An arsenate with the α‐CrPO4 structure type,NaCa1–xNi3–2xAl2x(AsO4)3 (x = 0.23): crystal structure,charge‐distribution and bond‐valence‐sum analyses

Since the discovery of electrochemically active LiFePO₄, materials with tunnel and layered structures built up of transition metals and polyanions have become the subject of much research. A new quaternary arsenate, sodium calcium trinickel aluminium triarsenate, NaCa_1–x Ni_3–2x Al_2x (AsO₄)₃ (x = 0.23), was synthesized using the flux method in air at 1023 K and its crystal structure was determined from single‐crystal X‐ray diffraction (XRD) data. This material was also characterized by qualitative energy‐dispersive X‐ray spectroscopy (EDS) analysis and IR spectroscopy. The crystal structure belongs to the α‐CrPO₄ type with the space group Imma . The structure is described as a three‐dimensional framework built up of corner‐edge‐sharing NiO₆, (Ni,Al)O₆ and AsO₄ polyhedra, with channels running along the [100] and [010] directions, in which the sodium and calcium cations are located. The proposed structural model has been validated by bond‐valence‐sum (BVS) and charge‐distribution (CHARDI) tools. The sodium ionic conduction pathways in the anionic framework were investigated by means of the bond‐valence site energy (BVSE) model, which predicted that the studied material will probably be a very poor Na⁺ ion conductor (bond‐valence activation energy ∼7 eV).     

Synthesis and structural characterization of [PhE(BNMe2)2]2 (E = P or As): Six-Membered P2B4 and As2B4 Rings with Unusual Structures

The reaction of either Li₂PPh or Li₂AsPh with the diborane(4) derivative B₂(NMe₂)₂Br₂ affords the compounds [PhP(BNMe₂)₂]₂ ( 1 ) or [PhAs(BNMe₂)₂]₂ ( 2 ) in good yield. Both 1 and 2 have cyclic structures featuring non-planar P₂B₄ or As₂B₄ six-membered rings which have chair configurations. Although all four borons in each ring have planar coordination, the two phosphorus or arsenic centers have different degrees of pyramidalization. Bond distances within the rings indicate that the B? B, B? P or B? As bonds are single, whereas the exo-B? N bond lengths are consistent with significant π-bonding. The ring structures of 1 and 2 are in sharp contrast to the related boron-nitrogen species (t-BuN)₂N₄Me₄ which has a nido-N₂B₄ framework. The attempted synthesis of the nitrogen analogue of 1 or 2 by using a similar approach did not result in the isolation of [PhN(BNMe₂)₂]₂, instead the tetramino diborane(4) species [B(NMe₂)NHPh]₂ ( 3 ), which has a structure similar to other tetramine diborane(4) compounds, was isolated.     

Mischkristallbildung in den Systemen As2O5/SbAsO5 und As2O5/AsPO5 Bestimmung der spontanen Deformationen und Verfeinerung der Kristallstrukturen der ternären Randphasen

Formation of Solid Solutions within the Systems As₂O₅/SbAsO₅ and As₂O₅/AsPO₅ Determinations of the Spontaneous Deformations and Refinements of the Crystal Structures of the Ternary Border Phases As₂O₅ allows for substitution of tetrahedrally and octahedrally coordinated arsenic by phosphours and antimony, respectively. The solid solutions As_{2? x}P_xO₅ and Sb_xAs_{2? x}O₅ range from x = 0.5 to 1.0 and x = 0.75 to 1.0. The crystal structures of the ternary oxides AsPO₅ and SbAsO₅ have been refined by profile fitting of x-ray powder diagrams; both are isostructural to As₂O₅, for lattice constants see ?Inhaltsübersicht”?. Both are undergoing ferroelastic/paraelastic phase transitions which are completed at 600°C (AsPO₅) and 760°C (SbAsO₅), the spontaneous strains at room temperature being ?_s = 1.50 × 10^?2 and 2.27 × 10^?2 respectively.     

Na2Co(H2PO4)4·4H2O

In the title compound, disodium cobalt tetrakis­(dihydrogen­phosphate) tetrahydrate, the Co^II ion lies on an inversion centre and is octahedrally surrounded by two water molecules and four H₂PO₄ groups to give a cobalt complex anion of the form [Co(H₂PO₄)₄(OH₂)]^2?. The three‐dimensional framework results from hydrogen bonding between the anions. The relationship with the structures of Co(H₂PO₄)₂·2H₂O and K₂CoP₄O₁₂·5H₂O is discussed.     

M3+(H2AsO4)(H2As2O7) (M3+ = Al,Ga) and In2(H2AsO4)2(H2As2O7)2: a new layer structure type and a new framework structure type containing the rare H2As2O72− group

The crystal structures of hydrothermally synthesized aluminium dihydrogen arsenate(V) dihydrogen diarsenate(V), Al(H₂AsO₄)(H₂As₂O₇), gallium dihydrogen arsenate(V) dihydrogen diarsenate(V), Ga(H₂AsO₄)(H₂As₂O₇), and diindium bis[dihydrogen arsenate(V)] bis[dihydrogen diarsenate(V)], In₂(H₂AsO₄)₂(H₂As₂O₇)₂, were determined from single‐crystal X‐ray diffraction data collected at room temperature. The first two compounds are representatives of a novel sheet structure type, whereas the third compound crystallizes in a novel framework structure. In all three structures, the basic building units are M ³⁺O₆ octahedra (M = Al, Ga, In) that are connected via one H₂AsO₄⁻ and two H₂As₂O₇²⁻ groups into chains, and further via H₂As₂O₇²⁻ groups into layers. In Al/Ga(H₂AsO₄)(H₂As₂O₇), these layers are interconnected by weak‐to‐medium–strong hydrogen bonds. In In₂(H₂AsO₄)₂(H₂As₂O₇)₂, the H₂As₂O₇²⁻ groups link the chains in three dimensions, thus creating a framework topology, which is reinforced by weak‐to‐medium–strong hydrogen bonds. The three title arsenates represent the first compounds containing both H₂AsO₄⁻ and H₂As₂O₇²⁻ groups.     

Co3+-Rich Na1.95CoP2O7 Phosphates as Efficient Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions in Alkaline Solution

Implementing sustainable energy conversion and storage technologies is highly reliant on crucial oxygen electrocatalysis, such as the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, the pursuit of low cost, energetic efficient and robust bifunctional catalysts for OER and ORR remains a great challenge. Herein, the novel Na-ion-deficient Na_2−xCoP₂O₇ catalysts are proposed to efficiently electrocatalyze OER and ORR in alkaline solution. The engineering of Na-ion deficiency can tune the electronic structure of Co, and thus tailor the intrinsically electrocatalytic performance. Among the sodium cobalt phosphate catalysts, the Na_1.95CoP₂O₇ (NCPO5) catalyst exhibits the lowest ΔE (E_J10,OER−E_J−1,ORR) of only 0.86 V, which favorably outperforms most of the reported non-noble metal catalysts. Moreover, the Na-ion deficiency can stabilize the phase structure and morphology of NCPO5 during the OER and ORR processes. This study highlights the Na-ion deficient Na_2−xCoP₂O₇ as a promising class of low-cost, highly active and robust bifunctional catalysts for OER and ORR.     

Enhanced Anticancer Cells Effects of Optimized Suspension Stable As2O3‐Loaded Poly(lactic‐co‐glycolic acid) Nanocapsules

This study is to prepare a nanosuspension based on poly(lactic‐co‐glycolic acid) (PLGA) for delivery, controlled release and enhanced anti‐solid tumor effects of As₂O₃. As₂O₃‐loaded PLGA nanocapsules (As₂O₃‐PLGA NCs) were prepared by double emulsion‐solvent evaporation method and were optimized by univariate analysis in combination with orthogonal experimental according to several factors. The optimized As₂O₃‐PLGA NCs presented suitable physical stability, favorable size of (200.2±10.6) nm (PDI=0.117±0.008), spherical shape, and high encapsulation efficiency (92.48%±2.14%). The in vitro suspension stability of the NCs was excellent. The release of As₂O₃ from the NCs showed pH responsive release characteristics. The NCs can be efficiently taken up by SMMC‐7721 cell and showed excellent antitumor efficacy against SMMC‐7721 cell line. Then, As₂O₃‐PLGA NCs could be considered as a promising formulation for the pH dependent release of As₂O₃ in cancer cells and enhance the anti‐solid tumor effects of As₂O₃.     

Sm2As4O9: Ein ungewöhnliches Samarium(III)‐Oxoarsenat(III) gemäß Sm4[As2O5]2[As4O8]

Sm₂As₄O₉: An Unusual Samarium(III) Oxoarsenate(III) According to Sm₄[As₂O₅]₂[As₄O₈] Pale yellow single crystals of the new samarium(III) oxoarsenate(III) with the composition Sm₄As₈O₁₈ were obtained by a typical solid‐state reaction between Sm₂O₃ and As₂O₃ using CsCl and SmCl₃ as fluxing agents. The compound crystallizes in the triclinic crystal system with the space group (No. 2, Z = 2; a = 681.12(5), b = 757.59(6), c = 953.97(8) pm, α = 96.623(7), β = 103.751(7), γ = 104.400(7)°). The crystal structure of samarium(III) oxoarsenate(III) with the formula type Sm₄[As₂O₅]₂[As₄O₈] (≡ 2 × Sm₂As₄O₉) contains two crystallographically different Sm³⁺ cations, where (Sm1)³⁺ is coordinated by eight, but (Sm2)³⁺ by nine oxygen atoms. Two different discrete oxoarsenate(III) anions are present in the crystal structure, namely [As₂O₅]^4? and [As₄O₈]^4?. The [As₂O₅]^4? anion is built up of two Ψ¹‐tetrahedra [AsO₃]^3? with a common corner, whereas the [As₄O₈]^4? anion consists of four Ψ¹‐tetrahedra with ring‐shaped vertex‐connected [AsO₃]^3? pyramids. Thus at all four crystallographically different As³⁺ cations stereochemically active non‐binding electron pairs (“lone pairs”) are observed. These “lone pairs” direct towards the center of empty channels running parallel to [010] in the overall structure, where these “empty channels” being formed by the linkage of layers with the ecliptically conformed [As₂O₅]^4? anions and the stair‐like shaped [As₄O₈]^4? rings via common oxygen atoms (O1 – O6, O8 and O9). The oxygen‐atom type O7, however, belongs only to the cyclo‐[As₄O₈]^4? unit as one of the two different corner‐sharing oxygen atoms.     

Die Chlorooxoarsenate(III) (PPh4)2[As4O2Cl10] · 2 CH3CN und (PPh4)2[As2OCl6] · 3 CH3CN

The Chlorooxoarsenates(III) (PPh₄)₂[As₄O₂Cl₁₀] · 2 CH₃CN and (PPh₄)₂[As₂OCl₆] · 3 CH₃CN (PPh₄)₂[As₂Cl₈] can be prepared from As₂O₃, SOCl₂ and PPh₄Cl in acetonitrile. Its oxidation with chlorine yields PPh₄[AsCl₆]. This was also obtained directly from arsenic, chlorine and PPh₄Cl, (PPh₄)₂[As₄O₂Cl₁₀] · 2 CH₃CN being a side product; the latter was obtained with high yield from AsCl₃, As₂O₃ and PPh₄Cl in acetonitrile. By addition of PPh₄Cl it was converted to (PPh₄)₂[As₂OCl₆] · 3 CH₃CN. According to their X-ray crystal structure analyses, both crystallize in the triclinic space group P 1. The [As₄O₂Cl₁₀]^2– ion can be regarded as a centrosymmetric association product of two Cl₂AsOAsCl₂ molecules and two Cl^– ions, each Cl^– ion being coordinated with all four As atoms. In the [As₂OCl₆]^2– ion the As atoms are linked via the O atom and two Cl atoms.     

Single Crystal Growth and Crystal Structure of Mercurous Diarsenate(V), (Hg2)2(As2O7)

Polycrystalline mercurous diarsenate(V), (Hg₂)₂(As₂O₇), was prepared by a redox‐reaction between stoichiometric amounts of HgO and As₂O₃. Canary yellow single crystals were obtained by subsequent chemical transport reactions using HgCl₂ as transport agent [550 → 500 °C, 5 d, sealed and evacuated silica ampoules]. The crystal structure (orthorhombic, Pnma, Z = 4, a = 9.9803(8), b = 12.2039(10), c = 7.2374(6)Å) is composed of two crystallographically independent Hgequation/tex2gif-stack-1.gif dumbbells (d¯(Hg—Hg) = 2.5133Å) with a symmetric oxygen coordination sphere, and a diarsenate group with a staggered conformation and a bent bridging angle As—O—As = 121.0(7)°. The building units are arranged in a layer‐like assembly parallel to (010) and are connected via common oxygen atoms to form a three‐dimensional network.     

Investigation of the substitution at the anionic positions BaT<Subscript>2</Subscript>As<Subscript>2</Subscript> (T = Fe,Ni) superconductors

The possibilities of electron/hole doping of two ternary arsenides, BaFe₂As₂ and BaNi₂As₂, via partial substitution at the arsenic position by 16 and 14 group elements, have been studied. While no substitution has been observed for chalcogens, BaFe₂As₂ incorporates Sb, Si, and Ge at the As site; BaNi₂As₂ incorporates Sb, Ge, Sn, and Pb. The observed results can be tentatively explained suggesting that 14 group elements are incorporated into the BaT₂As₂ structures as X^6? ₂ dumbbells.     

Zur Kenntnis der ionischen Ozonide P(CH3)4O3 und As(CH3)4O3

On the Knowledge of the New Ionic Ozonides P(CH₃)₄O₃ and As(CH₃)₄O₃ P(CH₃)₄O₃ and As(CH₃)₄O₃ were prepared via ion exchange in liquid ammonia and characterized by X-ray-powder, IR, MS and DTA techniques. P(CH₃)₄O₃ and As(CH₃)₄O₃ are isotypic and have a wurtzite-like arrangement of ions with rotationally disordered O₃^?. (Powder data: P6₃mc; P(CH₃)₄O₃: a = 687.8(2), c = 964.6(3) pm; As(CH₃)₄O₃: a = 708.6(1), c = 991.0(3) pm). As(CH₃)₄O₃ shows a displacive phase transition at ?135°C. The low temperature phase is orthorhombic (a = 715.8(7), b = 1 209(1), c = 943.3(1) pm).     

Natriumoxonitridometallate(VI) von Molybdän und Wolfram,Na4MO2N2 (M = Mo,W)

Sodium Oxonitridometallates(VI) of Molybdenum and Tungsten, Na₄MO₂N₂ (M = Mo, W) MoO₃ as well as WO₃ react with an excess of NaNH₂ in autoclaves at temperatures ranging from 250°C to 750°C to yield – in contrast to Ta₂O₅ [1] – oxonitridometallates of general composition Na₄MX₄ and other products like Na₅WO₄N [2]. The compounds decompose in moist air within minutes to Na₂WO₄, Na₂MoO₄ and Na₂MoO₄ · xH₂O, respectively. The structures of the Na₄MX₄ phases were determined from single crystal X-ray diffraction data. They crystallize triclinic in the Na₄CoO₄-type structure [3] P1 , Z = 2 with the following cell constants:      

Alternativ-Liganden. XXV. Neue Chelatliganden des Typs Me2ESiMe2(CH2)2E′Me2 (E=P,As; E′=N,P, As)

Alternative Ligands. XXV. New Chelating Ligands of the Type Me₂ESiMe₂(CH₂)₂E′Me₂ (E=P, As; E′=N, P, As) Chelating ligands of the type Me₂EsiMe₂(CH₂)₂E′ Me₂, have been prepared by the following routes: Starting from Me₂Si(Vi)Cl, the compounds with E=N and E′ =N ( 1 ), P ( 2 ), As ( 3 ) are obtained in yields of 65 to 78% by aminolysis to yield Me₂NSiMe₂Vi, followed by the LiE′ Me₂ catalyzed addition of He′Me₂ to the vinyl group. The intermediates ClSiMe₂(CH₂)E′Me₂ [E′=N ( 4 ), P ( 5 ), As ( 6 )] are produced by the reactions of 1 to 3 with PhPCl₂. 5 and 6 can be prepared in a purer form by the photochemical addition of HPMe₂ and HAsMe₂, respectively, to the vinyl group of Me₂Si(Vo)Cl. 4 to 6 react with LiEMe₂, in situ prepared from n-BuLi and HEMe₂, to yield the ligands Me₂ESiMe₂(CH₂)₂E′Me₂ ( 7–12 ) (E=P, As; E′=N, P, As). The new compounds have been characterized by analytical and spectroscopic investigations (NMR, MS).     

Characterization of wet‐etched GaAs (100) surfaces

To enable the use of GaAs‐based devices as chemical sensors, their surfaces must be chemically modified. Reproducible adsorption of molecules in the liquid phase on the GaAs surfaces requires controlled etching procedures. Several analytical methods were applied, including Fourier transform infrared spectroscopy (FTIRS) in attenuated total reflection and multiple internal reflection mode (ATR/MIR), high‐resolution electron energy loss spectroscopy (HREELS), X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) for the analysis of GaAs (100) samples treated with different wet‐etching procedures. The assignment of the different features due to surface oxides present in the vibrational and XPS spectra was made by comparison with those of powdered oxides (Ga₂O₃, As₂O₃ and As₂O₅). The etching procedures here described, namely, those using low concentration HF solutions, substantially decrease the amount of arsenic oxides and aliphatic contaminants present in the GaAs (100) surfaces and completely remove gallium oxides. The mean thickness of the surface oxide layer drops from 1.6 nm in the raw sample to 0.1 nm after etching. However, in presence of light, water dissolution of arsenic oxides is enhanced, and oxidized species of gallium cover the surface. Copyright © 2005 John Wiley & Sons, Ltd.     

The novel arsenate Na4Co7−xAl2/3x(AsO4)6 (x = 1.37): crystal structure,charge‐distribution and bond‐valence‐sum investigations

The title compound, tetrasodium cobalt aluminium hexaarsenate, Na₄Co_7−xAl_2/3x(AsO₄)₆ (x = 1.37), is isostructural with K₄Ni₇(AsO₄)₆; however, in its crystal structure, some of the Co²⁺ ions are substituted by Al³⁺ in a fully occupied octahedral site (site symmetry 2/m) and a partially occupied tetrahedral site (site symmetry 2). A third octahedral site is fully occupied by Co²⁺ ions only. One of the two independent tetrahedral As atoms and two of its attached O atoms reside on a mirror plane, as do two of the three independent Na⁺ cations, all of which are present at half‐occupancy. The proposed structural model based on a careful investigation of the crystal data is supported by charge‐distribution (CHARDI) analysis and bond‐valence‐sum (BVS) calculations. The correlation between the X‐ray refinement and the validation results is discussed.     

M+M3+2As(HAsO4)6 and α‐ and β‐M+M3+(HAsO4)2 (M+M3+ = RbAl or CsFe): six new compounds crystallizing in three closely related structure types

The crystal structures of hydrothermally synthesized (T = 493 K, 7–9 d) rubidium aluminium bis[hydrogen arsenate(V)], RbAl(HAsO₄)₂, caesium iron bis[hydrogen arsenate(V)], CsFe(HAsO₄)₂, rubidium dialuminium arsenic(V) hexakis[hydrogen arsenate(V)], RbAl₂As(HAsO₄)₆, and caesium diiron arsenic(V) hexakis[hydrogen arsenate(V)], CsFe₂As(HAsO₄)₆, were solved by single‐crystal X‐ray diffraction. The four compounds with the general formula M⁺M³⁺(HAsO₄)₂ adopt the RbFe(HPO₄)₂ structure type (Rc) and a closely related new structure type, which is characterized by a different stacking order of the building units, leading to noncentrosymmetric space‐group symmetry R32. The second new structure type, with the general formula M⁺M³⁺₂As(HAsO₄)₆ (Rc), is also a modification of the RbFe(HPO₄)₂ structure type, in which one third of the M³⁺O₆ octahedra are replaced by AsO₆ octahedra, and two thirds of the voids in the structure, which are usually filled by M⁺ cations, remain empty to achieve charge balance.     

Zur Bildung von Arsenatphosphaten Pb[H2(As,P)O4]2 und PbH(As,P)O4 und zur Verteilung von As und P auf die Anionenpositionen im Pb[H2(As,P)O4]2

On Formation of Arsenatephosphates Pb[H₂(As, P)O₄]₂ and PbH(As, P)O₄ and the Distribution of As and P at the Anion Positions in Pb[H₂(As, P)O₄]₂ Arsenatephosphates Pb[H₂(As, P)O₄]₂ and PbH(As, P)O₄ were prepared and characterized by chemical analysis and X-ray investigations. The observed linear dependence between unit cell parameters and the As/P-contents points to the existence of a complete range of mixed crystals as well between Pb(H₂PO₄)₂ and Pb(H₂AsO₄)₂ as between PbHPO₄ and PbHAsO₄. The occupation of the anion sites in Pb[H₂(As, P)O₄]₂ by AsO₄ and PO₄ has been determined by X-ray structure analysis. The calculated occupation factors and the mean bond distances in the anions of the two sites showed, that there exists a slight preference for As to go into site P, As(1).     

Zur Strukturchemie der Alkyl- und Arylhalogenoarsenate(III), [Me2As2Cl5]–, [RAsCl3]–, [R2As2Br6]2– (R = Me,Et, Ph) und [Ph2AsX2]– (X = Cl,Br)

Structural Chemistry of the Alkyl- and Arylhaloarsenates(III) [Me₂As₂Cl₅]^–, [RAsCl₃]^–, [R₂As₂Br₆]^2– (R = Me, Et, Ph) and [Ph₂AsX₂]^– (X = Cl, Br) The alkyl- and arylhaloarsenates(III) [Ph₄P][Me₂As₂Cl₅] ( 1 ), [Ph₄P][RAsCl₃] (R = Me, Et, Ph, 2 – 4 ), [Me₃PhN][PhAsCl₃] ( 5 ), [Ph₄P]₂[R₂As₂Br₆] (R = Me, Et, Ph, 6 – 8 ), [n-Pr₄N][Ph₂AsCl₂] ( 9 ) and [n-Bu₄N][Ph₂AsBr₂] ( 10 ) have been prepared and their structures established by X-ray diffraction. In contrast to the chloroarsenates(III) 2 – 5 , which all contain isolated ψ-trigonal bipyramidal anions [RAsCl₃]^–, the analogous bromoarsenates(III) 6 – 8 exhibit dimeric structures. Whereas the trans sited As–Cl distances in 2 and 3 are very similar a pronounced degree of asymmetry is apparent for the Cl–As–Cl three-centre bonds in 4 and 5 [2.396(1) and 2.602(1) Å in 5]. In 6 and 7 C_i symmetry related RAsBr₂ units are connected through long As…Br bonds [2.926(1) and 3.116(2) Å in 6 ]. The bromophenylarsenate(III) anion of 8 which contains two effectively undistorted ψ-trigonal bipyramids [PhAsBr₃]^– associated by weak As…Br interactions [3.117(2) Å]. In view of its very long bridging As…Cl distances the [Me₂As₂Cl₅]^– anion in 1 can, as 6 an 7 , be regarded as two MeAsCl₂ molecules weakly linked through a chloride ion.     

Electrochemical Biosensor for the Detection of Interaction Between Arsenic Trioxide and DNA Based on Guanine Signal

The interaction of arsenic trioxide (As₂O₃) with calf thymus double‐stranded DNA (dsDNA), calf thymus single‐stranded DNA (ssDNA) and also 17‐mer short oligonucleotide (Probe A) was studied electrochemically by using differential pulse voltammetry (DPV) with carbon paste electrode (CPE) at the surface and also in solution. Potentiometric stripping analysis (PSA) was employed to monitor the interaction of As₂O₃ with dsDNA in solution phase by using a renewable pencil graphite electrode (PGE). The changes in the experimental parameters such as the concentration of As₂O₃, and the accumulation time of As₂O₃ were studied by using DPV; in addition, the reproducibility data for the interaction between DNA and As₂O₃ was determined by using both electrochemical techniques. After the interaction of As₂O₃ with dsDNA, the DPV signal of guanine was found to be decreasing when the accumulation time and the concentration of As₂O₃ were increased. Similar DPV results were also found with ssDNA and oligonucleotide. PSA results observed at a low DNA concentration such as 1 ppm and a different working electrode such as PGE showed that there could be damage to guanine bases. The partition coefficients of As₂O₃ after interaction with dsDNA and ssDNA in solution by using CPE were calculated. Similarly, the partition coefficients (PC) of As₂O₃ after interaction with dsDNA in solution was also calculated by PSA at PGE. The features of this proposed method for the detection of DNA damage by As₂O₃ are discussed and compared with those methods previously reported for the other type of DNA targeted agents in the literature.