Aggregation of ionic liquids [C(n)mim]Br (n = 4, 6, 8, 10, 12) in D2O: a NMR study

Aqueous solutions of five ionic liquids (ILs) of the 1-n-alkyl-3-methylimidazolium bromide family, [C(n)mim]Br (n = 4, 6, 8, 10, 12), were investigated by NMR measurements at 298.2 K as a function of IL concentrations. Critical aggregation concentrations and aggregation numbers of these ILs were determined by 1H NMR except for [C4mim]Br in D2O. The effects of the alkyl chain length of the cations were examined on the aggregation behavior of the ILs. 1H NMR data of the solvent D2O were used to investigate the hydration of the ILs in D2O, and it was found that the ionic hydration and the cation-anion association or aggregation of the ILs offset each other. The microenvironment of different protons of cations of the ILs in the aggregates was probed by determining the spin-lattice relaxation rate (1/T1). It is suggested that the imidazolium rings in the aggregates are exposed to water and that the molecular motion of the aggregates is more restricted than that of the monomers of the ILs. Furthermore, a stair-like microscopic aggregation structure is suggested for the [C(n)mim]Br/D2O (n = 6, 8, 10) systems from 2-D 1H-1H NOESY measurements.     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Separation of ternary systems of hydrophilic ionic liquid with miscible organic compounds by RPLC with refractive index detection

A rapid and simple analytical method was developed for the simultaneous and quantitative determination and separation of hydrophilic imidazolium ionic liquids (ILs) (1-butyl-3-methylimidazolium chloride, [C(4)mim]Cl; 1-hexyl-3-methylimidazolium chloride, [C(6)mim]Cl; 1-octyl-3-methylimidazolium chloride, [C(8)mim]Cl; 1-allyl-3-methylimidazolium chloride, [Amim]Cl; or 1-allyl-3-methylimidazolium bromide, [Amim]Br) with miscible ethyl acetate and EtOH and their mixtures using reverse phase liquid chromatography coupled with refractive index detection (RPLC-RI). The influence of 60 to 100% (volume percentage) methanol in the mobile phase on the IL systems ([C(4)mim]Cl, [C(6)mim]Cl, [C(8)mim]Cl, [Amim]Br, or [Amim]Cl)-ethyl acetate-EtOH was investigated. The optimum mobile phase for the system [C(8)mim]Cl-ethyl acetate-EtOH, [C(4)mim]Cl-ethyl acetate-EtOH, [Amim]Br-ethyl acetate-EtOH and [Amim]Cl-ethyl acetate-EtOH was methanol/water (60:40, v/v), and methanol/water (70:30, v/v) for [C(6)mim]Cl-ethyl acetate-EtOH. Under optimum mobile phase conditions for each system, the RSD of the retention time ranged from 0.02 to 0.04%, and the RSDs of the peak area percent ranged from 0.23 to 1.85%, which showed good reproducibility of the RPLC-RI method. The RPLC-RI method can determine IL, ethyl acetate, and EtOH simultaneously in 5 min, and the analytes, especially IL, can be eluted completely. The results show that the RPLC-RI method can be used to separate and determine ILs in mixtures with organic compounds simultaneously and quantitatively.     

Solvent-free Synthesis, Crystal Structure and Thermal Stability of Ionic Liquid 1-Hexadecyl-3-methylimidazolium Bromide

Ionic liquid 1-hexadecyl-3-methylimidazolium bromide [C16mim]Br was synthesized by solvent-free alkylation of N-methylimidzole with hexadecyl bromide. A large transparent single crystal of 1-hexadecyl-3-methylimidazolium bromide monohydrate （[C16mim]Br·H2O）, 4 mm in length, was firstly obtained in the water-trichloromethane-toluene growth system （Vwater＇Vtrichloromethane＇Vtoluene = 0.1：1：2）. The crystal structure was determined by single-crystal X-ray diffraction method. It crystallizes in the triclinic system, space group P1, with a = 5.4962（15）, b = 7.839（2）, c = 27.279（8） A, α = 94.375, β = 91.500, γ = 101.999°, Z = 2, V = 1145.2（5） A3, C20H41BrN2O, Mr = 405.46, Dc = 1.176 Mg/m3, μ = 1.804 mm^-1, F（000） = 436, the final R = 0.0523 and wR = 0.1345. The 3D supramolecular structure is constructed through weak interactions between imidazolium cations, Br- anions and lattice water molecules. The long alkyl chain to the imidazolium ring and lattice water molecules play an important role in the self-assembly process. Moreover, it is proposed that [C16mim]Br in water has aggregation behavior and the possible self-assembled structure is the interdigitated pattern. Finally, thermal stability of [C16mim][Br]·H2O was also studied by DSC and TGA analysis.     

Ionic Liquid-Induced Structural and Activity Changes in Hen Egg White Lysozyme

Lysozyme crystals in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim]BF₄), 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl), 1-butyl-3-methylimidazolium bromide([C₄mim]Br), and 1,3-dimethylimidazolium iodine([dmim]I) were prepared, and the influence of ionic liquids (ILs) on the structure and activity change of lysozyme was investigated. Fourier transform infrared spectroscopy revealed the major secondary structures of α-helix and β-sheet for lysozyme. It was interesting to note that increases of the band near 2,935 and 1,656 cm^?1 from Raman spectroscopy are attributed to the unfolding of lysozyme molecules. A shift in amide III from 1,230 to 1,270 cm^?1 in adding [dmim]I occurs, indicating a transformation from β-sheet to random coil. With regard to adding [C₄mim]BF₄, [C₄mim]Cl, and [C₄mim]Br, α-helix and β-sheet are the predominant structures for lysozyme. The activity study showed that the ILs used brought a positive effect. Especially, [dmim]I leads to a drastic increase in relative activity, and its value reaches 50 %.     

Effects of methylation at position 2 of cation ring on rotational dynamics of imidazolium-based ionic liquids investigated by NMR spectroscopy: [C4mim]Br vs [C4C1mim]Br

We investigated the rotational dynamics of two imidazolium-based ionic liquids, 1-butyl-3-methylimidazolium bromide ([C(4)mim]Br) and 1-butyl-2,3-dimethylimidazolium bromide ([C(4)C(1)mim]Br), to reveal the effects of methylation at position 2 of the imidazolium ring (C(2) methylation). The rotational correlation time (τ(local)) for each carbon in the cations is derived from the spin-lattice relaxation time of (13)C nuclear magnetic resonance. The τ(local) results obtained here provide three principle insights into the rotational dynamics of ionic liquids. First, all τ(local) values for [C(4)C(1)mim]Br are greater than those for [C(4)mim]Br owing to a viscosity increase due to C(2) methylation. Second, the rate of change in τ(local) on C(2) methylation differs among the carbons in the cation, which indicates that each carbon has a different microviscosity. Third, the τ(local) increase in the (13)C at the root of the butyl group on C(2) methylation is very small compared to both intuitive prediction and the results from quantum chemical calculations. This indicates that the motion of the butyl group root in [C(4)C(1)mim]Br is not significantly inhibited by the methyl group at the position 2 of the imidazolium ring. The finding provides conclusive information on the origin of the increases in the melting point on C(2) methylation. Hunt previously found through calculation that decreases in entropy are caused by two factors, namely, reductions in the rotational mobility of the butyl group and in the number of stable anion interaction sites with C(2) methylation, resulting in an increase in melting point and viscosity. Our finding experimentally illustrates that the origin of the increases in melting point is not the inhibition of butyl group motion and that the reduction in stable anion interaction sites plays a major role in the increases. Additionally, it is suggested that the viscosity increase on C(2) methylation can be interpreted in the same manner.     

离子液体{[C16mim]Br}辅助CdS纳米球的制备

以CdCl2·2.5H2O和Na2S2O3为原料,在[C16mim]Br离子液体中合成了CdS纳米球(1),其结构和性能经XRD和TEM表征。考察了c{[C16mim]Br}对1形貌的影响,结果表明,通过控制c{[C16mim]Br},可制得分散性较好,粒径在50 nm～80 nm的1。     

Study on the Conductivities of Pure and Aqueous Bromide-Based Ionic Liquids at Different Temperatures

Electrical conductivities were measured for the pure ionic liquids [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and [C₈mim][Br] (1-octyl-3-methylimidazolium bromide) at 0.1 MPa from 293.15 to 333.15 K. Conductivity measurements were also made for the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems and their ternary water + [C₆mim][Br] + [C₈mim][Br] system at 0.1 MPa and 293.15, 298.15, and 303.15 K. The conductivity data of the pure ionic liquids were correlated by the VFT (Vogel-Tamman-Fulcher) equation, and the fitting parameters and mean absolute deviations were determined. New explanations are presented for the molality-dependent behavior of the conductivity of the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems. The generalized Young’s rule and the semi-ideal solution theory for conductivity were used to predict the conductivities of the ternary water + [C₆mim][Br] + [C₈mim][Br] system from the conductivities of its corresponding binary water + [C₆mim][Br] and water + [C₈mim][Br] subsystems. The predictions are in good agreement with the measured values.     

Phase Behavior of Ionic Liquids-Cesium Carbonate-Water Aqueous Two-phase Systems and Their Extraction of L-Tryptophan

Phase behavior and extraction ability of aqueous two-phase systems(ATPs) consisting of ionic liquids(ILs), Cs₂CO₃ and water were investigated in this paper. Four kinds of ionic liquids, namely, 1-amyl-3-methylimidazolium bromide([C₅mim]Br), 1-hexyl-3-methylimidazolium bromide([C₆mim]Br), 1-heptyl-3-methylimidazolium bromide ([C₇mim]Br) and 1-octyl-3-methylimidazolium bromide([C₈mim]Br), were examined to discuss the influence of alkyl groups. Binodal curves and tie-lines at 288.15, 298.15 and 308.15 K were obtained. The partitioning behavior for L-tryptophan in such ATPs was further investigated. The effect of temperature, pH, Cs₂CO₃ concentration and the structure of ionic liquids on the partitioning were discussed in detail.     

Modulation of the aggregation behaviour and physicochemical properties of 1-dodecyl-3-methylimidazolium bromide in aqueous solutions by β-CD

The modulation of aggregation behaviour of ionic liquids (ILs) in aqueous media is one of the important research topics. In the present work, aggregation behaviour of 1-dodecyl-3-methylimidazolium bromide ([C₁₂mim]Br) modulated by beta-cyclodextrin (β-CD) has been investigated by using conductivity, volume, fluorescence, dynamic light scattering and transmission electron microscopy techniques. The results suggested that the addition of β-CD significantly affects the aggregation of [C₁₂mim]Br in aqueous solutions. For example, the apparent critical micelle concentration increases with the increase of β-CD concentration; the average micellar size reduced with the increasing concentration of β-CD, and the process for micelle formation of [C₁₂mim]Br in aqueous β-CD solution is driven by entropy at lower temperature, while driven by enthalpy at higher temperature. It is expected that findings in this study would shed light on the potential applications of IL in supramolecular chemistry.     

Aggregation behavior of a model ionic liquid surfactant in monosaccharide + water solutions

Alkylimidazolium salts are a very important class of ionic liquids (ILs). The ILs containing long alkyl chains are a kind of model surfactants. In this paper, the aggregation behavior of 1-decyl-3-methylimidazolium chloride ([C(10)mim]Cl) was investigated for the first time in aqueous monosaccharide (glucose, galactose, xylose and arabinose) solutions by conductivity, fluorescence, NMR and dynamic light scattering (DLS). Thus a series of physico-chemical parameters for the aggregation of [C(10)mim]Cl-the critical aggregation concentration (CAC), ionization degree of the aggregates (α), the standard Gibbs energy of aggregation (ΔG(m)(0)), and the aggregation number (N) were derived from the experimental data. The results show that addition of small amounts of monosaccharides in aqueous solution can cause a variation in aggregation properties of the IL. The CAC values decrease with increasing molality of monosaccharides. In particular for different kinds of monosaccharides, we found that the CAC values are in the order: glucose>galactose (hexoses), xylose>arabinose (pentoses); xylose>glucose (1e2e3e4e), arabinose>galactoses (1e2e3e4a). These trends may be attributed to the slight difference in the stereo-structure of monosaccharide molecules. Finally a mechanism for the interaction of these monosaccharides with [C(10)mim]Cl was proposed.     

The highly crosslinked dimethacrylic/divinylbenzene copolymers

The thermal stability of the ionic liquids (ILs) 1-n-butyl-3-methylimidazolium bromide, [BMIM]Br, and 1-n-octyl-3-methylimidazolium bromide, [OMIM]Br, was evaluated through thermogravimetry (TG). Long-term isothermal TG studies revealed that both of these ILs exhibit appreciable decomposition even at temperatures significantly lower than the onset decomposition temperature, previously determined from fast scan TG experiments. The long-term TG studies of both the ILs showed linear mass loss as a function of time at each temperature of 10 °C interval in the range 533–573 K over a period of 10 h. The kinetics of isothermal decomposition of ILs was analyzed using pseudo-zero-order rate expression. The activation energies for the isothermal decomposition of [BMIM]Br and [OMIM]Br under nitrogen atmosphere are 219.86 and 212.50 kJ mol⁻¹, respectively. The moisture absorption kinetics of these ILs at 25 °C and 30% relative humidity (RH) and at 85 °C and 85% RH were also studied. Water uptake of ILs exposed at 25 °C/30%RH follows a simple saturation behavior in agreement with Weibull model while that at 85 °C/85%RH fortuitously fit into the Henderson–Pabis model.     

Phase separation in mixtures of ionic liquids and water

The phase separation of ionic liquids (ILs) in water is studied by laser light scattering (LLS). For the ILs with longer alkyl chains, such as [C(8)mim]BF(4) and [C(6)mim]BF(4) (mim = methylimidazolium), macroscopic phase separation occurs in the mixture with water. LLS also reveals the coexistence of the mesoscopic phase, the size of which is in the order of 100-800 nm. In aqueous mixtures of ILs with shorter alkyl chains, such as [C(4)mim]BF(4), only the mesoscopic phase exists. The mesoscopic phase can be effectively removed by filtration through a 0.22 μm filter. However, it reforms with time and can be enhanced by lowering the temperature, thus indicating that it is controlled by thermodynamics. The degree of mesoscopic phase separation can be used to evaluate the miscibility of ILs with water. This study helps to optimize the applications of ILs in related fields, as well as the recycling of ILs in the presence of water.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

Thermodynamic studies of ionic interactions in aqueous solutions of imidazolium-based ionic liquids [Emim][Br] and [Bmim][Cl

Experimental measurements of density at different temperatures ranging from 293.15 to 313.15 K, the speed of sound and osmotic coefficients at 298.15 K for aqueous solution of 1-ethyl-3-methylimidazolium bromide ([Emim][Br]), and osmotic coefficients at 298.15 K for aqueous solutions of 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) in the dilute concentration region are taken. The data are used to obtain compressibilities, expansivity, apparent and limiting molar properties, internal pressure, activity, and activity coefficients for [Emim][Br] in aqueous solutions. Experimental activity coefficient data are compared with that obtained from Debye-Hückel and Pitzer models. The activity data are further used to obtain the hydration number and the osmotic second virial coefficients of ionic liquids. Partial molar entropies of [Bmim][Cl] are also obtained using the free-energy and enthalpy data. The distance of the closest approach of ions is estimated using the activity data for ILs in aqueous solutions and is compared with that of X-ray data analysis in the solid phase. The measured data show that the concentration dependence for aqueous solutions of [Emim][Br] can be accounted for in terms of the hydrophobic hydration of ions and that this IL exhibits Coulombic interactions as well as hydrophobic hydration for both the cations and anions. The small hydration numbers for the studied ILs indicate that the low charge density of cations and their hydrophobic nature is responsible for the formation of the water-structure-enforced ion pairs.     

Binding Gibbs energy of ionic liquids to calf thymus DNA: a fluorescence spectroscopy study

The binding constants and binding Gibbs energies of [C(n)mim]Br (n = 4, 6, 8, 10, 12) and [C(4)mim][BF(4)] to calf thymus DNA-D1501 have been determined by the fluorescence measurements of the pyrene probe. It was found that values of the binding Gibbs energy decrease linearly with the increase of alkyl chain length of the ILs. Based on this observation, Gibbs energies for both the interaction between DNA and -CH(2)- of the ILs and the interaction between DNA and the cationic head group of the ILs have been reported. The result suggests that electrostatic interaction between DNA and the cationic head group of the ILs is predominant for the binding of the ILs with DNA although contribution from the non-electrostatic interaction between DNA and the alkyl chain of the ILs increases with increasing alkyl chain length of the ILs. The information obtained here may have application in the design of novel ILs-based DNA extraction/separation systems.     

NMR Investigation of Imidazolium‐Based Ionic Liquids and Their Aqueous Mixtures

¹H and ¹³C NMR spectroscopy is employed to investigate the interaction of water with two imidazolium‐based ionic liquids (ILs), 1‐hexyl‐3‐methylimidazolium bromide ([C₆mim]Br) and 1‐octyl‐3‐methylimidazolium bromide ([C₈mim]Br), at IL concentrations well above the critical aggregation concentration (CAC). The results are compared with those of the neat samples. To this aim, a detailed analysis of the changes in the ¹H chemical shifts, ¹³C relaxation parameters, and 2D ROESY data due to the presence of water is performed. The results for both neat ILs are consistent with a packed structure where head‐to‐head, head‐to‐tail, and tail‐to‐tail contacts occur and where the site of maximal mobility restriction is at the polar head. At the lowest investigated water content, the presence of water influences mainly the environment around the IL polar head, slowing down the motional dynamics of the aromatic ring with respect to the alkyl chain. At higher water contents this difference diminishes, the motional freedom of the whole molecule increasing. The presence of ROESY cross‐peaks between protons in the polar and apolar IL regions, as well as between protons in non‐neighboring alkyl groups, at all investigated water contents suggests that the alkyl tails are not fully segregated in hydrophobic domains, as expected for micelle‐like structures.     

离子液体表面活性剂1-丁基-3-甲基咪唑烷基硫酸酯的合成及其在水溶液中的聚集行为

采用离子交换法,由1-丁基-3甲基咪唑氯盐（C4mimCl）和烷基硫酸钠合成了一系列无卤素的阴离子表面活性离子液体—1-丁基-3-甲基咪唑烷基硫酸酯[C4mim][CnH2n 1SO4](n=8,12,16),利用表面张力仪、稳态荧光光谱等手段考察了表面活性离子液体在水溶液表面及体相中的聚集行为,结果表明,与传统无机反离子相比,有机咪唑阳离子[C4mim] 作为反离子的离子液体型表面活性剂具有较高的表面活性,[C4mim] 产生的氢键引起的抑制分子规则排列的作用小于其促进分子有序排列的疏水作用。长烷基链的阴离子是界面膜及胶束的主要组成成分,阴离子疏水烷基碳链的增长虽然可促进胶束的形成,但却在一定程度上抑制[C4mim] 离子参与界面或胶束的形成;阴离子所带烷基链越长,越不利于阳离子[C4mim]＋参与界面膜或胶束的形成,界面膜或胶束中表面活性剂排布越松散,即界面张力越大,体系中胶束聚集数较小。     

Aggregation behavior of long-chain N-aryl imidazolium bromide in aqueous solution

The aggregation behavior of three long-chain N-aryl imidazolium ionic liquids (ILs), 1-(2,4,6-trimethylphenyl)-3-alkylimidazolium bromide [C(n)pim]Br (n = 10, 12, and 14), in aqueous solutions was systematically explored by surface tension, electrical conductivity, and (1)H NMR. A lower critical micelle concentration (cmc) for the N-aryl imidazolium ILs is observed compared with that for 1,3-dialkylimidazolium ILs [C(n)mim]Br, indicating that the incorporation of the 2,4,6-trimethylphenyl group into a headgroup favors micellization. The enhanced π-π interactions among the adjacent 2,4,6-trimethylphenyl groups weaken the steric hindrance of headgroups and thus lead to a dense arrangement of [C(n)pim]Br molecules at the air-water interface. An analysis of the (1)H NMR spectra revealed that the introduced 2,4,6-trimethylphenyl group may slightly bend into the hydrophobic regions upon micellization. The micelle formation process for [C(n)pim]Br (n = 10, 12, and 14) was found to be enthalpy-driven in the investigated temperature range, which is attributed to the strong electrostatic self-repulsion of the headgroups and the counterions as well as the π-π interactions among headgroups. Strong, stable fluorescence properties are presented by the new N-aryl imidazolium ILs, indicating their potential application in the field of photochemistry.     

Surface tension of binary mixtures of imidazolium and ammonium based ionic liquids with alcohols, or water: cation, anion effect

The surface tensions were measured at atmospheric pressure, with use of a ring tensiometer, of a series of alcoholic solutions of closely related ionic liquids: 1-methyl-3-methylimidazolium methylsulfate, [MMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium methylsulfate, [BMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium octylsulfate, [BMIM][OcSO4] in alcohol (methanol, or 1-butanol at 298.15 K) and of 1-hexyloxymethyl-3-methylimidazolium tetrafluoroborate, [C6H(13)OCH2MIM][BF4], 1,3-dihexyloxymethylimidazolium tetrafluoroborate, [(C6H13OCH2)2IM][BF4] in alcohol (methanol, or 1-butanol, or 1-hexanol at 308.15 and 318.5 K) and hexyl(2-hydroxyethyl)dimethylammonium bromide, C6Br in 1-octanol at 298.15 K. The set of ammonium ionic liquids of different cations and anions (C2Br, C2BF4, C2PF6, C2N(CN)2, C3Br, C4Br and C6Br) was chosen to show the influence of small amount of the ammonium ionic liquid on the surface tension of water at 298.15 K. The influence of the cation, or anion alkyl chain length on the properties under study (densities and surface tension) was tested.