Poly(acrylic acid)‐Modified Fe3O4 Microspheres for Magnetic‐Targeted and pH‐Triggered Anticancer Drug Delivery

Monodisperse poly(acrylic acid)‐modified Fe₃O₄ (PAA@Fe₃O₄) hybrid microspheres with dual responses (magnetic field and pH) were successfully fabricated. The PAA polymer was encapsulated into the inner cavity of Fe₃O₄ hollow spheres by a vacuum‐casting route and photo‐initiated polymerization. TEM images show that the samples consist of monodisperse porous spheres with a diameter around 200 nm. The Fe₃O₄ spheres, after modification with the PAA polymer, still possess enough space to hold guest molecules. We selected doxorubicin (DOX) as a model drug to investigate the drug loading and release behavior of as‐prepared composites. The release of DOX molecules was strongly dependent on the pH value due to the unique property of PAA. The HeLa cell‐uptake process of DOX‐loaded PAA@Fe₃O₄ was observed by confocal laser scanning microscopy (CLSM). After being incubated with HeLa cells under magnet magnetically guided conditions, the cytotoxtic effects of DOX‐loaded PAA@Fe₃O₄ increased. These results indicate that pH‐responsive magnetic PAA@Fe₃O₄ spheres have the potential to be used as anticancer drug carriers.     

Production of Poly(acrylic acid) Particles Dispersed in Organic Media

Summary: A process for preparation of poly(acrylic acid) particles dispersed in oil is presented. The process comprises two steps: the first step involves the preparation of a poly(acrylic acid) solution, while the second step consists in the preparation of the polymer particles by dispersing the polymer solution in an organic phase. During the second step, modification of the polymer chain structure can be performed through chemical reactions. One of the advantages of the proposed process is the possibility to produce particles loaded with drugs or other chemical compounds. Besides that, if the continuous phase is vegetable oil, purification of the reaction medium may not be necessary.     

聚丙烯酸功能化多壁碳纳米管

Covalent functionalization of multiwalled carbon nanotubes （MWNT） with poly（acrylic acid） has been successfully achieved via grafting of poly（acryloyl chloride） on nanotube surface by esterification reaction of acyl chloride-bound polymer with hydroxyl functional groups present on acid-oxidized MWNT and hydrolysis of polymer attached to nanotubes. Polymer-functionalized MWNT could possess remarkably high solubility in water, and their aqueous solution was very stable without any observable black deposit for a long time. Characterizations of such functionalized MWNT samples using Fourier transform infrared spectrometer, transmission electron microscopy and nuclear magnetic resonance techniques indicated that poly（acrylic acid） was covalently attached to the surface of MWNT.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Polymer-Based Superhydrophobic Coating Fabricated from Polyelectrolyte Multilayers of Poly(allylamine hydrochloride) and Poly(acrylic acid)

Superhydrophobic films mainly based on poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) polyelectrolyte multilayer have been deposited onto cleaned glass substrate by a layer-by-layer dip coating method. 3 bilayers of the PAH and PAA was directly coated onto the substrate as an underlying layer for subsequent coating. Desired surface roughness on the polyelectrolyte bilayers was created by etching the bilayers in hydrochloric acid solution so as to create the open pore having suitable size at the surface. Then, nanoparticles such as SiO₂ and TiO₂ of various sizes were deposited onto the etched polyelectrolyte bilayers. Finally, the surfaces were further modified with semifluorinated silane followed by cross-linking at 180 °C for 2 h to obtain desirable surface morphological features. The effect of etching time and addition of nanoparticles on surface morphology was investigated using an atomic force microscope (AFM). Wetting ability of the prepared film was determined by measuring water droplet contact angle using a goniometer. Adhesion between the superhydrophobic films and the substrate was evaluated by using a standard tape test method (D3359). The adhesion was improved by reducing the organic content in the films.     

Preparation and Characterization of pH-sensitive Hydrogel Film of Chitosan/Poly(acrylic acid) Copolymer

A hydrogel film of chitosan/poly(acrylic acid) (CS/PAAc) copolymer with the property of pH sensitivity, was prepared by irradiating the chitosan film, which was then swelled by aqueous AAc solutions of different concentrations. The effects of the feed ratio of chitosan and AAc on the properties of the hydrogels, such as swelling ratio and pH-sensitivity, were determined. Fourier transform infrared (FT-IR) spectroscopy was applied in the attenuated total reflectance (ATR) mode for analyzing the structure change of the hydrogels after the treatment in buffer solutions of different pHs.     

Amphiphilic conetworks. IV. Poly(methacrylic acid)‐l‐polyisobutylene and poly(acrylic acid)‐l‐polyisobutylene based hydrogels prepared by two‐step polymer procedure. New pH responsive conetworks

This article describes the synthesis and characterization of new amphiphilic polymer conetworks containing hydrophilic poly(methacrylic acid) (PMAA) or poly(acrylic acid) (PAA) and hydrophobic polyisobutylene (PIB) chains. These conetworks were prepared by a two‐step polymer synthesis. In the first step, a cationic copolymer of isobutylene (IB) and 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate (IDI) was prepared. The isocyanate groups of the IB–IDI random copolymer were subsequently transformed in situ to methacrylate (MA) groups in reaction with 2‐hydroxyethyl methacrylate (HEMA). In the second step, the resulting MA‐multifunctional PIB‐based crosslinker, PIB(MA)_n, with an average functionality of approximately four methacrylic groups per chain, was copolymerized with methacrylic acid (MAA) or acrylic acid (AA) by radical mechanism in tetrahydrofuran giving rise to amphiphilic conetworks containing 31–79 mol % of MAA or 26–36 mol % of AA. The synthesized conetworks were characterized with solid‐state ¹³C‐NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proven by swelling in both aqueous media with low and high pH and n‐heptane. The effect of varying pH on the swelling behavior of the synthesized conetworks is presented. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1284–1291, 2009     

pH- and Ionic-Strength-Induced Structural Changes in Poly(acrylic acid)-Lipid-Based Self-Assembled Materials

Summary: The effect of a polyanion introduced as a lipid conjugate (poly(acrylic acid)- dimyristoyl-sn-glycero-3-phosphoethanolamine, PAA-DMPE) on the structure of a self-assembled, biomembrane mimetic has been evaluated using synchrotron small-angle X-ray scattering (SAXS). At high grafting density (8–11 mol.%), the PAA chains were found to produce significant changes in structure in response to changes in pH and electrolyte composition. At low pH and in the absence of salt (NaCl), the neutral PAA chains adopt a coil conformational state that leads to the formation of a swollen lamellar structure. Upon the addition of salt at low to intermediate pH values, two lamellar phases, a collapsed and an expanded structure, coexist. Finally, when the polymer is fully ionized (at high pH), the extended conformation of the polymer generates a cubic phase. The results of this study contribute to an understanding of how polyelectrolytes may ultimately be harnessed for the preparation of self-assembling materials responsive to external stimuli.     

Effect of pH on Poly(acrylic acid) Solution Polymerization

The free-radical redox-initiated aqueous solution polymerization of fully and partially neutralized acrylic acid was carried out at room temperature under full exposure to air. The effect of neutralization degree on the polymerization rate and product properties was studied. Increasing neutralization of the reaction mixture with sodium hydroxide resulted in greater conversion of acrylic acid to sodium acrylate. The rate of polymerization, determined from a gravimetric off-line water removal technique, was shown to decrease significantly with decreasing degree of neutralization. Molecular weight also decreased with decreasing degree of neutralization. The glass transition temperature and hydrophilicity of the polymer product decreased with increasing degree of neutralization. In-line infrared monitoring was also used to monitor the reaction progress and was shown to be an effective tool for this purpose.     

Stereoselective Interaction between Isotactic and Optically Active Poly(lactic acid) and Phenyl‐Substituted Poly(lactic acid)

Isotactic and optically active poly(D ‐lactic acid) (PDLA) and phenyl‐substituted poly(lactic acid)s (Ph‐PLAs), i.e., poly(D ‐phenyllactic acid) (Ph‐PDLA) and poly(L ‐phenyllactic acid) (Ph‐PLLA), were synthesized and stereospecific interactions between the synthesized polymers were investigated by their thermal properties and crystallization behavior using differential scanning calorimetry (DSC). The DSC measurements indicated that PDLA is miscible with Ph‐PLAs and that the attractive interaction between PDLA and L ‐configured Ph‐PLA is higher than that between PDLA and D ‐configured Ph‐PDLA. In other words, the latter result means that poly(lactic acid) (PLA) has a higher stereoselective attractive interaction with Ph‐PLA with the reverse configuration than with Ph‐PLA of the same configuration. These results strongly suggest that PLA‐based materials with a wide variety of physical properties and biodegradability can be fabricated by blending them with substituted PLAs with the reverse and same configurations.

     

Paclitaxel‐Loaded β‐Cyclodextrin‐Modified Poly(Acrylic Acid) Nanoparticles through Multivalent Inclusion for Anticancer Therapy

A nanoassembled drug delivery system for anticancer treatment, formed by the host–guest interactions between paclitaxel (PTX) and β‐cyclodextrin (β‐CD) modified poly(acrylic acid) (PCDAA), is successfully prepared. After such design, the aqueous solubility of PTX is greatly increased from 0.34 to 36.02 μg mL^?1, and the obtained PCDAA‐PTX nanoparticles (PCDAA‐PTX NPs) exhibit a sustained PTX release behavior in vitro. In vitro cytotoxicity finds that PCDAA‐PTX NPs can accumulate significantly in tumor cells and remain the pharmacological activity of PTX. The in vivo real‐time biodistribution of PCDAA‐PTX NPs is investigated using near‐infrared fluorescence imaging, indicating that the PCDAA‐PTX NPs can effectively target to the tumor site by the enhanced permeability and retention effect in H22 tumor‐bearing mice. Through in vivo antitumor examination, PCDAA‐PTX NPs exhibit superior efficacy in impeding the tumor growth compared to the commercially available Taxol®.

     

Synthesis and characterization of poly (acrylonitrile‐co‐acrylic acid) as precursor of carbon nanofibers

Synthesis of a co‐polymer of polyacrylonitrile (PAN) producing a carbon nanofiber out of PAN and co‐polymer of PAN and comparison between these products were examined. Free‐radical solution copolymerization of acrylonitrile (AN) with acrylic acid (AA) was studied. In this perspective, AA, and AN were used as a precursor for polymerization reactions; then copolymers were synthesized by using ammonium persulfate (APS) as an oxidant and carried in water/dimethylformamide (DMF) mixture. These polymers were used to obtain corresponding electrospun nanofibers. Synthesized P(AN‐co‐AA) was investigated by Fourier transform infrared spectroscopy‐attenuated total reflection (FTIR‐ATR) spectroscopy, and characteristic peaks for AN unit, AA were achieved. Thermal behavior was examined by using differential scanning calorimeter (DSC) and thermal gravimetric analyzer (TGA), and results indicated that addition of monomers to AN unit reduced the Tg value of homopolymer PAN compared to P(AN‐co‐AA), which provides improvement to the cyclization and the formation of a thermally stable aromatic ladder polymer chain formation. In order to prevent the shrinkage and maintain the molecular orientation on nanofiber webs during stabilization, tension was applied to the samples, and thermal oxidation varies at 200–300°C for different duration of times. Surface morphology of the fibers was observed with scanning electron microscope (SEM), and average nanofiber diameter was found 550 nm, and after carbonization it was reduced to 320 nm for homopolymer PAN, and for poly(AN‐co‐AA) average nanofiber diameter was found as 220 nm and reduced to 130 nm, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

Study on Synergistic Effect Between Wormlike Micelles and Hydrophobically Modified Poly(acrylic acid) in Salt Solution

The complex system of hydrophobically modified poly (acrylic acid) (HMPA) and wormlike micelles formed by sodium oleate in the presence of sodium acetate is investigated by apparent viscosity and rheological measurements. Addition of small amount of HMPA markedly enhances the viscosity of wormlike micelles, with further increase of HMPA concentration, a viscosity drop is observed. At high salinity, the complex system still remains strong viscoelastic and eliminates the limitation of susceptibility to salt for HMPA. DPD simulation results are in good agreement with experimental data, which provide theoretical confirmation for a synergistic mechanism between HMPA and wormlike micelles.      

Hydrophilic Films Based on Blends of Poly(acrylic acid) and Poly(2‐hydroxyethyl vinyl ether): Thermal,Mechanical, and Morphological Characterization

Hydrophilic films based on blends of poly(acrylic acid) and poly(2‐hydroxyethyl vinyl ether) were prepared by casting. The characterization of the films was performed by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and scanning electron microscopy (SEM). It was shown that an increase of poly(2‐hydroxyethyl vinyl ether) content in the blends considerably decreases the glass transition temperature of the samples. The films containing 10 and 20 mol‐% of poly(2‐hydroxyethyl vinyl ether) show behavior of polymers in the glassy state, but a further increase of nonionic polymer content in the blend (30–50 mol‐%) provides the mechanical properties typical of a rubbery state. The content of water traces in the films has a significant effect on the mechanical properties of the materials.

Normalized DSC thermograms of PAA:PHEVE films. [PAA]:[PHEVE] = 90:10 (1), 80:20 (2), 70:30 (3), 60:40 (4), 50:50 mol‐% (5).     

Preparation and Characterization of Interpenetrating Polymer Hydrogels Based on Poly(acrylic acid) and Poly(vinyl alcohol)

Interpenetrating polymer hydrogels (IPHs) of Poly (vinyl alcohol) (PVA) and Poly (acrylic acid) (PAAc) have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N, N′-methylenebisacrylamide in the presence of PVA. The application of freezing-thawing cycles (F-T cycles) leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and the viscoelastic properties of the prepared IPHs were evaluated on the basis of the structural features obtained from solid state ¹³C-NMR spectroscopy.     

Poly(vinyl phosphonic acid): Hydrodynamic Properties and SEC‐Calibration in Aqueous Solution

Poly(vinyl phosphonic acid) (PVPA) as obtained by free radical polymerization of aqueous vinyl phosphonic acid was studied by light scattering (SLS, DLS) and size exclusion chromatography (SEC) in dilute aqueous solutions containing sufficient salt in order to screen long range electrostatic interactions. Samples of 37< < 110 × 10³ were studied. The polymers showed positive A₂‐values in aqueous NaH₂PO₄ solution (0.04 M ), and self‐diffusion behavior and R_H/R_G—ratios indicative of the structure of random coiled chains. A comparison of the SEC‐elugrams of the PVPA‐samples with those of commercially available standards of poly(acrylic acid) sodium salt gave a fit to the same calibration curve described by log P_n(PVPA) = −0.21ν_e + 7.0(+0.1) which correlates the number average degree of polymerization (P_n) with the elution volume ν_e. This indicates that PVPA and PAA have the same hydrodynamic structure under given solution conditions.