites for supercapacitor materials. Glucose, as a reducing agent, and exfoliated graphite oxide (GO), as precursor, were used to synthesize GNS, then ZnO directly grew onto conducting graphene nanosheets as electrode materials. The small ZnO particles successfully anchored onto graphene sheets as spacers to keep the neighboring sheets separate. The electrochemical performances of these electrodes were analyzed by cyclic voltammetry, electrochemical impedance spectrometry and chronopotentiometry. Results showed that the GNS/ZnO composites displayed superior capacitive performance with large capacitance (62.2 F/g), excellent cyclic performance, and maximum power density (8.1 kW/kg) as compared with pure graphene electrodes. Our investigation highlight the importance of anchoring of small ZnO particles on graphene sheets for maximum utilization of electrochemically active ZnO and graphene for energy storage application in supercapacitors.     

A simple solvothermal route towards the morphological control of ZnO and tuning of its optical and photocatalytic properties

ZnO nanoparticles with different morphologies were solvothermally synthesized by controlling the alkali (sodium hydroxide) concentration in an isopropanol solution. The products were characterized by means of powder X-ray diffraction, UV-visible absorption spectra, scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction. The morphologies of the formed ZnO nanocrystals were dependent on the concentration of the alkali, and with increases of sodium hydroxide concentration, the ZnO nanocrystals evolved from rod to hexagonal bipyramid, and then to a flower-like nanostructure. The flower-like nanostructure resulted from the etching of the hexagonal bipyramid by the excess alkali. The photoluminescence and photocatalytic properties of the prepared ZnO were investigated. The difference of green emission among the ZnO nanocrystals indicated that a higher sodium hydroxide concentration led to a higher level of defects. The size, the surface structure and defects in the ZnO nanocrystals affected its photo-degradation characteristics.     

Influence of different precursors and Mn doping concentrations on the structural,optical properties and photocatalytic activity of single-crystal manganese-doped ZnO

Mn-doped ZnO single-crystal micronuts were synthesized via hydrothermal method in an hexamethylenetetramine aqueous solution. These micronuts are of wurtzite crystal structure. The effects of Mn doping amount and precursor concentration on the structural, optical properties and photocatalytic activity have been investigated. The synthesized Mn-doped ZnO was characterized by X-ray powder diffraction, field emission scanning electron microscopy (FESEM), UV–Vis absorption and photoluminescence spectroscopy. The structural analyses based on X-ray diffraction revealed the absence of Mn-related secondary phases. According to FESEM results, the length of ZnO micronuts was in the range of 5–8 μm. The band gap energy increased on increasing Mn doping concentration. The photocatalytic activity was studied by degradation of methyl orange aqueous solution, which showed that the Mn-doped ZnO micronuts prepared in precursor concentration of 0.1 M and 4% Mn doping had the highest photocatalytic activity. The effects of crystal defect and band gap energy on photocatalytic activity of Mn-doped ZnO samples were studied in different precursors and Mn doping amounts.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Cerium-doped mesoporous BaTiO3/TiO2 nanocomposites: structural,optical and photocatalytic properties

Research on Chemical Intermediates - Nanoscale composite materials based on cerium, barium titanate and titanium dioxide were synthesized by thermal hydrolysis. The obtained individual TiO2, BaTiO3...     

Luminescent silicate core-shell nanoparticles: synthesis, functionalization, optical, and structural properties

SiO(2)/Zn(2)SiO(4):Mn(2+) core-shell nanoparticles with mean diameters in the range of 55-220 nm were prepared by a modified Pechini sol-gel method followed by lyophilization and annealing at temperatures of 800-1100°C. The as-synthesized nanoparticles were characterized by transmission electron microscopy, X-ray diffraction analysis, and photoluminescence spectroscopy. The results demonstrate that the crystal structure of the shell and the optical properties can be tuned by the annealing temperature and a variation of the concentration of doping ions. Under UV excitation, the samples emit green luminescence with its maximum at 525 nm, typical for the Mn(2+) ions in α-Zn(2)SiO(4). The resulting nanoparticles were successfully modified with amine and carboxyl functions with respect to a later attachment of biological moieties.     

Structural and optical properties of ZnO thin films by the spin coating Sol-Gel method

ZnO thin films were deposited onto glass subsrates by a Sol-gel spin coating method. The structural and optical properties of ZnO thin films were investigated. The molar ratios of the zinc acetate dihydrate to Monoethanolamine were maintained 1:1. The as-grown film was sintered 250 °C for 10 min, then annealed in air at 500 °C for 30 min. The XRD results indicate that ZnO films were strongly oriented to the c-axis of the hexagonal nature. Absorption measurements were carried out as a function of temperature with 10 K steps in the range 10–320 K. The band gap energy was measured 3.275 and 3.267 eV for 0.5 and 1.0 molarity (M) ZnO thin films at 300 K. The steepness parameters were observed between 10 and 320 K and their extrapolations converged at (E₀, α₀) = 3.65 eV, 172,819 cm⁻¹ and 3.70 eV, 653,436 cm⁻¹ for 0.5 and 1.0 M ZnO thin films, respectively.     

Ga-assisted synthesis and optical properties of ZnO submicron- and nanotowers

Tower-like ZnO submicron- and nanostructures were synthesized by simply evaporating a mixture of Zn and Ga. Scanning electron microscopy and transmission electron microscopy observations showed that the regular hexagonal tower-like structure is likely to be made up in a layer-by-layer fashion and consist of sheets. According to our experiments, the amount of Ga has a large effect on their morphologies. The growth of such tower-like structures is ascribed to the vapor-solid mechanism. The introduction of Ga hinders the growth of ZnO along the [0001] direction, resulting in the formation of the novel tower-like structures. In addition, the photoluminescence of such structures shows a strong green-light emission.     

Facile synthesis of flat crystal ZnO thin films by solution growth method: A micro-structural investigation

Flat crystal ZnO thin films were prepared by chemical bath deposition technique onto glass substrates. XRD patterns of the films deposited at about 80 °C and annealed at 200 °C for 1 h in oxygen environment revealed the existence of polycrystalline hexagonal wurtzite phase with c-axis orientation of crystallites in the films. The crystallite size and lattice strain from X-ray line broadening profile were evaluated using the Scherrer method and Williamson–Hall method. Structural parameters such as dislocation density, stacking faults probability, lattice constants, lattice stress, unit cell volume, internal parameter, texture and number of crystallites per unit area have also been calculated. Surface morphology of the films was analyzed by scanning electron microscopy and atomic force microscopy. Photoluminescence spectrum at room temperature exhibited two luminescence centers, one is for UV emission (near band edge emission) located at 3.18 eV and another is for deep level emission located at 2.56 eV.     

Room-temperature synthesis of pompon-like ZnO hierarchical structures and their enhanced photocatalytic properties

In this paper, an efficient and simple route combined with a subsequent calcining process to synthesize pompon-like ZnO microstructures at room temperature (25 °C) has been developed. The samples were intensively investigated by SEM, TEM, HRTEM, and XRD. The results indicate that the well-crystallized pompon-like ZnO is assembled by interlaced nanoplates with uniform thickness of about 50 nm. The photocatalytic trials confirm that the pompon-like ZnO exhibits excellent degradation efficiency under UV light. Moreover, the as-prepared ZnO samples show superior durability and stability after six photodegradation cycling runs. Finally, a mechanism was proposed to elucidate the photodegradation reaction of the pompon-like ZnO.     

Soft template synthesis of ZnO nanorods and their optical properties

A simple solution route was developed to fabricate monodisperse wurtzite ZnO nanorods. The as-prepared samples were 5 ??m in length and 70?C100 nm in diameter. The crystallinity, morphology, and structure of the rod-like ZnO microcrystals were examined. The crystal phases and the microstructure of the nanorods were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Room- and low-temperature photoluminescence (PL) and Raman spectra were employed to investigate the surface states of the samples. The deep-level emission band was barely observable at both room and cryogenic temperatures.     

Microwave-assisted solution synthesis and photocatalytic activity of Ag nanoparticles supported on ZnO nanostructure flowers

Ag nanoparticles supported on the surface of three-dimensional (3D) flower-like ZnO nanostructure were synthesized by a microwave-assisted solution method. The obtained products were characterized by X-ray diffraction analysis, field-emission scanning electron microscopy, Fourier-transform infrared spectroscopy, Raman spectrophotometry, X-ray photoelectron spectroscopy, and photoluminescence spectroscopy. The analytical results confirmed homogeneously distributed Ag nanoparticles supported on the surface of flower-like ZnO nanostructure. The photocatalytic effect of the heterostructure Ag/ZnO nanocomposites was investigated using photodegradation under ultraviolet (UV) light of methylene blue as model dye. The heterostructure Ag/ZnO nanocomposites exhibited much higher photocatalytic activity than pure ZnO flowers. The improved photocatalytic properties are attributed to formation of a Schottky barrier at the metal–semiconductor interface of the Ag/ZnO nanocomposites.     

A study on solution deposited CuSCN thin films: Structural,electrochemical, optical properties

A cost-effective successive ionic layer adsorption and reaction (SILAR) method was used to deposit copper (I) thiocyanate (CuSCN) thin films on glass and steel substrates for this study. The deposited thin films were characterized for their structural, morphological, optical and electrochemical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible spectroscopy and VersaSTAT potentiostat. A direct band gap of 3.88 eV and 3.6 eV with film thickness of 0.7 μm and 0.9 μm was obtained at 20 and 30 deposition cycles respectively. The band gap, microstrain, dislocation density and crystal size were observed to be thickness dependent. The specific capacitance of the CuSCN thin film electrode at 20 mV/s was 760 F g⁻¹ for deposition 20 cycles and 729 F g⁻¹ for deposition 30 cycles.