Enantiospecific assay for mammalian carbonyl reductase by liquid chromatography with fluorescence detection

A fluorogenic substrate with an unsymmetrical carbonyl for the sensitive assay of mammalian carbonyl reductase activities, 4-(6-methoxy-2-benzoxazolyl)acetophenone (I), has been prepared. The fluorescence quantum yield of I in acetonitrile is 0.12 at the emission maximum of 448 nm. The corresponding racemic alcohol produced by the chemical reduction of I, (+/-)-sec.-[4-(6-methoxy-2-benzoxazolyl)]phenethyl alcohol (II), exhibits ca. three- to fourteen-fold higher fluorescence at a shorter wavelength emission maximum of 370 nm in conventional solvents. Each enantiomer of II is sufficiently resolved on a chiral cellulose high-performance liquid chromatographic column without derivatization and quantified with high reproducibility. The detection limit for II is 20 fmol per injection at a signal-to-noise ratio of 3. The validity and applicability of I are evaluated with cytosols of mammalian tissues. The optimal pH for metabolic reduction of I in rabbit liver cytosol preparations is 6.2 in the presence of NADPH. The metabolism is proved to be highly stereoselective. The resulting alcohol produced by mammalian tissue preparations, except rabbit kidney, is predominantly of the S-(-)-configuration.     

Direct reductive amination of aldehydes using lithium-arene(cat.) as reducing system. A simple one-pot procedure for the synthesis of secondary amines

A simple one-pot procedure for the direct reductive amination of aldehydes using lithium powder and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB) or a polymer supported naphthalene as reducing system is described. The direct reductive amination of a variety of aldehydes with primary amines was achieved simply by adding a mixture of the corresponding carbonyl compound and the amine, over a solution of the lithium arenide in THF at room temperature. For most of the substrates tested the main reaction products were the secondary amines along with variable amounts of the corresponding alcohol and/or imine products. Theoretical DFT calculations have been applied in order to explain the differences in reactivity observed for aromatic substrates.     

Synthesis of poly(1‐oxodimethylene) via oxidation of poly(vinyl alcohol) with a hydrogen peroxide/hydrobromic acid system and metal complexation behavior of poly(1‐oxodimethylene)

Poly(1‐oxodimethylene) was synthesized via oxidation of poly(vinyl alcohol) with a hydrogen peroxide/hydrobromic acid system. The content of the carbonyl groups in poly(1‐oxodimethylene) depended on the amount of water added, and lower amounts of water were suitable for efficient oxidation due to higher acidity of the reaction system. The highest content of carbonyl groups was estimated to be above 88% by the titration with hydrazine that reacted with the carbonyl groups in poly(1‐oxodimethylene). The obtained poly(1‐oxodimethylene) complexed with Cu and Ni ions under basic conditions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2598–2605     

Application of a unique selective PLOT capillary column for the analysis of oxygenated compounds in ambient air

Summary A new PLOT column (CP-LOWOX) designed specifically for the analysis of oxygenated compounds has been used for the gas chromatographic determination of semi-volatile carbonyl compounds. The separation behavior of the new column was investigated by comparing it with the widely used non-polar polydimethylsiloxane and polar poly(ethylene glycol) columns. The CP-LOWOX column has unique selectivity for aldehydes and ketones enabling a selective separation of these analytes from predominating hydrocarbon matrices. Application of the CP-LOWOX column for the analysis of polar compounds in ambient air is demonstrated. Sampling was performed by adsorptive enrichment coupled with thermal desorption. The suitability of Tenax TA and a multi-bed adsorbent trap Carbotrap C and Carbotrap) was tested for the sampling of semivolatile carbonyl compounds. Presented at Balaton Symposium on High Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Tandem oxidation-Wittig-Wittig sequences for the preparation of functionalised dienoates

A range of functionalised dienes and trienes have been prepared by one-pot processes in which alcohol oxidation is accompanied by in situ Wittig homologation using Trippett’s reagent [(triphenylphosphoranylidene)acetaldehyde] followed by addition of a second stabilised phosphorane. This procedure has been applied to α-hydroxy carbonyl compounds and activated benzylic alcohols.     

Reaction gas chromatography/mass spectrometry. 2—the use of catalytic on-line dehydrogenation for the investigation of alcohols by gas chromatography/mass spectrometry

A method for structure determination of aliphatic alcohols within mixtures is described. It involves the use of a vapour phase dehydrogenation micro-reactor (Cu, 300°C) located between the chromatographic column and the mass spectrometer or between the injection port and the column. Since primary and secondary alcohols are converted into corresponding carbonyl compounds, they can be readily differentiated from tertiary alcohols and dialkyl ethers. An examination of the mass spectra of alcohols and carbonyl compounds permits the determination of molecular mass, the location of hydroxyl group and the determination of branching at the β-carbon atom.     

Relationship between reduction of ceric ion with poly(vinyl alcohol) and graft copolymerization

Various poly(vinyl alcohol) samples were preliminarily subjected to oxidation treatment with sodium hypochlorite, and the reduction of ceric ion and subsequently initiation in the graft copolymerization in the system containing methyl methacrylate were investigated. The reduction behavior of ceric ion could be subdivided into three parts, each of different reaction rate. In the initial stage of the reaction, there was observed rapid cleavage of the backbone chain of poly(vinyl alcohol) with ceric salts. The amount A of cleavage was proportional to the amount of ceric ion reduced at the initial fastest rate for various samples of different extents of oxidation; cleavage of 1 mole required ca. 10 moles of reduction of ceric ion. Higher carbonyl contents of the sample caused increased A. Graft polymerization was carried out in the same system with the addition of the monomer. The amounts of grafted chains produced were determined, and approximately one mole of grafted chains was obtained for per mole of cleavage. The copolymer is concluded to be blocklike in structure. The contribution of the carbonyl groups in poly(vinyl alcohol) sample to the initiation of the polymerization should be emphasized.     

Oxidation of alcohols to carbonyl compounds with CrO3.SiO2 in supercritical carbon dioxide

Supercritical carbon dioxide (scCO2) is an effective reaction medium to perform the oxidation of primary and secondary aliphatic alcohols to the corresponding carbonyl compounds with chromium trioxide supported on silica. These reactions were performed by flowing a solution of the alcohol in scCO2 through a column containing the supported reagent and recovering the product by depressurization. This method avoids the use of organic solvents and the contamination of the products with chromium species.     

Observation of 1,3-diketones formation in the reaction of bulky acyl chlorides with methyllithium

The formation of 1,3-diketones was observed in the reactions of bulky acyl chlorides with methyllithium. The reaction products depend on the steric hindrance around the carbonyl group of the acyl chloride and the electronic effect of the group(s) linked to the carbonyl. When the steric hindrance around the carbonyl group of the acyl chloride is big enough, the 1,3-diketone is the only product. In the case of the moderate hindrance around the carbonyl group of the acyl chloride, a moderate yield of 1,3-diketone is obtained and some tertiary alcohol is generated. When there is no steric hindrance around the carbonyl group of the acyl chloride, the tertiary alcohol is the only product. When the steric hindrance around the carbonyl group is moderate and an electron-donating group is connected to the carbonyl of the acyl chloride, all three products--ketone, 1,3-diketone and tertiary alcohol--can be isolated from the reaction mixture after long reaction times.     

Dimethyl sulfoxide-catalytic molybdenum peroxide: A new system for the facile oxidation of alcohols

In the dimethyl sulfoxide (DMSO)-metal oxide oxidation of alcohol to carbonyl compound, molybdenum oxides were the only useful catalytic reagents, and various alcohols were oxidized to the corresponding carbonyl compounds in high yields.     

Three-component coupling sequence for the regiospecific synthesis of substituted pyridines

A de novo synthesis of substituted pyridines is described that proceeds through nucleophilic addition of a dithiane anion to an α,β-unsaturated carbonyl followed by metallacycle-mediated union of the resulting allylic alcohol with preformed trimethylsilane-imines (generated in situ by the low-temperature reaction of lithium hexamethyldisilazide with an aldehyde) and Ag(I)- or Hg(II)-mediated ring closure. The process is useful for the convergent assembly of di- through penta-substituted pyridines with complete regiochemical control.     

Ruthenium-catalyzed C-C bond forming transfer hydrogenation: carbonyl allylation from the alcohol or aldehyde oxidation level employing acyclic 1,3-dienes as surrogates to preformed allyl metal reagents

Under the conditions of ruthenium-catalyzed transfer hydrogenation, commercially available acyclic 1,3-dienes, butadiene, isoprene, and 2,3-dimethylbutadiene, couple to benzylic alcohols 1a-6a to furnish products of carbonyl crotylation 1b-6b, carbonyl isoprenylation 1c-6c, and carbonyl reverse 2-methyl prenylation 1d-6d. Under related transfer hydrogenation conditions employing isopropanol as terminal reductant, isoprene couples to aldehydes 7a-9a to furnish identical products of carbonyl isoprenylation 1c-3c. Thus, carbonyl allylation is achieved from the alcohol or the aldehyde oxidation level in the absence of preformed allyl metal reagents. Coupling to aliphatic alcohols (isoprene to 1-nonanol, 65% isolated yield) and allylic alcohols (isoprene to geraniol, 75% isolated yield) also is demonstrated. Isotopic labeling studies corroborate a mechanism involving hydrogen donation from the reactant alcohol or sacrificial alcohol (i-PrOH).     

A new catalytic method for the synthesis of selectively substituted biphenyls containing an oxoalkyl chain

A novel reaction sequence leading to the synthesis of substituted biphenyls containing a carbonyl group in an aliphatic chain has been achieved in one-pot reaction starting from iodoarenes and allylic alcohols under the catalytic action of palladium and norbornene. The latter is temporarily incorporated into a palladacycle, which directs the reaction towards the selective formation of an arylaryl bond. Norbornene spontaneously deinserts to allow the biphenylylpalladium bond thus formed to react in its turn with the allylic alcohol.     

A novel catalytic method for the regeneration of carbonyl compounds from oximes using aluminum nitrate and NaBr as catalyst

<正>A wide variety of aldoximes and ketoximes were regenerated to corresponding carbonyl compounds with Al(NO_3)_3·9H_2O in presence of catalytic amounts of NaBr in CH_2Cl_2 at room temperature.     

Tandem Pd/Au‐Catalyzed Route to α‐Sulfenylated Carbonyl Compounds from Terminal Propargylic Alcohols and Thiols

An efficient and highly atom‐economical tandem Pd/Au‐catalyzed route to α‐sulfenylated carbonyl compounds from terminal propargylic alcohols and thiols has been developed. This one‐step procedure has a wide substrate scope with respect to substituents at the α‐position of the alcohol. Both aromatic and aliphatic thiols generated the α‐sulfenylated carbonyl products in good to excellent yields. A mechanism is proposed in which the reaction proceeds through a Pd‐catalyzed regioselective hydrothiolation at the terminal triple bond of the propargyl alcohol followed by an Au‐catalyzed 1,2‐hydride migration.     

A simple and advantageous protocol for the oxidation of alcohols with O-iodoxybenzoic acid (IBX)

[reaction: see text] An efficient, user-friendly procedure for the oxidation of alcohols using IBX is described. Simply heating a solution of the alcohol in the presence of suspended IBX followed by filtration and removal of the solvent gives excellent yields of the corresponding carbonyl compounds. We illustrate this procedure with a panel of primary and secondary alcohol substrates and note that it allows recycling and reuse of the oxidant.     

Copper-catalyzed beta-Boration of alpha,beta-unsaturated carbonyl compounds: rate acceleration by alcohol additives

[reaction: see text] The efficient addition of bis(pinacolato)diboron to alpha,beta-unsaturated carbonyl compounds with a copper-diphosphine catalyst has been carried out. A dramatic rate acceleration of the reaction was realized by adding alcohol additives. With use of this procedure, a variety of alpha,beta-unsaturated carbonyl compounds including conjugated substrates at the acid oxidation level such as esters and nitriles were reacted to give to the corresponding beta-boryl carbonyl compounds in high yields.     

N-nitrosoamide-mediated N --> O nitroso transfer to alcohols with subsequent denitroxylation

Decomposition of certain N-benzyl-N-nitrosoamides is often accompanied by small amounts of benzaldehyde whose formation was postulated to arise from in situ formation and oxidation of benzyl alcohol. Incubation of excess benzyl alcohol with thermostable N-benzyl-N-nitrosoamides at ambient temperatures in inert solvents generates benzyl nitrite, N-benzyl amides, and benzaldehyde as the major products. Benzyl nitrite formation appears to be linked to N --> O nitroso transfer between the N-benzyl-N-nitrosoamides and benzyl alcohol, which is subject to the previously observed electronic and steric features of the acyl substituent although the former appears to play a much larger role than the latter. Benzaldehyde formation evidently arises from dehydronitrosation (denitroxylation) of the nitrite via O-N bond homolysis and H-abstraction from the resultant benzyloxy radical. Although trans-nitrosation occurs with methanol, 1 degree, 2 degree, and 3 degree alcohols, the reaction is evidently subject to steric effects at both the alpha and beta carbons of the alcohol. Additionally, carbonyl formation only occurs with 2 degrees alcohols and those that can derive resonance-stabilized carbonyls.     

Enantioswitchable catalysts for the asymmetric transfer hydrogenation of aryl alkyl ketones

A subtle change in the ligand structure, replacing the carbonyl oxygen with sulfur in simple alpha-amino acid amides, resulted in a dramatic activity and selectivity improvement in the rhodium- or ruthenium-catalyzed reduction of ketones under hydrogen transfer conditions. In addition, in most cases, a switch of the product's absolute configuration was observed on going from amides to the corresponding thioamides. Under optimized conditions, we obtained the secondary alcohol products in high yield and enantioselectivity (up to 97% ee) using only 0.25 mol % catalyst loading. [structure: see text]     

High-performance affinity chromatography system for the rapid, efficient assay of glycated albumin.

A high-performance affinity chromatographic system was constructed and shown to permit highly reproducible, rapid, automatic assays of serum glycated albumin (GA) by separation of albumin (Alb) on an anion-exchange column (Asahipak ES-502N) packed with a vinyl alcohol copolymer bearing diethylamino groups and consecutive separation of GA on a column packed with a vinyl alcohol copolymer bearing boronate groups. The first column selectively retained Alb free of other serum proteins and permitted at least a 95% recovery of sample Alb. The purity of the Alb peak was confirmed by two-dimensional electrophoresis. Chromatographic analyses of human serum Alb incubated with glucose on the second column showed that the peak area for GA increased in accordance with the incubation time and suggested selective adsorption of GA on the second column. Optimization of the conditions for the two-column system reduced the analysis time to 10 min. Analyses of human sera with the present system showed GA to be 16.1 +/- 1.1% (mean +/- S.D.) of total Alb in non-diabetic children and 39.9 +/- 9.1% (mean +/- S.D.) in diabetic children (0-17 years old).