Water‐Soluble Carbon Nanotubes by Redox Radical Polymerization

Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.

     

Polyelectrolyte‐Assisted Noncovalent Functionalization of Carbon Nanotubes with Ordered Self‐Assemblies of a Water‐Soluble Porphyrin

The self‐assembly and induced supramolecular chirality of meso‐tetrakis(4‐sulfonatophenyl)porphyrin (TSPP) on both single‐wall (SWCNT) and multiwall carbon nanotubes (MWCNT) are investigated. Under mild pH conditions (pH 3), TSPP forms aggregates when CNTs are dispersed in an aqueous solution containing positively charged polyelectrolytes such as poly‐L ‐lysine (PLL) or poly(allylamine hydrochloride) (PAH). Evidence for the geometry of the porphyrin aggregates is obtained from absorption spectra, whereby the fingerprints of J‐ and H‐aggregates are clearly seen only in the presence of smaller‐diameter nanotubes. J‐aggregates are better stabilized with PLL, whereas in the presence of PAH mainly H‐aggregates prevail. Excited‐state interactions within these nanohybrids are studied by steady‐state and time‐resolved fluorescence. The porphyrin emission intensity in the nanohybrid solution is significantly quenched compared to that of TSPP alone, and this implies strong electronic interaction between CNTs and porphyrin molecules. Fluorescence lifetime imaging microscopy (FLIM) further supports that porphyrin arrays are associated with the MWCNT sidewalls wrapped in PLL. In the case of the SWCNT hybrid, spherical structures associated with longer fluorescence lifetime appeared after one week, indicative of H‐aggregates of TSPP. The latter are the result of π–π stacking of porphyrin units on neighboring nanotubes facilitated by the strong tendency of these nanotubes to interact with each other. These results highlight the importance of optimum dimensions and surface‐area architectures of CNTs in the control/stability of the porphyrin aggregates with promising properties for light harvesting.     

Supramolecular Macrostructures of UPy‐Functionalized Carbon Nanotubes

Carbon nanotubes (CNTs) are considered excellent materials for the construction of flexible displays due to their nanoscale dimensions and unique physical and chemical properties. By using the recognition properties of 2‐ureido‐4[1H]pyrimidinone (UPy), a versatile and simple methodology was demonstrated for the construction of macroscopic structures based on UPy‐CNT/polymer composites prepared by a combination of two functionalization approaches: 1) covalent attachment of UPy pendants on the multiwalled CNT surface ( UPy‐MWCNTs ) and 2) directed self‐assembly of UPy‐MWCNTs within polymers bearing UPy pendants ( Bis‐UPy 1 and Bis‐UPy 2 ) by quadruple complementary DDAA–AADD hydrogen‐bond recognition (D=donor, A=acceptor).     

Spatially Controllable DNA Condensation by a Water‐Soluble Supramolecular Hybrid of Single‐Walled Carbon Nanotubes and β‐Cyclodextrin‐Tethered Ruthenium Complexes

A supramolecular hybrid is prepared by the supramolecular surface modification of single‐walled carbon nanotube (SWCNT) with cationic β‐cyclodextrin‐tethered ruthenium complexes through a spacer molecule that contains both an adamantane and a pyrene moiety. By employing the supramolecular hybrid, spatially controllable DNA condensation along the SWCNT skeleton is achieved by anchoring cationic ruthenium complexes on the surface. Furthermore, because of the unique physiological properties of SWCNTs, the cationic supramolecular hybrid can be used as a nonviral gene delivery system with the ruthenium complexes as a fluorescent probe to monitor uptake of DNA by cells.     

Supramolecular Gels Based on Multi‐Walled Carbon Nanotubes Bearing Covalently Attached Cyclodextrin and Water‐Soluble Guest Polymers

The preparation of associative networks containing multi‐walled carbon nanotubes (MWCNTs) with covalently attached cyclodextrin (CD) rings and poly[(isobutylene)‐co‐(maleic anhydride)‐co‐(maleic acid‐(4‐tert‐butylphenyl)amide)] in water is described in this study. The synthesis of CD containing MWCNTs is realized by an amidation reaction of oxidized MWCNTs with propargylamine followed by a 1,3‐dipolar cycloaddition with CD‐azide. Dispersion behavior indicated the high stability of these networks. An increase in viscosity compared to a solution of pure polymer as a cause of network formation is observed. The addition of a CD‐decomposing enzyme (taka‐diastase from Aspergillus oryzae) let the network collapse and results in sedimentation of the modified MWCNTs.

     

Supramolecular Self‐Assembly of Polymer‐Functionalized Carbon Nanotubes on Surfaces

Summary: Supramolecular self‐assembly of poly(methyl methacrylate)‐grafted multiwalled carbon nanotubes (MWNT‐g‐PMMA) was reported herein. The MWNT‐g‐PMMA (85 wt.‐% PMMA) dispersed in tetrahydrofuran could self‐assemble into suprastructures on surfaces such as gold, mica, silicon, quartz, or carbon films. With decreasing concentration of the MWNT‐g‐PMMA from 3 to 0.1 mg · mL⁻¹, the assembled structures changed from cellular and basketwork‐like forms to multilayer cellular networks and individual needles. SEM, AFM, and TEM measurements confirmed the morphology of the assembled suprastructures, and revealed the assembly mechanism. Phase separation during evaporation of the solvent drives the MWNT‐g‐PMMA nanohybrids to assemble and form the suprastructures, and the rigid MWNTs stabilize the structures.

SEM images of self‐assembled suprastructures of basketwork (a), cellular network (b), and needles (c) from the THF solution of the PMMA‐grafted MWNTs on gold surface.     

Metallo‐Supramolecular Diethylene Glycol: Water‐Soluble Reversible Polymers

Bis(2,2′:6′,2″‐terpyrid‐4′‐yl) diethylene glycol was synthesized as a monomer unit and further utilized for polymerization with FeCl₂ in order to form water‐soluble coordination polymers. Viscosity measurements and film‐forming properties indicate the formation of linear coordination polymers or larger ring structures. The terpyridine/iron(II) complexes are stable up to temperatures of 210 °C, but can be uncomplexed by the addition of an excess of a strong competitive ligand (HEDTA) under mild conditions.

     

Explosive Decomposition of a Melamine–Cyanuric Acid Supramolecular Assembly for Fabricating Defect‐Rich Nitrogen‐Doped Carbon Nanotubes with Significantly Promoted Catalysis

A facile and scalable approach for fabricating structural defect‐rich nitrogen‐doped carbon nanotubes (MCSA‐CNTs) through explosive decomposition of melamine–cyanuric acid supramolecular assembly is presented. In comparison to pristine carbon nanotubes, MCSA‐CNT exhibits significantly enhanced catalytic performance in oxidant‐ and steam‐free direct dehydrogenation of ethylbenzene, demonstrating the potential for metal‐free clean and energy‐saving styrene production. This finding also opens a new horizon for preparing highly‐efficient carbocatalysts rich in structural defect sites for diverse transformations.     

A Supramolecular Approach for the Facile Solubilization and Separation of Covalently Functionalized Single‐Walled Carbon Nanotubes

Through a combination of an electronic‐type selective diazonium‐based attachment of a Hamilton receptor unit onto the carbon nanotube framework and a supramolecular recognition approach of a cyanuric acid derivative, we herein introduce a highly promising strategy for the tuning of carbon nanotube solubility and, directly related to that, a solution‐based easy and straightforward separation of covalently functionalized carbon nanotube derivatives with respect to their unfunctionalized counterparts. The supramolecular complexation of the cyanuric acid derivative provides the driving force for the dramatically increased dispersibility and for the long‐time stability of the individualized single‐walled carbon nanotube derivatives in chloroform. The selective covalent functionalization of metallic carbon nanotubes can easily be analyzed with the aid of scanning Raman microscopy techniques. The functional derivatives have furthermore been characterized by UV/Vis‐NIR and fluorescence spectroscopy as well as by mass spectrometric coupled thermogravimetric analysis. The investigation of the supramolecular complexation is based on an in‐depth UV/Vis‐NIR analysis and atomic force microscopy investigations.     

Tunable Water‐Soluble Supramolecular Polymers by Visible‐Light‐Regulated Host–Guest Interactions

The development of artificial self‐assembling systems with dynamic photo‐regulation features in aqueous solutions has drawn great attention owing to the potential applications in fabricating elaborate biological materials. Here we demonstrate the fabrication of water‐soluble cucurbit[8]uril (CB[8])‐mediated supramolecular polymers by connecting the fluorinated azobenzene (FAB) containing monomers through host‐enhanced heteroternary π–π stacking interactions. Benefiting from the unique visible‐light‐induced E→Z photoisomerization of the FAB photochromophores, the encapsulation behaviors between the CB[8] macrocycle and the monomers could be regulated upon visible light irradiation, resulting in the depolymerization of such CB[8]‐mediated supramolecular polymers.     

Voltammetric Detection of Ofloxacin in Human Urine at a Congo Red Functionalized Water‐Soluble Carbon Nanotube Film Electrode

A simple physical method was developed for the surface modification and the solubilization of MWNTs in water by Congo red. The resulting water‐soluble MWNTs (MWNTs‐CR) can form stable and uniform films on solid supports when dried, which was used to fabricate MWNTs‐CR modified glassy carbon electrodes (MWNTs‐CR/GCE). Voltammetric studies showed that MWNTs‐CR/GCE exhibited a strong enhancement effect on the electrooxidation of ofloxacin. MWNTs‐CR films were also proved to possess overwhelming advantages as electrochemical sensing films over other commonly used MWNTs composite films (e.g., MWNTs‐DHP and MWNTs‐Nafion), reflected by the higher oxidation current, lower background and stronger accumulation capacity towards less soluble species. The sensitive oxidation of ofloxacin at MWNTs‐CR/GCE was used for the determination of ofloxacin. Under optimal conditions, the oxidation current was proportional to ofloxacin concentration in the ranges of 5×10^?8–3.0×10^?5 M. The detection limit of 9×10^?9 M was obtained for 350 s accumulation at open circuit (S/N=3). This method was applied to the determination of ofloxacin in human urine and the result was satisfying.     

Supramolecular Complexes of Multivalent Cholesterol‐Containing Polymers to Solubilize Carbon Nanotubes in Apolar Organic Solvents

Copolymers of 2‐ethylhexyl acrylate (EHA) and cholesteryloxycarbonyl‐2‐hydroxymethacrylate (CEM) were prepared by reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Supramolecular complexes of these copolymers with carbon nanotubes (CNTs) were soluble in THF, toluene, and isooctane. The colloidal solutions remained stable for months without aggregation. The rationale for the choice of CEM was based on the high adsorption energy of cholesterol on the CNT surface, as computed by DFT calculations. Adsorption isotherms were experimentally measured for copolymers of various architectures (statistical, diblock, and star copolymers), thereby demonstrating that 2–5 cholesterol groups were adsorbed per polymer chain. Once the supramolecular complex had dried, the CNTs could be easily resolubilized in isooctane without the need for high‐power sonication and in the absence of added polymer. Analysis by atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) indicated that the CNTs were devoid of bundles. The supramolecular complexes could also be employed in an inverse emulsion polymerization of 2‐hydroxyethylmethacrylate (HEMA) in isooctane and dodecane, thereby leading to the formation of a continuous polymeric sheath around the CNTs. Thus, this technique leads to the formation of very stable dispersions in non‐polar organic solvents, without altering the fundamental properties of the CNTs.     

Preparation and Cellular Uptake of pH‐Dependent Fluorescent Single‐Wall Carbon Nanotubes

Fluorescent single‐wall carbon nanotubes (SWCNTs) were prepared by mixing cut SWCNTs with acridine orange (AO). The optical absorbance and fluorescence characteristics of AO–SWCNT conjugates display interesting pH‐dependent properties. Fluorescence microscopy in combination with transmission electron microscopy proves that AO–SWCNTs can enter HeLa cells and are located inside lysosomes. The endocytosis‐inhibiting tests show that the clathrin‐mediated endocytosis is a key step in the internalization process. The internalized AO–SWCNTs remain inside lysosomes for more than a week and have little effect on cell proliferation. These findings may be useful in understanding the SWCNT‐based intracellular drug delivery mechanism and help to develop new intracellular drug transporters.     

Chiral Supramolecular Nanotubes of Single‐Chain Magnets

We report a single‐chain magnet (SCM) made of a terbium(III) building block and a nitronyl‐nitroxide radical (NIT) functionalized with an aliphatic chain. This substitution is targeted to induce a long‐range distortion of the polymeric chain and accordingly it gives rise to chains that are curled with almost 20 nm helical pitch. They self‐organize as a chiral tubular superstructure made of 11 chains wound around each other. The supramolecular tubes have a 4.5 nm internal diameter. Overall, this forms a porous chiral network with almost 44 % porosity. Ab initio calculations highlight that each Tb^III ion possesses high magnetic anisotropy. Indeed, notwithstanding the supramolecular arrangement each chain behaves as a SCM. Magnetic relaxation with both finite and infinite‐size regimes is observed and confirms the validity of the Ising approximation. This is associated with quite strong coercive field and magnetic remanence (H_c=2400 Oe M_R=2.09 μ_B at 0.5 K) for this class of compounds.     

Supramolecular Surface Modification and Solubilization of Single‐Walled Carbon Nanotubes with Cyclodextrin Complexation

A novel approach to solubilize single‐walled carbon nanotubes (SWCNTs) in the aqueous phase is described by employing supramolecular surface modification. We use cyclodextrin complexes of synthetic molecules that contain a planar pyrene moiety or a bent, shape‐fitted triptycene moiety as a binding group connected through a spacer to an adamantane moiety that is accommodated in the cyclodextrin cavity. The binding groups attach to the sidewalls of SWCNTs through a π–π stacking interaction to yield a supramolecular system that allows the SWCNTs to dissolve in the aqueous phase through the formed hydrophilic cyclodextrin shell. The black aqueous SWCNT solutions obtained are stable over a period of months. They are characterized through absorbance, static, and time‐resolved fluorescence spectroscopy as well as Raman spectroscopy, TEM, and fluorescence‐decay measurements. Furthermore, the shape‐fitted triptycene‐based system shows a pronounced selectivity for SWCNTs with a diameter of 1.0 nm.     

Sorting Semiconducting Single‐Walled Carbon Nanotubes by Water‐Soluble Polyfluorene Assisted Electrophoresis and Its Application in Field‐effect Transistors

We report a considerably promising method based on agarose gel electrophoresis (AGE) to separate single‐walled carbon nanotubes by adding a water‐soluble polyfluorene (w‐PFO) as surfactant into the agarose gel. In this effective method, the AGE/w‐PFO gel network will trap more semiconducting single‐walled carbon nanotubes (SWNTs) with the assistance of w‐PFO, for the strong interaction between w‐PFO and semiconducting species. The optical absorbance, photoluminescence emission and resonant Raman scattering characterization were used to verify the separation effect. The purity of separated semiconducting species is as high as (98±1)%. The demonstrated field effect transistors give the on/off ratio and mobility about 27000 and 10.2 cm²·V^?1·s^?1, respectively.