The effect of polymer architecture on the nano self-assemblies based on novel comb-shaped amphiphilic poly(allylamine)

Twelve novel poly(allylamine) (PAA)-based, comb-shaped amphiphilic polymers have been developed. Hydrophobic groups of cetyl, palmitoyl and cholesteryl were randomly grafted to PAA and quaternisation was carried out on some modified polymers. Polymers were characterised using ¹H NMR, elemental analysis and differential scanning calorimetry. All polymers formed nano self-assemblies in the aqueous solution with a positive zeta potential and were able to encapsulate a hydrophobic agent, methyl orange, in the core. The critical aggregation concentration (CAC) and the microviscosity were found to be dependent on the polymer hydrophobicity. Being the most hydrophobic polymer, cholesteryl-grafted PAA had the lowest CAC (0.02 mg mL⁻¹) and the highest microviscosity. They appeared to form dense nanoparticles and were transformed into novel nanostructures in the presence of free cholesterol. Palmitoyl-grafted polymers formed nanoparticles while cetyl-grafted polymers formed polymeric micelles. The flexibility of cetyl chains possibly resulted in the formation of multicore polymeric micelles.     

Remarkably stable amphiphilic random copolymer assemblies: A structure–property relationship study

Synthesis of a library of amphiphilic random copolymers from a single reactive pre‐polymer and their self‐assembly is reported. Post‐polymerization modifications of the parent polymer containing pendant N‐hydroxy succinimide (NHS) ester groups with various oligooxyethylene (OE) amines produce amphiphilic random copolymers with same degree of polymerization and equal extent of randomness. ¹H‐NMR and FT‐IR data indicate quantitative substitution in all cases. The critical aggregation concentration (CAC) for all the polymers is estimated to be in the range of 10^?5 M. Stability of these nano‐aggregates is studied by photoluminescence using time dependent F—rster Resonance Energy Transfer (FRET) between co‐encapsulated lipophilic dyes namely DiO and DiI in the hydrophobic pocket of the aggregates. These studies suggest remarkably high stability for all systems. However those with shorter hydrophilic pendant chains are found to be even more robust. Morphology is examined by high resolution transmission electron microscopy (HRTEM) which reveals multi‐micellar clusters and vesicles for polymers containing short and longer OE segments, respectively. Encapsulation efficacy is tested with both hydrophobic and hydrophilic guest molecules. All of them can encapsulate hydrophobic guest pyrene while a hydrophilic dye Calcein can be sequestered only in vesicle forming polymers. Lower critical solution temperature (LCST) is exhibited by only one polymer that contains the shortest OE chains. All polymers exhibit excellent cell viability as determined by MTT assay. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4932–4943     

Synthesis and aggregation of poly(valine)‐poly (ethylene glycol) block copolymers

The solubility nature of many medicines presents a challenge for successful delivery of these drugs to the body. Polymeric carriers are potentially viable as vessels for both the protection and transport of these medicinal substances. In an effort to generate polymeric materials for this desired application, A‐B‐A triblock copolymers have been synthesized with a central block composed of hydrophilic poly (ethylene glycol) (PEG) and flanking hydrophobic sequences composed of five valine units terminated with end groups of varying hydrophobicity. These copolymers were constructed by adding amino acids stepwise to the hydrophilic block using solution phase chemistry. The self‐assembly behavior of all polymers was investigated using fluorimetry with a pyrene probe. In general, copolymers with more hydrophobic end groups exhibited lower critical aggregation concentrations (CACs). Fmoc‐terminated copolymers displayed the lowest CAC of 0.032 mg/mL and demonstrated little cytotoxicity when exposed to SW620 colorectal cancer cells. Transmission electron micrographs show the presence of multiple compartments within these spherical assemblies, which may prove useful in encapsulating medicinal substances. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5381–5389, 2008     

Amphiphilic fluorous random copolymer self‐assembly for encapsulation of a fluorinated agrochemical

Amphiphilic self‐folding random copolymers exhibit different solution behaviors depending on the identity of the hydrophobic/hydrophilic units. Herein, it is demonstrated that changing the hydrophilic unit from poly(ethylene glycol) to the sugar trehalose causes increased discrepancy in the polarity difference with a fluorinated hydrophobic segment and changes the aggregation state of the polymer in water. The PEG‐fluorinated and trehalose/PEG‐fluorinated amphiphilic random copolymers were the most efficient at encapsulating a fluorinated agrochemical. The small‐molecule agrochemical exerts a strong influence on the self‐assembly of the polymers, demonstrating that fluorous interactions result in not only intramolecular self‐folding behavior but also intermolecular polymer association to form well‐defined nanoparticles. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 352–359     

萘和丹酰基修饰的扇形树枝状分子聚集体的能量转移行为

分别对1-3代聚(酰胺-胺)(PAMAM)结构的dendron分子的外端基和focal point进行了修饰,得到了外端基为萘(给体)色团、焦点(focal point)为丹酰(受体)色团的树枝状化合物Dan-ABπ-Nap(n=2,4,8).利用荧光光谱测定了不同浓度下所得一系列树枝状分子在水中的荧光强度,并计算了它...     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Studies of relationship between polymer structure and hydration environment in amphiphilic polytartaramides

The relationships between the chemical structures and hydration environment of the polymers can provide significant insight into the water‐amphiphilic polymer interactions. Here, the hydrophobicity of amphiphilic block copolymers poly(ethylene tartaramide‐b‐alkyl isocyanate) is gradually tuned by using of a series of pendant alkyl (isopropyl, n‐butyl, cyclopentyl, and cyclohexyl) groups. Dynamics of hydration probed by low‐field NMR relaxometry exhibits a heterogeneous environment of water molecules, corresponding to tightly bound water with slow re‐orientational mobility and loosely bound water with fast re‐orientational mobility. Progressively larger amounts of bound water are present in the copolymers, ongoing from pendant isopropyl, n‐butyl, cyclopentyl, and finally to cyclohexyl group. Water in the copolymer bearing the cyclohexyl group has a significantly high partial specific heat capacity. Therefore, hydrophobic interaction between the polymer and water is enhanced when the hydrophobicity of the polymer is increased, resulting in considerable hydrophobic hydration with decreased mobility of the bound water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 138–145     

Synthesis of dual pH/temperature‐responsive polymers with amino groups by living cationic polymerization

For the precision synthesis of primary amino functional polymers, cationic polymerization of a phthalimide‐containing vinyl ether monomer precursor, 2‐vinyloxyethyl phthalimide (PIVE), was examined using a base‐assisting initiating system. Living polymerization of PIVE in CH₂Cl₂ in the presence of 1,4‐dioxane as an added base yielded nearly monodispersed polymers (M_w/M_n < 1.1) and higher molecular weight polymers, which have never been obtained using other initiating systems. Furthermore, block copolymers with hydrophobic or hydrophilic groups could be prepared. The deprotection of the pendant phthalimide groups gave well‐defined pH‐responsive polymers with pendant primary amino groups. Dual‐stimuli–responsive block copolymers having a pH‐responsive polyamine segment and a thermosensitive segment self‐assembled in water in response to both pH and temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1207–1213, 2010     

An Unconventional Route to Monodisperse and Intimately Contacted Semiconducting Organic–Inorganic Nanocomposites

We developed an unconventional route to produce uniform and intimately contacted semiconducting organic–inorganic nanocomposites for potential applications in thermoelectrics. By utilizing amphiphilic star‐like PAA‐b‐PEDOT diblock copolymer as template, monodisperse PEDOT‐functionalized lead telluride (PbTe) nanoparticles were crafted via the strong coordination interaction between PAA blocks of star‐like PAA‐b‐PEDOT and the metal moieties of precursors (i.e., forming PEDOT–PbTe nanocomposites). As the inner PAA blocks are covalently connected to the outer PEDOT blocks, the PEDOT chains are intimately and permanently tethered on the PbTe nanoparticle surface, thereby affording a well‐defined PEDOT/PbTe interface, which prevents the PbTe nanoparticles from aggregation, and more importantly promotes the long‐term stability of PEDOT–PbTe nanocomposites. We envision that the template strategy is general and robust, and offers easy access to other conjugated polymer–inorganic semiconductor nanocomposites for use in a variety of applications.     

Light‐driven and aggregation‐induced emission from side‐chain azoindazole polymers

The well‐defined azoindazole‐containing homopolymer, poly(6‐{6‐[(4‐dimethylamino) phenylazo]‐indazole}‐hexyl methacrylate) (PDHMA), and amphiphilic diblock copolymer, poly({6‐[6‐(4‐dimethylamino)phenylazo]‐indazole}‐hexyl methacrylate)‐b‐poly(2‐(dimethylamino)ethylmethacrylate) (PDHMA_m‐b‐PDMAEMA_n), were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The homopolymer and amphiphilic diblock copolymer in CH₂Cl₂ exhibited intense fluorescence emission accompanied by trans–cis photoisomerization of azoindazole group under UV irradiation. The experiment results indicated that the intense fluorescence emission may be attributed to an inhibition of photoinduced electron transfer of the cis form of azoindazole. On the other hand, the intense fluorescence emission of amphiphilic diblock copolymers in water‐tetrahydrofuran mixture was observed, which increased with the volume ratio of water in the mixed solvent. The self‐aggregation behaviors of three amphiphilic diblock copolymers were examined by transmission electron microscopy, laser light scattering, and UV–vis spectra. The restriction of intramolecular rotation of the azoindazole groups in aggregates was considered as the main cause of aggregation‐induced fluorescence emission. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Multi‐stimuli‐responsive self‐immolative polymer assemblies

Self‐immolative polymers (SIPs) undergo depolymerization in response to the cleavage of stimuli‐responsive end‐caps from their termini. Some classes of SIPs, including polycarbamates, have depolymerization rates that depend on environmental factors such as solvent and pH. In previous work, hydrophobic SIPs have been incorporated into amphiphilic block copolymers and used to prepare nanoassemblies. However, stimuli‐responsive hydrophilic blocks have not previously been incorporated. In this work, we synthesized amphiphilic copolymers composed of a hydrophobic polycarbamate SIP block and a hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) block connected by a UV light‐responsive linker end‐cap. It was hypothesized that after assembly of the block copolymers into nanoparticles, chain collapse of the PDMAEMA above its lower critical solution temperature (LCST) might change the environment of the SIP block, thereby altering its depolymerization rate. Self‐assembly of the block copolymers was performed, and the depolymerization of the resulting assemblies was studied by fluorescence spectroscopy, dynamic light scattering, and NMR spectroscopy. At 20 °C, the system exhibited a selective response to the UV light. At 65 °C, above the LCST of PDMAEMA, the systems underwent more rapid depolymerization, suggesting that the increase in rate arising from the higher temperature dominated over environmental effects arising from chain collapse. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1868–1877     

Synthesis and self‐assembly of amphiphilic macrocyclic block copolymer topologies

We demonstrated the synthesis of miktoarm star block copolymers of AB, AB₂, and A₂B, in which block A consisted of linear poly(tert‐butyl acrylate) (P^tBA) and block B consisted of cyclic polystyrene. These structures were produced using the atom transfer radical polymerization to make telechelic polymers that, after modification, were further coupled together by copper‐catalyzed “click” reactions with high coupling efficiency. Deprotection of P^tBA to poly(acrylic acid) (PAA) afforded amphiphilic miktoarm structures that when micellized in water gave vesicle morphologies when the block length of PAA was 21 units. Increasing the PAA block length to 46 units produced spherical core‐shell micelles. AB₂ miktoarm stars packed more densely into the core compared to its linear counterpart (i.e., a four times greater aggregation number with approximately the same hydrodynamic diameter), resulting in the PAA arms being more compressed in the corona and extending into the water phase beyond its normal Gaussian chain conformation. These results show that the cyclic structure attached to an amphiphilic block has a significant influence on increasing the aggregation number through a greater packing density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Amphiphilic Peptide–Polymer Conjugates with Side‐Conjugation

Polymers conjugated to the exterior of a protein mediate its interactions with surroundings, enhance its processability and can be used to direct its macroscopic assemblies. Most studies to date have focused on peptide–polymer conjugates based on hydrophilic polymers. Engineering amphiphilicity into protein motifs by covalently linking hydrophobic polymers has the potential to interface peptides and proteins with synthetic polymers, organic solvents, and lipids to fabricate functional hybrid materials. Here, we synthesized amphiphilic peptide–polymer conjugates in which a hydrophobic polymer is conjugated to the exterior of a heme‐binding four‐helix bundle and systematically investigated the effects of the hydrophobicity of the conjugated polymer on the peptide structure and the integrity of the heme‐binding pocket. In aqueous solution with surfactants present, the side‐conjugated hydrophobic polymers unfold peptides and may induce an α‐helix to β‐sheet conformational transition. These effects decrease as the polymer becomes less hydrophobic and directly correlate with the polymer hydrophobicity. Upon adding organic solvent to solubilize the hydrophobic polymers, however, the deleterious effects of hydrophobic polymers on the peptide structures can be eliminated. Present studies demonstrate that protein structure is sensitive to the local environment. It is feasible to dissolve amphiphilic peptide–polymer conjugates in organic solvents to enhance their solution processability while maintaining the protein structures.

     

Diazonium salts for surface‐confined visible light radical photopolymerization

The surface chemistry of aryl diazonium salts has progressed at a remarkable pace in the last two decades, and opened many avenues in materials science. These compounds are excellent coupling agents for polymers to surfaces via several surface‐confined polymerization methods. For the first time, we demonstrate that diazonium salts are efficient for surface initiating radical photopolymerization in the visible light of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) taken as model monomers. To do so, 4‐(dimethylamino)benzenediazonium salt was electroreduced on gold plates or flexible ITO sheets to provide 4‐(dimethylamino)phenyl (DMA) hydrogen donor layers; while excited state camphorquinone acted as the free hydrogen abstractor. In the same way, we co‐polymerized HEMA and MMA with ethylene glycol dimethacrylate in order to obtain crosslinked polymer grafts. We demonstrate by XPS that gold was efficiently screened by the polymer layers and that the wettability of the surfaces accounts for the hydrophilic or hydrophobic characters of the tethered polymers. Homo‐ and crosslinked PMMA grafts were found to resist removal by the paint stripper methyl ethyl ketone. The grafted DMA/camphorquinone system operating in the visible light holds great promises in terms of adhesion of in situ designed continuous or patterned polymer coatings on various substrates. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3506–3515     

Modification of polysulfones by click chemistry: Amphiphilic graft copolymers and their protein adsorption and cell adhesion properties

Well‐defined amphiphilic graft copolymer with hydrophobic polysulfone (PSU) backbone and hydrophilic poly(acrylic acid) (PAA) side chains were synthesized and characterized. For this purpose, commercially available PSU was converted to azido‐functionalized polymer (PSU‐N₃) by successive chloromethylation and azidation processes. Independently, poly(tert‐butyl acrylate) (PtBA) with an alkyne‐end‐group is obtained by using suitable initiator in atom transfer radical polymerization (ATRP). Then, this polymer was successfully grafted onto PSU‐N₃ by click chemistry to yield polysulfone‐graft‐poly(tert‐butyl acrylate), (PSU‐g‐PtBA). Finally, amphiphilic polysulfone‐graft‐poly(acrylic acid), (PSU‐g‐PAA), membranes were obtained by hydrolyzing precursor the PSU‐g‐PtBA membranes in trifluoroacetic acid. The final polymer and intermediates at various stages were characterized by ¹H NMR, FTIR, GPC, and SEM analyses. Protein adsorption and eukaryotic and prokaryotic cell adhesion on PSU‐g‐PAA were studied and compared to those of PSU‐g‐PtBA and unmodified PSU. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Thermosensitive behavior of amphiphilic triblock copolymers based on poly(acrylic acid) and poly(propylene oxide)

Self‐association in aqueous solution of amphiphilic poly(acrylic acid)‐b‐poly(propylene oxide)‐b‐poly(acrylic acid) (PAA‐b‐PPO‐b‐PAA) copolymers having various outer PAA block lengths are presented. These copolymers show two thermosensitive behaviors. The first one, due to hydrogen bonds between PAA and PPO resulting in large aggregates, was observed by visible spectroscopy. The second one, due to the association of PPO middle block into aggregates, was evidenced by dynamic light scattering and pyrene fluorescence. These critical temperatures both depend on the ionization and the length of PAA blocks. The characterization of the aggregates above the critical aggregation concentration by fluorescence quenching experiments showed a very low aggregation number corresponding to dimers or trimers association depending on the conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1507–1514     

Porous silica particles grafted with an amphiphilic side‐chain polymer as a stationary phase in reversed‐phase high‐performance liquid chromatography

The amphiphilic polymer‐grafted silica was newly prepared as a stationary phase in high‐performance liquid chromatography. Poly(4‐vinylpyridine) with a trimethoxysilyl group at one end was grafted onto porous silica particles and the pyridyl side chains were quaternized with 1‐bromooctadecane. The obtained poly(octadecylpyridinium)‐grafted silica was characterized by elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy and Brunauer–Emmett–Teller analysis. The degree of quaternization of the pyridyl groups on the obtained stationary phase was estimated to be 70%. The selective retention behaviors of polycyclic aromatic hydrocarbons including some positional isomers were investigated using poly(octadecylpyridinium)‐grafted silica as an amphiphilic polymer stationary phase in high‐performance liquid chromatography and results were compared with commercially available polymeric octadecylated silica and phenyl‐bonded silica columns. The results indicate that the selectivity toward polycyclic aromatic hydrocarbons exhibited by the amphiphilic polymer stationary phase is higher than the corresponding selectivity exhibited by a conventional phenyl‐bonded silica column. However, compared with the polymeric octadecylated silica phase, the new stationary phase presents similar retention behavior for polycyclic aromatic hydrocarbons but different retention behavior particularly for positional isomers of disubstituted benzenes as the aggregation structure of amphiphilic polymers on the surface of silica substrate has been altered during mobile phase variation.     

Introduction of Quantum Dots into PNIPAM microspheres by precipitation polymerization above LCST

Amphiphilic polymers having different polymerizable functional groups were synthesised and investigated as coatings for semiconductor nanoparticles (Quantum Dots, QDs). QDs coated with hydrophobic ligands were successfully transferred into water using these polymers and the assemblies were co-polymerized with N-isopropylacrylamide (NIPAM) by a precipitation polymerization method. In the resulting hybrid microspheres, QDs were uniformly distributed within the PNIPAM matrix. The influence of different polymerizable groups and counter ions of the amphiphilic polymer on the copolymerization process were investigated.     

Research on association between multi-sticker amphiphilic polymer and water-soluble β-cyclodextrin polymer

The host cyclodextrin polymer-P(AM/A-β-CD/NaA) is prepared by redox free-radical copolymerization. Additionally, the multi-sticker amphiphilic polymer-P(AM/BHAM/NaA) as a guest polymer is synthesized using micellar polymerization. The copolymer structures are characterized by ¹H NMR. Subsequently, all the polymers and inclusion complexes are evaluated in terms of apparent viscosity, optical absorption spectra and rheological property. The results indicate that the inclusion association between the cyclodextrin group (CD) and multi-sticker hydrophobic monomer (BHAM) is in accordance with ternary interaction (CD/BHAM?=?2:1). Because of the inclusion association between the host and guest polymers, the solution of inclusion complex has much higher viscoelasticity even under the low amphiphilic polymer concentration. When the molar ratio of CD to BHAM is 1:1, the critical aggregation concentration (CAC) of the inclusion complex solution still remains. Furthermore, above the CAC, two types of associations, inclusion association and inter-molecular hydrophobic association, can occur in the complex solution and these interactions were also verified by fluorescence spectroscopy and atomic force microscopy (AFM). In this paper, the inclusion rule of cyclodextrin polymer with the multi-sticker amphiphilic polymer is discussed, and the rule of the enhanced solution viscosity is further explored.     

Synthesis and self‐assembly of amphiphilic dendronized conjugated polymers

Two kinds of amphiphilic dendronized conjugated polymers, polyfluorene (PF) and poly(binaphthyl‐alt‐fluorene) (PBF), were synthesized by Suzuki polycondensation of hydrophobic macromonomers with two nonpolar octyloxy chains and hydrophilic macromonomers with two polar oligo(ethylene oxide) chains. In these polymers, PF possesses a linear rod‐like backbone structure, and PBF adopts a folded rigid backbone structure. The different configurations in the conjugated main chains result in different supramolecular self‐assembly morphologies. The optical and thermal properties of PF and PBF were also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 574–584, 2008