Kinetics of the reaction O(3P) + SO2 + M → SO3 + M over the temperature range of 299°–440°K

Rate constants for the reaction O(³P) + SO₂ + M have been determined over the temperature range of 299°–440°K, using a flash photolysis–NO₂ chemiluminescence technique. For M?Ar, the Arrhenius expression was obtained. At room temperature k₂^Ar = (1.05 ± 0.21) × 10^?33 cm⁶/molec²·sec. In addition, the rate constants k₂ = (1.37 + 0.27) × 10^?33 cm⁶/molec²·sec, k₂ = (9.5 ± 3.0) ± 10^?33 cm⁶/molec²·sec, k₃ = (1.1 ± 0.2) ± 10^?31 cm⁶/molec²·sec, and k₃ = (2.6 ? 0.9) ± 10^?31 cm⁶/molec²·sec were obtained at room temperature where k₃^M is the rate constant for the reaction O + NO + M → NO₂ + M. The rate data are compared and discussed with literature values.     

Activation parameters and kinetic isotope effect in the system tropaeolin O-OH−

The kinetics of the deprotonation of tropaeolin O by OH^? ions was investigated between 9° and 30°C, and by OD^? ions at 24.7°C. The pH range was 10.7–12.5, and the ionic strength 0.1M throughout. All results were obtained by the temperature jump method. On the basis of a mechanism suggested earlier, rate constants k₃₁ for the reaction between OL^? and the internally bonded weak acid and k₃₂ for the opening of the internal hydrogen bond were evaluated. The activation energies in ordinary water were found to be ΔH≠₃₁ = 3.6 kcal/mol, ΔS≠₃₁ = –19 eu, and ΔH≠₃₂ = 27 kcal/mol, ΔS≠₃₂ = 46 eu. The kinetic isotope effect was k₃₁/k₃₁ ～ 1.5 and k₃₂/k₃₂ ～ 0.9. The unusual results for reaction path are discussed in terms of solvent participation.     

Relative rate constants for removal of vibrationally excited OH(X2πi)v=9 by some small molecules at room temperature

Vibrationally excited OH in v = 9 [designated OH^?(9)] was generated by the reaction of hydrogen atoms with ozone in a fast-flow discharge system at 300 ± 3 K and a total pressure of 1.1 ± 0.1 torr, with argon as the carrier gas. The addition of a species X, which can deactivate the OH^?(9) or react with it, led to a decrease in the Meinel band chemiluminescent emission intensities at both 626 nm (9 → 3 band) and 519 nm (9 → 2 band), which were monitored as a function of the concentration of X. Application of the kinetic scheme developed previously for this chemical system gave the relative rate constant for the removal of OH^?(9) by X. The relative rate constants determined in this study, taking O₂ as the reference deactivator (k = 1.0), are as follows: He ≤ 0.02; H₂ ≤ 0.05; SF₆ 0.09 ± 0.01; CF₄ 0.19 ± 0.01; N₂O 3.5 ± 0.4; NO 17.7 ± 1.5; H₂O 74.3 ± 2.9; D₂O 57.6 ± 2.0; NH₃ 61.3 ± 1.9; ND₃ 58.7 ± 1.6; SO₂ 7.1 ± 1.4; COS 8.4 ± 1.7; H₂S 33.7 ± 8.4; CH₄ 1.56 ± 0.03; CD₄ 1.06 ± 0.06. Application of these relative rate constants to conditions in the upper atmosphere (60–100 km) suggests that OH^?(9) is removed primarily by deactivation by O₂, and at altitudes ?90 km, possibly by O(³P). However, since O₂ is unusually efficient for a homonuclear diatomic in deactivating OH^?(9), it may not be the primary deactivator for the lower (v ≤ 8) vibrational levels. These results are compared to earlier studies of OH^?(9), and possible mechanisms of interaction of OH^?(9) with these molecules are discussed.     

Studies on the composition and kinetics of chromium(III)-alanine system

Kinetics of the complex formation of chromium(III) with alanine in aqueous medium has been studied at 45, 50, and 55°C, pH 3.3–4.4, and μ = 1 M (KNO₃). Under pseudo first-order conditions the observed rate constant (k_obs) was found to follow the rate equation: Values of the rate parameters (k_an, k, K_IP, and K) were calculated. Activation parameters for anation rate constants, ΔH^≠(k_an) = 25 ± 1 kJ mol^?1, ΔH^≠(k) = 91 ± 3 kJ mol^?1, and ΔS^≠(k_an) = ?244 ± 3 JK^?1 mol^?1, ΔS^≠(k) = ?30 ± 10 JK^?1 mol^?1 are indicative of an (I_a) mechanism for k_an and (I_d) mechanism for k routes (‥substrate Cr(H₂O) is involved in the k route whereas Cr(H₂O)₅OH²⁺ is involved in k′ route). Thermodynamic parameters for ion-pair formation constants are found to be ΔH°(K_IP) = 12 ± 1 kJ mol^?1, ΔH°(K) = ?13 ± 3 kJ mol^?1 and ΔS°(K_IP) = 47 ± 2 JK^?1 mol^?1, and ΔS°(K) = 20 ± 9 JK^?1 mol^?1.     

Hydroxylation of 4‐Amino‐5‐hydroxynaphthalene‐2,7‐disulfonic Acid Monosodium Salt Catalysed by Horseradish Peroxidase and Hydrogen Peroxide: Computation of Kinetic Parameters Including Its Application to Crude Plant Extracts

The new spectrophotometric assay method for the quantification of peroxidase activity uses 4‐amino‐5‐hydroxynaphthalene‐2,7‐disulfonicacid monosodium salt (AHNDSA) as chromogenic co‐substrate. The method is based on hydroxylation of AHNDSA in presence of H₂O₂/peroxidase forming quinone, having λ_max = 460 nm in the acetate buffer (pH = 4.0) at 30 °C. The linearity of H₂O₂ by kinetic method was 10–332 µM and for peroxidase by kinetic and fixed time methods were 1.18–18.92 and 1.18–9.46 nM, respectively. Catalytic efficiency and catalytic power for peroxidase assay were 7.965 × 10⁴ M^?1min^?1 and 3.76 × 10^?4 min^?1, respectively. From the plot of d(1/A_o) vs d(1/V_o) and d(1/H_o) vs d(1/V_o), the apparent Michaelis‐Menten constants for H₂O₂ and AHNDSA were K = 68 and K = 275 µM, respectively. The method was tested with some plant extracts and also compared with guaiacol/peroxidase system. Except Boerhavia diffusa, all other tested plant samples showed highest peroxidase activity. The proposed method is a rapid and convenient method to determine peroxidase activity by spectrophotometer. This method for the first time reports peroxidase activity in Lantana camara and Oplismenus compositus plants. Kinetic results showed that AHNDSA/peroxidase system can be better hydrogen donor for peroxidase assay than guaiacol system.     

New RuII(arene) Complexes with Halogen‐Substituted Bis‐ and Tris(pyrazol‐1‐yl)borate Ligands

[RuCl(arene)(μ‐Cl)]₂ dimers were treated in a 1:2 molar ratio with sodium or thallium salts of bis‐ and tris(pyrazolyl)borate ligands [Na(Bp)], [Tl(Tp)], and [Tl(Tp^{iPr, 4Br})]. Mononuclear neutral complexes [RuCl(arene)(κ²‐Bp)] ( 1 : arene=p‐cymene (cym); 2 : arene=hexamethylbenzene (hmb); 3 : arene=benzene (bz)), [RuCl(arene)(κ²‐Tp)] ( 4 : arene=cym; 6 : arene=bz), and [RuCl(arene)(κ²‐Tp^{iPr, 4Br})] ( 7 : arene=cym, 8 : arene=hmb, 9 : arene=bz) have been always obtained with the exception of the ionic [Ru₂(hmb)₂(μ‐Cl)₃][Tp] ( 5′ ), which formed independently of the ratio of reactants and reaction conditions employed. The ionic [Ru(CH₃OH)(cym)(κ²‐Bp)][X] ( 10 : X=PF₆, 12 : X=O₃SCF₃) and the neutral [Ru(O₂CCF₃)(cym)(κ²‐Bp)] ( 11 ) have been obtained by a metathesis reaction with corresponding silver salts. All complexes 1 – 12 have been characterized by analytical and spectroscopic data (IR, ESI‐MS, ¹H and ¹³C NMR spectroscopy). The structures of the thallium and calcium derivatives of ligand Tp, [Tl(Tp)] and [Ca(dmso)₆][Tp]₂ ? 2 DMSO, of the complexes 1 , 4 , 5′ , 6 , 11 , and of the decomposition product [RuCl(cym)(Hpz^{iPr, 4Br})₂][Cl] ( 7′ ) have been confirmed by using single‐crystal X‐ray diffraction. Electrochemical studies showed that 1 – 9 and 11 undergo a single‐electron Ru^II→Ru^III oxidation at a potential, measured by cyclic voltammetry, which allows comparison of the electron‐donor characters of the bis‐ and tris(pyrazol‐1‐yl)borate and arene ligands, and to estimate, for the first time, the values of the Lever E_L ligand parameter for Bp, Tp, and Tp^{iPr, 4Br}. Theoretical calculations at the DFT level indicated that both oxidation and reduction of the Ru complexes under study are mostly metal‐centered with some involvement of the chloride ligand in the former case, and also demonstrated that the experimental isolation of the μ³‐binuclear complex 5′ (instead of the mononuclear 5 ) is accounted for by the low thermodynamic stability of the latter species due to steric reasons.     

Subgroup‐chain symmetry‐adapted irreducible matrices and CG coefficients of point groups

The irreducible matrices and Clebsch–Gordan coefficients of any crystallographic point group adapted to all possible canonical subgroup chains are calculated ab initio for both single‐valued and double‐valued representations and tabulated with exact values in the form of or and with components labeled by the irrep labels of the group chain in Koster notation. The phases and ordering of the components of irreducible bases for the cubic point groups are properly chosen so that irreducible matrices for all subgroup chains of G=T_d, O, O_h obey the associated relations D(G)=D(G)D(G), i=4, 6, and the complex conjugation relation for the group T, D(T)=D(T)*. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 75: 67–80, 1999     

Hydrolysis of plutonium(VI) at variable temperatures (283-343 K)

The hydrolysis of Pu^VI was studied at variable temperatures (283–343 K) by potentiometry, microcalorimetry, and spectrophotometry. Three hydrolysis reactions, mPuO₂²⁺+nH₂O=(PuO₂)_m(OH)_n+nH⁺), in which (n,m)=(1,1), (2,2), and (5,3), were invoked to describe the potentiometric and calorimetric data. The equilibrium constants (*β_n,m) were determined by potentiometry at 283, 298, 313, 328, and 343 K. As the temperature was increased from 283 to 343 K, *β_1,1, *β_2,2, and *β_5,3, increased by 1, 1.5, and 4 orders of magnitude, respectively. The enhancement of hydrolysis at elevated temperatures is mainly due to the significant increase of the degree of ionization of water as the temperature increases. Measurements by microcalorimetry indicate that the three hydrolysis reactions are all endothermic at 298.15 K, with enthalpies of (35.0±3.4) kJ mol^?1, (65.4±1.0) kJ mol^?1, and (127.7±1.7) kJ mol^?1 for ΔH_1,1, ΔH_2,2, and ΔH_5,3, respectively. The hydrolysis constants at infinite dilution have been obtained with the Specific Ion Interaction approach. The applicability of three approaches for estimating the equilibrium constants at different temperatures, including the constant enthalpy approach, the DQUANT equation, and the Ryzhenko–Bryzgalin model, were evaluated with the data from this work.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

Horse radish peroxidase immobilized polyaniline for hydrogen peroxide sensor

Horse radish peroxidase (HRP) has been electrochemically entrapped into perchlorate (ClO) doped polyaniline (PANI) film deposited onto indium‐tin‐oxide (ITO) coated glass plate. This HRP‐PANI‐ClO/ITO bioelectrode characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), UV‐Visible spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) techniques has been utilized for estimation of hydrogen peroxide (H₂O₂). This H₂O₂ sensor exhibits response time of 5 s, linearity from 3 to 136 mM, sensitivity as 0.5638 µA mM^?1 cm^?2 with linear regression of 0.985. The value of the Michaelis–Menten constant (K_m) has been obtained as 1.984 mM. Copyright © 2009 John Wiley & Sons, Ltd.     

Variable-Temperature and Variable-Pressure 17O-NMR Study of Water Exchange of Hexaaquaaluminium(III)

The transverse relaxation rate of H₂O in Al(H₂O) has been measured as a function of temperature (255 to 417 K) and pressure (up to 220 MPa) using the ¹⁷O-NMR line-broadening technique, in the presence of Mn(II) as a relaxation agent. At high temperatures the relaxation rate is governed by chemical exchange with bulk H₂O, whereas at low temperatures quadrupolar relaxation is prevailing. Low-temperature fast-injection ¹⁷O-NMR was used to extend the accessible kinetic domain. The samples studied contained Al³⁺ (0.5 m), Mn²⁺ (0.2–0.5 m), H ⁺ (0.2–3.1 m) and ¹⁷O-enriched (20–40%) H₂O. Non-coordinating perchlorate was used as counter ion. The following H₂O exchange parameters were obtained: k = (1.29 ± 0.04) s⁻¹, ΔH* = (84.7 ± 0.3) kJ mol⁻¹, ΔS* = +(41.6 ± 0.9) J K ⁻¹ mol⁻¹, and ΔV = +(5.7 ± 0.2) cm³ mol⁻¹, indicating a dissociative interchange, I_d, mechanism. These results of H₂O exchange on Al(H₂O) are discussed together with the available complex-formation rate data and permit also the assignment of I_d mechanisms to these latter reactions.     

Addition of Ethylene or Hydrogen to a Main‐Group Metal Cluster under Mild Conditions

Reaction of the tin cluster Sn₈(Ar)₄ (Ar=C₆H₂‐2,6‐(C₆H₃‐2,4,6‐Me₃)₂) with excess ethylene or dihydrogen at 25 °C/1 atmosphere yielded two new clusters that incorporated ethylene or hydrogen. The reaction with ethylene yielded Sn₄(Ar)₄(C₂H₂)₅ that contained five ethylene moieties bridging four aryl substituted tin atoms and one tin–tin bond. Reaction with H₂ produced a cyclic tin species of formula (Sn(H)Ar)₄, which could also be synthesized by the reaction of {(Ar)Sn(μ‐Cl)}₂ with DIBAL‐H. These reactions represent the first instances of direct reactions of isolable main‐group clusters with ethylene or hydrogen under mild conditions. The products were characterized in the solid state by X‐ray diffraction and IR spectroscopy and in solution by multinuclear NMR and UV/Vis spectroscopies. Density functional theory calculations were performed to explain the reactivity of the cluster.     

Reactivity of dpph• in the oxidation of catechol and catechin

A kinetic study of the reduction of pyrocatechol and catechin by dpph^? radical has been carried out in various ratios of CH₃OH/H₂O mixed solvent at pH 5.5–7.5, μ = 0.10 M [(n‐Bu)₄N]ClO₄, and T = 25°C. The rate constants of oxidation in aqueous solvent, k, were obtained from the extrapolation of the linear plots of the specific rate constants k vs. % H₂O plots at each pH value. A linear relationship between k and 1/[H⁺] was observed for both flavonoids with k = k₁K_a1/[H⁺], where K_a1 was the first acid dissociation constant on the catechol ring and k₁ is the rate constant of the oxidation of the mononegative species HX^?. The values of k₁ obtained from the slopes of the plots are (8.2 ± 0.2) × 10⁵ and (6.1 ± 0.1) × 10⁵ M^?1 s^?1 for pyrocatechol and catechin, respectively. The analysis of the reaction on the basis of Marcus theory for an outer‐sphere electron transfer reaction yielded a value of 3.7 × 10³ M^?1 s^?1 for the self‐exchange rate constant of dpph^?/dpphH couple. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 147–153, 2011     

Aldehyde‐Assisted Hydrogen Transfer during the Formation of Hydride–Iridafurans from Alkynes and Aldehydes

The bis(ethylene) Ir^I complex [TpIr(C₂H₄)₂] ( 1 ; Tp=hydrotris(3,5‐dimethylpyrazolyl)borate) reacts with two equivalents of aromatic or aliphatic aldehydes in the presence of one equivalent of dimethyl acetylenedicarboxylate (DMAD) with ultimate formation of hydride iridafurans of the formula [TpIr(H){C(R¹)?C(R²)C(R³)O }] (R¹=R²=CO₂Me; R³=alkyl, aryl; 3 ). Several intermediates have been observed in the course of the reaction. It is proposed that the key step of metallacycle formation is a C? C coupling process in the undetected Ir^I species [TpIr{η¹‐O‐R³C(?O)H}(DMAD)] ( A ) to give the trigonal‐bipyramidal 16 e^? Ir^III intermediates [TpIr{C(CO₂Me)?C(CO₂Me)C(R³)(H)O }] ( C ), which have been trapped by NCMe to afford the adducts 11 (R³=Ar). If a second aldehyde acts as the trapping reagent for these species, this ligand acts as a shuttle in transfering a hydrogen atom from the γ‐ to the α‐carbon atom of the iridacycle through the formation of an alkoxide group. Methyl propiolate (MP) can be used instead of DMAD to regioselectively afford the related iridafurans. These reactions have also been studied by DFT calculations.     

A Zipper‐like Supramolecular Double‐Chain based on 1 D π‐π Stacking Interactions: Synthesis and Crystal Structure of [Cu(phen)(C4H4O4)(H2O)]2 · C4H6O4 (phen = 1,10‐phenanthroline)

[Cu(C₁₂H₈N₂)(C₄H₄O₄)(H₂O)]₂ · C₄H₆O₄ was prepared by the reaction of succinic acid, CuCl₂ · 2 H₂O, 1,10‐phenanthroline (phen = C₁₂H₈N₂), and Na₂CO₃ in a CH₃OH–H₂O solution. The crystal structure (triclinic, P 1 (no. 2), a = 7.493(1), b = 9.758(1), c = 13.517(1) Å; α = 68.89(1)°, β = 88.89(1)°, γ = 73.32(1)°, Z = 1, R = 0.0308, wR² = 0.0799 for 3530 observed reflections (F ≥ 2σ(F ) out of 3946 unique reflections) consists of hydrogen bonded succinic acid molecules and succinato bridged 1 D zipperlike supramolecular [Cu(phen)(C₄H₄O₄)_2/2(H₂O)]₂ double chains based on 1 D π‐π stacking interactions between the chelating phen systems at distances of 3.71 Å and 3.79 Å. The Cu atoms are fivefold trigonal bipyramidally coordinated by two N atoms of the bidentate chelating phen ligand and three O atoms of one water molecule and two bidentate bridging succinate ligands. The water O atom and one phen N atom are at the apical positions (equatorial: d(Cu–O) = 1.945, 2.254(2) Å, d(Cu–N) = 2.034(2) Å; axial: d(Cu–O) = 1.971(2) Å, d(Cu–N) = 1.995 Å).     

The heats of formation of NO3− and NO3− association complexes with HNO3 and HBr

The equilibrium constant for the reaction has been determined between 331 and 480°K using a variable-temperature flowing afterglow. These data give ΔH°(1) = -1.03 ± 0.21 kcal/mol and ΔS°(1) = —4.6 ± 1.0 cal/mol°K. When combined with the known thermochemical values for HBr, Br^?, and HNO₃, this yields ΔH(NO₃^?) = -74.81 ± 0.54 kcal/mol and S(NO₃^?) = 59.4 cal/mol·°K. In addition ΔH_n-1,n and ΔS_n-1,nfor the gas-phase reactions were determined for n = 2 and 3. The implications of these measurements to gas-phase negative ion chemistry are discussed.     

Depolymerization kinetics of di(4‐tert‐butyl cyclohexyl) itaconate and Mark‐Houwink‐Kuhn‐Sakurada parameters of di(4‐tert‐butyl cyclohexyl) itaconate and di‐n‐butyl itaconate

Multipulse pulsed laser polymerization coupled with size exclusion chromatography (MP‐PLP‐SEC) has been employed to study the depropagation kinetics of the sterically demanding 1,1‐disubstituted monomer di(4‐tert‐butylcyclohexyl) itaconate (DBCHI). The effective rate coefficient of propagation, k, was determined for a solution of monomer in anisole at concentrations, c, 0.72 and 0.88 mol L^?1 in the temperature range 0 ≤ T ≤ 70 °C. The resulting Arrhenius plot (i.e., ln k vs. 1/RT) displayed a subtle curvature in the higher temperature regime and was analyzed in the linear part to yield the activation parameters of the forward reaction. In the temperature region where no depropagation was observed (0 ≤ T ≤ 50 °C), the following Arrhenius parameters for k_p were obtained (DBCHI, E_p = 35.5 ± 1.2 kJ mol^?1, ln A_p = 14.8 ± 0.5 L mol^?1 s^?1). In addition, the k data was analyzed in the depropagatation regime for DBCHI, resulting in estimates for the associated entropy (?ΔS = 150 J mol^?1 K^?1) of polymerization. With decreasing monomer concentration and increasing temperature, it is increasingly more difficult to obtain well structured molecular weight distributions. The Mark Houwink Kuhn Sakurada (MHKS) parameters for di‐n‐butyl itaconate (DBI) and DBCHI were determined using a triple detection GPC system incorporating online viscometry and multi‐angle laser light scattering in THF at 40 °C. The MHKS for poly‐DBI and poly‐DBCHI in the molecular weight range 35–256 kDa and 36.5–250 kDa, respectively, were determined to be K_DBI = 24.9 (10³ mL g^?1), α_DBI = 0.58, K_DBCHI = 12.8 (10³ mL g^?1), and α_DBCHI = 0.63. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1931–1943, 2007     

The second limit of hydrogen + carbon monoxide + oxygen mixtures

Previous studies by Buckler and Norrish of the second limit of CO and O₂ mixtures containing small amounts (0.25–10%) of H₂ have been used to obtain the velocity constant of the reaction These estimates of k₃₃ = 3.9 × 10⁸ and 3.5 × 10⁸ liter² mole^?2 sec^?1 (M ? H₂) at 500° and 560°C, respectively, have been combined with other estimates over the range 300°–3500°K to give k₃₃ = 3.0 × 10⁸ exp (?3000/RT) for M ? Ar; the considerable scatter in the available points does not encourage any great confidence in this expression and may be attributed at least partly to the different molecules used as M by different workers. For KCl-coated and CsCl-coated vessels at 540°C, studies of the second limit of H₂ + O₂ mixtures, to which CO has been added, have indicated that with both the surfaces, the effect of CO on the limit is masked by changes in the surface nature. In the case of CsCl, the results have enabled a lower limit of about 0.6 to be obtained for the efficiency of CO relative to H₂ in the reaction Use of a computer treatment to interpret the second limit of CO + H₂ + O₂ mixtures in aged boric-acid-coated vessels at 500°C gives a value of m_CO = 0.74 ± 0.04 together with an estimate of k₃₂ (H + CO + M″ = HCO + M″)/k₄ = 0.022 ± 0.003, which leads to k₃₂ = 2.3 × 10⁸ liter² mole^?2 sec^?1 (M ? H₂) at 500°C.     

(C2H10N2)[BPO4F2] — Structural Relations between [BPO4F2]2— and [Si2O6]4—

(C₂H₁₀N₂)[BPO₄F₂] — Strukturbeziehungen zwischen [BPO₄F₂]^2— und [Si₂O₆]^4— Colourless crystals of (C₂H₁₀N₂)[BPO₄F₂] were prepared from mixture of ethylendiamine, H₃BO₃, BF₃ · C₂H₅NH₂, H₃PO₄ and HCl under mild hydrothermal conditions (220 °C). The crystal structure was determined by single crystal methods (triclinic, P1¯ (no. 2), a = 451.85(5) pm, b = 710.20(8) pm, c = 1210.2(2) pm, α = 86.08(1)°, β = 88.52(2)°, γ = 71.74(1)°, Z = 2) and contains infinite tetrahedral zweier‐single‐chains {[BPO₄F₂]^2—} which are isoelectronic (48e^—) with the polyanions {[Si₂O₆]^4—} of the pyroxene family.