19F NMR transverse and longitudinal relaxation filter experiments for screening: a theoretical and experimental analysis

Ligand‐based ¹⁹F NMR screening represents an efficient approach for performing binding assays. The high sensitivity of the methodology to receptor binding allows the detection of weak affinity ligands. The observable NMR parameters that are typically used are the ¹⁹F transverse relaxation rate and isotropic chemical shift. However, there are few cases where the ¹⁹F longitudinal relaxation rate should also be used. A theoretical and experimental analysis of the ¹⁹F NMR transverse and longitudinal relaxation rates at different magnetic fields is presented along with proposed methods for improving the sensitivity and dynamic range of these experiments applied to fragment‐based screening. Copyright © 2016 John Wiley & Sons, Ltd.     

19F NMR isotropic chemical shift for efficient screening of fluorinated fragments which are racemates and/or display multiple conformers

Fluorine ligand‐based NMR spectroscopy is now an established method for performing binding screening against a macromolecular target. Typically, the transverse relaxation rate of the fluorine signals is monitored in the absence and presence of the target. However, useful structural information can sometimes be obtained from the analysis of the fluorine isotropic chemical shift. This is particularly relevant for molecules that are racemates and/or display multiple conformers. The large difference in fluorine isotropic chemical shift between free and bound state deriving mainly from the breaking and/or making of intramolecular and/or intermolecular hydrogen bonds allows the detection of very weak affinity ligands. According to our experimental results, racemates should always be included in the generation of the fluorinated fragment libraries. The selection or the availability of only one of the enantiomers for the fluorinated screening library could result in missing relevant chemical scaffold motifs.     

Mono‐ and difluorinated 1,1,2,2,9,9,10,10‐octafluoro[2.2]paracyclophanes (AF4s)—A 1H and 19F NMR study

Complete assignment of the ¹H and ¹⁹F chemical shifts in 4‐fluoro‐AF4 (1) were based on the nOes seen in its ¹⁹F‐¹H HOESY spectrum. This allowed for identification of features which can further be applied to the assignment of the regiochemistry of substituted perfluoroparacyclophanes (PCPs) and AF4s: (i) an aromatic fluorine couples with the two fluorines in the closest bridge that are syn to it, with constants of ca. 20 Hz; (ii) an aromatic fluorine couples with the bridge fluorine five bonds away that is anti to it in the same paraphenylene moiety, with a constant of ca. 3.5 Hz; (iii) the geminal coupling of the bridge fluorines is 246 Hz if they have an ortho fluorine and 238 Hz if they do not; (iv) a bridge fluorine couples with those aromatic protons in the same paraphenylene moiety that are four or five bonds away and anti. These features have been used to assign the regiochemistry of the pseudo‐ortho, pseudo‐meta and pseudo‐para‐difluoro AF4s 2–4. It has also been demonstrated that SCS for the bridge fluorines can be used as well for this assignment. Copyright © 2009 John Wiley & Sons, Ltd.     

The first automated 470.59 MHz 19F NMR‐controlled titration: dissociation constants and ion‐specific chemical shifts of 2‐amino‐4‐fluoro 2‐methylpent‐4‐enoic acid

2‐Amino‐4‐fluoro‐2‐methylpent‐4‐enoic acid, obtained as a 1 : 1 salt with trifluoro‐acetic acid, was characterized by ¹H and ¹⁹F high‐resolution NMR spectroscopy. High‐precision potentiometry led to the dissociation constants pK = 1.879 and pK = 9.054. The first automated 470.59 MHz ¹⁹F NMR‐controlled titration yielded the dynamic chemical shift 〈δ_F〉 as a function of pcH or τ and the ion‐specific chemical shifts: δ_F(H₂L⁺) = ?94.81 ppm, δ_F(HL) = ?94.21 ppm, δ_F(L^?) = ?92.45 ppm. The deprotonation gradients were found to be Δ₁ = ?0.60 ppm and Δ₂ = ?1.76 ppm. Copyright © 2002 John Wiley & Sons, Ltd.     

Structural properties of perfluorinated linear alkanes: a 19F and 13C NMR study of perfluorononane

Liquid perfluorocarbons exhibit unique physical-chemical characteristics such as extraordinary stability, combined hydrophobia and lipophobia, low surface tension and a capacity to carry large quantities of gas. They have found widespread use in industry, medicine and biology even though the molecular origin of these properties is not fully understood. The objective of the present work was to elucidate the physical behavior of perfluorinated linear alkanes by investigating their intramolecular electronic environment using 13C and 19F NMR techniques in combination with theoretical calculations of molecular orbitals. Particular advantage was taken of 19F-19F through-space couplings, which led us to propose a molecular model in which delocalized p-electrons of the fluorines cover the entire surface of the molecule in two pairs of intertwined helices. Experimental data are presented for n-perfluorononane and supported by corresponding measurements with shorter and longer perfluorinated alkanes.     

Computation and analysis of 19F substituent chemical shifts of some bridgehead‐substituted polycyclic alkyl fluorides

The ¹⁹F NMR shieldings for several remotely substituted rigid polycyclic alkyl fluorides with common sets of substituents covering a wide range of electronic effects were calculated using the DFT‐GIAO theoretical model. The level of theory, B3LYP/6–311+G(2d,p), was chosen based on trial calculations which gave good agreement with experimental values where known. The optimized geometries were used to obtain various molecular parameters (fluorine natural charges, electron occupancies on fluorine of lone pairs and of the C? F bond, and hybridization states) by means of natural bond orbital (NBO) analysis which could help in understanding electronic transmission mechanisms underlying ¹⁹F substituent chemical shifts (SCS) in these systems. Linear regression analysis was employed to explore the relationship between the calculated ¹⁹F SCS and polar substituent constants and also the NBO derived molecular parameters. The ¹⁹F SCS are best described by an electronegativity parameter. The most pertinent molecular parameters appear to be the occupation number of the NBO p‐type fluorine lone pair and the occupation number of the C? F antibonding orbital. This trend suggests that in these types of rigid saturated systems hyperconjugative interactions play a key role in determining the ¹⁹F SCS. Electrostatic field effects appear to be relatively unimportant. Copyright © 2003 John Wiley & Sons, Ltd.     

Magnetism,optical absorbance,and 19F NMR spectra of nafion films with self‐assembling paramagnetic networks

Magnetization, optical absorbance, and ¹⁹F NMR spectra of Nafion transparent films as received and doped with Mn²⁺, Co²⁺, Fe²⁺, and Fe³⁺ ions with and without treatment in 1H‐1,2,4‐triazole (trz) have been studied. Doping of Nafion with Fe²⁺ and Co²⁺ and their bridging to nitrogen of triazole yields a hybrid self‐assembling paramagnetic system that exhibits interesting magnetic and optical properties. These include spin crossover phenomena between high‐spin (HS) and low‐spin (LS) states in Nafion‐Fe²⁺‐trz and Nafion‐Co²⁺‐trz accompanied by thermochromic effects in the visible range induced by temperature. A large shift of the magnetization curve induced by a magnetic field in the vicinity of the HS ? LS, ～220 K, observed for Nafion‐Fe²⁺‐trz has a rate of ～6 K/kOe, which is about three orders of magnitude larger than that in bulk spin crossover Fe²⁺ materials. Selective response of ¹⁹F NMR signals on doping with paramagnetic ions demonstrates that NMR can be used as spatially resolved method to study Nafion film with paramagnetic network. Both chemical shift and width of ¹⁹F NMR signals show that SO groups of Nafion, Fe or Co ions, and nitrogen of triazole are bonded whereas they form a spin crossover system. Based on a model of nanosize cylinders proposed for Nafion [K. Schmidt‐Rohr and Q. Chen, Nat Mater (2008), 75], we suggest that paramagnetic ions are located inside these cylinders, forming self‐assembling magnetically and optically active nanoscale networks. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 129–138, 2012     

Fluorinated copolymers and terpolymers based on vinylidene fluoride and bearing sulfonic acid side‐group

The radical co‐ and terpolymerization of perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride (PFSVE) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF or VF₂), hexafluoropropene (HFP), chlorotrifluoroethylene (CTFE), and bromotrifluoroethylene (BrTFE) is presented. Although PFSVE could not homopolymerize under radical initiation, it could be copolymerized in solution under a radical initiator with VDF, while its copolymerizations with HFP or CTFE led to oligomers in low yields. The terpolymerizations of PFSVE with VDF and HFP, with VDF and CTFE, or with VDF and BrTFE also led to original fluorinated terpolymers bearing sulfonyl fluoride side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature and the amount of the radical initiators, of the nature of solvents (fluorinated or nonhalogenated), and of the initial amounts of fluorinated comonomers. The different mol % contents of comonomers in the co‐ and terpolymers were assessed by ¹⁹F NMR spectroscopy. A wide range of co‐ and terpolymers containing mol % of PFSVE functional monomer ranging from 10 to 70% was produced. The kinetics of copolymerization of VDF with PFSVE enabled to assess the reactivity ratios of both comonomers: r_VDF = 0.57 ± 0.15 and r_PFSVE = 0.07 ± 0.04 at 120 °C. The thermal and physicochemical properties were also studied. Moreover, the glass transition temperatures (T_gs) of poly(VDF‐co‐PFSVE) copolymers containing different amounts of VDF and PFSVE were determined and the theoretical T_g of poly(PFSVE) homopolymer was deduced. Then, the hydrolysis of the ? SO₂F into ? SO₃H function was investigated and enabled the synthesis of fluorinated copolymers bearing sulfonic acid functions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1814–1834, 2007     

ChemInform Abstract: Na2MoO2‐δF4+δ — A Perovskite with a Unique Combination of Atomic Orderings and Octahedral Tilts.

The title compound (δ ≈ 0.08) is hydrothermally synthesized from a mixture of NaF, MoO₃, MoO₂, guanidinium carbonate, and HF in H₂O (autoclave, 160 °C, 3 d).     

Random and sequential radical cotelomerizations of 3,3,3‐trifluoropropene (H2CCHCF3) with vinylidene fluoride (F2CCH2)

The synthesis of original cotelomers based on 3,3,3‐trifluoropropene (TFP) and vinylidene fluoride (VDF) with a general formula: R_F‐[CH₂? CF₂]_n? [CH₂? CH(CF₃)]_m? I (where n = 1–63, m = 2–640, and R_F = (CF₃)₂CF) was achieved by sequential and random cotelomerizations in the presence of R_FI. The radical cotelomerizations were initiated by thermal decomposition of different peroxide and persulfate initiators either in bulk, in solution (in the presence of acetonitrile or 1,1,1,3,3‐pentafluorobutane as the solvents), and in aqueous process (emulsion). Different adducts were obtained in good yield (50–70 wt %) with a relative proportion of each adduct depending on (i) the R₀ = [R_FI]₀/([TFP]₀+[VDF]₀) initial molar ratio, (ii) the reaction temperature, and (iii) C₀ = [In]₀/([TFP]₀+[VDF]₀). Random cotelomerization gave higher yields than those obtained from the sequential cotelomerization. When the concentration of the chain transfer agent increased, the molecular weights of the resulting poly(VDF‐co‐TFP) cotelomers decreased and showed that the R₀ ratio targeted the molecular weights (～700–66,000 g mol^?1). Some of the obtained molecular weights were exceptionally high for a (co)telomerization. The kinetics of the radical cotelomerization of VDF and TFP led to the determination of the reactivity ratios of both comonomers (r_VDF = 0.28 ± 0.07 and r_TFP = 2.35 ± 0.26 at 75 °C). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3964–3981, 2009     

Synthesis of functional polymers—Vinylidene fluoride based fluorinated copolymers and terpolymers bearing bromoaromatic side‐group

The radical co‐ and terpolymerization of 4‐[(α,β,β‐trifluorovinyl)oxy]bromo benzene (TFVOBB) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF, or VF₂), hexafluoropropene (HFP), perfluoromethyl vinyl ether (PMVE), and chlorotrifluroroethylene (CTFE) is presented. Although TFVOBB could be thermocyclodimerized, it could not homopolymerize under radical initiation. TFVOBB could be copolymerized in solution under a radical initiator with VDF or CTFE comonomers, while its copolymerization with HFP or PMVE were unsuccessful. The terpolymerization of TFVOBB with VDF and HFP, or VDF and PMVE, or VDF and CTFE also led to original fluorinated terpolymers bearing bromoaromatic side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature of the radical initiators, and of the nature of solvents (fluorinated or nonhalogenated). Various monomer concentrations in the co‐ and terpolymers were assessed by ¹⁹F and ¹H‐NMR spectroscopy. The thermal and physico chemical properties were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5077–5097, 2004     

Synthesis of the first nanomagnetic particles with semicarbazide‐based acidic ionic liquid tag: an efficient catalyst for the synthesis of 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives under mild and green conditions

Semicarbazide functionalized with chlorosulfonic acid on the surface of silica‐coated magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl}, as a novel magnetic Brønsted acid catalyst according to the aims of green chemistry was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning electron, transmission electron and atomic force microscopies and thermogravimetric analysis. The capability and excellent activity of this nanoparticle catalyst were exhibited in the synthesis of two series of compounds with important biological activities, namely 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives, under mild, green and solvent‐free conditions. To the best of our knowledge, this is the first study of the synthesis and application of {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl} as Brønsted acid solid magnetic nanoparticles. Consequently the present study can open up a novel and promising intuition in the sequence of logical design, synthesis and applications of task‐specific Brønsted acid magnetic nanoparticle catalyst with favourable properties as a full‐fledged efficient material for sustainable approaches. Copyright © 2016 John Wiley & Sons, Ltd.