Biocompatible and antibacterial hydrogels have received increasing attention for preventing local bacterial infections. In this study, a type of polysaccharide hydrogels is prepared via the Schiff‐based reaction at physiological conditions. The gelation time and mechanical property of the hydrogels are found to be dependent on the polysaccharide concentration and the polysaccharide weight ratio. 3‐(4,5‐Dimethyl‐thiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide assay and live/dead assay indicate that the hydrogels display nontoxicity in vitro. After subcutaneous injection into rats, the hydrogels exhibit an acceptable biocompatibility in vivo. Furthermore, the bacterial inhibition tests by shaking flask method and agar disc‐diffusion method demonstrate that the ceftriaxone‐sodium‐loaded hydrogels have remarkable antibacterial properties in vitro. The in vivo anti‐infective tests further display that the antibiotic‐loaded hydrogels display excellent anti‐infective efficacies in both superficial and deep tissue infection. Consequently, the injectable and biocompatible polysaccharide hydrogels may serve as promising platforms for localized, sustained delivery of antibiotics for preventing local infections.
Aggregation is frequently encountered during coating nanoparticles, especially when the core is not solid and the coating polyelectrolytes are weak. Here, the coating of a nanoliposome with two weak polyelectrolytes, alginate and chitosan, is investigated. First, quartz crystal microbalance with dissipation, atomic force microscopy, scanning electron microscopy, and energy dispersive spectroscopy analyses confirm the feasibility of firm adsorption of up to 16 layers of weak polyelectrolytes to the liposomal surface. Titrations are then performed to identify the lowest amounts of polyelectrolytes required to make eight saturated coating layers using the washless method. Significantly improved yields and reproducibility (almost 100%) are achieved, in addition to control over layer thickness. Attenuated total reflectance Fourier transform infrared spectroscopy studies confirm the success of layering. This is special since scientists always attempt to reduce nanoparticle aggregation by substituting the soft core, using one strong polyelectrolyte, or contending with lower yields or numbers of coating layers.
Electrospinning is here used for the first time to prepare nanofibers including a host/guest complex in a keratin/poly(ethylene oxide) matrix. The host is a lipid binding protein and the guest is an insoluble bactericidal molecule, irgasan, bound within the protein internal cavity. The obtained nanofibers, characterized by scanning electron microscopy, exhibit excellent antibacterial activity toward Gram positive and negative bacteria, even with a moderate protein/irgasan cargo. Solution NMR studies, employed to provide molecular information on the cargo system, points to a micromolar affinity, compatible with both the electrospinning process and slow guest release. The versatility of the carrier protein, capable of interacting with a variety of druggable hydrophobic molecules, is exploitable for the development of innovative biomedical devices, whose properties can be tuned by the selected guest.
Cell sorting is important for cell biology and regenerative medicine. A visible light‐responsive cell scaffold is produced using gold nanoparticles and collagen gel. Various kinds of cells are cultured on the visible light‐responsive cell scaffold, and the target cells are selectively detached by photoirradiation without any cytotoxicity. This is a new image‐guided cell sorting system.
Biocompatible polymeric coatings for metallic stents are desired, as currently used materials present limitations such as deformation during degradation and exponential loss of mechanical properties after implantation. These concerns, together with the present risks of the drug‐eluting stents, namely, thrombosis and restenosis, require new materials to be studied. For this purpose, novel poly(polyol sebacate)‐derived polymers are investigated as coatings for metallic stents. All pre‐polymers reveal a low molecular weight between 3000 and 18 000 g mol?1. The cured polymers range from flexible to more rigid, with E‐modulus between 0.6 and 3.8 MPa. Their advantages include straightforward synthesis, biodegradability, easy processing through different scaffolding techniques, and easy transfer to industrial production. Furthermore, electrospraying and dip‐coating procedures are used as proof‐of‐concept to create coatings on metallic stents. Biocompatibility tests using adipose stem cells lead to promising results for the use of these materials as coatings for metallic coronary stents.
A gold standard for esophagus reconstruction is not still available. The present work aims to design a polymer patch combining synthetic polylactide‐co‐polycaprolacton and chitosan biopolymers, tailoring patch properties to esophageal tissue characteristics by a temperature‐induced precipitation method, to get multilayered patches (1L, 2L, and 3L). Characterization shows stable multilayered patches (1L and 2L) by selection of copolymer type, and their M w. In vitro investigation of the functional patch properties in simulated physiologic and pathologic conditions demonstrates that the chitosan layer (patch 3L) decreases patch stability and cell adhesion, while improves cell proliferation. Patches 2L and 3L comply with physiological esophageal pressure (3–5 kPa) and elongation (20%).
This article reports the behavior of embryonic neural stem cells on a hydrogel that combines cationic, non‐specific cell adhesion motifs with glycine‐arginine‐glycine‐aspartic acid‐serine‐phenylalanine (GRGDSF)‐peptides as specific cell adhesion moieties. Therefore, three hydrogels are prepared by free radical polymerization that contains either a GRGDSF‐peptide residue ( P1 ), amino ethylmethacrylate as a cationic residue ( P2 ), or a combination of both motifs ( P3 ). For each gel, cross linker concentrations of 8 mol% is used to have a comparable gel stiffness of 8–9 kPa. The cell experiments indicate a synergistic effect of the non‐specific, cationic residues, and the specific GRGDSF‐peptides on embryonic neural stem cell behavior that is especially pronounced in the cell adhesion experiments by more than doubling the number of cells after 72 h when comparing P3 with P2 and is less pronounced in the proliferation and differentiation experiments.
Intermediate filaments constitute a class of biopolymers whose function is still poorly understood. One example for such intermediate filaments is given by neurofilaments, large macromolecules that fill the axon of neurons. Here, reconstituted networks of purified porcine neurofilaments are studied and the diffusion behavior of different nanoparticles in the biopolymer network is evaluated. A strong dependence of particle diffusion on the charge state of the particles, and – for liposomes – also on the fatty acid configuration of lipids is observed. The results suggest that both electrostatic and hydrophobic interactions contribute to nanoparticle trapping in neurofilament networks, and that the latter is enabled by lipids with an inverted cone geometry which grant access to the hydrophobic core of the liposome shell.
A new approach to stabilize carbon nanotubes (CNTs) in aqueous solution with a reduction‐responsive water‐soluble polymer is reported. The novel polymer synthesized by a controlled radical polymerization is functionalized with pendant pyrene groups capable of adhering to the surface of CNTs through π–π noncovalent interactions, and labeled with disulfide linkages to exhibit reduction‐responsive cleavage. Upon the cleavage of junction disulfide linkages in a reducing environment, water‐soluble polymers are shed, retaining clean CNT surfaces for electrochemical catalytic reactions.
The phase behavior of a dendritic amphiphile containing a Newkome‐type dendron as the hydrophilic moiety and a cholesterol unit as the hydrophobic segment is investigated at the air–liquid interface. The amphiphile forms stable monomolecular films at the air–liquid interface on different subphases. Furthermore, the mineralization of calcium phosphate beneath the monolayer at different calcium and phosphate concentrations versus mineralization time shows that at low calcium and phosphate concentrations needles form, whereas flakes and spheres dominate at higher concentrations. Energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy, and electron diffraction confirm the formation of calcium phosphate. High‐resolution transmission electron microscopy and electron diffraction confirm the predominant formation of octacalcium phosphate and hydroxyapatite. The data also indicate that the final products form via a complex multistep reaction, including an association step, where nano‐needles aggregate into larger flake‐like objects.
New macromolecules such as dendrimers are increasingly needed to drive breakthroughs in diverse areas, for example, healthcare. Here, the authors report hybrid antimicrobial dendrimers synthesized by functionalizing organometallic dendrimers with quaternary ammonium groups or 2‐mercaptobenzothiazole. The functionalization tunes the glass transition temperature and antimicrobial activities of the dendrimers. Electron paramagnetic resonance spectroscopy reveals that the dendrimers form free radicals, which have significant implications for catalysis and biology. In vitro antimicrobial assays indicate that the dendrimers are potent antimicrobial agents with activity against multidrug‐resistant pathogens such as methicillin‐resistant Staphylococcus aureus and vancomycin‐resistant Enterococcus faecium as well as other microorganisms. The functionalization increases the activity, especially in the quaternary ammonium group‐functionalized dendrimers. Importantly, the activities are selective because human epidermal keratinocytes cells and BJ fibroblast cells exposed to the dendrimers are viable after 24 h.
Inadequate drug loading of hydrophobic drugs is a classic problem when hydrogels are utilized as sustained‐release carriers of drugs. Herein, a strategy to load plenty of hydrophobic drugs is presented. The antitumor drug 10‐hydroxycamptothecin in the thermogel of poly(d ,l ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(d ,l ‐lactic acid‐co‐glycolic acid) is employed. The drug is soluble in an alkaline medium, yet insoluble in a neutral/acidic medium. The crystallization is triggered after adding an alkaline drug solution into an acidic copolymer solution. The concentrated copolymer aqueous solution undergoes a sol–gel transition upon heating, faster than the crystallization. As a result, plenty of evenly dispersed drug microcrystals are formed. The in vitro and in vivo experiments indicate both high drug loading and sustained release with enhanced antitumor efficacy and reduced adverse effects. The system resolves the challenge in formulation of hydrophobic drugs in hydrogels, and is stimulating for encapsulating drugs with a soluble‐insoluble transition into a material environment.
A polyzwitterion is synthesized by regioselective functionalization of cellulose possessing a uniform charge distribution. The positively charged ammonium group is present at position 6, while the negative charge of carboxylate is located at positions 2 and 3 of the repeating unit. The molecular structure of the biopolymer derivative is proved by NMR spectroscopy. This cellulose‐based zwitterion is applied to several support materials by spin‐coating and characterized by means of atomic force microscope, contact angle measurements, ellipsometry, and X‐ray photoelectron spectroscopy. The coatings possess antimicrobial activity depending on the support materials (glass, titanium, tissue culture poly(styrene)) as revealed by confocal laser scanning microscopy and live/dead staining.
Micromolding surface‐initiated polymerization enables the fabrication of polymer coatings that reproduce the microscale surface topography of superhydrophobic leaves onto solid supports. Here, the surfaces of superhydrophobic leaves from Trifolium repens and Aristolochia esperanzae are molded and reproduced as the topography of a partially fluorinated polymer coating through the surface‐initiated ring‐opening metathesis polymerization of 5‐(perfluorooctyl)norbornene (NBF8). The polymer coatings have thicknesses exceeding 100 μm, which can be tailored by the amount of monomer added to the mold. These coatings are robustly bound to the substrate, contain compositions not found in nature, and achieve superhydrophobicity that is comparable to the actual leaf.
Aggregation‐caused quenching (ACQ) is a general phenomenon that is faced by traditional fluorescent polymers. Aggregation‐induced emission (AIE) is exactly opposite to ACQ. AIE molecules are almost nonemissive in their molecularly dissolved state, but they can be induced to show high fluorescence in the aggregated or solid state. Incorporation of AIE phenomenon into polymer design has yielded various polymers with AIE characteristics. In this review, the recent progress of AIE polymers for biological applications is summarized.
Enzyme immobilization is of high interest for industrial applications. However, immobilization may compromise enzyme activity or stability due to the harsh conditions which have to be applied. The authors therefore present a new and improved crosslinked layer‐by‐layer (cLbL) approach. Two different model enzymes (acid phosphatase and β‐galactosidase) are immobilized under mild conditions on biocompatible, monodisperse, sub‐micrometer poly(lactide‐co‐glycolide) (PLGA) particles. The resulting PLGA enzyme systems are characterized regarding their size, surface charge, enzyme activity, storage stability, reusability, and stability under various conditions such as changing pH and temperature. The developed and characterized cLbL protocol can be easily adapted to different enzymes. Potential future uses of the technology for biomedical applications are discussed. PLGA‐enzyme particles are therefore injected into the blood circulation of zebrafish embryos in order to demonstrate the in vivo stability and activity of the designed system.
The rapid pace of development in biotechnology has placed great importance on controlling cell–material interactions. In practice, this involves attempting to decouple the contributions from adhesion molecules, cell membrane receptors, and scaffold surface chemistry and morphology, which is extremely challenging. Accordingly, a strategy is presented in which different chemical, biochemical, and morphological properties of 3D biomaterials are systematically varied to produce novel scaffolds with tuneable cell affinities. Specifically, cationized and surfactant‐conjugated proteins, recently shown to have non‐native membrane affinity, are covalently attached to 3D scaffolds of collagen or carboxymethyl‐dextran, yielding surface‐functionalized 3D architectures with predictable cell immobilization profiles. The artificial membrane‐binding proteins enhance cellular adhesion of human mesenchymal stem cells (hMSCs) via electrostatic and hydrophobic binding mechanisms. Furthermore, functionalizing the 3D scaffolds with cationized or surfactant‐conjugated myoglobin prevents a slowdown in proliferation of seeded hMSCs cultured for seven days under hypoxic conditions.
Herein, a kind of dual acid‐sensitive nanoparticles based on monomethoxy poly(ethylene glycol)‐imine‐β‐cyclodextrin is constructed by a facile phenylboronic acid‐cross‐linked way. The data of dynamic light scattering and transmission electron microscope reveal the cross‐linked nanoparticles have improved stability. The cross‐linked nanoparticles could easily self‐assemble and load the anticancer drug at neutral pH condition. However, when the drug‐loaded nanoparticles are delivered to extracellular tumor sites (pH ≈6.8), the surface of the nanoparticles would be amino positively charged and easily internalized by tumor cell due to the cleavage of the acid‐labile benzoic–imine. Subsequently, with the acidity in subcellular compartments significantly increasing (such as the endosome pH ≈5.3), the loaded drug would fast release from the endocytosis carriers due to the hydrolysis of boronate ester. These features suggest that these dual acid‐sensitive cross‐linked nanoparticles not only possess excellent biocompatibility but also can efficiently load and deliver anticancer drug into tumor cells to enhance the inhibition of cellular proliferation, outlining a favorable platform as drug carriers.
A nanoassembled drug delivery system for anticancer treatment, formed by the host–guest interactions between paclitaxel (PTX) and β‐cyclodextrin (β‐CD) modified poly(acrylic acid) (PCDAA), is successfully prepared. After such design, the aqueous solubility of PTX is greatly increased from 0.34 to 36.02 μg mL?1, and the obtained PCDAA‐PTX nanoparticles (PCDAA‐PTX NPs) exhibit a sustained PTX release behavior in vitro. In vitro cytotoxicity finds that PCDAA‐PTX NPs can accumulate significantly in tumor cells and remain the pharmacological activity of PTX. The in vivo real‐time biodistribution of PCDAA‐PTX NPs is investigated using near‐infrared fluorescence imaging, indicating that the PCDAA‐PTX NPs can effectively target to the tumor site by the enhanced permeability and retention effect in H22 tumor‐bearing mice. Through in vivo antitumor examination, PCDAA‐PTX NPs exhibit superior efficacy in impeding the tumor growth compared to the commercially available Taxol®.
Fractal colloids, which find applications in the preparation of advanced materials, are currently synthesized by means of a multistep procedure that yields a low solids content dispersion. This is not well suited for certain applications such as superhydrophobic coatings. In this work, a one‐step method for the synthesis of higher solids content waterborne fractal polymer dispersions is presented and it is shown that the surfaces obtained from the fractal dispersions are superhydrophobic (contact angle, θ > 150°) which is beyond the current waterborne coating technology (θ = 130°–137°). This opens the possibility for the large‐scale production of waterborne superhydrophobic coatings.
下载免费PDF全文