First principles study of the electronic and optical properties of SbTaO4

The electronic density of states (DOS), band structure and optical properties of orthorhombic SbTaO₄ are studied by first principles full potential-linearized augmented plane wave (FP-LAPW) method. The calculation is done in the framework of density functional theory with the exchange and correlation effects treated using generalized gradient approximation (GGA). We find an indirect band gap of 1.9 eV at the R→Γ symmetry direction of the Brillouin zone in SbTaO₄. It is observed that there is a strong hybridization between Ta-5d and O-2p electronic states which is responsible for the electronic properties of the system. Using the projected DOS and band structure we have analyzed the interband contribution to the optical properties of SbTaO₄. The real and imaginary parts of the dielectric function of SbTaO₄ are calculated, which correspond to electronic transitions from the valence band to the conduction band. The band gap obtained is in close agreement with the experimental data.     

Theoretical investigation of Cu-containing materials with different valence structure types: BaCu2S2, Li2CuSb,and LiCuS

Optoelectronics research requires cheap materials with a broad spectrum of optical, electronic, and structural properties. The class of Heusler compounds and ternary structures provide many possibilities for finding alternative group IV and III–V semiconductor compounds. This study introduces wider band gap materials for use in solar cells as an alternative to cadmium sulfide buffer layers. The buffer layer is inserted between the absorber layer (p-type) and the transparent window layer (n-type) to enhance the maximum amount of light transmission. Reasonable calculations are reported for the band gaps of copper-containing materials: LiCuS, BaCu₂S₂, and Li₂CuSb. Previous optical analysis measurements of these films determined that the band gaps were 1.8 and 1.9 eV for BaCu₂S₂ and LiCuS, respectively. In general, semiconductor compounds have been studied theoretically, but there are major differences between the experimental and theoretically calculated band gaps. A suitable calculation method for semiconductor compounds is described in this study. For the first time, calculations based on the Engel and Vosko method are introduced for these semiconductor compounds. This method yields band gaps that are comparable to the experimental values, which facilitate the development of microscopic analyses of these compounds. Direct band gaps of 1.15 and 1.7 eV were obtained for BaCu₂S₂ and LiCuS, respectively, whereas the indirect band gap was 0.7 eV for Li₂CuSb.     

Electronic structure and optical properties of Sb2S3 crystal

The electronic and optical properties of Sb₂S₃ are studied using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in Wien2k. In this approach, the alternative form of the generalized gradient approximation (GGA) proposed by Engel and Vosko (EV-GGA) was used for the exchange correlation potential. The calculated band structure shows a direct band gap. The contribution of different bands was analyzed from total and partial density of states curves. Moreover, the optical properties, including the dielectric function, absorption spectrum, refractive index, extinction coefficient, reflectivity and energy-loss spectrum are all obtained and analyzed in detail.     

Electronic structure and optical properties of wurtzite-kesterite Cu2ZnSnS4

As promising light-absorber material for solar cells, Cu₂ZnSnS₄ was found to have another crystal structure (wurtzite-kesterite) in addition to the conventional zinc blende-kesterite structure. Structural flexibility of Cu₂ZnSnS₄ opens up an avenue to develop light-absorber material with novel exciting properties and applications. However, its electronic and optical properties have not been comprehensively studied yet. For this purpose, the method of density functional theory within hybrid functional of PBE0 was adopted to study the structural, electronic, and optical properties of wurtzite-kesterite Cu₂ZnSnS₄ in this Letter. The calculated results suggested that the energy of its band gap is about 1.372 eV and it has obvious optical anisotropy. Furthermore, its crystal structure leads local internal fields that are especially beneficial to suppress the recombination of photoexcited electron–hole pairs.     

Sn1−xBixO2 and Sn1−xTaxO2 (0≤x≤0.75): A first-principles study

The structural, elastic, electronic and optical (x=0) properties of doped Sn_1−xBi_xO₂ and Sn_1−xTa_xO₂ (0≤x≤0.75) are studied using the first-principles pseudopotential plane-wave method within the local density approximation. The independent elastic constants C_ij and other elastic parameters of these compounds have been calculated for the first time. The mechanical stability of the compounds with different doping concentrations has also been studied. The electronic band structure and density of states are calculated and the effect of doping on these properties is also analyzed. It is seen that the band gap of the undoped compound narrowed with dopant concentration, which disappeared for x=0.26 for Bi doping and 0.36 for Ta doping. The materials thus become conductive oxides through the change in the electronic properties of the compound for x≤0.75, which may be useful for potential application. The calculated optical properties, e.g. dielectric function, refractive index, absorption spectrum, loss-function, reflectivity and conductivity of the undoped SnO₂ in two polarization directions are compared with both previous calculations and measurements.     

第一性原理研究Fe掺杂SnO2材料的光电性质

采用基于第一性原理的线性缀加平面波(FP-LAPW)方法,研究Fe掺杂SnO₂材料电子结构和光学性质,包括电子态密度、能带结构、介电函数和其他一些光学图谱. 研究结果表明,掺Fe后材料均属于直接跃迁半导体,且呈现半金属性;随掺杂浓度增加,费米能级进入价带,带隙逐渐减小,Fe原子之间耦合作用增强;通过掺杂能够在一定程度上改变成键性质,使其具有金属键性质. 光学谱线(吸收谱、消光系数等)与介电函数虚部谱线相对应,均发生蓝移,各峰值与电子跃迁吸收有关,从理论上指出光学性质和电子结构的内在联系. 关键词： 能带结构 态密度 光学性质 介电函数     

The electronic and optical properties of Cu doped CdI2

Based on the density functional pseudopotential method, the electronic structures and the optical properties of CdI₂ doped with Cu are investigated in detail. The calculation results indicate that the defect of Cu(Cd) exists steadily with a certain solubility. For the Cu doped CdI₂, the new highly localized impurity bands induced by Cu 3d states lie just across the Fermi energy at the top of the valence band. The doping of Cu induces reduction of band gap of CdI₂; red shifts are revealed in both the imaginary part of dielectric function and the absorption spectra corresponding to the change in band gaps. Moreover, the study of the reflection spectrum and the loss function shows that the doped Cu is responsible for the increased reflection peak intensity and the red shift of the plasma resonant frequency of CdI₂.     

Structural,electronic and optical properties of Ca3Bi2: First-principles investigation

In this work by applying first principles calculations structural, electronic and optical properties of Ca₃Bi₂ compound in hexagonal and cubic phases are studied within the framework of the density functional theory using the full potential linearized augmented plane wave (FP-LAPW) approach. According to our study band gap for Ca₃Bi₂ in hexagonal phase are 0.47, 0.96 and 1?eV within the PBE-GGA, EV-GGA and mBJ-GGA, respectively. The corresponding values for cubic phase are 1.24, 2.08 and 2.14?eV, respectively. The effects of hydrostatic pressure on the behavior of the electronic properties such as band gap, valence bandwidths and anti-symmetry gap are investigated. It is found that the hydrostatic pressure increases the band widths of all bands below the Fermi energy while it decreases the band gap and the anti-symmetry gap. In our calculations, the dielectric tensor is derived within the random phase approximation (RPA). The first absorption peak in imaginary part of dielectric function for both phases is located in the energy range 2.0–2.5?eV which are beneficial to practical applications in optoelectronic devices in the visible spectral range. For instance, hexagonal phase of Ca₃Bi₂ with a band gap around 1?eV can be applied for photovoltaic application and cubic phase with a band gap of 2?eV can be used for water splitting application. Moreover, we found the optical spectra of hexagonal phase are anisotropic along E||x and E||z.     

S掺杂对锐钛矿相TiO2电子结构与光催化性能的影响

采用基于第一性原理的平面波超软赝势方法研究了掺杂不同价态S的锐钛矿相TiO₂的晶体结构、杂质形成能、电子结构及光学性质.计算结果表明硫在掺杂体系中的存在形态与实验中的制备条件有关;掺杂后晶格发生畸变、原子间的键长及原子的电荷量也发生了变化,导致晶体中的八面体偶极矩增大; S 3p态与O 2p态、Ti 3d态杂化而使导带位置下移、价带位置上移及价带宽化,从而导致TiO₂的禁带宽度变窄、光吸收曲线红移到可见光区.这些结果很好地解释了S掺杂锐钛矿相TiO₂在可见光下具有优良的光催化性能的内在原因.根据计算结果分析比较了硫以不同离子价态掺杂对锐钛矿相TiO₂电子结构和光催化性能影响的差别. 关键词： 2')" href="#">锐钛矿相TiO₂ S掺杂 第一性原理 光催化性能     

Oxygen vacancy in N-doped Cu2O crystals: A density functional theory study

The N-doping effects on the electronic properties of Cu2O crystals are investigated using density functional theory. The calculated results show that N-doped Cu2O with or without oxygen vacancy exhibits different modifications of electronic band structure. In N anion-doped Cu2O, some N 2p states overlap and mix with the O 2p valence band, leading to a slight narrowing of band gap compared with the undoped Cu2O. However, it is found that the coexistence of both N impurity and oxygen vacancy contributes to band gap widening which may account for the experimentally observed optical band gap widening by N doping.     

Effects of native defects on the electronic structure and photocatalytic activity in anatase TiO2 by first principles calculations

The crystal structure, electronic structure, optical properties and photocatalytic activity of the native defects in anatase TiO₂ were investigated based on the density-functional theory (DFT). The results show that oxygen vacancies (V_O) have the lowest formation energy, and thus are easiest to form in the bulk structure. The conduction and valence band moves to the high or low energy region, and the energy gap becomes narrower for the native point defect models. In particular, oxygen interstitials (O_i) have a direct band gap, and new gap states appear in the band gap, which can be responsible for the high photocatalytic efficiency in anatase TiO₂. The phenomenon of “impurity compensation” takes place for the oxygen and titanium interstitials. Ti vacancy (V_Ti) can promote the utilization of solar light by analyzing the absorption spectra. All the calculated results show that O_i and V_Ti are beneficial in improving the photocatalytic activity of TiO₂ in the UV–visible light range.     

First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2

We perform first-principles calculations to investigate the band structure, density of states, optical absorption, and the imaginary part of dielectric function of Cu, Ag, and Au-doped anatase TiO₂ in 72 atoms systems. The electronic structure results show that the Cu incorporation can lead to the enhancement of d states near the uppermost of valence band, while the Ag and Au doping cause some new electronic states in band gap of TiO₂. Meanwhile, it is found that the visible optical absorptions of Cu, Ag, and Au-doped TiO₂, are observed by analyzing the results of optical properties, which locate in the region of 400-1000 nm. The absorption band edges of Cu, Ag, and Au-doped TiO₂ shift to the long wavelength region compared with the pure TiO₂. Furthermore, according to the calculated results, we propose the optical transition mechanisms of Cu, Ag, and Au-doped TiO₂. Our results show that the visible light response of TiO₂ can be modulated by substitutional doping of Cu, Ag, and Au.     

ReSi1.75电子结构的第一性原理研究

基于第一性原理全势线性缀加平面波方法和局域密度近似(LDA)，对ReSi_1.75的基态晶格属性进行了研究. 结构优化的结果表明，ReSi_1.75的基态平衡晶格常数比实验值小约0.6%. 在LDA计算基础上，考虑局域的Re的d电子库仑作用，用LDA+U方法计算了ReSi_1.75的电子结构，发现当U_eff=U-J=4.4eV时，能带结构呈半导体性质. 具有0.12eV 关键词： 1.75')" href="#">ReSi_1.75 局域密度近似 自相互修正作用 电子结构     

First-principle study on the electronic and optical properties of Mn-doped SnO2

Using the full-potential linearized augmented plane wave method (FP-LAPW), we have investigated the electronic and optical properties of Sn_1−xMn_xO₂ (x=0, 0.0625, 0.125, 0.1875, 0.25). The doped Mn results in reduction of the band gap, which can be attributed to a series of impurity bands at the bottom of the conduction band caused by the strong hybridization between Mn 3d and O 2p. The results also show that the Mn-doped systems tend to convert into p-type semiconductor with direct band gaps. With the increase of Mn concentration, both the imaginary part of dielectric function and the absorption spectrum show red-shift corresponding to the change of band gaps.     

First-principles calculations of the electronic and optical properties of In6S7 compound

The electronic structure and the optical properties of In₆S₇ crystal are calculated by the first-principles full-potential linearized augmented plane wave method (FP-LAPW) using density functional theory (DFT) in its generalized gradient approximation (GGA). The calculated band structure shows that the In₆S₇ is a semiconductor with a direct band gap in good agreement with experimental studies. Furthermore, the dielectric tensor and the optical properties, such as absorption coefficient, refractive index, extinction coefficient, energy-loss spectrum and reflectivity, are derived and analyzed in the study.     

二维GaTe/Bi2Se3异质结：一类有潜力的Z型光解水催化剂

本文基于第一性原理方法,计算了二维GaTe/Bi₂Se₃异质结的电子结构、界面电荷转移、静电势分布、吸收光谱及光催化性质. 计算结果表明异质结是一个小能隙的准直接半导体,能有效捕获太阳光. 由于相对较强的界面內建极化电场和带边轻微弯曲,导致异质结中的光生电子和空穴分别有效分离在GaTe单层和Bi₂Se₃薄片上,可用于析氢和产氧. 这些理论计算结果意味着二维GaTe/Bi₂Se₃异质结是一类有潜力的Z型太阳能全解水催化剂.     

First principles study on electronic structure of β-Ga2O3

We have studied the electronic structure of β-Ga₂O₃ using the first principles full-potential linearized augmented plane wave method. It is found that β-Ga₂O₃ has an indirect band gap with a conduction band minimum (CBM) at Γ point and a valence band maximum on the E line. The anisotropic optical properties are explained by the selection rule of the band-to-band transitions. On the other hand, the shape of the CBM is almost isotropic and, therefore, the observed electronic anisotropy in the n-type semiconducting state should not be attributed to the properties of a perfect lattice. The Burstein-Moss shift is discussed using the effect of several allowed transitions between the levels of the valence band and the CBM.     

DFT study on electronic structure and optical properties of N-doped,S-doped,and N/S co-doped SrTiO3

The electronic structures and optical properties of N-doped, S-doped and N/S co-doped SrTiO₃ have been investigated on the basis of density functional theory (DFT) calculations. Through band structure calculation, the top of the valence band is made up of the O 2p states for the pure SrTiO₃. When N and S atoms were introduced into SrTiO₃ lattice at O site, the electronic structure analysis shows that the doping of N and S atoms could substantially lower the band gap of SrTiO₃ by the presence of an impurity state of N 2p on the upper edge of the valence band and S 2p states hybrid with O 2p states, respectively. When the N/S co-doped, the energy gap has further narrowing compared with only N or S doped SrTiO₃. The calculations of optical properties also indicate a high photo response for visible light for N/S co-doped SrTiO₃. Besides, we find a new impurity state which separates from the O 2p states could improve the photocatalytic efficiency and we also propose a model for light electron-hole transportation which can explain the experiment results well. All these conclusions are in agreement with the recent experimental results.     

Structural, electronic and thermodynamic properties of cubic Zn3N2 under high pressure from first-principles calculations

The structural, electronic and thermodynamic properties of cubic Zn₃N₂ under hydrostatic pressure up to 80 GPa are investigated using the local density approximation method with pseudopotentials of the ab initio norm-conserving full separable Troullier-Martin scheme in the frame of density functional theory. The structural parameters obtained at ambient pressure are in agreement with experimental data and other theoretical results. The change of bond lengths of two different types of Zn-N bond with pressure suggests that the tetrahedral Zn-N bond is slightly less compressible than the octahedral bond. By fitting the calculated band gap, the first and second order pressure coefficients for the direct band gap ofthe Zn₃N₂ were determined to be 1.18×10⁻² eV/GPa and −2.4×10⁻⁴ eV/(GPa)², respectively. Based on the Mulliken population analysis, Zn₃N₂ was found to have a higher covalent character with increasing pressure. As temperature increases, heat capacity, enthalpy, product of temperature and entropy increase, whereas the Debye temperature and free energy decrease. The present study leads to a better understanding of how Zn₃N₂ materials respond to compression.     

First-principles study of structural, mechanical, electronic and optical properties of 3R- and 2H-CuGaO2

We calculated the structural parameters, elastic, mechanical, electronic and optical properties of 3R- and 2H-CuGaO₂ using the first-principles density-functional theory. The results show that the structural parameters of two phases are in good agreement with previous theoretical and experimental data. Two phases are mechanically stable, behave in ductile manner and have indirect band gap. The analyses of electronic structures and charge densities of two phases show mainly covalent nature in Cu-O bonds and coexistence of both ionic and covalent nature in Ga-O bonds. The optical properties are obtained and discussed, including the complex dielectric function, refractive index, extinction coefficient, optical reflectivity, absorption coefficient, energy-loss spectrum and complex conductivity function, which provide useful information for the future applications of CuGaO₂.