Electrospun Mats from Styrene/Maleic Anhydride Copolymers: Modification with Amines and Assessment of Antimicrobial Activity

New antimicrobial microfibrous electrospun mats from styrene/maleic anhydride copolymers were prepared. Two approaches were applied: (i) grafting of poly(propylene glycol) monoamine (Jeffamine® M‐600) on the mats followed by formation of complex with iodine; (ii) modification of the mats with amines of 8‐hydroxyquinoline or biguanide type with antimicrobial activity. Microbiological screening against S. aureus, E. coli and C. albicans revealed that both the formation of complex with iodine and the covalent attachment of 5‐amino‐8‐hydroxyquinoline or of chlorhexidine impart high antimicrobial activity to the mats. In addition, S. aureus bacteria did not adhere to modified mats.

     

Preparation,Post‐Modification,and Antibacterial Application of Gelatin Electrospun Membranes

Two bis(diaryldiazomethane)s substituted with amino groups are synthesized and used for the surface modification of membranes electrospun from gelatin. These membranes are then reacted with tolylene‐2,4‐diisocyanate to give urea‐functionalized materials, so that hydrogen peroxide can be reversibly bound onto their surface. These membranes are characterized by scanning electron microscopy, XPS, differential scanning calorimeter, and tensile test to show their surface properties and bulk properties. The surface modification with amino‐substituted diazomethanes and the subsequent cross‐linking reaction with diisocyanates contribute to high loadings of hydrogen peroxide, and greatly increase the antibacterial activity of gelatin‐derived membranes, which open a new horizon in the preparation of high loading antiseptic/antibacterial biomacromolecular surfaces and interfaces.     

Evaluation of Antibacterial and Antifungal Properties of Low Molecular Weight Chitosan Extracted from Hermetia illucens Relative to Crab Chitosan

This study shows the research on the depolymerisation of insect and crab chitosans using novel enzymes. Enzyme preparations containing recombinant chitinase Chi 418 from Trichoderma harzianum, chitinase Chi 403, and chitosanase Chi 402 from Myceliophthora thermophila, all belonging to the family GH18 of glycosyl hydrolases, were used to depolymerise a biopolymer, resulting in a range of chitosans with average molecular weights (M_w) of 6–21 kDa. The depolymerised chitosans obtained from crustaceans and insects were studied, and their antibacterial and antifungal properties were evaluated. The results proved the significance of the chitosan’s origin, showing the potential of Hermetia illucens as a new source of low molecular weight chitosan with an improved biological activity.     

Polycaprolactone Electrospun Fiber Mats Prepared Using Benign Solvents: Blending with Copper(II)‐Chitosan Increases the Secretion of Vascular Endothelial Growth Factor in a Bone Marrow Stromal Cell Line

Inducing the formation of new blood vessels (angiogenesis) is an essential requirement for successful tissue engineering. Approaches have been proposed to enhance angiogenesis using growth factors and other biomolecules; however, this approaches present drawbacks in terms of high cost and patient safety. Copper is known to effectively regulate angiogenesis and can offer a more cost‐effective alternative than the direct use of growth factors. With this study, a strategy to incorporate copper in electrospun fibrous scaffolds with pro‐angiogenic properties is presented. Polycaprolactone (PCL) and copper(II)‐chitosan are electrospun using benign solvents. The morphological and physicochemical properties of the fiber mats are investigated through scanning electron microscopy (SEM), static contact angle measurements, energy dispersive X‐ray, and Fourier‐transform infrared spectroscopies. Scaffold stability in phosphate buffered saline at 37 °C is monitored over 1 week. A bone marrow stromal cell line (ST‐2) is cultured for 7 days and its behavior is evaluated using SEM, fluorescence microscopy and a tetrazolium salt‐based colorimetric assay. Results confirm that PCL/copper(II)‐chitosan is suitable for electrospinning. The fiber mats are biocompatible and favor cell colonization and infiltration. Most notably, the angiogenic potential of PCL/copper(II)‐chitosan blends is confirmed by a three‐fold increase in VEGF secretion by ST‐2 cells in the presence of copper(II)‐chitosan.     

Enhancement of Fatty Acid‐based Polyurethanes Cytocompatibility by Non‐covalent Anchoring of Chondroitin Sulfate

For tissue engineering purpose biopolymer chondroitin sulfate (CS), one of the major components of cartilage and bone extracellular matrix, was immobilized onto the surface of amino‐functionalized polyurethane (PU) films derived from naturally occurring oleic and 10‐undecenoic acids. The amino‐functionalized PUs were prepared by aminolysis with 1,6‐hexamethylenediamine of synthesized PUs containing methyl ester groups. FTIR‐ATR, XPS, SEM, and water contact angle measurements were used to confirm the surface changes at each step of treatment, both in morphologies and chemical composition. Cytotoxicity and cell morphology analysis using osteoblast cell line MG63 showed that PU‐CS films are suitable materials for cell growth, spreading, and differentiation.

     

Preparation of colloidal stable fluoroalkyl end‐capped oligomer/silver nanocomposites––application to the surface modification of traditional organic polymers with these nanocomposites

A variety of fluoroalkyl end‐capped oligomers/silver nanocomposites were prepared by the reactions of silver ions with poly(methylhydrosiloxane) in the presence of fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer, N,N‐dimethylacrylamide cooligomer containing poly(dimethylsiloxane) segments in organic media such as toluene and 1,2‐ dichloroethane. These fluorinated oligomers/silver nanocomposites thus obtained were found to exhibit clear plasmon absorption bands around 420 nm related to the formation of silver nanoparticles. In particular, these composites could display narrow plasmon absorptions around 420 nm in toluene by the addition of trioctylamine (TOA). On the other hand, the corresponding non‐fluorinated N‐(1,1‐ dimethyl‐3‐oxobutyl)acrylamide oligomer was not able to afford such a plasmon absorption under similar conditions. These fluorinated oligomers/silver nanocomposites in organic media have been found to be stable for more than 10 days. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements showed that silver nanoparticles could be effectively encapsulated into fluorinated oligomeric aggregate cores to afford colloidal stable fluorinated oligomers/silver nanocomposites. Fluorinated oligomers/silver nanocomposites were also applied to the surface modification of traditional organic polymers such as polystyrene (PSt) and poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a higher surface antibacterial activity related to the silver nanoparticles on their surface. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface Coating with a Thermoresponsive Copolymer for the Culture and Non‐Enzymatic Recovery of Mouse Embryonic Stem Cells

A thermoresponsive substrate based on a triblock copolymer, poly(N‐isopropylacrylamide)‐block‐poly[(R)‐3‐hydroxybutyrate]‐block‐poly(N‐isopropylacrylamide) (PNIPAAm‐PHB‐PNIPAAm), co‐coated with gelatin, was developed for the culture and non‐enzymatic recovery of mouse embryonic stem cells. After culture, the cells could be detached by cooling at 4 °C for 20 min without trypsin digestion. The embryonic stem cells remained undifferentiated after culture on the gelatin/copolymer‐coated surfaces, similar to standard culture techniques. Overall, the triblock copolymer coating was superior to the PNIPAAm homopolymer coating in terms of supporting better cell growth, being more stable, presenting a more homogeneous surface coating, and maintaining pluripotency of the embryonic stem cells.

     

Preparation of chitosan functionalized end‐capped Ag‐NPs and composited with Fe3O4‐NPs: Controlled release to pH‐responsive delivery of progesterone and antibacterial activity against pseudomonas aeruginosa (PAO‐1)

In this work, functionalized chitosan end‐capped Ag nanoparticles (NPs) and composited with Fe₃O₄‐NPs was prepared as pH‐responsive controlled release carrier for gastric‐specific drug delivery. The structure of prepared material was characterized by FE‐SEM, XRD, EDS and FT‐IR analysis. The loading behavior of the progesterone onto this novel material was studied in aqueous medium at 25°C and their release was followed spectrophotometrically at 37°C in seven different buffer solutions (pH 1.2, 2.2, 3.2, 4.2, 5.2, 6.2 and 7.2) to simulate intestine and gastric media which experimental results reveal more release rate in pH 1.2 (gastric medium) with respect to other buffers. This observation is attributed to dependency of the CS‐IMBDO‐Ag‐Fe₃O₄‐NPs and progesterone structure with buffer pH that candidate this new material as prospective pH‐sensitive carrier for gastric‐targeted drug delivery. On the other hand, the antibacterial properties of this material against gram‐negative bacterium pseudomonas aeruginosa (PAO‐1) in agar plates was studied and accordingly based on broth micro dilution the minimum bactericidal concentration (MBC) and minimum inhibitory concentration (MIC) with respect to standard CLSI in different concentrations of CS‐IMBDO‐Ag‐Fe₃O₄‐NPs was calculated. The results reveal that MIC and MBC values are 50 and 1250 μg/mL, respectively. In addition, extracts of Portulaca oleracea leaves was prepared and its antibacterial activity in single and binary system with CS‐IMBDO‐Ag‐Fe₃O₄‐NPs as synergies effect against PAO‐1 was tested and results shown that these materials have significant synergistic effect for each other.     

Antibacterial Activities and Nuclease Properties of Two New Ternary Copper(II) Complexes with 2‐(4′‐Thiazolyl)‐benzimidazole and 2,2′‐Bipyridine/1,10‐phenanthroline

Two new complexes: [Cu(TBZ)(bipy)Cl]Cl·H₂O ( 1 ) and [Cu(TBZ)(phen)Cl]Cl·H₂O ( 2 ) [TBZ=2‐(4′‐thiazolyl)‐ benzimidazole, phen=1,10‐phenanthroline and bipy=2,2′‐bipyridine] have been synthesized and characterized by elemental analysis, molar conductivity, IR, and UV‐vis methods. Complex 2 , structurally characterized by single‐crystal X‐ray crystallography, crystallizes in the monoclinic space group P2₁/c in a unit cell of a=0.85257(12) nm, b=2.5358(4) nm, c=1.15151(13) nm, β=118.721(8)°, V=2.183.2(5) nm³, Z=4, D_c=1.624 g·cm⁻³, µ=1.367 mm⁻¹. The complexes, free ligands and chloride copper(II) salt were each tested for their ability to inhibit the growth of two gram‐positive (B. subtilis and S. aureus) and two gram‐negative (Salmonella and E. coli) bacteria. The complexes showed good antibacterial activities against the microorganisms. The interaction between the complexes and calf thymus DNA in aqueous solution was investigated adopting electronic absorption spectroscopy, fluorescence spectroscopy, viscosity measurements and cyclic voltammetry. Results suggest that the two complexes can bind to DNA by intercalative mode. In addition, the result of agarose gel electrophoresis suggested that the complexes can cleave the plasmid DNA at physiological pH and room temperature. Mechanistic studies with different inhibiting reagents reveal that hydroxyl radicals, and a singlet oxygen‐like copper‐oxo species are all involved in the DNA scission process mediated by the complexes.