首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
A Pd‐isatin Schiff base complex immobilized onγ‐Fe2O3 (Pd‐isatin Schiff base‐γ‐Fe2O3) was synthe‐sized and characterized by Fourier transform infrared, scanning electron microscopy, high resolu‐tion transmission electron microscopy, X‐ray diffraction, thermogravimetric gravimetric analysis, inductively‐coupled plasma, X‐ray photoelectron spectroscopy, and elemental analysis. It was used as a magnetically reusable Pd catalyst for the Heck and Suzuki cross‐coupling reactions.  相似文献   

2.
TiO2担载镍催化剂上硝基苯液相加氢(英文)   总被引:1,自引:0,他引:1  
The catalytic hydrogenation of nitrobenzene to aniline employing nickel impregnated on rutile,anatase,and high surface area titania supports has been investigated.The nickel is present in elemental state as fcc phase on the catalyst as evidenced by X-ray diffraction results.The Ni crystallite size was found to be greater for Ni/anatase.The temperature-programmed reduction results suggest a greater metal-support interaction for Ni/rutile.The observed order of catalytic activity for the hydrogenation of nitrobenzene is Ni/rutile > Ni/anatase > Ni/TiO2.A conversion of 99% was observed for Ni/rutile at 140 oC and hydrogen pressure of 1.96 MPa.Interestingly,aniline is the only product formed which demonstrates the catalytic hydrogenation of nitrobenzene proceeds with atom economy.Both Ni/rutile and Ni/anatase exhibited a better stability than Ni/TiO2.The hydrogenation proceeds with the preferential adsorption of hydrogen on nickel present in the catalyst surface,possibly assisted by TiOx species.  相似文献   

3.
E.S.BAEISSA  R.M.MOHAMED 《催化学报》2013,34(6):1167-1172
Ga2O3‐SiO2 nanoparticles were prepared by a sol‐gel method and Pt was then immobilized on their surface via photo‐assisted deposition (PAD). The produced samples were characterized using X‐ray diffraction (XRD), ultraviolet and visible spectroscopy, photoluminescence emission spectroscopy, and surface area measurements. The catalytic performances of the Ga2O3‐SiO2 and Pt/ Ga2O3‐SiO2 samples were evaluated for the degradation of cyanide using visible light. XRD and EDX results showed that the Pt was well dispersed within the Ga2O3‐SiO2 phase and was detected on the surface of the catalyst, which confirmed the successful loading of Pt ions by the PAD method. BET results revealed that the surface area of Ga2O3‐SiO2 was higher than that of Pt/Ga2O3‐SiO2 . 0.3 wt% Pt/Ga2O3‐SiO2 exhibited the highest photocatalytic activity for degradation of cyanide under visible light. The catalyst could be reused with no loss in activity for the first 10 cycles.  相似文献   

4.
A MoO3-TiO2 nanocrystalline composite material was prepared by a simple solgel method.The synthesized material was charac-terized by X-ray diffraction,scanning electron microscopy with an electron dispersion spectroscopy,transmission electron microscopy,and Fourier transform infrared spectroscopy.Melanoidin is a dark brown pigment found in wastewater from the sugar industry and it pollutes water.This polluted water is generally referred to as molasses and it undergoes fermentation and is solely responsible for water,soil,and air pollution.The synthesized catalytic material was found to be effective in degrading molasses under UV-visible radiation.Analysis of treated and untreated molasses was carried out by measuring its color,chemical oxygen demand,biological oxygen demand,pH,and total dissolved solid.Results from these analyses indicate the effective photodegradation of the molasses.This methodology has several advantages such as high photocatalytic activity,non-toxicity,cleanliness,and reusability of the catalytic material.  相似文献   

5.
在Ir/TiH2催化剂上进行了巴豆醛液相选择性加氢反应,并研究催化剂还原温度对其反应行为的影响.相比于Ir/TiO2催化剂,相同反应条件下Ir/TiH2催化剂的活性提高了 2倍(80℃时巴豆醛转化率为52%),且巴豆醇选择性大幅度提高(78%).表征结果表明,Ir/TiH2催化剂表面富含的氧缺位和强的H活化能力是催化剂...  相似文献   

6.
Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.  相似文献   

7.
刘蓉  王铁峰  刘畅  金涌 《催化学报》2013,34(12):2174-2182
以磷钨酸铯盐Cs2.5H0.5PW12O40(CsPW)为活性组分,负载到Nb2O5载体上,并用于甘油脱水制备丙烯醛的反应中.通过调节焙烧温度(400–700°C)以及活性组分负载量(5儃60 wt%),对催化剂酸性进行调节.CsPW负载量为20 wt%,500°C焙烧的CsPW/Nb2O5催化剂性能最佳,甘油转化率为96%,丙烯醛选择性为80%,反应10 h内没有失活现象,并且该催化剂具有良好的热稳定性,可通过烧炭进行再生.  相似文献   

8.
We report the fabrication and characterization of a magnetically recyclable Fe3O4@Nico@Ag catalyst for reduction reactions in the liquid phase. Fe3O4 is a magnetic core and nicotinic acid was used as the linker for Ag. The characterization was done with X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, vibrating sample magnetometry (VSM), and ultraviolet-visible spectroscopy. VSM measurements proved the super-paramagnetic property of the catalyst.  相似文献   

9.
采用等体积浸渍法制备了不同负载量的La2O3/γ-Al2O3催化剂,并考察了负载量和反应温度对催化剂用于二甲醚二氧化碳重整制氢反应的性能影响。结果表明,反应温度为550℃、La2O3负载量为15%时,催化剂表现出最好的性能:二甲醚的转化率为100%,二氧化碳的转化率达到85.4%,产物氢气的选择性高达93.3%,一氧化碳的选择性为76.04%,副产物甲烷的选择性仅为6.3%。550 ℃时其平均积炭速率为1.387 5 mg/(g·h)。研究还利用XRD、BET、TEM、TG等方法对催化剂进行了表征。  相似文献   

10.
A series of hybrid catalysts were made by physically mixing Cu-ZrO 2 and γ-Al 2 O 3,for former it was modified with different loadings of La 2 O 3 prepared by co-precipitation method.The catalysts were characterized by BET,XRD,N 2 O-adsorption,EXAFS,H 2-TPR,NH 3-TPD techniques and evaluated in the synthesis of dimethyl ether from syngas.The results show that La 2 O 3 promoted catalysts displayed a significantly better catalytic performance compared with Cu-ZrO 2 /γ-Al 2 O 3 catalyst in CO conversion and DME selectivity,and the optimum catalytic activity was obtained when the content of La 2 O 3 was 12 wt%.The characterizations reveal that high copper dispersion,facile reducibility of copper particles and appropriate amount of acidic sites are responsible for the superior catalytic performance.  相似文献   

11.
巴豆醛是α, β-不饱和醛中最具代表性的一类有机化合物,采用气相催化巴豆醛选择加氢制备巴豆醇符合原子经济和绿色化学要求,具有重要的工业应用和学术价值。本文综述了近十年国内外巴豆醛气相选择性加氢合成巴豆醇的负载型催化剂的研究成果,评述了贵金属催化剂(铂、金、铱、银、钯)和非贵金属催化剂(钴、铜)上巴豆醛选择性加氢性能,分析了活性组分、载体、助剂以及活性组分粒径对催化剂性能的影响,探讨了巴豆醛选择性加氢的反应机理和失活机理。最后,对气相巴豆醛选择性加氢催化剂所存在的问题进行总结,并对催化剂的发展趋势作出了展望。指出了非贵金属催化剂的巴豆醛选择性加氢性能因具有价廉易得等优势,将是该领域的研究方向之一。催化剂失活是巴豆醛气相选择性加氢工业化的最大障碍,因此研究和认识反应机理,解决催化剂失活问题是重点研究方向。  相似文献   

12.
采用沉积一沉淀法制备了Pt/Pr_6O_(11)催化剂,应用于巴豆醛气相选择性加氢生成巴豆醇的反应.Pt/Pr_6O_(11)催化剂经700℃还原后,巴豆醇初始选择性可以达到75%以上.H_2-TPR和In situ FTIR结果表明,还原后的Pt/Pr_6O_(11)催化剂中存在低价态的Pr~(3+),在巴豆醛加氢过程中能够给Pt提供电子,增加活化C=0键的能力,从而提高生成巴豆醇的选择性.Raman光谱实验结果表明,反应过程中Pt/Pr_6O_(11)催化剂表面有积炭产生,而积炭是造成催化剂活性和选择性下降的主要原因.  相似文献   

13.
采用浸渍法制备了Ce0.8La0.2O1.9同溶体负载Pt催化剂,用于气相巴豆醛选择加氧反应中.采用X射线粉末衍射、程序升温还原、NH3程序升温脱附和拉曼光谱等技术对催化剂进行了表征.结果表明,随着Pt负载量增加,Pt/Ce0.8La0.2O1.9催化剂活性(TOF)和巴豆醇选择性均先增加后降低.当Pt负载量为3%时,...  相似文献   

14.
巴豆醛是一种重要的α,β-不饱和醛,其选择性加氢常被用作模型反应用以研究催化剂构效关系.近年来,文献报道了众多贵金属基催化剂上巴豆醛选择性加氢的结果.我们主要从贵金属催化剂角度系统地讨论和总结该反应的最新进展.通过比较催化剂的不同反应行为,进一步明确催化剂性质(如催化剂结构、晶面/界面效应、电子效应和几何效应等)与反应性能之间的关系.并尝试总结和讨论当前研究中所存在的不足与前景,为进一步提高目标产物的收率提供思路.  相似文献   

15.
Zn对非晶态Co-B催化剂巴豆醛选择加氢性能的影响   总被引:3,自引:0,他引:3  
考察了Zn的两种不同修饰方式对非晶态Co-B催化剂上巴豆醛液相加氢性能的影响, 并采用ICP, XRD, DSC, XPS等手段对催化剂进行了系统的表征. 实验表明, 当反应液中加入适量的ZnCl2时, Zn2+离子一方面通过在活性位上的选择性吸附抑制C=C键的加氢; 另一方面, Zn2+离子可通过极化作用使羰基活化, 令解离吸附氢对羰基的亲电进攻更容易, 从而提高羰基的加氢活性. 当ZnCl2/Co摩尔比为5%时, 羰基加氢产物巴豆醇的最高得率为36 mol%, 达到文献较高水平. 催化剂制备时加入的ZnCl2在催化剂中以Zn(OH)2的形式存在, 并使催化剂中的Co, B氧化物增多. 这些氧化物无选择性地覆盖了活性位, 使羰基和C=C键的加氢速率以相似的程度下降, 这样不仅不能有效提高巴豆醇的选择性, 还使催化剂活性急剧降低.  相似文献   

16.
高分子稳定的钌纳米金属簇选择性催化氢化巴豆醛   总被引:2,自引:0,他引:2  
刘漫红  刘汉范  李斌 《合成化学》2006,14(5):442-445,449
以聚乙烯吡咯烷酮稳定的钌纳米金属簇(PVP-Ru)为催化剂,进行了巴豆醛的选择性催化氢化。结果表明,反应体系中水和氢氧化钠的引入,可提高催化活性,但降低了选择性。某些金属阳离子对PVP-Ru的修饰作用使选择性有所提高,但降低了催化活性。尤其是经Co2 修饰后,巴豆醇的最高产率为5.5%,而催化活性由150.4 mol巴豆醛/mol Ru.h降至96.7 mol巴豆醛/mol Ru.h。  相似文献   

17.
采用浸渍法制备了负载型Ir/ZrO2催化剂,详细考察了H2还原温度对Ir/ZrO2催化剂上气相巴豆醛选择性加氢反应性能的影响.结果表明,随着还原温度的升高,Ir/ZrO2催化剂上巴豆醛转化率和巴豆醇选择性均先升后降.400°C下还原时,Ir/ZrO2催化剂性能最佳,巴豆醛转化率和巴豆醇选择性分别达32.2%和74.3%.X射线光电子能谱结果表明,催化剂表面系Ir0和Ir3+共存,且随着还原温度的升高,Ir0的比例逐渐增加,至600oC时,表面Ir物种大部分以Ir0存在.NH3程序升温脱附结果表明,随着还原温度的升高,催化剂表面Lewis酸中心的数目减少,强度下降.这是由于催化剂中Cl含量下降所致.Ir0和Ir3+共存和中等强度的表面Lewis酸中心有利于提高巴豆醇选择性.  相似文献   

18.
 通过浸渍法制备了不同Cu/Zn比的γ-Al2O3和改性γ-Al2O3负载的Cu-Zn催化剂,并用XRD,XPS和SEM等手段对催化剂进行了表征.XRD表征结果表明,还原活化前催化剂中的Cu和Zn分别以CuO和ZnO的形式存在;还原活化后Cu以单质的形式存在;催化剂失活后,单质Cu又转变成CuO.XPS和SEM分析结果表明,催化剂中金属的价态及颗粒的形貌在反应前后发生了变化.所制备的催化剂在糠醛加氢制糠醇反应中表现出较高的选择性.用Co改性的γ-Al2O3负载的Cu-Zn催化剂不仅具有较高的催化活性和选择性,而且还呈现出较长的寿命.催化剂中的Cu晶相是催化活性中心;催化剂中的Cu晶相转变成CuO和烧结是催化剂失活 的主要原因.  相似文献   

19.
肖强 《分子催化》2012,26(4):308-313
3-甲基-2-丁烯醛(3-MeCal)是一种典型的α,β-不饱和醛,其C=O加氢产物3-甲基-2-丁烯醇(3-MeCol)作为重要的有机中间体,在医药、香料、农药等生产领域有着广泛的应用.我们采用沉积沉淀法制备了Co/Al2O3催化剂,将其应用于3-MeCal液相选择性加氢反应中,考察了反应温度、H2初始压力、催化剂焙烧温度和还原温度对3-MeCal选择性加氢反应的影响.发现反应温度为80℃,H2初始压力为1×106Pa下,加氢反应效果良好.通过H2-TPR与XRD表征了焙烧温度对催化剂的影响,发现适当焙烧温度能增强Co物种与载体Al2O3间作用力.焙烧温度为600℃,还原温度为550℃下制备的催化剂反应48 min后转化率为23.0%,3-MeCol选择性达到88.6%.制备的Co/Al2O3催化剂具有良好的磁性,在外磁场作用下可与液相反应体系实现高效分离,循环使用3次后,催化性能没有明显下降,表现出良好的循环使用性能.  相似文献   

20.
采用多步法依次将制备的Fe3O4纳米颗粒和Pt纳米颗粒负载到多壁碳纳米管(MCNT)上得到Pt/Fe3O4-MCNT磁性催化剂,以X射线衍射(XRD)、透射电镜(TEM)、超导量子干涉磁强计(SQUID)和热重-差热分析(TG-DTA)对Pt/Fe3O4-MCNT磁性催化剂的结构和磁性质进行了表征。研究发现预制备的Fe3O4纳米颗粒与Pt纳米颗粒均匀地分散于MCNT上,新制备以及多次使用后的Pt/Fe3O4-MCNT室温下都具有良好的超顺磁性。研究了Pt/Fe3O4-MCNT磁性催化剂上的肉桂醛选择性加氢反应,结果显示催化剂具有良好的C=O加氢活性,肉桂醛转化率在50%左右时,肉桂醇选择性可达96%以上。尺寸均一的Pt粒子均匀的分散在催化剂上可能是催化剂具有良好的C=O加氢选择性的重要原因。在外加磁场作用下催化剂可以高效地从液相反应体系中分离,经多次循环使用后仍具有良好的催化性能。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号