Incorporation of nanohydroxyapatite and vitamin D3 into electrospun PCL/Gelatin scaffolds: The influence on the physical and chemical properties and cell behavior for bone tissue engineering

Scaffold, an essential element of tissue engineering, should provide proper physical and chemical properties and evolve suitable cell behavior for tissue regeneration. Polycaprolactone/Gelatin (PCL/Gel)‐based nanocomposite scaffolds containing hydroxyapatite nanoparticles (nHA) and vitamin D3 (Vit D3) were fabricated using the electrospinning method. Structural and mechanical properties of the scaffold were determined by scanning electron microscopy (SEM) and tensile measurement. In this study, smooth and bead‐free morphology with a uniform fiber diameter and optimal porosity level with appropriate pore size was observed for PCL/Gel/nHA nanocomposite scaffold. The results indicated that adding nHA to PCL/Gel caused an increase of the mechanical properties of scaffold. In addition, chemical interactions between PCL, gelatin, and nHA molecules were shown with XRD and FT‐IR in the composite scaffolds. MG‐63 cell line has been cultured on the fabricated composite scaffolds; the results of viability and adhesion of cells on the scaffolds have been confirmed using MTT and SEM analysis methods. Here in this study, the culture of the osteoblast cells on the scaffolds showed that the addition of Vit D3 to PCL/Gel/nHA scaffold caused further attachment and proliferation of the cells. Moreover, DAPI staining results showed that the presence and viability of the cells were greater in PCL/Gel/nHA/Vit D3 scaffold than in PCL/Gel/nHA and PCL/Gel scaffolds. The results also approved increasing cell proliferation and alkaline phosphatase (ALP) activity for MG‐63 cells cultured on PCL/Gel/nHA/Vit D3 scaffold. The results indicated superior properties of hydroxyapatite nanoparticles and vitamin D3 incorporated in PCL/Gel scaffold for use in bone tissue engineering.     

Characterization of Retinal Pigment Epithelial Melanin and Degraded Synthetic Melanin Using Mass Spectrometry and In Vitro Biochemical Diagnostics

With increasing age, there is an observable loss of melanin in retinal pigment epithelial (RPE) cells. It is possible that degradation of the pigment contributes to the pathogenesis of retinal disease, as the cellular antioxidant material is depleted. Functionally, intact melanin maintains protective qualities, while oxidative degradation of melanin promotes reactive oxygen species (ROS) generation and formation of metabolic byproducts, such as melanolipofuscin. Understanding the structural and functional changes to RPE melanin with increasing age may contribute to a better understanding of disease progression and risk factors for conditions such as age‐related macular degeneration (AMD). In this study, human donor RPE melanin is characterized using MALDI mass spectrometry to follow melanin degradation trends. In vitro models using ARPE‐19 cells are used to assess photo‐reactivity in repigmented cells. Significant protection against intracellular ROS produced by blue light is observed in calf melanin‐pigmented cells versus unpigmented and black latex bead controls (P < 0.0001). UV‐B exposure to aged human melanin‐pigmented cells results in a significant increase in nitric oxide production versus control cells (P < 0.001). Peroxide‐treated synthetic melanin is characterized to elucidate degradation products that may contribute to RPE cell damage.     

Curcumin‐loaded biodegradable polyurethane scaffolds modified with gelatin using 3D printing technology for cartilage tissue engineering

We described the curcumin‐loaded biodegradable polyurethane (PU) scaffolds modified with gelatin based on three‐dimensional (3D) printing technology for potential application of cartilage regeneration. The printing solution of poly(ε‐caprolactone) (PCL) triol (polyol) and hexamethylene diisocyanate (HMDI) in 2,2,2‐trifluoroethanol was printed through a nozzle in dimethyl sulfoxide phase with or without gelatin. The weight ratio of HMDI against PCL triol was varied as 3, 5, and 7 in order to evaluate its effect on the mechanical properties and biodegradation rate. A higher ratio of HMDI resulted in higher mechanical properties and a lower biodegradation rate. The use of gelatin increased the mechanical properties, biodegradation rate, and curcumin release due to the surface cross‐linking, nanoporous structure, and surface hydrophilicity of the scaffolds. In vitro study revealed that the released curcumin enhanced the proliferation and differentiation of chondrocyte. The 3D‐printed biodegradable PU scaffold modified with gelatin should thus be considered as a potential candidate for cartilage regeneration.     

Mitochondria-derived reactive oxygen species mediate blue light-induced death of retinal pigment epithelial cells

Throughout the lifetime of an individual, light is focused onto the retina. The resulting photooxidative stress can cause acute or chronic retinal damage. The pathogenesis of age-related macular degeneration (AMD), the leading cause of legal blindness in the developed world, involves oxidative stress and death of the retinal pigment epithelium (RPE) followed by death of the overlying photoreceptors. Evidence suggests that damage due to exposure to light plays a role in AMD and other age-related eye diseases. In this work a system for light-induced damage and death of the RPE, based on the human ARPE-19 cell line, was used. Induction of mitochondria-derived reactive oxygen species (ROS) is shown to play a critical role in the death of cells exposed to short-wavelength blue light (425 +/- 20 nm). ROS and cell death are blocked either by inhibiting the mitochondrial electron transport chain or by mitochondria-specific antioxidants. These results show that mitochondria are an important source of toxic oxygen radicals in blue light-exposed RPE cells and may indicate new approaches for treating AMD using mitochondria-targeted antioxidants.     

Fabrication of Stiffness Gradients of GelMA Hydrogels Using a 3D Printed Micromixer

Many properties in both healthy and pathological tissues are highly influenced by the mechanical properties of the extracellular matrix. Stiffness gradient hydrogels are frequently used for exploring these complex relationships in mechanobiology. In this study, the fabrication of a simple, cost‐efficient, and versatile system is reported for creation of stiffness gradients from photoactive hydrogels like gelatin‐methacryloyl (GelMA). The setup includes syringe pumps for gradient generation and a 3D printed microfluidic device for homogenous mixing of GelMA precursors with different crosslinker concentration. The stiffness gradient is investigated by using rheology. A co‐culture consisting of human adipose tissue‐derived mesenchymal stem cells (hAD‐MSCs) and human umbilical cord vein endothelial cells (HUVECs) is encapsulated in the gradient construct. It is possible to locate the stiffness ranges at which the studied cells displayed specific spreading morphology and migration rates. With the help of the described system, variable mechanical gradient constructs can be created and optimal 3D cell culture conditions can be experientially identified.     

Gelatin‐based photopolymers for bone replacement materials

Gelatin‐based monomers were considered as suitable base component for the 3D structuring of potential bone replacement materials by stereolithographic techniques. Different methacrylate‐based gelatin derivatives were prepared, whereas a polyethylene glycol modified derivative GP4M turned out to have the highest tolerance toward other monomers. These are essential as they allow the tuning of the photoreactivity and the mechanical properties. Cell culture experiments with osteoblast‐ and endothelial‐like cells confirmed negligible cytotoxicity of these monomers. Finally, we were able to show the possibility of producing arbitrary cellular structures with these gelatin‐containing formulations using stereolithography. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

3D Microfibrous Scaffolds Selectively Promotes Proliferation and Glial Differentiation of Adult Neural Stem Cells: A Platform to Tune Cellular Behavior in Neural Tissue Engineering

Biomaterials are essential for the development of innovative biomedical and therapeutic applications. Biomaterials‐based scaffolds can influence directed cell differentiation to improve cell‐based strategies. Using a novel microfluidics approach, poly (ε‐caprolactone) (PCL), is used to fabricate microfibers with varying diameters (3–40 µm) and topographies (straight and wavy). Multipotent adult rat hippocampal stem/progenitor cells (AHPCs) are cultured on 3D aligned PCL microfibrous scaffolds to investigate their ability to differentiate into neurons, astrocytes, and oligodendrocytes. The results indicate that the PCL microfibers significantly enhance proliferation of the AHPCs compared to control, 2D planar substrates. While the AHPCs maintained their multipotent differentiation capacity when cultured on the PCL scaffolds, there is a significant and dramatic increase in immunolabeling for astrocyte and oligodendrocyte differentiation when compared with growth on planar surfaces. Our results show a 3.5‐fold increase in proliferation and 23.4‐fold increase in astrocyte differentiation for cells on microfibers. Transplantation of neural stem/progenitor cells within a PCL microfiber scaffold may provide important biological and topographic cues that facilitate the survival, selective differentiation, and integration of transplanted cells to improve therapeutic strategies.     

Bruch’s-Mimetic Nanofibrous Membranes Functionalized with the Integrin-Binding Peptides as a Promising Approach for Human Retinal Pigment Epithelium Cell Transplantation

Background: This study aimed to develop an ultrathin nanofibrous membrane able to, firstly, mimic the natural fibrous architecture of human Bruch’s membrane (BM) and, secondly, promote survival of retinal pigment epithelial (RPE) cells after surface functionalization of fibrous membranes. Methods: Integrin-binding peptides (IBPs) that specifically interact with appropriate adhesion receptors on RPEs were immobilized on Bruch’s-mimetic membranes to promote coverage of RPEs. Surface morphologies, Fourier-transform infrared spectroscopy spectra, contact angle analysis, Alamar Blue assay, live/dead assay, immunofluorescence staining, and scanning electron microscopy were used to evaluate the outcome. Results: Results showed that coated membranes maintained the original morphology of nanofibers. After coating with IBPs, the water contact angle of the membrane surfaces varied from 92.38 ± 0.67 degrees to 20.16 ± 0.81 degrees. RPE cells seeded on IBP-coated membranes showed the highest viability at all time points (Day 1, p < 0.05; Day 3, p < 0.01; Days 7 and 14, p < 0.001). The proliferation rate of RPE cells on uncoated poly(ε-caprolactone) (PCL) membranes was significantly lower than that of IBP-coated membranes (p < 0.001). SEM images showed a well-organized hexa/polygonal monolayer of RPE cells on IBP-coated membranes. RPE cells proliferated rapidly, contacted, and became confluent. RPE cells formed a tight adhesion with nanofibers under high-magnification SEM. Our findings confirmed that the IBP-coated PCL membrane improved the attachment, proliferation, and viability of RPE cells. In addition, in this study, we used serum-free culture for RPE cells and short IBPs without immunogenicity to prevent graft rejection and immunogenicity during transplantation. Conclusions: These results indicated that the biomimic BM-IBP-RPE nanofibrous graft might be a new, practicable approach to increase the success rate of RPE cell transplantation.     

Mass spectrometry imaging of endogenous metabolites in response to doxorubicin in a novel 3D osteosarcoma cell culture model

Three‐dimensional (3D) cell culture is a rapidly emerging field, which mimics some of the physiological conditions of human tissues. In cancer biology, it is considered a useful tool in predicting in vivo chemotherapy responses, compared with conventional two‐dimensional (2D) cell culture. We have developed a novel 3D cell culture model of osteosarcoma composed of aggregated proliferative tumour spheroids, which shows regions of tumour heterogeneity formed by aggregated spheroids of polyclonal tumour cells. Aggregated spheroids show local necrotic and apoptotic regions and have sizes suitable for the study of spatial distribution of metabolites by mass spectrometry imaging (MSI). We have used this model to perform a proof‐of‐principle study showing a heterogeneous distribution of endogenous metabolites that colocalise with the necrotic core and apoptotic regions in this model. Cytotoxic chemotherapy (doxorubicin) responses were significantly attenuated in our 3D cell culture model compared with those of standard cell culture, as determined by resazurin assay, despite sufficient doxorubicin diffusion demonstrated by localisation throughout the 3D constructs. Finally, changes to the distribution of endogenous metabolites in response to doxorubicin were readily detected by MSI. Principal component analysis identified 50 metabolites which differed most in their abundance between treatment groups, and of these, 10 were identified by both in‐software t test and mixed‐effects analysis of variance (ANOVA). Subsequent independent MSIs of identified species were consistent with principle component analysis findings. This proof‐of‐principle study shows for the first time that chemotherapy‐induced changes in metabolite abundance and distribution may be determined in 3D cell culture by MSI, highlighting this method as a potentially useful tool in the elucidation of chemotherapy responses as an alternative to in vivo testing.     

Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: a preliminary study for vascular graft development

Tissue engineering offers the potential of providing vessels that can be used to replace diseased and damaged native blood vessels. The endothelization of a synthetic vascular graft minimizes the failures associated with blood clotting and platelet activation. The aim of this study was to culture vascular-derived endothelial and smooth muscle cells on both untreated and NaOH-treated poly(epsilon-caprolactone) (PCL) films, a biocompatible and bio-resorbable polymer, and to evaluate the behavior of both cell types as a preliminary study for vascular graft development. PCL films were prepared by hot pressing; characterized by DSC, IR, SEM, and scanning force microscopy; and treated with NaOH to increase the surface hydrophilicity before cell culture. Endothelial and smooth muscle cells, isolated from pig cava vein, were characterized by immunofluorescence and confocal microscopy studies of endothelial nitric oxide synthase and alpha-smooth muscle actin. Good adhesion, growth, viability and morphology of both the endothelial and smooth muscle cells on PCL films were obtained, but a light stimulation of mitochondrial activity was observed during short culture times. NaOH treatment improved the adhesion and enhanced the proliferation in both cell types. This verified the possible use of this modified polymer as a support in the preparation of a synthetic vascular graft. [Diagram: see text] SEM micrograph of smooth muscle cells cultured on NaOH-treated PCL film. (Original magnification: 1000x).     

Double‐layered composite nanofibers and their mechanical performance

Continuous polymer nanofibers are available through electrospinning, but most have the same structure in their cross section. This article focuses on the fabrication and the structural and mechanical characterization of pencil‐like double‐layered composite nanofibers coaxially electrospun from solutions of two different biodegradable materials, i.e., gelatin and poly(ε‐caprolactone) (PCL). Transmission electron microscopy and water contact angle measurements confirmed that a gelatin inner fiber was wrapped with a PCL outer layer. Possible applications of such nanofibers include a controlled degradation rate when used as a medical device in human body. It has been found that the tensile performance of the composite nanofibers was better than those of both the pure constituent, i.e. gelatin and PCL, nanofibers alone. The ultimate strength and ultimate strain of the composite nanofibers with 7.5% w/v gelatin in the core and 10% w/v PCL as shell were at least 68% and 244% higher, respectively, than those of the same concentration pure gelatin and PCL nanofibers. Thus, a coaxial electrospinning technique as used in this article can be applicable, not only in developing functionalized nanofibers but also in elevating their mechanical property. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2852–2861, 2005     

Hydrogel microfluidic co‐culture device for photothermal therapy and cancer migration

We developed the photo‐crosslinkable hydrogel microfluidic co‐culture device to study photothermal therapy and cancer cell migration. To culture MCF7 human breast carcinoma cells and metastatic U87MG human glioblastoma in the microfluidic device, we used 10 w/v% gelatin methacrylate (GelMA) hydrogels as a semi‐permeable physical barrier. We demonstrated the effect of gold nanorod on photothermal therapy of cancer cells in the microfluidic co‐culture device. Interestingly, we observed that metastatic U87MG human glioblastoma largely migrated toward vascular endothelial growth factor (VEGF)‐treated GelMA hydrogel‐embedding microchannels. The main advantage of this hydrogel microfluidic co‐culture device is to simultaneously analyze the physiological migration behaviors of two cancer cells with different physiochemical motilities and study gold nanorod‐mediated photothermal therapy effect. Therefore, this hydrogel microfluidic co‐culture device could be a potentially powerful tool for photothermal therapy and cancer cell migration applications.     

Alkali‐Mediated Miscibility of Gelatin/Polycaprolactone for Electrospinning Homogeneous Composite Nanofibers for Tissue Scaffolding

Electrospun natural‐synthetic composite nanofibers, which possess favorable biological and mechanical properties, have gained widespread attention in tissue engineering. However, the development of biomimetic nanofibers of hybrids remains a huge challenge due to phase separation of the polymer blends. Here, aqueous sodium hydroxide (NaOH) solution is proposed to modulate the miscibility of a representative natural‐synthetic hybrid of gelatin (GT) and polycaprolactone (PCL) for electrospinning homogeneous composite nanofibers. Alkali‐doped GT/PCL solutions and nanofibers examined at macroscopic, microscopic, and internal molecular levels demonstrate appropriate miscibility of GT and PCL after introducing the alkali dopant. Particularly, homogeneous GT/PCL nanofibers with smooth surface and uniform diameter are obtained when aqueous NaOH solution with a concentration of 10 m is used. The fibers become more hydrophilic and possess improved mechanical properties both in dry and wet conditions. Moreover, biocompatibility experiments show that stem cells adhere to and proliferate better on the alkali‐modified nanofibers than the untreated one. This study provides a facile and effective approach to solve the phase separation issue of the synthetic‐natural hybrid GT/PCL and establishes a correlation of compositionally and morphologically homogeneous composite nanofibers with respect to cell responses.     

OT-674 suppresses photooxidative processes initiated by an RPE lipofuscin fluorophore

The pathological processes involved in age-related macular degeneration (AMD) include retinal pigment epithelial (RPE) cell degeneration; oxidative mechanisms likely contribute to the demise of these cells. Indeed, RPE cells may be particularly susceptible to photooxidative mechanisms since they accumulate retinoid-derived photoreactive compounds that constitute the lipofuscin of the cell. Thus we undertook to test the capacity of OT-674, the reduction product (Tempol-H) of the nitroxide Tempol, to suppress photooxidative processes initiated by the RPE lipofuscin fluorophore A2E. Accordingly, when ARPE-19 cells that had accumulated A2E were irradiated at 430 nm, pretreatment with OT-674 (0.01-10 mM) was found to confer a resistance to cell death. Monitoring by quantitative HPLC also showed that OT-674 reduced A2E photooxidation in a cell-free system. Moreover, when presented with a singlet oxygen generator, OT-674 served as a quencher of singlet oxygen that was more effective than Trolox and alpha-tocopherol. We conclude that OT-674 is a potent antioxidant that suppresses photooxidative processes generated in cultured RPE cells by the lipofuscin fluorophore A2E. As oxidative damage to RPE cells is considered to be a risk factor for AMD, antioxidant therapy with OT-674 may serve a protective role.     

Controlling the Poly(ε‐caprolactone) Degradation to Maintain the Stemness and Function of Adipose‐Derived Mesenchymal Stem Cells in Vascular Regeneration Application

Biodegradable poly(ε‐caprolactone) (PCL) scaffolds with adipose‐derived mesenchymal stem cells (ADSCs) have been used in vascular regeneration studies. An evaluation method of the effect of PCL degradation products (DP) on the viability, stemness, and differentiation capacities of ADSCs is established. ADSCs are cultured in medium containing different concentrations of PCL DP before evaluating the effect of PCL DP on the cell apoptosis and proliferation, cell surface antigens, adipogenic and osteogenic differentiation capacities, and capacities to differentiate into endothelial cells and smooth muscle cells. The results demonstrate that PCL DP exceed 0.05 mg mL^?1 may change the stemness and differentiation capacities of ADSCs. Therefore, to control the proper concentration of PCL DP is essential for ADSCs in vascular regeneration application.     

The Development of Genipin‐Crosslinked Poly(caprolactone) (PCL)/Gelatin Nanofibers for Tissue Engineering Applications

Composite nanofibers of poly(caprolactone) (PCL) and gelatin crosslinked with genipin are prepared. The contact angles and mechanical properties of crosslinked PCL‐gelatin nanofibers decrease as the gelatin content increases. The proliferation of myoblasts is higher in the crosslinked PCL‐gelatin nanofibers than in the PCL nanofibers, and the formation of myotubes is only observed on the crosslinked PCL‐gelatin nanofibers. The expression level of myogenin, myosin heavy chain, and troponin T genes is increased as the gelatin content is increased. The results suggest that PCL‐gelatin nanofibers crosslinked with genipin can be used as a substrate to modulate proliferation and differentiation of myoblasts, presenting potential applications in muscle tissue engineering.

     

d‐Fructose Modification Enhanced Internalization of Mixed Micelles in Breast Cancer Cells via GLUT5 Transporters

d ‐Fructose modified poly(ε‐caprolactone)‐polyethylene glycol (PCL‐PEG‐Fru) diblock amphiphile is synthesized via Cu(I)‐catalyzed click chemistry, which self‐assembles with D‐α‐tocopheryl polyethylene glycol 1000 succinate (TPGS) into PCL‐PEG‐Fru/TPGS mixed micelles (PPF MM). It has been proven that glucose transporter (GLUT)5 is overexpressed in MCF‐7 cells other than L929 cells. In this study, PPF MM exhibit a significantly higher uptake efficiency than fructose‐free PCL‐PEG‐N₃/TPGS mixed micelles in both 2D MCF‐7 cells and 3D tumor spheroids. Also, the presence of free d ‐fructose competitively inhibits the internalization of PPF MM in MCF‐7 cells other than L929 cells. PPF MM show selective tumor accumulation in MCF‐7 breast tumor bearing mice xenografts. Taken together, PPF MM represent a promising nanoscale carrier system to achieve GLUT5‐mediated cell specific delivery in cancer therapy.

     

Understanding Behavior of Polycaprolactone–Gelatin Blends under High Pressure CO<Subscript>2</Subscript>

Polycaprolactone (PCL) is widely used in biomedical applications as electrospun fibers or porous foams. As PCL is synthetic polymer, many researchers have explored blends of PCL–gelatin to combine mechanical and bioactive properties of individual components. High pressure carbon dioxide (CO2) has been studied to foam and impregnate many biocompatible polymers. In case of PCL–gelatin blends, certain compositions can be swelled reversibly under high pressure CO₂ without permanent deformation. This allows successful impregnation of PCL–gelatin blends under CO₂. This study summarizes effect of different treatments adopted during impregnation process including high pressure CO2 on several blend compositions of PCL–gelatin blends. Stress relaxation, polymer melting and dissolution were observed during several treatments which affects porosity and scaffold structure significantly. Results summarized in this study will aid in optimum selection of PCL–gelatin blend composition for biomedical applications. Furthermore, CO₂ solubility in polymers is restricted due to thermodynamic limitations but can be altered in the presence of a co-solvent to produce better foams. PCL can be foamed using supercritical CO₂. However, CO₂ foaming of PCL–gelatin blend becomes challenging to simultaneous swelling of PCL and compression of gelatin providing blend structural stability. This study has demonstrated ability of supercritical CO₂ to foam PCL–gelatin blends in presence of water to create porous structure. These foams were subjected post-fabrication crosslinking and supercritical CO₂ without losing porosity of foams. Thus, creating a strategy to use environmentally benign processes to fabricate, crosslink and impregnate porous scaffolds for biomedical applications.     

Photo‐crosslinkable hydrogel‐based 3D microfluidic culture device

We developed the photo‐crosslinkable hydrogel‐based 3D microfluidic device to culture neural stem cells (NSCs) and tumors. The photo‐crosslinkable gelatin methacrylate (GelMA) polymer was used as a physical barrier in the microfluidic device and collagen type I gel was employed to culture NSCs in a 3D manner. We demonstrated that the pore size was inversely proportional to concentrations of GelMA hydrogels, showing the pore sizes of 5 and 25 w/v% GelMA hydrogels were 34 and 4 μm, respectively. It also revealed that the morphology of pores in 5 w/v% GelMA hydrogels was elliptical shape, whereas we observed circular‐shaped pores in 25 w/v% GelMA hydrogels. To culture NSCs and tumors in the 3D microfluidic device, we investigated the molecular diffusion properties across GelMA hydrogels, indicating that 25 w/v% GelMA hydrogels inhibited the molecular diffusion for 6 days in the 3D microfluidic device. In contrast, the chemicals were diffused in 5 w/v% GelMA hydrogels. Finally, we cultured NSCs and tumors in the hydrogel‐based 3D microfluidic device, showing that 53–75% NSCs differentiated into neurons, while tumors were cultured in the collagen gels. Therefore, this photo‐crosslinkable hydrogel‐based 3D microfluidic culture device could be a potentially powerful tool for regenerative tissue engineering applications.     

Phototoxicity of Indocyanine Green on Human Retinal Pigment Epithelium in Vitro and its Reduction by Lutein¶

Previous work has shown that indocyanine green (ICG)‐assisted peeling of the internal limiting membrane during vitreoretinal surgery may damage the retinal pigment epithelium (RPE). The present study tested the direct toxic effects and phototoxic effects of ICG on cultured human RPE. RPE cells were exposed to ICG (0.5%, 5 min) with or without lutein (20 μM), followed by light irradiation at different doses of light energy (1.0,3.0 and 10.0 J/cm²). After 48 h, cells were collected and stained with trypan blue to obtain the number of viable and nonviable cells in different groups. Cultures exposed to ICG without light irradiation showed a significant decrease of viable cells (‐13.3%) and an increase of nonviable cells (x2.5‐fold) compared with cultures not exposed to either ICG or light, indicating the presence of direct toxic effects of ICG. In cultures exposed to ICG plus light irradiation (10.0 J/cm²), viable cells decreased significantly (‐45.0%) and nonviable cells increased significantly (x4.4‐fold) compared with cultures exposed to ICG alone. The damage to the RPE cells depended on the dose of light (1.0–10.0 J/cm²), indicating that ICG has a phototoxic effect as well as a toxic one. Lutein, an endogenous ocular antioxidant, had a protective effect on cultures exposed to ICG and light, cells treated with leutin showed an increase of viable cells (+74.6%) and decrease of nonviable cells (‐74.4%) compared with cultures without leutin but not on cultures exposed to ICG alone. Thus, it seems that photoactivated ICG kills cells through a photoxidative mechanism. Our study suggests that preoperative oral administration of lutein may protect against the phototoxic‐induced damage of ICG on the RPE cells.