A Mass‐Spectrometry‐Based Approach to Distinguish Annular and Specific Lipid Binding to Membrane Proteins

Membrane proteins engage in a variety of contacts with their surrounding lipids, but distinguishing between specifically bound lipids, and non‐specific, annular interactions is a challenging problem. Applying native mass spectrometry to three membrane protein complexes with different lipid‐binding properties, we explore the ability of detergents to compete with lipids bound in different environments. We show that lipids in annular positions on the presenilin homologue protease are subject to constant exchange with detergent. By contrast, detergent‐resistant lipids bound at the dimer interface in the leucine transporter show decreased k_off rates in molecular dynamics simulations. Turning to the lipid flippase MurJ, we find that addition of the natural substrate lipid‐II results in the formation of a 1:1 protein–lipid complex, where the lipid cannot be displaced by detergent from the highly protected active site. In summary, we distinguish annular from non‐annular lipids based on their exchange rates in solution.     

Mussel-Inspired Adhesive,Antibacterial, and Stretchable Composite Hydrogel for Wound Dressing

Hydrogels have attracted extensive attention in the field of biomedicine because of their similar structure to extracellular matrix (ECM) and good biocompatibility. However, the adhesiveness, mechanical properties, and antibacterial properties of conventional hydrogels are not satisfactory. In this study, multifunctional chitosan/polydopamine/polyacrylamide (CS/PDA/PAM) hydrogels are prepared through a nature-inspired strategy. The catechol group of polydopamine (PDA) component endows CS/PDA/PAM hydrogels with tissue adhesion and self-healing properties. The introduction of chitosan (CS) not only greatly improves antibacterial ability, but also enhances the mechanical properties of CS/PDA/PAM hydrogels. Skin wound healing experiments show that CS/PDA/PAM hydrogels could accelerate skin tissue regeneration and promote wound healing. Therefore, CS/PDA/PAM hydrogels have great potential in the application of new wound dressings.     

纳米储能纤维复合过滤膜的制备及性能

以静电纺丝技术制备的同轴聚甲基丙烯酸十八烷基酯(PSMA)/聚对苯二甲酸乙二酯(PET)纳米储能纤维为支撑层,经聚偏氟乙烯(PVDF)涂覆成膜和溶剂化处理,制备了一种低压高水通量的纳米储能纤维复合过滤膜(NFCM),其中以水或乙醇为凝固溶液的复合过滤膜分别记为NFCM@H2O或NFCM@EtOH.分析并讨论了不同溶剂处理方式对NFCM力学性能和表面形貌的影响,表征了膜的纯水通量和抗污性能,用扫描电子显微镜(SEM)观察了膜的横断面形貌.结果表明,PSMA/PET纳米储能纤维具有明显的吸放热行为,熔融温度和热焓值分别为36.5℃和10.7J/g,NFCM的熔融温度和热焓值分别为36℃和2.7J/g.NFCM的形貌结构、纯水通量和截留率与溶剂处理方式相关,NFCM@EtOH膜的水通量介于100~1400L/(m2·h)之间,而NFCM@H2O膜的水通量仅在40~220L/(m2·h)之间.NFCM的拉伸强度由初始0.925MPa(PVDF)提高到4.28MPa以上.NFCM中的相变材料对膜过滤性能有重要影响,并在过滤温度低于50℃时具有减缓作用.     

NZFO-PZT磁电复合纳米纤维的制备及其吸波性能

采用静电纺丝法制备(1-x)Ni_0.5Zn_0.5Fe₂O₄-(x)Pb(Zr_0.52Ti_0.48)O₃(简称为(1-x)NZFO-(x)PZT, x=0.1、0.2、0.3、0.4、0.5)磁电复合纳米纤维, 研究了PZT含量对复合纳米纤维结构、电磁特性及微波吸收性能的影响。所有样品均由尖晶石结构NZFO和钙钛矿结构PZT两相所组成。由于NZFO磁损耗与PZT介电损耗的协同效应及界面效应的加强, 适量PZT相的引入可改善复合纳米纤维吸波涂层的电磁阻抗匹配和衰减特性, 提高微波吸收性能。x=0.3和0.4的复合纳米纤维分别在低频和高频范围表现出最强的微波吸收能力。当涂层厚度为2.5~5.0 mm时, x=0.3样品的最小反射损耗在6.1 GHz处达-77.2 dB, 反射损耗小于-10 dB的有效吸收带宽为11.2 GHz(2.8~12.9和16.9~18 GHz);x=0.4样品的最小反射损耗位于18 GHz处为-37.6 dB, 有效吸收带宽达到12.5 GHz(3.3~12.5和14.7~18 GHz)。     

Moco Carrier and Binding Proteins

The molybdenum cofactor (Moco) is the active site prosthetic group found in numerous vitally important enzymes (Mo-enzymes), which predominantly catalyze 2 electron transfer reactions. Moco is synthesized by an evolutionary old and highly conserved multi-step pathway, whereby the metal insertion reaction is the ultimate reaction step here. Moco and its intermediates are highly sensitive towards oxidative damage and considering this, they are believed to be permanently protein bound during synthesis and also after Moco maturation. In plants, a cellular Moco transfer and storage system was identified, which comprises proteins that are capable of Moco binding and release but do not possess a Moco-dependent enzymatic activity. The first protein described that exhibited these properties was the Moco carrier protein (MCP) from the green alga Chlamydomonas reinhardtii. However, MCPs and similar proteins have meanwhile been described in various plant species. This review will summarize the current knowledge of the cellular Moco distribution system.     

NZFO-PZT磁电复合纳米纤维的制备及其吸波性能

采用静电纺丝法制备(1-x)Ni_0.5Zn_0.5Fe₂O₄-(x)Pb(Zr_0.52Ti_0.48)O₃(简称为(1-x)NZFO-(x)PZT, x=0.1、0.2、0.3、0.4、0.5)磁电复合纳米纤维, 研究了PZT含量对复合纳米纤维结构、电磁特性及微波吸收性能的影响。所有样品均由尖晶石结构NZFO和钙钛矿结构PZT两相所组成。由于NZFO磁损耗与PZT介电损耗的协同效应及界面效应的加强, 适量PZT相的引入可改善复合纳米纤维吸波涂层的电磁阻抗匹配和衰减特性, 提高微波吸收性能。x=0.3和0.4的复合纳米纤维分别在低频和高频范围表现出最强的微波吸收能力。当涂层厚度为2.5~5.0 mm时, x=0.3样品的最小反射损耗在6.1 GHz处达-77.2 dB, 反射损耗小于-10 dB的有效吸收带宽为11.2 GHz(2.8~12.9和16.9~18 GHz);x=0.4样品的最小反射损耗位于18 GHz处为-37.6 dB, 有效吸收带宽达到12.5 GHz(3.3~12.5和14.7~18 GHz)。     

Electrospun Aspirin/Eudragit/Lipid Hybrid Nanofibers for Colon-targeted Delivery Using an Energy-saving Process

Both electrospinning apparatus and their commercial pro-ducts are extending their applications in a wide variety of fields. However, very limited reports can be found about how to implement an energy-saving process and in turn to reduce the production cost. In this paper, a brand-new type of coaxial spinneret with a solid core and its electrospinning methods are developed. A novel sort of medicated Eudragit/lipid hybrid nanofibers are gene-rated for providing a colon-targeted sustained release of aspirin. A series of characterizations demonstrates that the as-prepared hybrid nanofibers have a fine linear morphology with the aspirin/lipid separated from the matrix Eudragit to form many tiny islands. In vitro dissolution tests exhibit that the hybrid nanofibers are able to effectively prevent the release of aspirin under an acid condition (8.7%±3.4% for the first two hours), whereas prolong the drug release time period under a neutral condition(99.7±4.2% at the se-venth hour). The energy-saving mechanism is discussed in detail. The prepared aspirin-loaded hybrid nanofibers can be further transferred into an oral dosage form for potential application in counte-ring COVID-19 in the future.     

One Step Fabrication and Application of Antibacterial Electrospun Zein/Cinnamon Oil Membrane Wound Dressing via In situ Electrospinning Process

Antibacterial wound dressing can benefit the wound healing by preventing bacterial infection, especially for the electrospun ones due to their porous structures and easily loading antibacterial drugs. However, it is challenging to apply the antibacterial electrospun wound dressing to covering the wound conveniently and safely. Here, we presented one step fabrication and application of antibacterial electrospun zein/cinnamon oil wound dressing via a handheld electrospinning setup. The prepared zein/cinnamon oil wound dressing showed gas permeability of (76.1±5.45) mm/s, hydrophilicity with zero body fluid contact angle, swelling stability after 24 h as well as antibacterial zones over 5 cm against both E. coli and S. aureus bacteria. Moreover, in situ electrospinning process can deposit the electrospun zein/cinnamon oil fibers directly onto the wound, meantime forming a wound dressing. The mice cut-wound model experiment demonstrated that the one step in situ fabrication and application of zein/cinnamon oil wound dressing could nearly heal the wound within 11 d.     

CeO2/TiO2复合纳米纤维的制备及光催化性能研究

采用静电纺丝技术和水热合成法制备了CeO₂/TiO₂复合纳米纤维. 利用X射线衍射(XRD)、拉曼光谱(Raman)、扫描电镜(SEM)、透射电镜(TEM)和比表面积测定(BET)等分析测试手段对样品的形貌及结构进行了表征, 并以罗丹明B的脱色降解为模式反应, 考察了样品的光催化性能. 结果表明: CeO₂纳米粒子均匀地生长在TiO₂纳米纤维表面, 形成了异质结构的CeO₂/TiO₂复合纳米纤维光催化材料. 通过改变碱源, 可以得到不同形貌的CeO₂. CeO₂的存在增加了TiO₂纳米纤维的比表面积, 有效地实现TiO₂光生电子和空穴的分离, 增强了体系的量子效率, 与纯TiO₂纳米纤维相比光催化活性明显提高. 初步探讨了异质结的形成机理.     

High Strength Electrospun Single Copolyacrylonitrile (coPAN) Nanofibers with Improved Molecular Orientation by Drawing

High-performance carbon nanofibers are highly dependent on the performance of their precursors, especially polyacrylonitrile (PAN).In this work, the copolymer of PAN (coPAN) was synthesized for electrospinning. A self-assembling set-up was used for the stretching of single coPAN nanofibers. FTIR and Raman spectroscopies were used to characterize the chemical structure of coPAN nanofibers. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to monitor the morphology of single coPAN nanofibers under different drawing times. Micro-tensile test was used to determine the mechanical properties of single coPAN nanofibers. The results indicated that the drawing led to an increase in degree of molecular orientation along the fiber axis from 0.656 to 0.808, tensile strength from 304 MPa to 595 MPa, and modulus from 3.1 GPa to 12.4 GPa. This research would provide fundamental information of high-performance electrospun coPAN nanofibers and offer opportunities for the preparation of high-performance carbon nanofibers.     

SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

同轴静电纺丝法制备具有核-壳纤维结构的多功能敷料

利用同轴静电纺丝制备了具有核壳结构纳米纤维的未交联敷料,其中纤维内核为载有抗菌药物莫匹罗星的聚己内酯(PCL),外壳则由载有麻醉剂利多卡因的胶原构成;通过京尼平将胶原外壳交联后得到交联敷料.用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察了未交联敷料的表面形貌和纤维的核壳结构.体外药物释放实验结果表明,在2种敷料中,2种药物在1 h内均出现了突释现象,而在随后的60 h中,2种药物均能从敷料中缓慢释放出来,说明2种敷料均具有较好的持续止痛与抗菌性能.二辛可宁酸(Bicinchonininc acid,BCA)蛋白测试结果表明,未交联敷料外壳上的胶原蛋白能够持续地释放出来.体外细胞培养结果表明,与交联敷料相比,未交联敷料能够更好地促进成纤维细胞L929的黏附和生长,具有更好的促进伤口愈合作用.体外抗菌实验结果显示,负载了莫匹罗星的2种敷料的抗菌性能均明显高于对照组,具有良好的抗菌性能.     

Electrospun Hierarchical CaCo2O4 Nanofibers with Excellent Lithium Storage Properties

Hierarchical CaCo₂O₄ nanofibers (denoted as CCO‐NFs) with a unique hierarchical structure have been prepared by a facile electrospinning method and subsequent calcination in air. The as‐prepared CCO‐NFs are composed of well‐defined ultrathin nanoplates that arrange themselves in an oriented manner to form one‐dimensional (1D) hierarchical structures. The controllable formation process and possible formation mechanism are also discussed. Moreover, as a demonstration of the functional properties of such hierarchical architecture, the 1D hierarchical CCO‐NFs were investigated as materials for lithium‐ion batteries (LIBs) anode; they not only delivers a high reversible capacity of 650 mAh g^?1 at a current of 100 mA g^?1 and with 99.6 % capacity retention over 60 cycles, but they also show excellent rate capability with respect to counterpart nanoplates‐in‐nanofibers and nanoplates. The high specific surface areas as well as the unique feature of hierarchical structures are probably responsible for the enhanced electrochemical performance. Considering their facile preparation and good lithium storage properties, 1D hierarchical CCO‐NFs will hold promise in practical LIBs.     

Preparation and Properties of Electrospun Sheath-core Modified-PMMA Nanofibers with Photoluminescence and Photochromic Functions

Multi-functional nanofibers are playing an important role in the optical field, and are widely used in fluorescence indication, product anti-counterfeit identification and smart clothing. Nanofibers with photoluminescence and photochromic functions are already attracting more interest from researchers. In this work, based on electrospun technology, the modified-PMMA nanofibers[PMMA=poly(methyl methacrylate)] with photoluminescence and photochromic functions were prepared through the design of the sheath-core structure(SCNFs 1-4). Compared with other samples, SCNF-4 shows outstanding photoluminescence and photochromic functions. SCNF-4 can produce green light and its fluorescence intensity and fluorescence lifetime can reach 7144 a.u. and 1031.32 μs, respectively. In photochromic functions, SCNF-4 can show purple in 1 min under the 365 nm ultraviolet light, and the color can be preserved for more than 4 h under the sunlight. When SCNF-4 is irradiated by far infrared light, the color of the samples can fade quickly in 40 s. Under the irradiation of ultraviolet light of different wavelengths, SCNF-4 can display multi-color fluorescence and achieve a reversible transition between white and purple. The design of the sheath-core structure realizes the complementarity of photoluminescence and photochromic functions of the electrospun modified-PMMA nanofibers, which is important to promote the wide application of multi-functional nanofibers in the optical field.     

含铋配合物与奈瑟氏菌铁结合蛋白的反应性质研究

铁结合蛋白(Fbp)是致病菌获取Fe3+的关键蛋白。本文采用氨三乙酸(H3NTA)和硝酸铋反应制备BiNTA.2H2O,并运用元素分析、NMR等手段进行表征。通过在大肠杆菌中克隆表达和分离纯化出奈瑟氏淋病双球菌的Fbp,测定不同计量比nBiNTA/napo-Fbp下反应的紫外可见光谱,确定BiNTA与apo-Fbp的反应为一级反应,反应速率常数约为(0.175±0.064)min-1(10 mmol.L-1 Hepes/HPO42-pH 7.4缓冲溶液,310 K)。NH4BiCit与apo-Fbp的反应也为一级反应,反应速率与BiNTA相近。Bi3+与apo-Fbp的饱和结合计量比为1∶1,形成三元配合物Fbp-Bi-NTA的结合常数(lgK)为(21.43±0.20),形成Fbp-Bi-Cit的结合常数(lgK)为(16.03±0.03)。实验结果表明,致病菌中运输Fe3+的蛋白铁结合蛋白可作为含铋抗菌药物的潜在靶分子。     

PLLA/POSS Nanofibers Loaded with Multitargeted pANG Composite Nanoparticles for Promotion of Vascularization in Shear Flow

In vitro prevascularization is particularly important for the clinical application of tissue engineering scaffolds that require vascularization. The principal challenge is simulating the dynamic in vivo environment to promote the continuous growth of blood vessels. In this study, two targeting polypeptides are linked to the two ends of an amphiphilic block copolymer, polyethyleneimine‐b‐poly(lactide‐co‐3(S)‐methyl‐morpholine‐2,5‐dione)‐b‐polyethyleneimine (PEI‐PLMD‐PEI), and self‐assembled to form positively charged nanoparticles (NPs), which can bind to negatively charged pANG through electrostatic interactions; the polypeptides are finally loaded into PLLA/polyhedral oligomeric silsesquioxane (POSS) porous fibers to prepare untargeted nanofibers (unTFs), targeted porous nanofibers (TFBs), and targeted nanofiber bundles. The effects of the porous nanofibers on human umbilical vein endothelial cell (HUVEC) transfection, spreading, proliferation, morphology, and expression of related factors are investigated under the action of shear flow force. The results show that the PLLA/POSS nanofibers can maintain stable release of multitargeted NPs for nearly 45 days. Both the dual‐targeted porous NPs and shear flow improve the pANG transfection efficiency and promote cell proliferation, and they have a good synergistic effect. These results provide a potential strategy for designing HUVEC‐specific gene carriers and using shear flow to enhance endothelialization.     

La3+诱导钙调蛋白与鼠脑组织钙调蛋白亲合蛋白的结合

应用固定化钙调蛋白(CaM)亲合色谱法、变性丙烯酰胺电泳(SDS-PAGE)和基质辅助激光解析电离飞行时间质谱(MALDI-TOF-MS)等方法研究了La3+诱导CaM在大鼠脑匀浆液中的钙调蛋白亲合蛋白(CaMBP)谱以及CaM-CaMBP在模拟细胞环境下结合作用的La3+浓度依赖关系, 并与Ca2+的作用进行了比较. 实验结果表明, (1) La3+参与的CaMBP物种与Ca2+的基本相同. 鉴定了其中含量高且稳定出现的5种CaMBP分别是参与糖酵解反应的6-磷酸果糖激酶和3-磷酸甘油醛脱氢酶、细胞骨架类的微管蛋白和肌动蛋白以及应激反应相关的71000热休克同源蛋白, 表明稀土离子可能参与多种细胞过程; (2) La3+诱导CaM与5种CaMBP结合的浓度依赖曲线因CaMBP物种的不同而存在差别. 热休克同源蛋白、肌动蛋白或微管蛋白对La3+相对敏感, La3+在金属-CaM-CaMBP三元体系中与CaM的结合常数K与Ca2+的相近或稍高; 而6-磷酸果糖激酶和3-磷酸甘油醛脱氢酶体系对La3+的敏感性明显低于Ca2+. 其原因可能在于模拟细胞环境的复杂性以及CaM-CaMBP蛋白质相互作用对金属离子与CaM配位结合的调节.     

Probing Membrane Protein Insertion into Lipid Bilayers by Solid-State NMR

Determination of the environment surrounding a protein is often key to understanding its function and can also be used to infer the structural properties of the protein. By using proton-detected solid-state NMR, we show that reduced spin diffusion within the protein under conditions of fast magic-angle spinning, high magnetic field, and sample deuteration allows the efficient measurement of site-specific exposure to mobile water and lipids. We demonstrate this site specificity on two membrane proteins, the human voltage dependent anion channel, and the alkane transporter AlkL from Pseudomonas putida. Transfer from lipids is observed selectively in the membrane spanning region, and an average lipid-protein transfer rate of 6 s⁻¹ was determined for residues protected from exchange. Transfer within the protein, as tracked in the ¹⁵N-¹H 2D plane, was estimated from initial rates and found to be in a similar range of about 8 to 15 s⁻¹ for several resolved residues, explaining the site specificity.     

An NMR Method To Pinpoint Supramolecular Ligand Binding to Basic Residues on Proteins

Targeting protein surfaces involved in protein–protein interactions by using supramolecular chemistry is a rapidly growing field. NMR spectroscopy is the method of choice to map ligand‐binding sites with single‐residue resolution by amide chemical shift perturbation and line broadening. However, large aromatic ligands affect NMR signals over a greater distance, and the binding site cannot be determined unambiguously by relying on backbone signals only. We herein employed Lys‐ and Arg‐specific H2(C)N NMR experiments to directly observe the side‐chain atoms in close contact with the ligand, for which the largest changes in the NMR signals are expected. The binding of Lys‐ and Arg‐specific supramolecular tweezers and a calixarene to two model proteins was studied. The H2(C)N spectra track the terminal CH₂ groups of all Lys and Arg residues, revealing significant differences in their binding kinetics and chemical shift perturbation, and can be used to clearly pinpoint the order of ligand binding.