Microstructure and viscoelasticity of electrorheological suspensions with hybrid core‐shell microspheres

A novel type of electrorheological (ER) fluids with hybrid microspheres as dispersed phases was prepared and their rheological properties in dynamic and oscillatory modes in the presence of electric field were studied. Hybrid microspheres are new types of inorganic‐organic composites consisting of inorganic hollow cores covered with a thin layer of conjugated polymer poly (3‐octylthiophene)—P₃OT, followed by a polyurethane electrolyte shell of defined thicknesses and controlled (electronic and ionic) conductivities. It has been found that the rate of ER response for the applied electric field of the order of few kV/mm, as well as the recovery time after high shear loads of the novel ER fluids, was significantly improved in comparison to the typical solid electrolyte‐based materials. It has been shown that upon the application of an electric field the suspensions of hybrid microspheres form a gel‐like network structure at low strain region with reasonable rigidity characterized by the domination of G′ moduli over G″ and broad linear viscoelastic range. It was shown that at electric fields as high as 3 kV/mm, the investigated ER materials exhibited predominantly elastic behavior and were able to endure strains up to 3% without significant deformation of the material microstructure. Moreover, the novel ER materials exhibited much faster microstructure recovery after high shear loads in comparison to ER fluids comprising core‐shell composites without poly (3‐octylthiophene) interlayer, which makes them more suitable for the applications requiring immediate response to an external electric field.     

One‐stage synthesis of narrowly dispersed polymeric core‐shell microspheres

A method of one‐stage soap‐free emulsion polymerization to synthesize narrowly dispersed core‐shell microspheres is proposed. Following this method, core‐shell microspheres of poly(styrene‐co‐4‐vinylpyridine), poly(styrene‐co‐methyl acrylic acid), and poly[styrene‐co‐2‐(acetoacetoxy)ethyl methacrylate‐co‐methyl acrylic acid] are synthesized by one‐stage soap‐free emulsion polymerization of a mixture of one or two hydrophobic monomers and a suitable hydrophilic monomer in water. The effect of the molar ratio of the hydrophobic monomer to the hydrophilic one on the size, the core thickness, and the shell thickness of the core‐shell microspheres is discussed. The molar ratio of the hydrophobic and hydrophilic monomers and the hydrophilicity of the resultant oligomers of the hydrophilic monomer are optimized to synthesize narrowly dispersed core‐shell microspheres. A possible mechanism of one‐stage soap‐free emulsion polymerization to synthesize core‐shell microspheres is suggested and coagglutination of the oligomers of the hydrophilic monomers on the hydrophobic core is considered to be the key to form core‐shell microspheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1192–1202, 2008     

One‐pot synthesis of composite microspheres with core‐shell structure

One‐pot synthesis of thermoresponsive magnetic composite microspheres with a poly(N‐isopropylacrylamide) (PNIPAM) shell and a Fe₃O₄ core is demonstrated. Temperature sensitivity of PNIPAM was adopted to design the novel synthesis pathway. The as‐prepared composite microspheres have an obvious core‐shell structure with a mean size of approximately 250 nm. The Fe₃O₄ core is approximately 5 nm and the thickness of the PNIPAM shell is approximately 10 nm. The content of Fe₃O₄ in the composite microspheres can be controlled by this method. The composite microspheres experience a swelling and shrinking process in water by adjusting the temperature below and above the lower critical solution temperature (LCST) around 32 °C. These microspheres also show fine response to an external magnetic field. This work presents a platform to synthesize organic/inorganic composite microspheres in a facile and efficient approach. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2702–2708     

Supermicron polymer particles with core‐shell type morphologies

Polymer particles with controlled morphologies and having diameters from about 1–20 μ can be prepared using a new suspension polymerization‐based procedure. In contrast to existing procedures using emulsion polymerization, this process allows efficient preparation of supermicron particles that can be easily isolated as a dry powder. Control of the particle morphology is obtained by manipulating the monomer conversion at the beginning of the second stage of the reaction (when the second monomer is added). Two systems are studied. The first system uses styrene added to a partially polymerized MMA host particle, whereas the second system uses styrene added to a partially polymerized 45 wt % styrene to 55 wt % butyl methacrylate host particle. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 345–351, 2000     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Synthesis of polymeric core–shell particles using surface‐initiated living free‐radical polymerization

An easy and novel approach to the synthesis of functionalized nanostructured polymeric particles is reported. The surfactant‐free emulsion polymerization of methyl methacrylate in the presence of the crosslinking reagent 2‐ethyl‐2‐(hydroxy methyl)‐1,3‐propanediol trimethacrylate was used to in situ crosslink colloid micelles to produce stable, crosslinked polymeric particles (diameter size ～ 100–300 nm). A functionalized methacrylate monomer, 2‐methacryloxyethyl‐2′‐bromoisobutyrate, containing a dormant atom transfer radical polymerization (ATRP) living free‐radical initiator, which is termed an inimer (initiator/monomer), was added to the solution during the polymerization to functionalize the surface of the particles with ATRP initiator groups. The surface‐initiated ATRP of different monomers was then carried out to produce core–shell‐type polymeric nanostructures. This versatile technique can be easily employed for the design of a wide variety of polymeric shells surrounding a crosslinked core while keeping good control over the sizes of the nanostructures. The particles were characterized with scanning electron microscopy, transmission electron microscopy, optical microscopy, dynamic light scattering, and Raman spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1575–1584, 2007     

Modeling the effect of compatibilizers in the coarsening of ternary polymer blends with core‐shell morphology

Numerical simulations of the phase separation and coarsening of particulate, ternary polymer blends have been performed using a ternary form of the modified Cahn–Hilliard equation. The third component was chosen to be a compatibilizer, typically being a random copolymer of the major components. The results show that compatibilized blends follow the same Lifshitz–Slyozov coarsening law as binary systems. Slower coarsening rates, indicating system stabilization, were observed for blends containing ∼10% compatibilizer and exhibiting a core‐shell morphology. Larger amounts of compatibilizer resulted in significantly higher coarsening rates. This appears to be a result of the greater affinity of the compatibilizer for the major component and warrants further experimental investigation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1301–1306, 2000     

Synthesis of core‐shell poly(divinylbenzene) microspheres via reversible addition fragmentation chain transfer graft polymerization of styrene

Styrene has been grafted from crosslinked poly(divinylbenzene) core microspheres by both reversible addition fragmentation chain transfer (RAFT) polymerization and conventional free radical polymerization. The core microspheres were prepared by precipitation polymerization. Crosslinked poly(DVB) core microspheres containing double bonds on the particle surface can be used directly to graft polymers from the surface by RAFT without prior modification of the core microspheres. The RAFT agent 1‐phenylethyl dithiobenzoate (PEDB) was used: Particle sizes increased from 2 μm up to 3.06 μm, and the particle weight increased by up to 6.5%. PEDB controls the particle weight gain, the particle volume, and the molecular weight of the soluble polymer. PEDB was also used to synthesize core poly(DVB) RAFT microspheres that contain residual RAFT end groups on the surface and within the particle. Styrene was subsequently grafted from the surface of these core poly(DVB) RAFT microspheres. The generated microspheres were characterized by ¹H‐NMR spectroscopy, focused ion beam (FIB) milling, Coulter particle sizing, and size exclusion chromatography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5067–5076, 2004     

PMMA‐based core‐shell nanoparticles with various PTFE cores

Polytetrafluoroethylene (PTFE) latices with spherical and rod‐like particles in the submicrometer size range, were employed as seeds in the emulsifier‐free methylmethacrylate (MMA) emulsion polymerization to obtain PTFE‐polymethylmethacrylate (PMMA) core‐shell nanoparticles. Stable latices were generally obtained. No residual PTFE was found at the end of the reaction. By appropriately choosing the ratio between MMA and PTFE in the reaction mixture, particles with predetermined size and monodisperse or narrow size distribution were prepared. The high structural regularity of the core‐shell samples allows the preparation of film with a periodic distribution of the cores thus ultimately leading to a well structured 2D colloidal crystal. A very peculiar crystallization behavior was observed because of the PTFE compartmentalization in the composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2928–2937, 2009     

Synthesis of core‐shell structured carboxylated microparticles with a straightforward procedure and their evaluation as a polymer support

Poly(trimethylolpropane trimethacrylate) microspheres with a narrow size distribution were obtained by precipitation polymerization. They were subsequently modified by surface grafting with acrylic acid in a polar ethanol–water reaction medium, without stabilizer, yielding core‐shell particles with diameters in the micrometer range. The resulting polymeric material was characterized by SEM and potentiometric titration, FTIR spectroscopy, and thermal analysis. It was shown that the particle characteristics (size, size distribution, and functionality) obtained by this straightforward procedure can be controlled by modifying the synthesis parameters (monomer concentration, agitation rate, and temperature). The high functionality, the chemical and physico‐mechanical stability, as well as the possibility to control the performances of the resulting polymeric materials by synthesis allow its applications in various areas. Envisaging separation and catalysis domains, Cu(II), Cd(II), and Cr(III) uptake capacity from aqueous solutions was investigated under noncompetitive conditions as a function of synthesized particle functionality, time, and pH range. It was also found that the addition of the carboxylated microparticles to polyethylene stabilized with α‐tocopherol improved the thermo‐oxidative behaviour of the polymeric material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5889–5898, 2005     

IR spectra studies of core‐shell type waterborne polyacrylate‐polyurethane microemulsions

The hydrogen bonds in films of the polyurethane and the core‐shell type polyacrylate‐polyurethane microemulsions have been studied by FTIR spectroscopy in the regions of  NH absorption and CO absorption. The effects on hydrogen bonds of the composition, the core‐shell ratio were revealed. At the same time, the relationship between the hydrogen bonds and the crosslinked structures (Type A and Type B) was discovered. The shifts of the  NH and CO stretching bands to higher frequencies and the shift of  NH bending bands to lower frequencies, with the increase of acetone CO number in the core, mean that the hydrogen bonds between the soft and hard segments, and those in the short‐range order in the hard segment phase, are broken. The dipole/dipole interaction which is supposed to exist between the acetone CO groups in the core and the urethane CO in the shell can change the hydrogen bond distribution in the shell, and at the same time, lead to hydrogen bonds between acetone CO in the core and the urethane  NH in the shell. Type A and B crosslinked structure between the core and the shell located at the interface of the core and the shell can confine the acetone CO within the crosslinking network, and Type B crosslinked structure also decreases the acetone CO numbers. These weaken the dipole/dipole interaction between the acetone CO and the urethane CO, and lead to the decrease of the effect of the acetone CO groups on the hydrogen bond distribution in the shell. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2642–2650, 1999     

Cagelike polymer microspheres with hollow core/porous shell structures

Submicron‐scaled cagelike polymer microspheres with hollow core/porous shell were synthesized by self‐assembling of sulfonated polystyrene (PS) latex particles at monomer droplets interface. The swelling of the PS latex particles by the oil phase provided a driving force to develop the hollow core. The latex particles also served as porogen that would disengage automatically during polymerization. Influential factors that control the morphology of the microspheres, including the reserving time of emulsions, polymerization rate, and the Hildebrand solubility parameter and polarity of the oil phase, were studied. A variety of monomers were polymerized into microspheres with hollow core/porous shell structure and microspheres with different diameters and pore sizes were obtained. The polymer microspheres were characterized by scanning electron microscopy, transmission electron microscopy, optical microscopy, and Fourier transform infrared spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 933–941, 2007     

Synthesis and mechanical strength of a novel double network nanocomposite hydrogel with core‐shell structure

A novel poly[(dimethylimino)(2‐hydroxy‐1,3‐propanedily)chloride]/Laponite/polyacrylic acid (PDMIHPC/Clay/PAA) hydrogel was synthesized by two‐step solution polymerization combining the strategies of both nanocomposite (NC) gels and double network (DN) gels. The chemical composition and core‐shell structure of the hydrogels were confirmed by Fourier transform infrared (FTIR) and transmission electron microscopy (TEM). The mechanical strength was examined by varying the reaction temperature, PDMIHPC/Clay composite dose, N,N′‐methylenebisacrylamide (MBAM) dose and water content. When the reaction temperature was 35°C, PDMIHPC/Clay composite/AA is 1:10 and MBAM dose was 0.050 wt% (based on the weight of AA), the novel hydrogel achieved a best compressive strength of 100.05 KPa with a water content of 98.8%. Copyright © 2011 John Wiley & Sons, Ltd.     

pH‐responsive polymer core–shell nanospheres for drug delivery

Stimuli‐responsive polymer nanoparticles are playing an increasingly more important role in drug delivery applications. However, limited knowledge has been accumulated about processes which use stimuli‐responsive polymer nanospheres (matrix nanoparticles whose entire mass is solid) to carry and deliver hydrophobic therapeutics in aqueous solution. In this research, pyrene was selected as a model hydrophobic drug and a pyrene‐loaded core‐shell structured nanosphere named poly(DEAEMA)‐poly(PEGMA) was designed as a drug carrier where DEAEMA and PEGMA represent 2‐(diethylamino)ethyl methacrylate and poly(ethylene glycol) methacrylate, respectively. The pyrene‐loaded core‐shell nanospheres were prepared via an in situ two‐step semibatch emulsion polymerization method. The particle size of the core‐shell nanosphere can be well controlled through adjusting the level of surfactant used in the polymerization where an average particle diameter of below 100 nm was readily achieved. The surfactant was removed via a dialysis operation after polymerization. Egg lecithin vesicles (liposome) were prepared to mimic the membrane of a cell and to receive the released pyrene from the nanosphere carriers. The in vitro release profiles of pyrene toward different pH liposome vesicles were recorded as a function of time at 37 °C. It was found that release of pyrene from the core‐shell polymer matrix can be triggered by a change in the environmental pH. In particular the pyrene‐loaded nanospheres are capable of responding to a narrow window of pH change from pH = 5, 6, to 7 and can achieve a significant pyrene release of above 80% within 90 h. The rate of release increased with a decrease in pH. A first‐order kinetic model was proposed to describe the rate of release with respect to the concentration of pyrene in the polymer matrix. The first‐order rate constant of release k was thus determined as 0.049 h^?1 for pH = 5; 0.043 h^?1 for pH = 6; and 0.035 h^?1 for pH = 7 at 37 °C. The release of pyrene was considered to follow a diffusion‐controlled mechanism. The synthesis and encapsulation process developed herein provides a new approach to prepare smart nanoparticles for efficient delivery of hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4440–4450     

Enhanced dielectric properties of polymer composite films induced by encapsulated MWCNTs with a one core‐two shell structure

Multiwalled carbon nanotubes (MWCNTs) can endow high dielectric constant to polymer‐based composites. However, the accompanying poor dispersion of MWCNTs and high dielectric loss for composites severely limit their application in dielectric field. Herein, a modified acid‐treated MWCNTs encapsulated by the polyaniline/poly(sodium 4‐styrenesulfonate) layers (aMWCNTs@PANI‐PSS) with a one core‐two shell structure was fabricated by in situ polymerization followed by electrostatic self‐assembly technique. Furthermore, the composite films based on aMWCNTs@PANI‐PSS/poly(vinylidenefluoride‐hexaflouropropylene) (PVDF‐HFP) were fabricated by a solution‐casting method. An ultrathin insulating PSS shell is wrapped onto aMWCNTs@PANI, resulting in the improvement of dispersibility for aMWCNTs@PANI and the decrease of dielectric loss for composite films. When the content of aMWCNTs@PANI‐PSS is 5.0 wt %, the dielectric constant of aMWCNTs@PANI‐PSS/PVDF‐HFP reaches 430 (100 Hz), which is about 55 times of pure PVDF‐HFP and 1.7 times of aMWCNTs@PANI/PVDF‐HFP (247). Besides, the responding dielectric loss of aMWCNTs@PANI‐PSS/PVDF‐HFP composite film is only 0.67, much lower than that of aMWCNTs@PANI/PVDF‐HFP (25) and aMWCNTs/PVDF‐HFP (3185). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 948–956     

Probing the surfaces of core‐shell and hollow nanoparticles by solvent relaxation NMR

Measurement of the spin–spin NMR relaxation time (or its inverse, the rate) of water molecules in aqueous nanoparticle dispersions has become a popular approach to probe of the nature and structure of the particle surface and any adsorbed species. Here, we report on the characterisation of aqueous dispersions of hollow amorphous nanoparticles that have two liquid accessible surfaces (inner cavity surface and outer shell surface) plus the solid (silica) and core‐shell (titania–silica) nanoparticle precursors from which the hollow particles have been prepared. In all cases, the observed water relaxation rates scale linearly with particle surface area, with the effect being more pronounced with increasing levels of titania present at the particle surface. Two distinct behaviours were observed for the hollow nanoparticles at very low volume fractions, which appear to merge with increasing surface area (particle concentration). Herewith, we further show the versatility of solvent NMR spectroscopy as a probe of surface character.     

Thermal behavior of core‐shell rubber/styrene monomer gels

The thermal behavior of core‐shell rubber (CSR)/styrene monomer mixtures was studied using subambient differential scanning calorimetry (DSC). Interaction between the styrene and CSR material was observed as a depression of the freezing and melting points of the styrene monomer and as a shift in the glass transition temperature of the rubbery phase in the CSR materials. The depression of the freezing point of the styrene in the CSR/styrene mixtures was related to the size of the critical nuclei required for crystallization. The heat of crystallization was found to decrease linearly with decreasing styrene content, but calculations showed that not all of the styrene present in the mixtures crystallized upon cooling, confirming that there was an interaction between the CSR material and the styrene monomer. At temperatures below the glass transition temperature of the system, the mixtures contain a pure styrene crystalline phase and an amorphous CSR/styrene phase. The styrene was found to act as a plasticizer, reducing the glass transition temperature of the rubbery core material. The variation of the glass transition temperature of the CSR/styrene systems was determined with respect to the composition of the amorphous phase. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3136–3150, 2000     

Cyclodextrin‐overhanging hyperbranched core‐double‐shell miktoarm architectures: Synthesis and gradient stimuli‐responsive properties

We report the synthesis and gradient stimuli‐responsive properties of cyclodextrin‐overhanging hyperbranched core‐double‐shell miktoarm architectures. A ionic hyperbranched poly(β‐cyclodextrin) (β‐CD) core was firstly synthesized via a convenient “A₂+B₃” approach. Double‐layered shell architectures, composed of poly(N‐isopropyl acrylamide) (PNIPAm) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) miktoarms as the outermost shell linked to poly(N,N‐diethylaminoethyl methacrylate) (PDEAEMA) homoarms which form the inner shell, were obtained by a sequential atom transfer radical polymerization (ATRP) and parallel click chemistry from the modified hyperbranched poly(β‐CD) macroinitiator. The combined characterization by ¹H NMR, ¹³C NMR, ¹H‐²⁹Si heteronuclear multiple‐bond correlation (HMBC), FTIR and size exclusion chromatography/multiangle laser light scattering (SEC/MALLS) confirms the remarkable hyperbranched poly(β‐CD) core and double‐shell miktoarm architectures. The gradient triple‐stimuli‐responsive properties of hyperbranched core‐double‐shell miktoarm architectures and the corresponding mechanisms were investigated by UV–vis spectrophotometer and dynamic light scattering (DLS). Results show that this polymer possesses three‐stage phase transition behaviors. The first‐stage phase transition comes from the deprotonation of PDEAEMA segments at pH 9–10 aqueous solution under room temperature. The confined coil‐globule conformation transition of PNIPAm and PDMAEMA arms gives rise to the second‐stage hysteretic cophase transition between 38 and 44 °C at pH 10. The third‐stage phase transition occurs above 44 °C at pH = 10 attributed to the confined secondary conformation transition of partial PDMAEMA segments. This cyclodextrin‐overhanging hyperbranched core‐double‐shell miktoarm architectures are expected to solve the problems of inadequate functionalities from core layer and lacking multiresponsiveness for shell layers existing in the dendritic core‐multishell architectures. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tb(III)‐modified properties of thermosensitive core–shell microspheres

A novel functional complex with the thermosensitive, magnetic, and fluorescent properties of poly(N‐isopropylacrylamide)‐grafted poly(N‐isopropylacrylamide‐co‐styrene) (PNNS) microspheres and Tb(III), PNNS–Tb(III), has been synthesized and characterized with different techniques. When PNNS with a core–shell structure interacts with Tb(III), Tb(III) mainly bonds to oxygen of the carbonyl groups of PNNS, forming the novel PNNS–Tb(III) complex. PNNS shows antiferromagnetic behavior, whereas the PNNS–Tb(III) complex exhibits paramagnetic behavior. The saturation magnetization is approximately 50 times higher than that of PNNS. The fluorescence intensity of the PNNS–Tb(III)complex at 545 nm is enhanced as much as 223 times in comparison with that of pure Tb(III). The novel magnetic and fluorescent properties of the PNNS–Tb(III) complex may be useful in biomedicine and fluorescence systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3121–3127, 2006     

Solution route to inorganic nanobelt‐conducting organic polymer core‐shell nanocomposites

A facile and versatile solution‐based approach was developed to prepare semiconductor metal oxide nanobelt‐conducting organic polymer core‐shell nanocomposites. Well‐defined nanobelts of several types of oxide nanobelts were combined with conducting polymer [polypyrrole (PPy) and polyaniline (PANi)] via in situ polymerization in aqueous solution to obtain a new type of inorganic–organic composite nanostructure. Samples were characterized by using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, electron energy loss spectra, high‐resolution transmission electron microscopy, and ultraviolet–visible techniques. Electron energy loss spectra revealed the existence of C?C and C? N bonds in coating layers to prove the encapsulation of PPy or PANi. The red‐shift of absorption band at high‐energy was observed for PPy‐encapsulated composites via ultraviolet–visible spectroscopy, and significant absorption band shifts were also encountered to PANi‐encapsulated composites, which suggest possibilities of band‐gap tuning of such metal oxide‐conducting polymer composites to be applied especially in solar cell devices. However, the sacrifice of nanobelts‐core led to hollow structures of PPy and PANi, which expands the synthetic strategies to prepare conducting polymer nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2892–2900, 2005