锂单离子导电固态聚合物电解质

锂单离子导电固态聚合物电解质是一类锂离子迁移数接近1的锂离子导体,可以有效避免阴离子移动产生浓差极化,从而提高锂电池的容量以及循环性能,成为近年来固态聚合物电解质的研究热点。本文综述了锂单离子导电固态聚合物电解质的研究进展,重点关注了电导率和锂离子迁移数较高的体系,并简要评述了锂单离子导电固态聚合物电解质所面临的挑战以及发展前景。     

Li-SGO掺杂半互穿网络型多孔单离子传导聚合物复合电解质的制备

本文成功制备了磺酸锂功能化石墨烯,通过原位聚合方式成功将其添加到单离子传导聚合物电解质中制备出磺酸锂功能化石墨烯改性半互穿网络型多孔单离子传导聚合物复合电解质.与未掺杂磺酸锂功能化石墨烯半互穿网络型多孔单离子传导聚合物电解质相比,该电解质具有更高的孔隙率、吸液率、机械拉伸强度和离子电导率.电化学测试结果表明,掺杂磺酸锂...     

单离子聚合物快离子导体

具有高锂离子迁移数和良好可加工性能的锂快离子导体对于全固态电池的发展非常重要。然而,现有的锂快离子导体主要限制于硬质陶瓷,目前尚无柔性聚合物类型的锂快离子导体被报道。在这个工作中,我们报告了一种通过三种不同有机单体的自由基聚合反应形成的三元无规共聚单离子快离子导体(SISC)。该SISC中包含丰富的锂离子传输位点和具有阴离子锚定功能的阴离子受体。此外,三种不同单体的共聚反应带来低结晶度和低玻璃化转变温度(T_g),有利于链段运动,从而获得小的锂离子传输的活化能(E_a)。电化学测试结果表明,该SISC的室温离子电导率和锂离子迁移数分别达到1.29 mS∙cm⁻¹和0.94。将SISC与锂金属负极和多种正极(包括LiFePO₄、LiCoO₂和硫化聚丙烯腈(SPAN))原位聚合,组装得到的全固态电池具有良好的电化学稳定性。其中,Li||LiFePO₄全固态电池表现出高达8C的倍率性能和良好的循环寿命(在0.5C倍率下稳定循环 > 700圈)。这项工作提供了一种新颖的聚合物基快离子导体设计理念,对于发展高性能全固态电池具有重要意义。     

聚苯醚磺酸锂与聚乙二醇共混体系的离子导电性

本文研究影响聚乙二醇（ＰＥＧ）增塑聚苯醚磺酸锂（ＳＰＰＯＬｉ）电导率的各种因素，如摩尔比，及ＰＥＧ分子量等。ＳＰＰＯＬｉ／ＰＥＧ具单离子导体的特征，试样最高室温电导可达１０＾－５Ｓ／ｃｍ。     

聚阴离子单离子导体凝胶电解质的制备及其在锂离子电池中的应用

以2-丙烯酰胺-2-甲基丙磺酸(AMPS)与Li₂CO₃反应制得AMPSLi单体,以(聚偏氟乙烯-六氟丙烯)共聚物(PVDF-HFP)为基膜条件进行原位聚合,加入乙二醇二甲醚(DME),1,3-二氧戊烷(DOL)作为增塑剂,制备了一种聚阴离子单离子导体凝胶电解质。采用电化学工作站进行电化学稳定窗口与迁移数表征。结果表明：单离子导体凝胶电解质具有2~4.5 V的宽电化学稳定窗口以及高达0.74的锂离子迁移数。采用磷酸铁锂（LFP）作正极,金属锂作负极,PVDF-HFP-PAMPSLi单离子导体作为电解质组装电池。在不加入锂盐时,电池在2C电流密度下具有125 mAh·g^-1的高比容量和超过500次的循环次数;在5 C的高电流密度下具有100 mAh·g^-1的比容量与超过300次的稳定循环能力,并保持接近100%的稳定库伦效率。      

低聚离子液体的体相与界面及其电化学储能应用

近年来,随着单阳离子液体的发展,新型低聚物离子液体被合成并应用。这类离子液体可看作是由几个重复的单阳离子组合而成,可以通过改变阳离子带电基团、间隔连接的长度或种类、末端链的长度以及阴离子种类来获得更多不同的结构。因此,低聚离子液体有更复杂的微观结构和内部相互作用,决定了其多特征的物化性质和电化学特性,有望满足更多对溶剂性能有特定要求的应用。例如,与单阳离子液体相比,低聚离子液体具有更大的可调节性、更宽的液态温度范围、更高的热稳定性等优点,使其在电化学储能设备中得到越来越多的应用,如用作超级电容器和锂离子电池的电解液。在本综述中,我们系统地总结并详细解释了低聚离子液体的性质和结构（包括单个离子的结构和本体液内部的纳米组织）之间的关联,主要是双阳离子液体和三阳离子液体;概括了低聚离子液体作为超级电容器和锂离子电池的电解液的相关研究,重点阐述了由低聚离子液体和不同类型电极组成的双电层的结构和性能,以及与相应单阳离子液体电解液的比较结果;提供了降低低聚离子液体粘度和加速离子扩散的优化措施,提出了低聚离子液体电解液未来可能面临的主要问题和发展前景。     

含烷氧磺酸锂盐及对称星形醚的聚环氧乙烷基聚合物电解质的制备及电化学性能

合成了低聚度烷氧磺酸锂盐（LiSA(EO)n)和对称星形醚（STEO）增塑剂,并制备了聚环氧乙烷（PEO）基聚合物电解质。 研究了PEO16+LiSA(EO)n体系的锂离子迁移数和电导率与锂盐结构的关系,实验结果表明,LiSA(EO)n代替LiClO4作为锂盐时,其电导率得到提高,而且聚合物电解质的锂离子迁移数随着烷氧磺酸锂盐阴离子体积的增大而增加,并且其中PEO16+LiSA(EO)2体系的锂离子迁移数达到0.35。 STEO可明显地提高PEO16-LiSAEO-STEO体系的电导率,PEO16-LiSAEO-20%STEO室温电导率可达到0.5×10-4 S/cm。 通过DSC实验结果表明,STEO的加入,可有效降低聚合物电解质体系的熔融温度和结晶度,PEO16-LiSAEO-20%STEO电化学稳定窗口在4.4 V以上,可满足锂电池的应用要求。     

新型单离子梳状聚合物电解质的合成和性能研究

通过苯乙烯,α-烯丙基聚醚和烯丙基磺酸锂共聚反应,制得一种以聚烯烃为主链、侧挂聚醚和烷基磺酸锂的新型单离子梳状聚合物电解质膜(CPPL)。通过IR,GPC及DSC等对其结构与形态进行了表征。结果表明:CPPL的Tg值主要取决于单体原料配比,室温电导率可达9.3×10-5S·cm-1,电化学窗口大于5.0V。     

聚氨酯—高氯酸锂固态离子导体的低频交流特性分析

测定了聚氨酯－高氯酸锂固态离子导体的交流阻抗谱。分析了离子导体的温度依赖性和低频介电特性。结果表明，聚氨酯－高氯酸锂固态离子导体具有较高的离子导电率，导电率的温度依赖性服从经验的ＶＴＦ方程，离子导体表现出非Ｄｅｂｙｅ型介电行为。     

马来酸酐—醋酸乙烯酯梳状聚合物单阳离子导体的制备及表征

马来酸酐－醋酸乙烯酯交替共聚物以聚乙二醇单醚醇解，得到带有不同长度的聚醚氧侧链的羧酸型梳状聚合物，其碱金属盐在加入适当增塑剂成膜后，可作为聚合物单阳离子导体，其结构以非晶态为主，具有较低的玻璃化转变温度及较好的热稳定性，增塑后的室温电导率最高可达１０－５Ｓ／ｃｍ．研究发现，适当增加侧链的长度有利于提高聚合物膜的离子电导率．此外，还详细探讨了增塑剂、阳离子半径、温度及外加频率等因素对电导率的影响．     

低聚醚磺酸锂／梳形聚醚复合物的单离子导电性

A complex ionic conductor was prepared by solution complexation of lithium methoxy oligo (oxyethylene) sulfonate (SOL₈, where & is the repeating unit of oxyethylene) with comblike copolyether poly [methoxy oligo (oxyethylene)methacrylate-co-acrylamide] [P(MEO₁₆-AM)]. The composition dependences of glass transition temperature,crystallinity as well as conducti-vity of the complex were investigated. DC polarization showed that the complex shows a stable polarization characteristic. Polarization reversing method confirmed that the complex has a cati-onic transference number of 0.99.     

SYNTHESIS AND CHARACTERIZATION OF POLYSILOXANE CONTAINING OLIGO(OXYETHYLENE)SULFATE SALT

Solvent-free polymeric alkali-metal ion conductors, consisting of a comb-like polysiloxane with oligo(oxy-ethylene) side chains and pendant sulfate groups were synthesized by the hydrosilylation of allyl oligo(oxyethylene) sulfatesalt and allyl methoxy oligo(oxyethylene) with poly(methylhydrosiloxane). The factors influncing the ionic conductivity ofthe resulting polymer such as the electrolyte content and the nature of the alkali-metal were investigated. The temperaturedependence of conductivity was determined, and the ionic conductivity of the polymer follows the Vogel-Tammann-Fulcher(VTF) equation.     

THERMAL BEHAVIOR AND IONIC CONDUCTIVITY OF POLY[LITHIUM-N(4-SULFO-PHENYL) MALEIMIDE -CO-METHOXY OLIGO(OXYETHYLENE) METHACRYLATE]

Poly[lithium-N(4-sulfophenyl) maleimide -co- methoxy oligo-(oxyethylene) methacrylates] [P(LiSMOE_n)s] with three different oligoether side chains and different salt concentrations were synthesized. The copolyelectrolytes are essentially random in structure, with blocks of methoxy oligo(oxyethylene) meth-acrylate (MOE_nM) recurring sporadically in between the salt units of N(4-sulfophenyl) maleimide. They all show two glass transitions in the temperature range of ?100 to 100°C. The first one below ?30°C is assigned to the oligo(oxyethylene) side chain (T _g1), while the second one located between 20 and 50°C is attributed to the main chain of the polymer host (T _g2). The maximum ionic conductivity of the copolymer electrolytes, 1.6 × 10^?7 S cm^?1 at 25°C, occurs at lithium salt concentration [Li⁺]/[EO] = 2.2 mol%. The ionic conductive behavior of the copolyelectrolytes follows the Vogel-Tammann-Fulcher (VTF) equation. Moreover, a special VTF behavior exists in the copolymers with shorter oligoether side chain and higher salt concentration. Sweep voltammetric results indicate that these copolyelectrolytes have a good electrochemical stability window.     

POLYMERIC IONIC CONDUCTORS MODIFIED WITH POLAR GROUPS:PART Ⅰ. IONIC CONDUCTION AND MECHANICAL PROPERTY OF LI-COMPLEX BASED ON ACRYLAM ID E-COPOLYMERIZED METHACRYLATES

Acrylamide was introduced onto the chain of poly[oligo(oxyethylene) methacrylate] as a polar constituent, and the effect of its presence on the mechanical strength and ionic conduction properties of Li-salt complex based on the resultant copolymer was investigated. The introduction of the polar constituent raises chain rigidity, retards crystallization of oligo(oxyethylene) domain and promotes the dissociation of lithium salt. The factors work on the mechanical and conduction properties synergistically, therefore both of the properties are improved simultaneously as the consequence of acrylamide-introduction.     

CATIONIC CONDUCTIVITY FOR THE CROSSLINKED P [OLIGO (OXYETHYLENE) METHACRYLATE-COoMETHACRYLOYL ALKYLSULFONIC ACID LITHIUM]

Crosslinked copolymers with single Li~+-ionic conductivity were prepared from oligo (oxyethylene) methacrylate (MEO_n), methacryloyl alkylsulfonic acid lithium (SAMLi), and oligo (oxyethylene) dimethacrylate (DMEO_n). Li~+-ionic conductivity of the copolymer is improved by crosslinking and presented as a function of polymerization degree (n) in MEO_n, comonomeric salt concentration (O/Li), and crosslinking degree. The crosslinked copolymer P (0.7 MEO_(14)-0.3DMEO_(14)-SHMLi) without other small molecular additives exhibits an optimum Li~+-ionic conductivity of 1.2×10~(-6) S/cm at 25℃. Dc polarization test in the cell composed of Li/copolymer/Li shows a constant dc ionic conductivity which closes gradually to the ac one with decreasing dc polarization potential.     

Synthesis and polymerization of oligo(oxyethylene) macromonomer bearing sodium sulfonate

Oligo(oxyethylene) macromonomers bearing sodium sulfonate group have been synthesized through four reactions: (1) ring-opening polymerization of oxirane, (2) etherification of monomethoxyl oligo(oxyethylene) and epichlorohydrin, (3) sulfonation of cycloxyl compound, and (4) end-capping of sodium oligo(oxyethylene) sulfonate by methacrylic group. A desired length of oligo(oxyethylene) in the macromonomers can easily be achieved by controlling the ratio of reactants in the ring-opening step. The structures of the products of each reaction were identified by IR, ¹H-NMR, and GPC. Polymers of the monomers were also characterized by GPC and DSC. © 1993 John Wiley & Sons, Inc.     

SYNTHESIS AND POLYMERIZATION OF OLIGO (OXYETHYLENE) MACROMONOMER

This paper reports the synthesis of methoxyoligo (oxyethylene) methacrylate (MEO_n , n is the repeating unit number of (CH_2CH_2O) in the macromonomer), and its polymerization in different solvents. MEO_n is prepared through such two independent reactions as (1) anionic polymerization of oxirane initiated by potassium alkoxide and (2) end-capping of methoxy oligo(oxyethylene) by methacrylic group. The n value can be conveniently controlled over the range of 5 ～30 by varying the molar ratio of oxirane to initiator and the molecular weight distribution of MEO_n be narrowed by increasing reaction time only in step (1). MEO_n thus obtained shows a rapid polymerization in water and benzene respectively, and both give water-soluble polymers as long as suitable conditions are used.     

Polymers designed to control nucleation and growth of inorganic crystals from aqueous media

Water soluble graft polymers prepared by copolymerization of either methacrylic acid (MAA) or vinylsulfonic acid (VS) with α‐methoxy‐ω‐methacroyl‐oligo(oxyethylene)s (PEO_n‐MA) serve to control nucleation and crystal growth during precipitation of inorganic crystals from aqueous media. Precipitation of zinc oxide crystals (‘zincite’) is used as example for such mineralization processes. Homogeneous and narrow crystal size distributions are obtained in presence of ppm‐amounts of graft copolymers. Copolymer is incorporated into the crystals demonstrated by using latex particles with ‐CO₂H‐group rich surfaces as controlling additives. Incorporation of these particles leads to single crystals with pores of the size of the particles (‘Swiss cheese’ morphologies).     

Synthesis and thermal crosslinking of carbosiloxane and oligo(oxyethylene) polymers

Acyclic diene metathesis (ADMET) polymerization has been used in the synthesis of telechelic materials using alkoxy‐functionalized carbosiloxane or oligo(oxyethylene)‐based polymers, varying from internal to terminal cured materials or the combination of them. Previous investigations demonstrated that introduction of chain‐end crosslinking improves the stress–strain behavior of such materials. A series of saturated and unsaturated carbosiloxane and oligo(oxyethylene)‐based polymers were synthesized by ADMET polymerization using silacyclobutane as chain‐end, thermally induced crosslinker. The carbosiloxane derivatives presented pure amorphous behavior, whereas the oligo(oxyethylene) polymers were semicrystalline. The thermal curing process was monitored by differential scanning calorimetry via the exotherm between 160 and 210 °C. Mechanical properties on thermoset polymers were measured, where cured polymers showed moduli from 0.6 to 9.3 MPa, tensile strengths from 0.3 to 1.0 MPa, and elongations from 12 to 76%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011