Synthesis and characterization of new soluble polyamides containing phthalimide pendent group

A dicarboxylic acid monomer, 5-phthalimidoisophthalic acid, containing a phthalimide pendent group was prepared by the condensation of 5-aminoisophthalic acid and phthalic anhydride in glacial acetic anhydride. The monomer was reacted with various aromatic diamines to produce polyamides using triphenyl phosphite and pyridine as condensing agents. These polyamides were produced with inherent viscosities of 0.64–1.14 dL · g⁻¹. All the polymers, characterized by wide-angle X-ray diffraction, revealed an amorphous nature resulting from the presence of the bulky pendent group. These polyamides exhibited excellent solubility in a variety of solvents such as N- methyl-2-pyrrolidinone, N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, dimethyl sulfoxide, pyridine, and cyclohexanone. These polyamides showed glass-transition temperatures (T_g's) between 247 and 273 °C (by DSC) and 248 and 337 °C (by a dynamic mechanical analyzer). The thermogravimetric analytic measurement revealed the decomposition temperature at 10% weight-loss temperatures (Td₁₀) ranging from 442 to 530 °C in nitrogen. The polyamides containing phthalimide groups exhibited higher T_g and Td₁₀ values than those having no phthalimide groups. Transparent, tough, and flexible films of these polyamides could be cast from the DMAc solutions. These casting films had tensile strengths ranging from 81 to 126 MPa, elongations at break ranging from 7 to 13%, and tensile moduli ranging from 2.0 to 2.9 GPa. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1557–1563, 2001     

Synthesis and characterization of organo‐soluble polyamides containing triaryl imidazole pendant and ether linkage moieties: thermal,photophysical, and chemiluminescent properties

A new symmetrical diamine monomer containing a triaryl imidazole pendant group was successfully synthesized by the nucleophilic substitution of hydroquinone with the synthesized 2‐(2‐chloro‐5‐nitrophenyl)‐4, 5‐diphenyl‐1H‐imidazole (I). A series of novel polyamides were prepared from the diamine monomer and various aliphatic and aromatic dicarboxylic acids via phosphorylation polyamidation. These polyamides are readily soluble in many organic solvents; their inherent viscosities ranged from 0.68 to 0.89 dl/g and gave tough and flexible films by solution‐casting. They had useful levels of thermal stability associated with relatively high T_gs (186–278°C), 10% weight loss temperatures in the range of 355–482°C, and char yields at 600°C in air up to 67%. All the polyamides have fluorescence emission in dilute (0.2 g/dl) DMAc solution with maxima at 425–495 nm and with the quantum yields in the range 14–28%. The chemiluminescence activity of polyamides was also studied in the presence of peroxyoxalate. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of new soluble aromatic polyamides from diaminotetraphenylimidazolin-2-one and various aromatic dicarboxylic acid chlorides

Novel aromatic polyamides, having inherent viscosities of 0.76-2.31 dL/g, were synthesized by the low temperature solution polycondensation of a new highly phenylated diamine monomer having an imidazolinone group, 1,3-bis(4-aminophenyl)-4,5-diphenylimidazoline-2-one (TPIDA), with various aromatic diacid chlorides. All the polymers were amorphous, and most of the polyamides were readily soluble in organic solvents such as N-methyl–2-pyrrolidone, N,N-dimethylacetamide (DMAc), and m-cresol. Flexible and tough films could be prepared from the DMAc solutions of these soluble aromatic polyamides. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyamides were in the range of 275–315°C and 430–505°C, respectively. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of new soluble aromatic polyamides derived from 1,4‐Bis(4‐carboxyphenoxy)‐2, 5‐di‐tert‐butylbenzene

Aromatic polyamides based on a novel bis(ether‐carboxylic acid) were synthesized by the direct phosphorylation condensation method. 1,4‐Bis(4‐carboxyphenoxy)‐2,5‐di‐tert‐butylbenzene was combined with various diamines containing flexible linkages and side substituents to render a set of eight novel aromatic polyamides. The polymers were produced with high yields and moderate to high inherent viscosities (0.49–1.32 dL/g) that corresponded to weight‐average and number‐average molecular weights (by gel permeation chromatography) of 31,000–80,000 and 19,000–50,000, respectively. Except for a single example, the polyamides were essentially amorphous and soluble in a variety of common solvents such as cyclohexanone, dioxane, and tetrahydrofuran. They showed glass‐transition temperatures of 250–295 °C (by differential scanning calorimetry) and 10% weight loss temperatures above 460 °C, as revealed by thermogravimetric analysis in nitrogen. Polymer films, obtained by casting from N,N‐dimethylacetamide solutions, exhibited good mechanical properties, with tensile strengths of 83–111 MPa and tensile moduli of 2.0–2.2 GPa. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 475–485, 2001     

Synthesis and characterization of new soluble polyamides from 1,1‐bis[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane and various diamines

A new dicarboxylic acid monomer, 1,1‐bis[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane, bearing a pendent tert‐butylcyclohexylidene group was prepared in three steps from 4‐tert‐butylcyclohexanone. The monomer was reacted with various diamines to produce a series of new polyamides with triphenyl phosphite and pyridine as condensing agents. These polyamides were produced with inherent viscosities of 0.74 to 1.02 dL g⁻¹. All the polymers were characterized by X‐ray diffraction that revealed this amorphous nature. These polymers exhibited excellent solubility in a variety of solvents. Almost all the polymers could be dissolved in N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, dimethyl sulfoxide, pyridine, and even in tetrahydrofuran and cyclohexanone. These polymers showed glass‐transition temperatures between 223 and 256 °C and decomposition temperatures at 10% weight loss ranging from 468 to 491 °C and 469 to 498 °C in nitrogen and air atmospheres, respectively. Transparent, tough, and flexible films of these polymers were cast from the DMAc solutions. These polymer films had tensile strengths ranging from 76 to 99 MPa, elongations at break from 7 to 19%, and initial moduli from 2.1 to 2.7 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 797–803, 2000     

Synthesis and properties of new soluble N-phenyl–substituted aromatic-aliphatic and all aromatic polyamides derived from 4,4′-dianilinobiphenyl

New N-phenylated aromatic-aliphatic and all aromatic polyamides were prepared by the high-temperature solution polycondensation of 4,4′-dianilinobiphenyl with both aliphatic (methylene chain lengths of 6–11) and aromatic dicarboxylic acid chlorides. All of the aromatic-aliphatic polyamides and the wholly aromatic polyamides exhibited an amorphous nature and good solubility in amide-type and chlorinated hydrocarbon solvents, except for those aromatic polyamides containing p-oriented phenylene or biphenylylene linkages in the backbone; the latter were crystalline and insoluble in organic solvents except m-cresol. The N-phenylated aromatic-aliphatic polyamides and aromatic polyamides had glass transition temperatures in the range of 79–116°C and 207–255°C, respectively, and all the polymers were thermally stable with decomposition temperatures above 400°C in air. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2193–2200, 1998     

Synthesis and characterization of novel polyamide‐imides containing noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit

A new diimide‐dicarboxylic acid, 2,2′‐dimethyl‐4,4′‐bis(4‐trimellitimidophenoxy)biphenyl (DBTPB), containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by the condensation reaction of 2,2′‐dimethyl‐4,4′‐bis(4‐minophenoxy)biphenyl (DBAPB) with trimellitic anhydride in glacial acetic acid. A series of new polyamide‐imides were prepared by direct polycondensation of DBAPB and various aromatic diamines in N‐methyl‐2‐pyrrolidinone (NMP), using triphenyl phosphite and pyridine as condensing agents. The polymers were produced with high yield and moderate to high inherent viscosities of 0.86–1.33 dL · g⁻¹. Wide‐angle X‐ray diffractograms revealed that the polymers were amorphous. Most of the polymers exhibited good solubility and could be readily dissolved in various solvents such as NMP, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide (DMF), dimethyl sulfoxide, pyridine, cyclohexanone, and tetrahydrofuran. These polyamide‐imides had glass‐transition temperatures between 224–302 °C and 10% weight loss temperatures in the range of 501–563 °C in nitrogen atmosphere. The tough polymer films, obtained by casting from DMAc solution, had a tensile strength range of 93–115 MPa and a tensile modulus range of 2.0–2.3 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 63–70, 2001     

Synthesis and characterization of new soluble aromatic polyimides from diaminotetraphenylimidazolinone and aromatic tetracarboxylic dianhydrides

A series of new soluble aromatic polyimides with inherent viscosities of 0.65–1.12 dL/g were synthesized from 1,3-bis(4-aminophenyl)-4,5-diphenylimidazolin-2-one and various aromatic tetracarboxylic dianhydrides by the conventional two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polyimides could also be prepared by the one-pot procedure in homogeneous m-cresol solution. Most of the tetraphenyl-pendant polyimides were soluble in organic solvents such as N,N-dimethylacetamide, 1,3-dimethyl-2-imidazolidone, and m-cresol. Some polyimides gave transparent, flexible, and tough films with good tensile properties. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyimides were in the range of 287–326 and 520–580°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1767–1772, 1998     

Synthesis and characterization of aromatic polyamides containing S-triazine rings in the main chain

Ten new aromatic polyamides containing s-triazine rings in the main chain were synthesized by the low temperature interfacial polycondensation technique involving the reactions of each of the two s-triazine containing diacylchlorides, viz., 2,4-bis (4-chlorocarbonylphenoxy)-6-methoxy-s-triazine and 2,4-bis(3-chlorocarbonylphenoxy)-6-methoxy-s-triazine, with five aromatic diamines namely, 4,4′-bis(4-aminophenoxy)diphenyl sulfone, 4,4′-bis(3-aminophenoxy)diphenyl sulfone, 2,2-bis[4(4-aminophenoxy) phenyl] propane, 1,4 bis (4-amino-phenoxy) benzene, and 1,3-bis (4-aminophenoxy)benzene. The resulting polyamides were characterized by viscosity measurements, IR and ¹H-NMR spectroscopy, solubility tests, x-ray diffraction, and thermogravimetry. The polyamides had inherent viscosities in the range of 0.16–1.06 dL/g in N,N-dimethylacetamide at 30°C. Most of the s-triazine containing polyamides dissolved readily at room temperature in polar solvents. Except for the polyamide PA-2, the polyamides did not lose weight below 350°C under a nitrogen atmosphere. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1077–1085, 1997     

Synthesis and characterization of aromatic polyamides containing alkylphthalimido pendent groups

A series of polyisophthalamides containing pendent phthalimido groups and flexible side spacers were prepared from four novel diacids and three commercial aromatic diamines. These polyamides were prepared in high yields and with high molecular weights by direct polycondensation with triphenyl phosphite and pyridine as condensing agents. The weight‐average and number‐average molecular weights, measured by gel permeation chromatography, were 70,000–137,000 and 47,000–86,000 g/mol, respectively. The novel polyamides were amorphous and readily soluble and showed glass‐transition temperatures of 150–240 °C, as measured by differential scanning calorimetry. Thermogravimetric analysis showed that the 10% weight‐loss temperatures in nitrogen were 355–430 °C, a significant improvement in thermal stability having been observed with the increase in the side‐chain length. A theoretical quantum mechanical study was successfully carried out to explain these results. Flexible and tough films, cast from polymer solutions, showed tensile strengths of 50–125 MPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3711–3724, 2002     

Synthesis and properties of soluble aromatic polyamides derived from 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene

The synthesis of a new bis(ether carboxylic acid), 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene, in which two orthogonally arranged carboxyphenoxyfluorene entities are connected through an sp³ carbon atom (the spiro center), is reported. The direct phosphorylation polycondensation of this diacid monomer with various aromatic diamines yields aromatic polyamides containing 9,9′‐spirobifluorene moieties in the main chain. The presence of the spiro segment restricts the close packing of the polymer chains and decreases interchain interactions, resulting in amorphous polyamides with enhanced solubility, and high glass‐transition temperatures and good thermal stability are maintained through controlled segmental mobility. The glass‐transition temperatures of these polyamides are in the range of 234–306 °C, with 10% weight losses occurring at temperatures above 530 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1160–1166, 2003     

Synthesis and properties of novel soluble polyamides having ether linkages and laterally attached p‐terphenyl units

A new ether‐bridged aromatic dicarboxylic acid, 2′,5′‐bis(4‐carboxyphenoxy)‐p‐terphenyl ( 3 ), was synthesized by the aromatic fluoro‐displacement reaction of p‐fluorobenzonitrile with 2′,5′‐dihydroxy‐p‐terphenyl in the presence of potassium carbonate, followed by alkaline hydrolysis. A set of new aromatic polyamides containing ether and laterally attached p‐terphenyl units was synthesized by the direct phosphorylation polycondensation of diacid 3 with various aromatic diamines. The polymers were produced with high yields and moderately high inherent viscosities (0.44–0.79 dL/g). The polyamides derived from 3 and rigid diamines, such as p‐phenylenediamine and benzidine, and a structurally analogous diamine, 2′,5′‐bis(4‐aminophenoxy)‐p‐terphenyl, were semicrystalline and insoluble in organic solvents. The other polyamides were amorphous and organosoluble and could afford flexible and tough films via solution casting. These films exhibited good mechanical properties, with tensile strengths of 91–108 MPa, elongations to break of 6–17%, and initial moduli of 1.95–2.43 GPa. These polyamides showed glass‐transition temperatures between 193 and 252 °C. Most of the polymers did not show significant weight loss before 450 °C, as revealed by thermogravimetric analysis in nitrogen or in air. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4056–4062, 2004     

Synthesis and properties of aromatic polyamides based on a benzonorbornane bis(ether carboxylic acid)

A set of new aromatic polyamides containing ether and benzonorbornane units were synthesized by the direct phosphorylation polycondensation of 3,6‐bis(4‐carboxyphenoxy)benzonorbornane with various aromatic diamines. The polymers were produced in high yields and moderate to high inherent viscosities (0.64–1.70 dL/g). The polyamides derived from rigid diamines such as p‐phenylenediamine and benzidine were semicrystalline and insoluble in organic solvents. The other polyamides were amorphous and organosoluble and afforded flexible and tough films via solution casting. These films exhibited good mechanical properties, with tensile strengths of 95–101 MPa, elongations at break of 13–25%, and initial moduli of 1.97–2.33 GPa. The amorphous polyamides showed glass‐transition temperatures between 176 and 212 °C (by differential scanning calorimetry) and softening temperatures between 194 and 213 °C (by thermomechanical analysis). Most of the polymers did not show significant weight loss before 450 °C in nitrogen or in air. Some properties of these polyamides were also compared with those of homologous counterparts without the pendent norbornane groups. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 947–957, 2002     

Synthesis and properties of new halogen‐substituted polyamides from 5‐halo‐m‐phenylenediamines and both aliphatic and aromatic dicarboxylic acids

New halogen‐substituted aromatic–aliphatic and wholly aromatic polyamides with high inherent viscosities were synthesized by the direct polycondensation of 5‐halo‐m‐phenylenediamines, where the halogens were Cl, Br, and I, with both aliphatic and aromatic dicarboxylic acids in N‐methyl‐2‐pyrrolidone with a mixture of triphenyl phosphite and pyridine as a condensing agent. The solubility of the halogen‐substituted polyamides was much higher than that of the parent polyamides derived from m‐phenylenediamine. The glass‐transition temperatures of the substituted aromatic–aliphatic polyamides increased in the order Cl < Br < I, whereas the temperatures of 10% weight loss in air decreased in the reverse order. The limiting oxygen index values, as an indication of flammability, increased for the substituted aromatic–aliphatic polyamides in the order Cl < Br < I. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3911–3918, 2000     

Preparation and properties of a new aromatic polyamide with an ethoxycarbonyl pendant group: Poly(4,4′‐diamino‐2′‐ethoxycarbonyl‐benzanilide terephthalamide)

A new aromatic polyamide containing a pendant ethoxycarbonyl group was successfully synthesized from the reaction between 4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide and terephthaloyl chloride. The new polymer was soluble in organic solvents such as N‐methyl‐2‐pyrrolidone and dimethylacetamide, and a tough and transparent film was cast from the polymer solution with viscosities ranging from 2.6 to 5.6 dL/g. When the polymer film was heat‐treated at a temperature greater than 300 °C, a cyclization reaction occurred between the ethoxycarbonyl group and the adjacent amide bond to form a benzoxazinone unit in the polymer backbone. The thermal decomposition onset temperature of the cyclized film was about 523 °C, which was somewhat lower than that of poly(p‐phenylene terephthalamide) (PPTA; 566 °C); however, the decomposition rate was slower than that of PPTA to yield a higher char residue. The dispersion temperature of the uncyclized poly(4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide terephthalamide) (PDEBTA) was about 340 °C, whereas that of the cyclized PDEBTA was not clear. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 936–942, 2000     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Synthesis and characterization of new soluble aromatic polyamides based on 4‐(1‐adamantyl)‐1, 3‐bis(4‐aminophenoxy)benzene

A set of new aromatic polyamides were synthesized by the direct phosphorylation condensation of 4‐(1‐adamantyl)‐1,3‐bis‐(4‐aminophenoxy)benzene with various diacids. The polymers were produced with high yields and moderate to high inherent viscosities (0.43–1.03 dL/g), and the weight‐average molecular weights and number‐average molecular weights, determined by gel permeation chromatography, were in the range of 37,000–93,000 and 12,000–59,000, respectively. The polyamides were essentially amorphous and soluble in a variety of solvents such as N,N‐dimethylacetamide (DMAc), cyclohexanone, and tetrahydrofuran. They showed glass‐transition temperatures in the range of 240–300 °C (differential scanning calorimetry) and 10% weight‐loss temperatures over 450 °C, as revealed by thermogravimetric analysis in nitrogen. All the polymers gave strong films via casting from DMAc solutions, and these films exhibited good mechanical properties, with tensile strengths in the range of 77–92 MPa and tensile moduli between 1.5 and 2.5 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1014–1023, 2000     

Synthesis and properties of new soluble aromatic polybenzoxazoles from 4,4′-diamino-3,3′-dihydroxytriphenylamines and aromatic dicarboxylic acids

Two new triphenylamine-based bis (o-aminophenol) monomers, 4,4′-diamino-3,3′-dihydroxytriphenylamines, were successfully synthesized by the cesium fluoride-mediated condensation of 2-(benzyloxy)-4-fluoronitrobenzene with aniline derivatives, followed by simultaneous deprotection and reduction. Aromatic polybenzoxazoles having inherent viscosities of 0.58–1.05 dL/g were obtained by the low-temperature solution polycondensation of the bis(aminophenol)s with various aromatic dicarboxylic acid chlorides and the subsequent thermal cyclodehydration of the resultant poly(hydroxyamide)s. All the polybenzoxazoles were amorphous, and most of them were soluble in organic solvents such as m-cresol and o-chlorophenol. Flexible and tough films of polybenzoxazoles could be cast from the DMAc solutions of some aromatic poly(hydroxyamide)s, followed by thermal cyclodehydration. The glass transition temperatures and 10% weight loss temperatures of the polybenzoxazoles under nitrogen were in the range of 262–327 and 610–640°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1987–1994, 1998     

Synthesis and characterization of highly soluble wholly aromatic polyamides containing both furanyl and phenyl units

This paper presents the synthesis and characterization of two series of polymeric compounds comprising eight furan-based polyamides prepared via melt polycondensation at low temperatures using various combinations of five aromatic raw materials. The chemical and physical structures and thermal stabilities of the obtained polyamides were investigated by various characterization methods. In addition, the polyamides were subjected to solubility testing in five common organic solvents. The results showed that the proposed furan-based polyamides possessed thermal stabilities similar to those of conventional high-performance aromatic polyamides, but with greatly improved solubility. Accordingly, the introduction of furan groups increased the solubility of the polyamides with respect to the solubility of their individual precursors, which is highly advantageous for subsequent polyamide processing and expanding their range of potential applications.     

Synthesis,characterization, and water sorption properties of new aromatic polyamides containing benzimidazole and ethylene oxide moieties

New polyamides, containing a benzimidazole side group and ethylene oxide moieties in the structural repeat unit, were synthesized by low‐temperature polycondensation. The aim of this design was to obtain polyamides that were more soluble in common organic solvents and hence had better processability than benzimidazole polyamides while maintaining the water sorption properties characteristic of the latter. The results showed that the number of ether linkages of the repeat unit played an important role in the glass‐transition temperature and in the water sorption properties, the polyamides with one or two ethylene oxide units being more hydrophilic than benzimidazole polyamides. However, the length of the ethylene oxide chain played a minor role in the solubility because the second member of the series, with two ether linkages (i.e., one ethylene oxide unit), reached the same level of solubility as those polyamides with more ethylene oxide moieties. No crystallinity was observed by X‐ray and calorimetric measurements for the new polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 112–121, 2005