An emulsifier‐free core–shell polyacrylate/diacetone acrylamide emulsion with nano‐SiO2 for room temperature curable waterborne coatings

An emulsifier‐free core–shell polyacrylate emulsion, containing nano‐SiO₂ nanoparticles in the core and diacetone acrylamide (DAAM) in the shell, has been successfully prepared by emulsifier‐free seeded emulsion polymerization. The effects of reaction temperature, dropping time, nano‐SiO₂ and initiator contents, and variation of the composition of core monomers on the amount of coagulum, particle size, and monomer conversion have been investigated. The particle morphology and the distribution of emulsion particles have been measured by transmission electron microscopy (TEM) and dynamic light scattering. The keto‐carbonyl groups on the surface of the polyacrylate emulsion nanoparticles reacted with adipic dihydrazide (ADH) to form a film with a cross‐linked network structure at room temperature. Therefore, the emulsifier‐free core–shell emulsion could be used as a two‐component room temperature curable waterborne coating. It was also found that the properties of the coating were clearly superior after using the cross‐linker. Copyright © 2009 John Wiley & Sons, Ltd.     

Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314     

Preparation and characterization of emulsifier-free core–shell interpenetrating polymer network-fluorinated polyacrylate latex particles

The emulsifier-free core–shell interpenetrating polymer network (IPN) fluorinated polyacrylate latex particles with fluorine rich in shell were prepared by emulsifier-free seeded emulsion polymerization with water as the reaction medium. The fluorinated copolymer could be fixed on the particle surface due to the formation of interpenetrating polymer network. The resultant core–shell particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS) analysis, Fourier transform infrared (FTIR) spectrometry, X-ray photoelectron spectroscopy (XPS) analysis and thermogravimetric analysis (TGA). The core–shell particles possessed very narrow monomodal particle size distributions. XPS analysis of the latex film displayed that perfluoroalkyl groups had the tendency to enrich at surface and there was a gradient concentration of fluorine in the structure of the latex film from the film–air interface to the film–glass interface. In addition, compared with the latex film of crosslinked polyacrylate prepared under the same condition, the emulsifier-free core–shell IPN-fluorinated polyacrylate latex film showed better thermal stability, higher contact angle and lower water uptake.     

Preparation and characterization of polytetrafluoroethylene‐polyacrylate core–shell nanoparticles

Polytetrafluoroethylene (PTFE)‐polyacrylate core–shell nanoparticles were produced by using PTFE micropowder and acrylate via seeded emulsion polymerization in the presence of fluorosurfactant. The properties of emulsion under various polymerization conditions were investigated and optimized. The chemical composition of the PTFE‐polyacrylate nanoparticles was characterized by Fourier‐transform infrared spectrometry (FTIR). The particle size and core–shell structure of the resulting PTFE‐polyacrylate nanoparticles were confirmed by transmission electron microscopy (TEM). Wettability of the PTFE‐polyacrylate core–shell particles was higher than the pristine PTFE. The formation of this kind of PTFE‐polyacrylate core–shell nanoparticles could improve the compatibility of PTFE with other materials because PTFE is covered by polyacrylate shell, which make them promising in various fields. Copyright © 2007 John Wiley & Sons, Ltd.     

The preparation of amphiphilic core‐shell nanospheres by using water‐soluble macrophotoinitiator

The amphiphilic poly(AM‐co‐SA)‐ITXH macrophotoinitiator was synthesized by precipitation photopolymerization under UV irradiation with isopropylthioxanthone (ITX) as free radical photoinitiator. A novel method has been developed to prepare amphiphilic core‐shell polymer nanospheres via photopolymerization of methyl methacrylate (MMA) in aqueous media, with amphiphilic copolymer macrophotoinitiator poly(AM‐co‐SA)‐ITXH. During polymerization, the amphiphilic macroradicals underwent in situ self‐assembly to form polymeric micelles, which promoted the emulsion polymerization of the monomer. Thus, amphiphilic core‐shell nanospheres ranging from 70 to 140 nm in diameter were produced in the absence of surfactant. The conversion of the monomer, number average molecular weights (M_n), and particle size were found to be highly dependent on the macrophotoinitiator and monomer concentration. The macrophotoinitiator and amphiphilic particles were characterized by FTIR, UV‐vis, ¹H NMR, TEM, DSC, and contact angle measurements. The results showed the particles had well‐defined amphiphilic core‐shell structure. This new method is scientifically and technologically significant because it provides a commercially viable route to a wide variety of novel amphiphilic core‐shell nanospheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 936–942, 2010     

Emulsion copolymerization of fluorinated acrylate in the presence of a polymerizable emulsifier

An emulsifier-free fluorinated polyarcylate emulsion was synthesized by a seed emulsion polymerization method from methyl methacrylate (MMA), butyl acrylate (BA) and hexafluorobutyl methacrylate (HFMA) in the presence of a polymerizable emulsifier—ammonium allyloxtmethylate nonylphenol ethoxylates sulfate (DNS-86). Influences of the DNS-86 level on electrolyte stability of the emulsifier-free emulsion were discussed. In addition, the emulsion and the films were characterized by Fourier transformed infrared (FT-IR) spectrometry, nuclear magnetic resonance (¹H NMR) spectrometry, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), thermogravimetry (TG), and contact angle (CA) analysis, respectively. The FT-IR spectra and ¹H NMR spectrum showed that HFMA was effectively involved in the emulsion copolymerization and monomers formed the fluorine-containing acrylate copolymer. The resulted emulsion particles had a core–shell structure and a narrow particle size distribution. XPS and CA analysis revealed that a gradient concentration of fluorine existed along the depth profile of the fluorine-containing emulsion film. One side of the film was richer in fluorine and more hydrophobic than the other side. The film formed from the fluorine-containing emulsion showed higher thermal stability than that of the fluorine-free emulsion.     

One‐stage synthesis of narrowly dispersed polymeric core‐shell microspheres

A method of one‐stage soap‐free emulsion polymerization to synthesize narrowly dispersed core‐shell microspheres is proposed. Following this method, core‐shell microspheres of poly(styrene‐co‐4‐vinylpyridine), poly(styrene‐co‐methyl acrylic acid), and poly[styrene‐co‐2‐(acetoacetoxy)ethyl methacrylate‐co‐methyl acrylic acid] are synthesized by one‐stage soap‐free emulsion polymerization of a mixture of one or two hydrophobic monomers and a suitable hydrophilic monomer in water. The effect of the molar ratio of the hydrophobic monomer to the hydrophilic one on the size, the core thickness, and the shell thickness of the core‐shell microspheres is discussed. The molar ratio of the hydrophobic and hydrophilic monomers and the hydrophilicity of the resultant oligomers of the hydrophilic monomer are optimized to synthesize narrowly dispersed core‐shell microspheres. A possible mechanism of one‐stage soap‐free emulsion polymerization to synthesize core‐shell microspheres is suggested and coagglutination of the oligomers of the hydrophilic monomers on the hydrophobic core is considered to be the key to form core‐shell microspheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1192–1202, 2008     

Synthesis and surface properties of self-crosslinking core–shell acrylic copolymer emulsions containing fluorine/silicone in the shell

Stable emulsions of a core–shell acrylic copolymer (non-crosslinkable V0, and crosslinkable V2, V4, V6, and V8, where the numbers indicate the wt% of crosslinking agent based on the total acrylate monomer content) containing butyl acrylate (BA, 45 wt%), glycidyl methacrylate (GMA, 45 wt%), heptadecafluorodecyl methacrylate (PFA, 10 wt%), and various contents of crosslinking agent (vinyltriethoxysilane, VTES) were synthesized using a three-stage seeded emulsion polymerization process with a small amount of surfactant. The average particle size and viscosity of emulsions increased significantly with increasing VTES content. This study examined the effects of the VTES content on the surface/mechanical properties of self-crosslinked copolymer film samples containing a fixed acrylate monomer content to find the optimum VTES content. XPS showed that the film–air surface of the copolymer samples had a higher fluorine/silicone content than the film–dish interface. The tensile strength/modulus, thermal stability, and two Tgs (α and β Tgs) of the film samples increased significantly with increasing VTES content. The contact angle of the film samples increased with increasing VTES content up to approximately 6 wt%, and then decreased slightly. The optimum VTES content was approximately 6 wt% based on the total acrylate monomer content to obtain a high water/oil repellent coating material (V6) with the highest water/methylene iodide-contact angles (118.2°/81.8°) and lowest surface energy (18.4 mN/m).     

PMMA‐based core‐shell nanoparticles with various PTFE cores

Polytetrafluoroethylene (PTFE) latices with spherical and rod‐like particles in the submicrometer size range, were employed as seeds in the emulsifier‐free methylmethacrylate (MMA) emulsion polymerization to obtain PTFE‐polymethylmethacrylate (PMMA) core‐shell nanoparticles. Stable latices were generally obtained. No residual PTFE was found at the end of the reaction. By appropriately choosing the ratio between MMA and PTFE in the reaction mixture, particles with predetermined size and monodisperse or narrow size distribution were prepared. The high structural regularity of the core‐shell samples allows the preparation of film with a periodic distribution of the cores thus ultimately leading to a well structured 2D colloidal crystal. A very peculiar crystallization behavior was observed because of the PTFE compartmentalization in the composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2928–2937, 2009     

Polar Gradient Latex Particles with Hydrophilic Core and Hydrophobic Shell Prepared via Multistep Emulsion Polymerization

Monodisperse polar gradient particles were synthesized via a three‐step emulsion polymerization using poly(butyl acrylate‐methyl methacrylate‐methacrylic acid‐ethylene glycol dimethacrylate) (P(BA‐MMA‐MAA‐EGDMA)) as core, poly(methyl methacrylate‐methacrylic acid‐styrene) (P(St‐MMA‐MAA)) as interlayer and polystyrene (PSt) as shell. The particle growth and encapsulation in each emulsion polymerization step were followed by transmission electron microscopy (TEM), dynamic light scattering (DLS) and conductometric titration. Results indicated that the feeding mode and the interlayer were essential to prepare the polar gradient latex particles with hydrophilic core and hydrophobic shell. The morphologies of the two‐layer core/interlayer and three‐layer core/interlayer/shell particles were observed in TEM micrographs, and the sequential encapsulations of the carboxyl‐containing core and the core/interlayer particles were confirmed by an increase in the particle size as well as an increase in the buried carboxyl percentage.     

Synthesis and characterization of emulsifier-free trilayer core–shell polysilsesquioxane/polyacrylate/poly(fluorinated acrylate) hybrid latex particles

The trilayer core–shell polysilsesquioxane/polyacrylate/poly(fluorinated acrylate) (PSQ/PA/PFA) hybrid latex particles are successfully prepared, using functional PSQ latex particles with reactive methacryloxypropyl groups synthesized by the hydrolysis and polycondensation of (3-methacryloxypropyl)trimethoxysilane in the presence of a reactive emulsifier as seeds. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and dynamic light scattering (DLS) confirm that the resultant hybrid latex particles have evident trilayer core–shell structure and a narrow size distribution. The Fourier transform infrared (FTIR) spectra show that fluorinated acrylate monomers are effectively involved in the emulsion copolymerization and formed the fluorine-containing hybrid latex particles. XPS analysis of the obtained hybrid latex film reveals that the intensity of fluorine signal in the film–air interface is higher than that in the film–glass interface. In addition, compared with pure polyacrylate latex film, the obtained fluorine-containing hybrid film shows higher hydrophobicity and thermal stability, and lower surface free energy.     

Highly magnetic latexes from submicrometer oil in water ferrofluid emulsions

The synthesis of functionalized submicrometer magnetic latex particles is described as obtained from a preformed magnetic emulsion composed of organic ferrofluid droplets dispersed in water. Composite (polystyrene/γ‐Fe₂O₃) particles were prepared according to a two‐step procedure including the swelling of ferrofluid droplets with styrene and a crosslinking agent (divinyl benzene) followed by seeded emulsion polymerization with either an oil‐soluble [2,2′‐azobis(2‐isobutyronitrile)] or water‐soluble (potassium persulfate) initiator. Depending on the polymerization conditions, various particle morphologies were obtained, ranging from asymmetric structures, for which the polymer phase was separated from the inorganic magnetic phase, to regular core–shell morphologies showing a homogeneous encapsulation of the magnetic pigment by a crosslinked polymeric shell. The magnetic latexes were extensively characterized to determine their colloidal and magnetic properties. The desired core–shell structure was efficiently achieved with a given styrene/divinyl benzene ratio, potassium persulfate as the initiator, and an amphiphilic functional copolymer as the ferrofluid droplet stabilizer. Under these conditions, ferrofluid droplets were successfully turned into superparamagnetic polystyrene latex particles, about 200 nm in size, containing a large amount of iron oxide (60 wt %) and bearing carboxylic surface charges. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2642–2656, 2006     

Synthesis of single‐core and multiple‐core core‐shell nanoparticles by RAFT emulsion polymerization: Lead sulfide‐copolymer nanocomposites

We report here a simple and direct route for the preparation of lead sulfide (PbS) quantum dots (QDs) embedded into polymeric nanospheres by emulsion polymerization. In this process, QDs are first dispersed in an aqueous solution containing a statistical oligomer constituted of five butyl acrylate and ten acrylic acid units prepared by reversible addition fragmentation chain transfer (RAFT) polymerization using a trithiocarbonate as RAFT agent. Then, the dispersion of PbS QDs is engaged into an emulsion polymerization process to form core‐shell nanoparticles. Transmission electron microscopy reveals the presence of single‐core core‐shell particles at low concentration of PbS QD, whereas multiple‐core core‐shell particles containing either well separated or aggregated PbS QDs are formed at high concentration of PbS QDs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Core–shell and gradient morphology polymer particles analyzed by X‐ray photoelectron spectroscopy: Effect of monomer feed order

The synthesis of composite latex particles possessing core–shell and gradient morphologies, respectively, using seeded starve‐fed semibatch emulsion polymerization of styrene (St) and methyl methacrylate (MMA) is presented. The focus is on the effect of the monomer feed order on the particle morphology development. The particle morphology is assessed using a novel approach which entails comparing the experimental surface composition as a function of polymerization time (particle growth) obtained by X‐ray photoelectron spectroscopy with the predicted surface composition using a mass balance mathematical model. Both types of composite latexes (core–shell and gradient) feature changes with polymerization time in the oxygen/carbon surface composition which enables one to track the morphology development. Differential scanning calorimetry is also implemented to analyze the extent of phase separation. The monomer feed order is shown to play a crucial role—under the present conditions, gradient and core–shell particles are obtained if the feed order is St/MMA (St fed first), but not if the feed order is reversed. These findings illustrate that thermodynamic factors are important, given that thermodynamically it is more favorable for MMA‐rich chains to occupy the oil–water interface to reduce the interfacial tension. Systems where St is the second stage monomer lead to mixed structures rather than the targeted core–shell or gradient morphology with St‐rich chains at the particle surface. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2513–2526     

Surfactant‐free synthesis of amphiphilic diblock copolymer in aqueous phase by a self‐stability process

Amphiphilic polymeric particles with hydrophobic cores and hydrophilic shells were prepared via living radical emulsion polymerization of styrene using a water‐soluble poly(acrylamide)‐based macro‐RAFT agent in aqueous solution in the absence of any surfactants. Firstly, the homopolymerization of acrylamide (AM) was carried out in aqueous phase by reversible addition‐fragmentation chain transfer radical polymerization (RAFT) using a trithiocarbonate as a chain transfer agent. Then the PAM‐based macro‐RAFT agent has been used as a water‐soluble macromolecular chain transfer agent in the batch emulsion polymerization of Styrene (St) free of surfactants. The RAFT controlled growth of hydrophobic block led to the formation of well‐defined poly(acrylamide)‐copolystyrene amphiphilic copolymer, which was able to work as a polymeric stabilizer (self‐stability). Finally, very stable latex was prepared, having no visible phase separation for several months. FTIR and ¹H‐NMR measurements showed that the product was the block copolymer PAM‐co‐PS in the form of stable latex. Atomic force microscope (AFM), transmission electron microscope (TEM), and dynamic light scattering (DLS) studies indicated that the nanoparticles have a narrow particle size distribution and the average particle hydrodynamic radius was kept in the diameter of 58 nm. Core‐shell structure of the copolymer was also recorded by TEM. The mechanism of the self‐stability of polymer particles during the polymerization in the absence of surfactants was studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3098–3107, 2008     

Preparation of epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles

Epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles were prepared by the postaddition of glycidyl methacrylate (GMA) via emulsion polymerization. The outermost shell of obtained multilayered core–shell particles was made up of poly(glycidyl methacrylate) (PGMA). A semicontinuous process involving the dropwise addition of GMA was used to avoid demulsification of the emulsion system. The amount of grafted PGMA was quantified by Fourier transform infrared spectroscopy and was altered in a wide range (1–50 wt % to styrene). The binding efficiency was usually high (ca. 90%), indicating strong adhesion between the silica core and the polymer shell. There were approximately four or five original silica beads, which formed a cluster, per composite of nanoparticles whose size was about 60–70 nm. Other main factors of polymerization conditions including the amounts of sodium dodecyl sulfonate and silica are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2253–2262, 2004     

Study on soap‐free P(MMA‐EA‐AA or MAA) latex particles with narrow size distribution

Soap‐free poly(methyl methacrylate‐ethyl acrylate‐acrylic acid or methacrylic acid) [P(MMA‐EA‐AA or MAA)] particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and acrylic acid (AA) or methacrylic acid (MAA), and the influences of the mass ratio of core/shell monomers used in the two stages of polymerization ([C/S]_w) and initiator amount on polymerization, particle size and its distribution were investigated by using different monomer addition modes. Results showed that when the batch swelling method was used, the monomer conversion was more than 96.0% and particle size distribution was narrow, and the particle size increased first and then remained almost unchanged at around 600 nm with the [C/S]_w decreased. When the drop‐wise addition method was used, the monomer conversion decreased slightly with [C/S]_w decreased, and large particles more than 750 nm in diameter can be obtained; with the initiator amount increased, the particle size decreased and the monomer conversion had a trend to increase; the particle size distribution was broader and the number of new particles was more in the AA system than in the MAA system; but the AA system was more stable than the MAA system at both low and high initiator amount. Copyright © 2006 John Wiley & Sons, Ltd.     

Surface functionalization of styrene/butyl acrylate latex with a water‐soluble monosaccharide monomer. Synthesis and morphology of the polymer particles

New polymer latexes bearing saccharide moieties on the particle surface were synthesized by using a water‐soluble sugar monomer, such as 1‐deoxy‐1‐methacryl‐amido‐D ‐glucitol, (MAG). All the latexes were prepared by a two‐stage emulsion polymerization technique. In the first step, the core was prepared with butyl acrylate (BA) and styrene (St). In the second step, the seed latex was polymerized with ethyl acrylate (EA) and MAG. The influence of a bifunctional monomer such as allyl methacrylate (ALMA), introduced at various concentrations, on the final latexes morphologies and properties was investigated. It was found that the latex particles exhibit a core‐shell structure. The mass balance of MAG showed that the main part of the sugar moiety is on the shell layer. The molecular properties, such as structure, composition, and molecular weight, were determined by elemental analysis, ¹H‐ and ¹³C‐NMR spectroscopy. Colloidal (particle size and their distributions), thermal, and rheological properties were also studied. Copyright © 2003 John Wiley & Sons, Ltd.     

Preparation,morphology, and thermoresponsive properties of poly(N‐isopropylacrylamide)‐based copolymer microgels

In this research, thermoresponsive copolymer latex particles with an average diameter of about 200–500 nm were prepared via surfactant‐free emulsion polymerization. The thermoresponsive properties of these particles were designed by the addition of hydrophilic monomers [acrylic acid (AA) and sodium acrylate (SA)] to copolymerize with N‐isopropylacrylamide (NIPAAm). The effects of the comonomers and composition on the synthesis mechanism, kinetics, particle size, morphology, and thermoresponsive properties of the copolymer latex were also studied to determine the relationships between the synthesis conditions, the particle morphology, and the thermoresponsive properties. The results showed that the addition of hydrophilic AA or SA affected the mechanism and kinetics of polymerization. The lower critical solution temperature (LCST) of the latex copolymerized with AA rose to a higher temperature. However, because the strong hydrophilic and ionic properties of SA caused a core–shell structure, where NIPAAm was in the inner core and SA was in the outer shell, the LCST of the latex copolymerized with SA was still the same as that of pure poly(N‐isopropylacrylamide) latex. It was concluded that these submicrometer copolymer latex particles with different thermoresponsive properties could be applied in many fields. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 356–370, 2006