Poly(cyclic imino ether)s Beyond 2‐Substituted‐2‐oxazolines

2‐Oxazolines (2‐OZO) are 5‐membered cyclic imino ethers whose cationic ring‐opening polymerization (CROP) mechanism and resulting polymer properties are extensively studied. However, also 6‐ and 7‐membered cyclic imino ethers can be polymerized via CROP. Together with the much less studied 4‐ and 5‐substituted main‐chain chiral poly(2‐oxazoline)s (P‐2‐OZO), these compounds are interesting monomers to enhance the versatility of (co)poly(cyclic imino ether)s. To emphasize the potential of such alternative cyclic imino ether monomers, we provide an overview on the polymerizations of 2‐oxazine (2‐OZI) and chiral 4‐ and 5‐substituted 2‐OZO as well as of selected properties of the resulting polymers. In addition, the hydrolysis of these polymers into the corresponding poly(alkylene imine)s will be addressed.

     

Metallocene catalysts for olefin polymerizations. XXIV. Stereoblock propylene polymerization catalyzed by rac-[anti-ethylidene(1-η5-tetramethylcyclopentadienyl)(1-η5-indenyl)dimethyltitanium: A two-state propagation

Racemic-anti-[ethylidene(1-η⁵-tetramethylcyclopentadienyl) (1-η⁵-indenyl)dimethyltitanium ( 6 ) has been synthesized and its molecular structure determined by x-ray diffraction methods. The two Ti?Me(1) and Ti?Me(2) units have bond distances differing by 0.08 Å and their proton NMR resonances are separated by over 1 ppm. Using this compound and methylaluminoxane (MAO) as the activator, at 25°C the 6 /MAO catalyst produced polypropylene having crystalline domain with physical crosslinks. The polymers obtained at lower polymerization temperatures are rheologically liquids. The behaviors of this catalyst system resembles closely the previously reported rac-[anti-ethylidene(1-η⁵-tetramethylcyclopentadienyl) (1-η⁵-indenyl)dichlorotitanium ( 4 )/MAO system. The structure of 6 determined here furnishes tangible support for the proposed two-state (isomeric)-switching propagation mechanism. Addition of MAO to 6 causes broadening of the Me(1) resonance in the ¹H-NMR spectra, and 6 is decomposed by Ph₃C⁺B(C₆F₅)^-₄. © 1992 John Wiley & Sons, Inc.     

Synthesis and non‐isothermal crystallization kinetics of poly(ethylene terephthalate)‐co‐poly(propylene glycol) copolymers

Poly(ethylene terephthalate)‐co‐poly(propylene glycol) (PET‐co‐PPG) copolymers with PPG ratio ranging from 0 to 0.90 mol% were synthesized by the melt copolycondensation. The intrinsic viscosity, structure, non‐isothermal crystallization behavior, nucleation and spherulitic growth of the copolymers were investigated by Ubbelohde viscometer, Proton Nuclear Magnetic Resonance (¹H‐NMR), differential scanning calorimetry, and polarized optical microscopy, respectively. The non‐isothermal crystallization process of the copolymers was analyzed by Avrami, Ozawa, Mo's, Kissinger, and Dobreva methods, respectively. The results showed that the crystallizability of PET was apparently enhanced with incorporating a small amount of PPG, which first rose and then reduced with increasing amount of PPG in the copolymers at a given cooling rate. The crystallization mechanism was a three‐dimensional growth with both instantaneous and sporadic nucleation. Particularly, PET‐co‐PPG containing 0.60 mol% PPG exhibited the highest crystallizability among all the copolymers. Copyright © 2015 John Wiley & Sons, Ltd.     

Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Synthesis and microstructural study of stereoblock elastomeric polypropylenes from metallocene catalyst (2‐PhInd)2ZrCl2 activated with cocatalyst mixtures

Various elastomeric polypropylenes (PPs) are synthesized through homogeneous propylene polymerization with metallocene catalyst (2‐PhInd)₂ZrCl₂ in the presence of different cocatalyst mixtures: triethylaluminum (TEA)/methylaluminoxane (MAO) or triisobutylaluminum (TIBA)/MAO in the range of Al_AlR3/Al_MAO = 0.0–0.9. The cocatalyst formulation impacts the resultant polymer microstructure and the thermal and dynamic mechanical properties of the produced PPs. ¹³C NMR analysis of the polymers reveals essentially atactic PP, with mmmm = 7.9%, when Al_AlR3/Al_MAO = 0.0. The mmmm pentad content is maximized when Al_AlR3/Al_MAO = 0.8; for TIBA, mmmm = 23.5%; and for TEA, mmmm = 17.6%. Differential scanning calorimetry analysis and dynamic mechanical thermal analysis corroborate these findings. Specifically, T_m, ΔH_m, and T_g are essentially maximized under these conditions, and the minimum damping is observed for Al_AlR3/Al_MAO = 0.6–0.8. ¹H NMR analysis of the mixtures of catalyst and cocatalysts (without monomer) shows very minor differences for [Zr]:Al_AlR3 in the range of 1:1–1:5. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Copolymerization of Propene and 5‐Vinyl‐2‐Norbornene: A Simple Route to Polar Poly(propylene)s

Summary: The metallocenes rac‐C₂H₄(Ind)₂ZrCl₂ ( 1 ), rac‐Me₂Si(Ind)₂ZrCl₂ ( 2 ), and rac‐Me₂Si(2‐Me‐benz[e]Ind)₂ZrCl₂ ( 3 ) efficiently copolymerize propene and 5‐vinyl‐2‐norbornene (VNB). 1 and 2 give a high VNB content and high productivities, whereas 3 gives moderate incorporation. Surprisingly, precatalysts 1 and 2 , which have very closely related structures, showed very different reactivities toward VNB, with 1 having a greater affinity for VNB than for propene. The copolymers are quantitatively converted into polyolefins with polar functionalities.

     

A Novel Synthetic Procedure for Stereoblock Poly(propylene) with a Living Polymerization System

Summary: Propylene polymerization was conducted at 0 °C in heptane or chlorobenzene (CB) by an ansa‐fluorenylamidodimethyltitanium complex combined with dried, modified methylaluminoxane that had been treated by dilution with heptane and successively repeatedly vacuum dried to remove any free trialkylaluminiums. The post‐polymerizations testified that the living polymerization proceeded irrespective of the solvent used. The heptane system gave the syndiotactic poly(propylene)s (PPs), whereas the CB system gave almost atactic PPs. After the first polymerization in heptane had been completed, the same amounts of propylene and CB were added for the second polymerization. This procedure gave the syndiotactic‐atactic stereoblock PP with narrow molecular‐weight distributions.

Structure of the ansa‐fluorenylamidodimethyltitanium complex and its application to the synthesis of syndiotactic‐atactic stereoblock poly(propylene)s reported here.     

Toughening of a propylene‐b‐(ethylene‐co‐propylene) copolymer by a plastomer

Several blends, covering the entire range of compositions, of a metallocenic ethylene‐1‐octene copolymer (CEO) with a multiphasic block copolymer, propylene‐b‐(ethylene‐co‐propylene) (CPE) [composed of semicrystalline isotactic polypropylene (iPP) and amorphous ethylene‐co‐propylene segments], have been prepared and analyzed by differential scanning calorimetry, X‐ray diffraction, optical microscopy, stress‐strain and microhardness measurements, and dynamic mechanical thermal analysis. The results show that for high CEO contents, the crystallization of the iPP component is inhibited and slowed down in such a way that it crystallizes at much lower temperatures, simultaneously with the crystallization of the CEO crystals. The mechanical results suggest very clearly the toughening effect of CEO as its content increases in the blends, although it is accompanied by a decrease in stiffness. The analysis of the viscoelastic relaxations displays, first, the glass transition of the amorphous blocks of CPE appearing at around 223 K, which is responsible for the initial toughening of the plain CPE copolymer in relation to iPP homopolymer. Moreover, the additional toughening due to the addition of CEO in the blends is explained by the presence of the β relaxation of CEO that appears at about 223 K. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1869–1880, 2002     

Simulation of Molecular‐Weight Distribution Using a New Kinetic Model of Ethene Polymerization Catalyzed by Cp2ZrCl2‐MAO

The kinetics of ethene polymerization catalyzed by Cp₂ZrCl₂‐methylaluminoxane (MAO) is studied by applying a new kinetic model. Important kinetic parameters of polymerization were estimated. In addition a method of calculating the molecular‐weight distribution (MWD) of the resultant polyethene was established by developing this new model. The final product is expected to comprise three components, which are produced by different active‐site types, and the MWD of one of the components is less than 2. Good agreement between the estimated value and the variation of polydispersity was achieved.     

New Poly(propylene glycol)‐ and Poly(ethylene glycol)‐Based Polymer Gelators with L‐Lysine

Summary: New polymer gelators consisting of poly(propylene glycol) or poly(ethylene glycol) and L ‐lysine‐based low‐molecular‐weight gelators have been developed. These polymer gelators were synthesized according to a simple procedure with high reaction yield, and formed organogels in many organic solvents. The organogelation mechanism was proposed from the transmission electron microscopy and FTIR spectroscopy studies.

Structures of the polymer gelators synthesized here.     

Crystallization kinetics and morphology of biodegradable poly(butylene succinate‐co‐propylene succinate)s

The crystallization behavior of biodegradable poly(butylene succinate) and copolyesters poly(butylene succinate‐co‐propylene succinate)s (PBSPS) was investigated by using ¹H NMR, DSC and POM, respectively. Isothermal crystallization kinetics of the polyesters has been analyzed by the Avrami equation. The 2.2‐2.8 range of Avrami exponential n indicated that the crystallization mechanism was a heterogeneous nucleation with spherical growth geometry in the crystallization process of polyesters. Multiple melting peaks were observed during heating process after isothermal crystallization, and it could be explained by the melting and recrystallization model. PBSPS was identified to have the same crystal structure with that of PBS by using wide‐angle X‐ray diffraction (WAXD), suggesting that only BS unit crystallized while the PS unit was in an amorphous state. The crystal structure of polyesters was not affected by the crystallization temperatures, too. Besides the normal extinction crosses under the POM, the double‐banded extinction patterns with periodic distance along the radial direction were also observed in the spherulites of PBS and PBSPS. The morphology of spherulites strongly depended on the crystallization temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 420–428, 2007     

以聚丙二醇二苯甲酸酯为给电子体的丙烯聚合催化剂

 采用聚丙二醇二苯甲酸酯(PPGDB)为内给电子体制备了一种新的丙烯聚合催化剂MgCl2/PPGDB/TiCl4. 该催化剂用于丙烯聚合时,除了具有与以邻苯二甲酸二异丁酯为给电子体的催化剂相当的活性和立体定向性外,其特点在于所得产物的分子量分布较宽(Mw/Mn＞8.0). 采用红外光谱研究了催化剂中PPGDB与MgCl2的作用机制,结果表明PPGDB中的酯官能团和醚官能团可同时与MgCl2配位. 这种双官能团的配位作用是所得聚合物分子量分布较宽的主要原因.     

Molecular‐Weight‐Dependence on Domain Formation of Grafted Poly(ethylene‐co‐propylene) in a Poly(propylene) Matrix

Several novel poly(propylene)‐graft‐poly(ethylene‐co‐propylene) copolymers with isotactic poly(propylene) (PP) backbones and ethylene/propylene rubber (EPR) branches were synthesized. The thermomechanical properties of these samples were investigated using a dynamic mechanical analyzer. There appeared to be a critical EPR molecular weight above which a two‐phase system developed with EPR domains dispersed in a PP matrix. This domain formation gave an enhanced loss modulus compared to a commercial high impact PP product below 40°C.     

Poly(ethylene terephthalate) copolymers containing 5‐nitroisophthalic units. I. Synthesis and characterization

Poly(ethylene terephthalate‐co‐5‐nitroisophthalate) copolymers, abbreviated as PETNI, were synthesized via a two‐step melt copolycondensation of bis(2‐hydroxyethyl) terephthalate and bis(2‐hydroxyethyl) 5‐nitroisophthalate mixtures with molar ratios of these two comonomers varying from 95/5 to 50/50. Polymerization reactions were carried out at temperatures between 200 and 270 °C in the presence of tetrabutyl titanate as a catalyst. The copolyesters were characterized by solution viscosity, GPC, FTIR, and NMR spectroscopy. They were found to be random copolymers and to have a comonomer composition in accordance with that used in the corresponding feed. The copolyesters became less crystalline and showed a steady decay in the melting temperature as the content in 5‐nitroisophthalic units increased. They all showed glass‐transition temperatures superior to that of PET with the maximum value at 85 °C being observed for the 50/50 composition. PETNI copolyesters appeared stable up to 300 °C and thermal degradation was found to occur in two well‐differentiated steps. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1934–1942, 2000     

NMR Analysis and Regiochemical Structure of Some Selectively 13C‐Enriched Poly(propylene)s

Summary: The regiochemical structures of poly(propylene)s obtained in the presence of three single‐site catalysts, Cp*Ti(CH₃)₃ + B(C₆F₅)₃ (I + III), CpTi(CH₃)₃ + B(C₆F₅)₃ (II + III), and VCl₄ + anisole + Al(C₂H₅)₂Cl (V + A), are investigated by ¹³C NMR analysis. Polymer 1 , obtained in the presence of I + III is, seemingly, fully regioregular, while, surprisingly, polymer 2 , obtained in the presence of II + III, appears to be alternating sequence of primary and secondary regioblocks, very much like polymer 3 , obtained in the presence of V + A. The stereochemical structure of the polymer obtained in the presence of I + III is in excellent agreement with a Bernoullian statistical model of the stereoselective propagation, while those of the other two polymers possibly require a Coleman‐Fox model.

¹³C NMR spectra of 10%‐enriched poly[(2‐¹³C)propylene], 1′ and 2′ , prepared under the conditions reported in Table 1 for the corresponding poly(propylene)s, 1 and 2 . The resonances of the tertiary carbons are diagnostic of the regioblock structure of sample 2′ .     

Poly(propylene glycol)‐based ammonium ionenes as segmented ion‐containing block copolymers

The synthesis and characterization of series of segmented poly(propylene glycol) (PPG)‐based ammonium ionenes is described. Bromine end‐capped oligomers were successfully synthesized using the reaction of 6‐bromohexanoyl chloride with 1000, 2000, and 4000 g/mol PPGs. ¹H NMR spectroscopy, titration studies, and matrix‐assisted laser desorption ionization‐time of flight (MALDI‐TOF) mass spectrometry revealed the difunctionality of the oligomers. First, a series of PPG‐based ammonium ionenes was synthesized from bromine end‐capped PPG oligomers and N,N,N′,N′‐tetramethyl‐1,6‐hexanediamine. For this series, a single glass transition temperature (T_g) of approximately ?66 °C was observed through differential scanning calorimetry (DSC); dynamic mechanical analysis (DMA) showed the onset of flow ranged from 20 to 80 °C. In addition, a series of PPG‐based ammonium ionenes containing 1,12‐dibromododecane was synthesized to increase the aliphatic hard segment (HS) content and enhance the mechanical properties of the resulting materials. For these, two T_g's were observed using DMA; DMA also showed the onset of flow of ionenes containing higher HS content (33 wt %) occurred in the range of 100–140 °C. Tensile analysis for these ionenes demonstrated an average tensile strength at break ranging from 0.2 to 2.4 MPa. Small angle X‐ray scattering (SAXS) profiles for these ionenes showed that Bragg distances increase linearly with the molecular weight of PPG soft segment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4159–4167, 2010     

Micellization and Thermogelation of Poly(ether urethane)s Comprising Poly(ethylene glycol) and Poly(propylene glycol)

A series of multiblock poly(ether urethane)s comprising poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) segments were synthesized. Their aqueous solutions exhibited thermogelling behavior at critical gelation concentrations (CGC) ranging from 8 to 12 wt%. The composition and structural information of the copolymers were studied by GPC and ¹H NMR. The critical micellization concentration (CMC) and thermodynamic parameters for micelle formation were determined at different temperatures. The temperature response of the copolymer solutions were studied and found to be associated with the composition of the copolymers.     

Block–Stereoblock Copolymers of Poly(ϵ‐Caprolactone) and Poly(Lactic Acid)

A magnesium complex of the type {ONNN}Mg‐HMDS wherein {ONNN} is a sequential tetradentate monoanionic ligand is introduced. In the presence of an alcohol initiator this complex catalyzes the living and immortal homopolymerization of the lactide enantiomers and ?‐caprolactone at room‐temperature with exceptionally high activities, as well as the precise block copolymerization of these monomers in a one‐pot synthesis by sequential monomer addition. Copolymers of unprecedented microstructures such as the PCL‐b‐PLLA‐b‐PDLA and PDLA‐b‐PLLA‐b‐PCL‐b‐PLLA‐b‐PDLA block–stereoblock microstructures that feature unique thermal properties are readily accessed.     

Ultrasonic‐assisted Synthesis of Fe Nanoparticles in the Presence of Poly(N‐vinyl‐2‐pyrrolidone)

Zero‐valent iron particles were prepared by wet reduction chemistry assisted with ultrasonic treatment. Such prepared particles have uniform size, exhibit crystalline structure and show strong paramagnetic property. Their surface modification by coating poly(N‐vinyl‐2‐pyrrolidone) (PVP) was investigated. The resulting Fe(0)‐PVP particles were monodispersed and possessed enhancing magnetization saturation. Those synthesis conditions to control the particle size and distribution were exploited.     

Synthesis and characterization of poly(3,3 bis(azidomethyl)oxetane‐co‐ε‐caprolactone)s

The quasi‐living cationic copolymerization of 3,3‐bis(chloromethyl)oxetane (BCMO) and ε‐caprolactone (ε‐CL), using boron trifluoride etherate as catalyst and 1,4‐butanediol as coinitiator, was investigated in methylene chloride at 0°C. The resulting hydroxyl‐ended copolymers exhibit a narrow molecular weight polydispersity and a functionality of about 2. The reactivity ratios of BCMO (0.26) and ε‐CL (0.47), and the T_g of the copolymers, indicate their statistical character. The synthesis of poly(3,3‐bis(azidomethyl)oxetane‐co‐ε‐caprolactone) from poly(BCMO‐co‐ε‐CL) via the substitution of the chlorine atoms by azide groups, using sodium azide in DMSO at 110°C, occurs without any degradation, but the copolymers decompose at about 240°C. All polymers were characterized by vapor pressure osmometry or steric exclusion chromatography, ¹H‐NMR and FTIR spectroscopies, and DSC. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1027–1039, 1999