金属板条在圆柱形模中弯曲成形的大变形有限元分析

本文采用大变形弹塑性有限元法对金属板条在柱形模中的压弯成形过程进行了数值模拟,并与实验进行了比较。首先给出了纠正的拉格朗日有限元公式和基于弹塑性乘法分解的超弹性塑性本构关系。对接触摩擦问题的处理采用了罚函数法。通过对数值结果的分析得出了一些对弯曲工艺的设计有指导价值的结论。     

Inverse asymptotic solution method for finite deformation elasto-plasticity

I.IntroductionTheaccuracyofcomputermethodforsolvingengineeringproblemsfirstdependsonreliabilityofthetheorywhichisbeingapplied.Althoughfiniteelementmethodhasgainedgreatsuccessesinengineeringapplication.However,duetothetheoreticallimitationsofclassicalmecha…     

Differential quadrature method for bending of orthotropic plates with finite deformation and transverse shear effects

Based on the Reddy ‘s theory of plates with the effect of higher-order shear deformations, the governing equations for bending of orthotropic plates with finite deformations were established. The differential quadrature ( DQ ) method of nonlinear analysis to the problem was presented. New DQ approach, presented by Wang and Bert ( DQWB), is extended to handle the multiple boundary conditions of plates. The techniques were also further extended to simplify nonlinear computations. The numerical convergence and comparison of solutions were studied. The results show that the DQ method presented is very reliable and valid. Moreover, the influences of geometric and material parameters as well as the transverse shear deformations on nonlinear bending were investigated. Numerical results show the influence of the shear deformation on the static bending of orthotropic moderately thick plate is significant.     

The random variational principle in finite deformation of elasticity and finite element method

ＴＨＥＲＡＮＤＯＭＶＡＲＩＡＴＩＯＮＡＬＰＲＩＮＣＩＰＬＥＩＮＦＩＮＩＴＥＤＥＦＯＲＭＡＴＩＯＮＯＦＥＬＡＳＴＩＣＩＴＹＡＮＤＦＩＮＩＴＥＥＬＥＭＥＮＴＭＥＴＨＯＤＧａｏＨａｎｇ－ｓｈａｎ（高行山）（ＮｏｒｔｈｗｅｓｔｅｎＰｏｌｙｔｅｃｈｎｉｃａｌＵ...     

大变形问题分析的局部Petrov-Galerkin法

在微机电系统(MEMS)的建模和模拟研究中,大变形或大移动要充分予以考虑.用有限元法分析这类问题,由于难以避免的网格畸变,使模拟效率精度降低甚至失效,无网格方法(Meshless Method)则能在分析这类问题时显示出明显的优势,无网格局部Petrov-Galerkin(MLPG)法被誉为是一种有发展前景的真正无网格法.本文进一步发展了MLPG法,通过对任意的离散分布节点采用局部径向基函数构造插值形函数和Heaviside权函数,分析方程采用局部加权弱形式离散,建立了变量仅依赖于初始构型的完全Lagrange分析格式,最后用Newton-Raphson法迭代求解.文中分析了悬臂梁典型算例和微机电开关非线性大变形问题,通过与有限元结果的比较,表明本文提出的大变形问题无网格局部Petrov-Galerkin法具有稳定性好及收敛性快等优点.     

饱和多孔介质大变形分析的一种有限元-有限体积混合方法

建立了饱和多孔介质大变形分析的一种有限元-有限体积混合计算方法.将饱和多孔介质视为由固体骨架和孔隙水组成的两相体,其基本方程包括动力平衡方程和渗流连续方程.基于u-p假定和更新的Lagrange方法,饱和多孔介质的动力平衡方程在空间域内采用有限元方法进行离散,而渗流连续方程在空阃域内则采用有限体积法进行离散.通过两个数值算例,一维有限弹性固结和动力荷载作用下堤坝动力响应的计算,验证了该方法的有效性.     

钢-混凝土组合箱梁梁段有限元法研究

组合梁界面滑移将减小组合梁刚度,增大变形,影响构件性能;剪应力沿截面横向分布不均匀,造成其弯曲正应力的横向分布呈曲线形状,即剪力滞效应;同时组合梁往往重载,具有较小的跨高比,剪切变形不可忽略.根据虚功原理,建立了同时考虑滑移效应、剪力滞及剪切变形效应的组合梁单元刚度矩阵及等效节点力向量,并在此基础上编制了组合梁梁段有限元程序.利用本文程序对现有组合梁试件的混凝土顶板应力、钢梁底板应力、跨中挠度和梁端滑移进行了计算,并将本文计算结果与解析法计算结果及试验结果进行了比较.结果表明,本文计算结果与解析法计算结果及试验结果吻合良好;同时,本文计算结果具有较好的稳定性,验证了本文计算方法的正确性.本文所建立的梁单元刚度矩阵同时考虑了剪切变形、剪力滞及滑移效应的影响,符合工程实际,为有限梁段法分析组合箱梁提供了理论基础.     

用于柱形爆炸容器周向大变形历程测量的应变丝技术

为了测量柱形爆炸容器的动态周向大变形历程,开发了应变丝测量技术。选用性能良好的合金丝沿爆炸容器周向固定,容器膨胀变形驱动合金丝同步伸长,配合适当的电路,检测合金丝的电阻变化,从而获得容器的变形历程。在钢筒的中心进行了120 g TNT当量球形装药下的爆炸加载实验,获得了峰值超过20%的钢筒周向变形历程。测量结果与实验后钢筒变形实测结果及数值模拟结果吻合较好。

     

SOLITARY WAVES IN FINITE DEFORMATION ELASTIC CIRCULAR ROD

A new nonlinear wave equation of a finite deformation elastic circular rod simultaneously introducing transverse inertia and shearing strain was derived by means of Hamilton principle. The nonlinear equation includes two nonlinear terms caused by finite deformation and double geometric dispersion effects caused by transverse inertia and transverse shearing strain. Nonlinear wave equation and corresponding truncated nonlinear wave equation were solved by the hyperbolic secant function finite expansion method. The solitary wave solutions of these nonlinear equations were obtained. The necessary condition of these solutions existence was given also.     

APPLICATION OF VECTOR TO SMALL DEFORMATION

ＡＰＰＬＩＣＡＴＩＯＮ　ＯＦ　ＶＥＣＴＯＲ　ＴＯ　ＳＭＡＬＬ　ＤＥＦＯＲＭＡＴＩＯＮＺｈａｎｇＳｈｅｎｘｕｅ（张慎学）（ＲｅｃｅｉｖｅｄＤｅｃ．１６，１９９４，Ｍａｙ２８，１９９５，ＣｏｍｍｕｎｉｃａｔｅｄｂｙＣｈｉｅｎＷｅｉｚａｎｇ）Ａｂｓｔｒａｃ...     

无额外自由度广义有限元非线性分析

将无额外自由度的广义有限元法由线弹性分析扩展到弹塑性大变形分析.局部强化函数的构建依赖于已有节点,不引入额外自由度,避免了线性相关性问题.在更新拉格朗日框架下,通过控制方程弱形式的线性化推导得到了节点内力的率形式,并分为材料和几何两部分.考虑超弹性和亚弹-塑性两种材料模型,采用Newton-Raphson迭代求解,给出...     

无网格局部Petrov-Galerkin法求解板壳弹塑性大变形

无网格局部Petrov-Galerkin法构造的高阶光滑的形函数非常适合建立板壳结构场函数的逼近函数,是一种比较理想的研究板壳问题的方法。基于Mindlin板壳理论,采用更新拉格朗日原理和大变形条件下场量的无网格表达形式,实现了率型无网格局部Petrov-Galerkin方法对板壳弹塑性大变形的求解,算例分析表明了方法的有效性和较高的分析精度。     

Analysis of simple shear endochronic equations for finite plastic deformation

IntroductionThestress_strainbehaviorofmaterialswithfiniteplasticdeformationisaninterestingissue ,onwhichsignificantprogresshasbeenmadethroughboththephenomenologicalandphysicalapproaches.Thephenomenologicalapproachisbasedoncontinuummechanicsofplasticity .Ithasitsadvantageinsolvingcomplicatedproblemsbecauseofitssimplicity .Mostofphenomenologicaltheoriesareinvolvedintheconceptofcorotationalrates.Thematerialderivativeofstresswasnotobjectiveunderfinitedeformation .TheJaumannratewasusuallyusedbefo…     

NON-SYMMETRICAL LARGE DEFORMATION OF A SHALLOW THIN SPHERICAL SHELL

ＮＯＮ－ＳＹＭＭＥＴＲＩＣＡＬＬＡＲＧＥＤＥＦＯＲＭＡＴＩＯＮＯＦＡＳＨＡＬＬＯＷＴＨＩＮＳＰＨＥＲＩＣＡＬＳＨＥＬＬＷａｎｇＸｉｎｚｈｉ（王新志）ＲｅｎＤｏｎｇｙｕｎ（任冬云）ＷａｎｇＬｉｎｘｉａｎｇ（王林祥）ＹｅｈＫａｉｙｕａｎ（叶开沅）（Ｇａｎ...     

板壳畸变单元的无网格和有限元自动耦合方法

板壳大变形时单元的严重畸变会使计算精度降低。无网格局部Petrov-Galerkin法是一种真正的无网格方法,能够消除网格畸变,但比有限元法计算效率低。根据板壳网格畸变的局部性特点,利用过渡单元法,基于板壳网格质量,建立了板壳的网格严重畸变区域由有限元分析切换为无网格分析的自动耦合算法,实现了有限元法和无网格局部彼得罗夫．迦辽金法的耦合。应用实例表明：通过自适应耦合,既能发挥有限元法计算效率高的特点,又能发挥无网格法适合大变形分析、没有网格畸变造成计算困难的特点。     

Nonlocal continuum model for large deformation analysis of SLGSs using the kp-Ritz element-free method

A geometrically nonlinear large deformation analysis of SLGSs is presented using the element-free kp-Ritz method. Classical plate theory (CLP) is applied to describe the geometrically nonlinear behavior of SLGSs. Nonlocal elasticity theory is incorporated into CLP to take the small-scale effect into consideration. The system nonlinear equations are derived from the Ritz procedure based on the total Lagrangian formulation. The modified Newton–Raphson method and arc-length continuation are employed to solve the nonlinear equations. The efficiency of the element-free kp-Ritz method is verified through comparison with results reported in previous research. Numerical cases are studied to examine the influence of boundary conditions, aspect ratio, side length and nonlocal parameters on the nonlinear large deformation behavior of SLGSs. An interesting phenomenon is observed in that the nonlocal parameter effect is related to the mathematical expression of the transverse load.     

基于余能原理的有限变形问题有限元列式

利用基面力概念,推导了一种基于余能原理的有限变形问题显式有限元列式,可应用于结构的大位移、大转动问题。以基面力为状态变量来表达单元的余能,将有限变形情况下的单元余能分解为变形余能部分和转动余能部分,利用Lagrange乘子法推导出余能原理有限元的控制方程,编制了相应的非线性有限元程序。通过算例分析,说明该列式和程序的可靠性和精确性。     

Geometrical nonlinear waves in finite deformation elastic rods

IntroductionSomenewphenomenaofnonlinearwavesinthesolidmediumsuchasshockwave ,solitarywaveetc.arepaidmoreattentiontoincreasinglybyresearchersbecausetheytakeonalotofimportantproperties.ItistheoreticallyanalyzedinRefs.[1 -6]thattheformationmechanismsofshockwaveandsolitarywaveintheelasticthinrodsaswellastheirpropagationproperties.TheexistenceofsolitarywaveintheelasticmediumsuchasarodandaplatehasbeenverifiedinRef.[7]byexperiments.Shockwaveandsolitarywavearesteadilypropagatingtraveling_wavesgenerat…     

基于拟应变法的壳单元大变形分析及在冲击动力问题中的应用

为了简便有效地解决板壳结构的大变形问题，本文针对八节点相对自由度壳单元进行研究。该单元的位移场由壳的中面节点位移和上表面节点的相对位移组成，不带有转动变量。所有的研究都是基于完全的三维位移、应力、应变场。采用拟应变法，对应变场另行假设，能够改善该单元在大变形情况下的计算精度。通过引入Wilson非协调模式，构造了大变形情况下的拟应变场表达式，给出了该单元用于解决非线性动力分析问题的有限元求解方程。通过算例表明，本文针对相对自由度壳单元提出的方法及推导的公式，能够解决冲击动力问题中的大变形问题。