Controllable photopatterning and photochemical properties of novel copolymer containing dianthracene langmuir–blodgett films

A new series of copolymer poly(N‐hexadecylmeth acrylamide‐co‐bis(anthracen‐9‐ylmethyl) 2‐allylmalonate) [poly(HDMA‐co‐DAnMAMA)]s containing swallow‐tailed double anthracenyl groups and long alkyl group are designed and synthesized. The main route of the photochemical reaction of the p(HDMA‐DAnMAMA)copolymer Langmuir–Blodgett (LB) films is dimerization reaction between the anthracenyl groups under the irradiation of both 365 and 248 nm for limiting irradiation time, resulting to a fine negative‐tone pattern. On the other hand, the anthracenyl groups act just as photodecomposition group under 248 nm for longer irradiation time, resulting to a fine positive‐tone pattern. Consequently, positive‐tone and negative‐tone pattern are obtained by choosing not only a suitable irradiation light wavelength, but the irradiation time at 248 nm. Moreover, it is found that the exposed and unexposed regions of copolymer LB films irradiated at 248 nm have solubility differentiation in gold etchant (I₂/NH₄I/C₂H₅OH/H₂O), that is to say, the gold photopatterns with the maximal resolution of the used mask can be obtained easily without any development process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 139–147, 2012     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐ 4‐yl)methyl methacrylate‐co‐styrene] by addition reaction of carbon dioxide and its compatibility with poly(methyl methacrylate) or poly(vinyl chloride)

We investigated the chemical fixation of carbon dioxide (CO ₂) to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer to polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl)methyl methacrylate‐co‐styrene] [poly(DOMA‐co‐St)] from the addition of CO ₂ to poly(glycidyl methacrylate‐co‐styrene) [poly(GMA‐co‐St)], quaternary ammonium salts showed good catalytic activity at mild reaction conditions. The CO ₂ addition reaction followed pseudo first‐order kinetics with the concentration of poly(GMA‐co‐St). In order to expand the applications of the CO ₂ fixed copolymer, polymer blends of this copolymer with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) were cast from N,N′‐dimethylformamide (DMF) solution. Miscibility of blends of poly(DOMA‐co‐St) with PMMA or PVC have been investigated both by differential scanning calorimetry (DSC) and visual inspection of the blends, and the blends were miscible over the whole composition ranges. The miscibility behaviors were also discussed in terms of FT‐IR spectra. Copyright © 2002 John Wiley & Sons, Ltd.     

Surface arrangement of azobenzene moieties in two different azobenzene‐derived Langmiur–Blodgett films

An investigation of two different Langmuir–Blodgett (LB) films, [4‐(6‐oxo‐hexacarboxylic acid)‐3‐trifluoromethyl‐azobenzene] (FAzo5COOH) and copolymer poly{2‐hydroxyethylmethacrylate}₉‐co‐{6‐[3‐((trifluoromethyl)phenyl)azo] phenoxylhe‐Xylmeth‐acrylate}₁(PHEMA‐co‐PFAzoPHA) films, is reported. The different structural behavior of the two types of films was first analyzed in detail by UV–visible spectroscopy. The different wettability of the films under UV–visible irradiation was subsequently studied by the contact‐angle technique. A large change of the contact angle (CA) was observed on PHEMA‐co‐PFAzoPHA films compared to the FAzo5COOH films before and after UV irradiation. The films were finally characterized by atomic force microscopy (AFM), and the morphologies were observed under UV–visible irradiation. The results indicate that the molecules are densely packed in the FAzo5COOH films compared to the PHEMA‐co‐PFAzoPHA films. It is attributed to the strong interaction between neighboring azobenzene moieties in the FAzo5COOH LB films of the smaller molecules. Copyright © 2006 John Wiley & Sons, Ltd.     

Topological “interfacial” polymer chemistry: Dependency of polymer “shape” on surface morphology and stability of layer structures when heating organized molecular films of cyclic and linear block copolymers of n‐butyl acrylate‐ethylene oxide

The “topological polymer chemistry” of amphiphilic linear and cyclic block copolymers at an air/water interface was investigated. A cyclic copolymer and two linear copolymers (AB‐type diblock and ABA‐type triblock copolymers) synthesized from the same monomers were used in this study. Relatively stable monolayers of these three copolymers were observed to form at an air/water interface. Similar condensed‐phase temperature‐dependent behaviors were observed in surface pressure–area isotherms for these three monolayers. Molecular orientations at the air/water interface for the two linear block copolymers were similar to that of the cyclic block copolymer. Atomic force microscopic observations of transferred films for the three polymer types revealed the formation of monolayers with very similar morphologies at the mesoscopic scale at room temperature and constant compression speed. ABA‐type triblock linear copolymers adopted a fiber‐like surface morphology via two‐dimensional crystallization at low compression speeds. In contrast, the cyclic block copolymer formed a shapeless domain. Temperature‐controlled out‐of‐plane X‐ray diffraction (XRD) analysis of Langmuir–Blodgett (LB) films fabricated from both amphiphilic linear and cyclic block copolymers was performed to estimate the layer regularity at higher temperatures. Excellent heat‐resistant properties of organized molecular films created from the cyclic copolymer were confirmed. Both copolymer types showed clear diffraction peaks at room temperature, indicating the formation of highly ordered layer structures. However, the layer structures of the linear copolymers gradually disordered when heated. Conversely, the regularity of cyclic copolymer LB multilayers did not change with heating up to 50 °C. Higher‐order reflections (d₀₀₂, d₀₀₃) in the XRD patterns were also unchanged, indicative of a highly ordered structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 486–498     

Preparation and characterization of 5,10,15,20‐tetraphenylporphyrin Langmuir films for gas chemsensor applications

In this work is reported the preparation and characterization of 5,10,15,20‐tetraphenylporphyrin (H₂TPP) films at the water‐air interfaces. The surface pressure‐area isotherms (π‐A) and UV‐Vis spectroscopy were used to investigate the effect of the spreading methods and parameters on the porphyrin monolayer formation. Also, Langmuir‐Blodgett (LB) and Langmuir‐Schaefer (LS) films were deposited onto glass substrates in order to study the conformation changes in porphyrin molecular packing. Quartz crystal microbalance (QCM) was utilized as the active solid substrate for the development of the NO₂ gas sensor based on the H₂TPP molecular films. The results of π‐A curves have clearly shown the significant contribution of the preparation methods and processing parameters on the conformation of porphyrin molecular films. The UV‐Vis spectroscopy results using polarized absorption dichroism have indicated different molecular packing for porphyrin films deposited by LB and LS methods, with relative tilted angles of 50° ± 5° and 35° ± 5°, respectively. Moreover, the QCM response has given strong evidence that H₂TPP porphyrin molecular films have performed as NO₂ chemsensor. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation,characterization, and electrical properties of dual‐emissive Langmuir‐Blodgett films of some europium‐substituted polyoxometalates and a platinum polyyne polymer

A new series of organometallic/inorganic composite Langmuir‐Blodgett (LB) films consisting of a rigid‐rod polyplatinyne polymer coordinated with 2,7‐bis(buta‐1,3‐diynyl)‐9,9‐dihexylfluorene (denoted as PtP) as the π‐conjugated organometallic molecule, an europium‐substituted polyoxometalate (POM; POM = Na₉EuW₁₀O₃₆, K₁₃[Eu(SiW₁₁O₃₉)₂] and K₅[Eu(SiW₁₁O₃₉)(H₂O)₂]) as the inorganic component, and an amphiphilic behenic acid (BA) as the auxiliary film‐forming agent were prepared. Structural and photophysical characterization of these LB films were achieved by π–A isotherms, absorption and photoluminescence spectra, atomic force microscopy imaging, scanning tunneling microscopy, and low‐angle X‐ray diffraction. Our experimental results indicate that stable, well‐defined, and well‐organized Langmuir and LB films are formed in pure water and POM subphases, and the presence of Eu‐based POM in the subphase causes an area expansion. It is proposed that a lamellar layered structure exists for the PtP/BA/POM LB film in which the POM and PtP molecules can lay down with the interfacial planes. Luminescence spectra of the prepared hybrid LB films show that near‐white emission spectra can be obtained due to the dual‐emissive nature of the mixed PtP/POM blends. These Pt‐polyyne‐based LB films displayed interesting electric conductivity behavior. Among them, PtP/BA/POM 13‐layer films showed a good electrical response, with the tunneling current up to ±100 nA when the voltage was monitored between ?1 and 7 V. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 879–888, 2010     

Luminescent Amphiphilic 2,6‐Bis(1‐alkylpyrazol‐3‐yl)pyridyl Platinum(II) Complexes: Synthesis,Characterization, Electrochemical,Photophysical, and Langmuir–Blodgett Film Formation Studies

Two series of novel platinum(II) 2,6‐bis(1‐alkylpyrazol‐3‐yl)pyridyl (N5Cn) complexes, [Pt(N5Cn)Cl][X] ( 1 – 9 ) and [Pt(N5Cn)(C?CR)][X] ( 10 – 13 ) (X=trifluoromethanesulfonate (OTf) or PF₆; R=C₆H₅, C₆H₄‐p‐CF₃ and C₆H₄‐p‐N(C₆H₅)₂), with various chain lengths of the alkyl groups on the nitrogen atom of the pyrazolyl units have been successfully synthesized and characterized. Their electrochemical and photophysical properties have been studied. Some of their molecular structures have also been determined by X‐ray crystallography. Two amphiphilic platinum(II) 2,6‐bis(1‐tetradecylpyrazol‐3‐yl)pyridyl (N5C14) complexes, [Pt(N5C14)Cl]PF₆ ( 7 ) and [Pt(N5C14)(C?CC₆H₅)]PF₆ ( 13 ), were found to form stable and reproducible Langmuir–Blodgett (LB) films at the air–water interface. The characterization of such LB films has been investigated by the study of their surface pressure–area (π–A) isotherms, UV/Vis spectroscopy, XRD, X‐ray photoelectron spectroscopy (XPS), FTIR, and polarized IR spectroscopy. The luminescence property of 13 in LB films has also been studied.     

Fluorescence emission of amphiphilic copolymers bearing benzimidazole groups: Stimuli‐responsive behaviors in aqueous solution

A stimuli‐responsive amphiphilic copolymer poly(NIPAM_m‐b‐VBNBI_n), including N‐isopropylacrylamide (NIPAM) as a thermoresponsive unit and 1‐(4‐vinyl benzyl)‐2‐naphthyl‐benzimidazole (VBNBI) as a sensitive fluorophore unit, was designed and synthesized by reversible addition‐fragmentation chain transfer polymerization. The aqueous solutions of the copolymers exhibited reversible fluorescent response to pH and temperature. In addition, the copolymers showed aggregation‐induced fluorescence enhancement in THF/water mixture. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4459–4466     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Precision synthesis of graft copolymers via living cationic polymerization of p‐acetoxystyrene followed by friedel–crafts‐type termination reaction

This study describes a novel precision synthesis strategy for graft copolymers using Friedel–Crafts‐type termination reaction between a cationically prepared poly(styrene derivative) and the naphthyl side groups from a poly(vinyl ether) main chain. The pendant alkoxynaphthyl groups on the poly(vinyl ether) efficiently terminated the living cationic polymerization of p‐acetoxystyrene (AcOSt) with SnCl₄ in the presence of ethyl acetate as an added base. This research provides the first example of a well‐defined graft copolymer prepared using this method. The resulting polymer contained 40 poly‐(AcOSt) branches, as calculated from the M_w determined via gel permeation chromatography–MALS analysis, which was in good agreement with the estimated number of branches obtained from ¹H NMR analysis. The acetoxy groups in the grafted poly(AcOSt) chains were easily converted into phenolic hydroxy groups under basic conditions. The as‐obtained graft copolymer with poly(p‐hydroxystyrene) side chains exhibited a pH‐sensitive phase separation in water. The synthetic method for preparing the graft copolymers was also effective in the living cationic polymerizations of other styrene derivatives. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4675–4683     

A new thermo‐responsive block copolymer with tunable upper critical solution temperature and lower critical solution temperature in the alcohol/water mixture

The multi‐thermo‐responsive block copolymer of poly[2‐(2‐methoxyethoxy)ethyl methacrylate]‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PMEO₂MA‐b‐PVEA) displaying phase transition at both the lower critical solution temperature (LCST) and the upper critical solution temperature (UCST) in the alcohol/water mixture is synthesized by reversible addition‐fragmentation chain transfer polymerization. The poly[2‐(2‐methoxyethoxy)ethyl methacrylate] (PMEO₂MA) block exhibits the UCST phase transition in alcohol and the LCST phase transition in water, while the poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PVEA) block shows the UCST phase transition in isopropanol and the LCST phase transition in the alcohol/water mixture. Both the polymer molecular weight and the co‐solvent/nonsolvent exert great influence on the LCST or UCST of the block copolymer. By adjusting the solvent character including the water content and the temperature, the block copolymer undergoes multiphase transition at LCST or UCST, and various block copolymer morphologies including inverted micelles, core‐corona micelles, and corona‐collapsed micelles are prepared. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4399–4412     

Chemical synthesis and electric properties of the conducting copolymer of aniline and o‐aminophenol

A copolymer, poly(aniline‐co‐o‐aminophenol), was prepared chemically by using ammonium peroxydisulfate as an oxidant. The monomer concentration ratio of o‐aminophenol to aniline strongly influences the copolymerization rate and properties of the copolymer. The optimum composition of a mixture for the chemical copolymerization consisted of 0.3 M aniline, 0.021 M o‐aminophenol, 0.42 M ammonium peroxydisulfate, and 2 M H₂SO₄. The result of cyclic voltammograms in a potential region of ?0.20 to 0.80 V (vs.SCE) indicates that the electrochemical activity of the copolymer prepared under the optimum condition is similar to that of polyaniline in more acid solutions. However, the copolymer still holds the good electrochemical activity until pH 11.0. Therefore, the pH dependence of the electrochemical property of the copolymer is improved, compared with poly(aniline‐co‐o‐aminophenol) prepared electrochemically, and is much better than that of polyaniline. The spectra of IR and ¹H NMR confirm that o‐aminophenol units are included in the copolymer chain, which play a key role in extending the usable pH region of the copolymer. The visible spectra of the copolymers show that a high concentration ratio of o‐aminophenol to aniline in a mixture inhibits the chain growth. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5573–5582, 2007     

Block copolymer mediated synthesis of amphiphilic gold nanoparticles in water and an aqueous tetrahydrofuran medium: An approach for the preparation of polymer–gold nanocomposites

The synthesis of polymer‐matrix‐compatible amphiphilic gold (Au) nanoparticles with well‐defined triblock polymer poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] and diblock polymers poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], polystyrene‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], and poly(t‐butyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] in water and in aqueous tetrahydrofuran (tetrahydrofuran/H₂O = 20:1 v/v) at room temperature is reported. All these amphiphilic block copolymers were synthesized with atom transfer radical polymerization. The variations of the position of the plasmon resonance band and the core diameter of such block copolymer functionalized Au particles with the variation of the surface functionality, solvent, and molecular weight of the hydrophobic and hydrophilic parts of the block copolymers were systematically studied. Different types of polymer–Au nanocomposite films [poly(methyl methacrylate)–Au, poly(t‐butyl methacrylate)–Au, polystyrene–Au, poly(vinyl alcohol)–Au, and poly(vinyl pyrrolidone)–Au] were prepared through the blending of appropriate functionalized Au nanoparticles with the respective polymer matrices {e.g., blending poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate‐stabilized Au with the poly(methyl methacrylate)matrix only}. The compatibility of specific block copolymer modified Au nanoparticles with a specific homopolymer matrix was determined by a combination of ultraviolet–visible spectroscopy, transmission electron microscopy, and differential scanning calorimetry analyses. The facile formation of polymer–Au nanocomposites with a specific block copolymer stabilized Au particle was attributed to the good compatibility of block copolymer coated Au particles with a specific polymer matrix. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1841–1854, 2006     

Structural Control of Hierarchically‐Ordered TiO2 Films by Water for Dye‐Sensitized Solar Cells

A facile way of controlling the structure of TiO₂ by changing the amount of water to improve the efficiency of dye‐sensitized solar cells (DSSCs) is reported. Hierarchically ordered TiO₂ films with high porosity and good interconnectivity are synthesized in a well‐defined morphological confinement arising from a one‐step self‐assembly of preformed TiO₂ (pre‐TiO₂) nanocrystals and a graft copolymer, namely poly(vinyl chloride)‐g‐poly(oxyethylene methacrylate). The polymer–solvent interactions in solution, which are tuned by the amount of water, are shown to be a decisive factor in determining TiO₂ morphology and device performance. Systematic control of wall and pore size is achieved and enables the bifunctionality of excellent light scattering properties and easy electron transport through the film. These properties are characterized by reflectance spectroscopy, incident photon‐to‐electron conversion efficiency, and electrochemical impedance spectroscopy analyses. The TiO₂ photoanode that is prepared with a higher water ratio, [pre‐TiO₂]:[H₂O]=1:0.3, shows a larger surface area, greater light scattering, and better electron transport, which result in a high efficiency (7.7 %) DSSC with a solid polymerized ionic liquid. This efficiency is much greater than that of commercially available TiO₂ paste (4.0 %).     

(R)‐(+)‐2,2′‐Bis­(di­phenyl­phosphinoyl)‐1,1′‐bi­naphthyl

The title compound, BINAP oxide, C₄₄H₃₂O₂P₂, (I), was synthesized by direct oxidation of (R)‐(+)‐2,2′‐bis­(di­phenyl­phosphino)‐1,1′‐bi­naphthyl (BINAP) with tert‐butyl hydro­peroxide in toluene solution. The angle between the naphthyl planes of the bi­naphthyl group is 94.17 (3)°.     

Aggregation Behavior of Homo‐PS/PS‐b‐P2VP Blends at the Air/Water Interface

The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.

     

Interfacial Self‐Assembly of Closely Packed Nanoparticle Arrays of Silica@Multiporphyrin Hybrids as Light‐Sensitizers for Dye Degradation and Viologen Photochromism

Light‐sensitizer functionalized organic–inorganic hybrid materials have attracted much attention owing to their potential applications in the fields of optoelectronics, heterogeneous catalysis, sensors, and nanotechnology. Here, an interfacial self‐assembly of zero‐dimensional (0D) silica@multiporphyrin array nanohybrids and their 3D Langmuir–Blodgett (LB) films is reported. Photoactive tetrapyridylporphyrin (TPyP) was first assembled on the silica nanoparticles’ surfaces via silane, substitution, and coordination reactions to produce nanoSiO₂@(Pd‐TPyP)_n hybrids. Then, the Cd²⁺‐nanoSiO₂@(Pd‐TPyP)_n monolayers and LB films were constructed on the CdCl₂ subphase surface. These monolayers and LB films displayed stronger stability, as well as more uniform and closely packed nanoparticle arrays compared with those prepared on the pure water surface, owing to the formation of strong network‐like Pd‐ and Cd‐TPyP coordination units, which significantly enhanced the nanoparticles’ interaction. Further, compared with that of the 0D nanoSiO₂@(Pd‐TPyP)_n hybrids, the degradation efficiency was nearly 20 times higher when the hybrids’ LB films were used as light‐sensitizers for the photocatalytic degradation of RhB. Finally, flexible photochromic devices were constructed by using the LB films sandwiched between two electrodes, which displayed a reversible photoinduced redox reaction of viologen together with a color change process. Because TPyP was strongly immobilized on the nanoparticles’ surfaces and the particles were connected through the Py‐Pd²⁺‐Py and Py‐Cd²⁺‐Py coordination units with the 3D network‐like architecture, the present nanohybrids and LB films had good stability and reusability.     

Synthesis,characterization and release profiles of nanoparticles self‐assembled from poly (PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers

A novel amphiphilic copolymer was synthesized from poly (ethylene glycol) methyl ether methacrylate (PEGMA950), methyl methacrylate (MMA) and acryloyl‐β‐cyclodextrin (acryloyl‐β‐CD) using the composites of (NH₄)₂S₂O₈/NaHSO₃ as the oxidation–reduction initiators. The successful fabrication of poly(PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers was confirmed by Fourier transform infrared spectrometer (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR) spectra. The amphiphilic copolymer could self‐assemble into nanoparticles (NPs), and their morphology and particle size distribution were characterized with transmission electron microscopy (TEM), atomic force microscope (AFM) and dynamic light scattering (DLS) methods. Ibuprofen (IBU) was encapsulated in the novel NPs, and the release profiles of IBU were investigated. FTIR and ¹H NMR spectra illustrated that the poly(PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers were synthesized without any residual monomers and initiators. TEM and AFM photographs suggested that the obtained NPs were spherical, and the DLS results indicated that the diameter of blank NPs was 157.3 ± 32.7 nm. The IBU release profile showed that the IBU‐loaded NPs had certain pH responsibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Polyplatinayne/polyoxometalate composite Langmuir‐Blodgett films: Preparation,structural characterization,and potential optoelectronic applications

A new family of organometallic/inorganic composite Langmuir‐Blodgett (LB) films consisting of rigid‐rod polyplatinayne polymer ([Pt‐T(OMe‐Fl)T]_∞ or [Pt‐T(F‐Fl)T]_∞, where the triplet bonds are abbreviated by T, and fluorene ring by Fl) as the π‐conjugated organometallic molecule, polyoxometalate (POM, POM = K₃PMo₁₂O₄₀, H₃PW₁₂O₄₀, or H₆P₂W₁₈O₆₂) of the Keggin and Dawson structures as the inorganic component, and dimethyldioctadecylammonium bromide (DODA) or a mixture of octadecanoic acid (OA) and docosanoic acid (DA) as the auxiliary film‐forming agent were prepared and characterized by π–A isotherms, UV–Vis absorption spectra, photoluminescence spectra, atomic force microscopy imaging, scanning tunneling microscopy, and low‐angle X‐ray diffraction. Our experimental results indicate that steady, even, and ordered Langmuir and LB films are formed in pure water and polyoxometalate subphases. It was shown that the POM molecules are probably embedded inside the polyplatinayne molecules in the LB film structure and they can quench the luminescence of the Pt polyyne. These Pt‐polyyne based LB films display interesting electric conductivity behavior. [Pt‐T(OMe‐Fl)T]_∞/DODA/HPW₁₂ monolayer film shows a good electrical conductivity, and the tunneling current amounts to ±100 nA when the voltage is set at ±8 V. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3193–3206, 2008     

Novel anhydrous proton conducting copolymers of 1‐vinyl‐1,2,4‐triazole and diisopropyl‐p‐vinylbenzyl phosphonate

Phosphonic acid functional polymers are currently of interest because of their high proton conductivity in humidified and anhydrous systems. In addition, heterocyclic compounds are used in anhydrous proton conducting polymer membranes. In that study, a new copolymer based on 1‐vinyl‐1,2,4‐triazole (VTri) and diisopropyl‐p‐vinylbenzyl phosphonate (VBP) was synthesized, and their thermal, chemical, and proton conducting properties were investigated. The copolymers were synthesized by free radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain P(VTri‐co‐VBP) copolymers. The copolymer samples were then hydrolyzed to produce poly(vinyl triazole‐co‐vinyl phosphonic acid) copolymers. The composition of the copolymers was determined by elemental analysis. The copolymerization and hydrolysis reactions were verified by Fourier transform infrared spectroscopy and ion exchange capacity measurements. Thermogravimetry analysis indicates that the copolymers are thermally stable up to 300°C. In order to increase the proton conductivity, the copolymers were doped with H₃PO₄ at several stoichometric ratios. The proton conductivity increases with triazole and phosphoric acid content. In the absence of humidity, the copolymer electrolyte, P(VTri‐co‐VBPA)1:0.5 X = 2, showed a proton conductivity of 0.005 S/cm at 150°C. Copyright © 2013 John Wiley & Sons, Ltd.