Drying dissipative structures of spindle-shaped hematite particles coated with polymer brush

Macroscopic and microscopic drying patterns were observed on a cover glass, a watch glass, and a Petri glass dish during dryness of aqueous suspensions of spindle-shaped particles of hematite coated with polymer brush (SHB). Outer and inner broad rings formed and the spoke-lines appeared especially on a watch glass at the intermediate initial concentration of SHB. Cooperative drying processes of the convection, sedimentation, and solidification were supported also for the anisotropic particles. Most of the long axes of SHB particles distributed parallel to the substrate plane. There appeared the microscopic alignment of the several ten micrometers similar-sized aggregates composed of the SHB particles. The parallel and/or flower-like (or spoke-like) arrangements of SHB particles were observed in the scanning electron microscopy. Effective shape of SHB particles including the electrical double layers during the convection flow processes are deduced to be near spherical. However, the effective shape came to be spindle-like during the sedimentary and solidification processes by the thinning of the double layers. The distorted paralleled and/or flower-like alignments of SHB particles were observed in the dried film.     

Helix formation in the polymer brush

This work considers the physics of a brush formed by polymers capable of undergoing a helix-coil transition. A self-consistent field approximation for strongly stretched polymer chains is used in combination with a lattice model of the interaction energy in helix-coil mixtures. Crowding-induced chain stretching stabilizes helix formation at moderate tethering densities while high tethering density causes sufficiently strong stretching to unravel segments of the helix, resulting in distinct layers of monomer density and helical content. Compared to a random-coil brush at low-to-moderate tethering density, a helicogenic brush is less resistant to compression in the direction perpendicular to stretching due to easy alignment of helices and fewer unfavorable interactions between helical segments. At higher tethering density, the abovementioned stretch-induced decrease in helical content resists further compression. The proposed model is useful for understanding an emerging class of biomaterials that utilize helix-forming polymer brushes to induce shape changes or to stabilize biofunctional helical peptide sequences.     

Some aspects of AFM nanomechanical probing of surface polymer films

We analyzed how the approach developed for the microindentation of non-uniform elastic solids can be adapted to analyze the atomic force microscopy (AFM) probing of ultrathin (1-100 nm thick) polymer films on a solid substrate, as well as polymer films with a multilayered structure. We suggested that recent Johnson's modification of the contact mechanics model that included a viscoelastic contribution could also be utilized to analyze rate-dependent loading data for polymer surfaces. The graded model proposed for microindentation experiments was modified allowing to account not only for variable elastic moduli within different layers but also for the gradient of properties between layers within a transition zone. Two examples of a recent application of this model for molecularly thick hyperbranched polymer monolayers (<3 nm thick) and tri-layered polymer films (20-40 nm thick) tethered to a solid substrate were presented and discussed. In both cases, complex shapes of both loading curves and elastic modulus depth profiles obtained from experimental AFM data were successfully fitted by the graded model with realistic structural parameters.     

Brownian diffusion close to a polymer brush

In an effort to control particle diffusion near surfaces, we have studied the dynamics of colloidal hard spheres and soft compliant star copolymers on surfaces coated with polymer brushes using evanescent wave dynamic light scattering. The same experiments provide information on the brush structure and confined particle motion. The penetration into dense polydisperse brushes is size- and solvent-dependent.     

Photochemical structuring and fixing of structures in binary polymer brush layers via 2pi+2pi photodimerization

Binary polymer brushes grafted to Si wafers were prepared from hydrophilic and hydrophobic polymer components, which allow switching the surface properties (as revealed by contact angles) by exposure to varying solvents. The hydrophilic component was poly-2-vinylpyridine; the hydrophobic component was a copolymer of styrene and 2-(4-vinylphenyl)indene containing the photodimerizable phenylindene chromophore. The brushes were prepared via thermal and via photochemical grafting-to methods, which led to distinct layer thicknesses. Structural patterns differing in surface properties were produced and fixed via crosslinking the hydrophobic component by 2pi+2pi photodimerization of phenylindene moieties. The patterns were visually observable.     

Switching and structuring of binary reactive polymer brush layers

Switchable binary polymer brushes grafted to Si-wafers were prepared from hydrophilic and hydrophobic polymer components. When exposed to solvents, either the hydrophobic or the hydrophilic component extends in to the liquid phase, depending on the polarity of the solvent. The hydrophilic component was poly-2-vinylpyridine; the hydrophobic component was made photocrosslinkable in that a polystyrene copolymer containing a photodimerizing chromophore was used. In this system surfaces differing in water contact angle between 60° and 100° can be produced by variation of the solvent. The chromophore was phenylindene, which forms crosslinks upon direct UV-irradiation. Therefore, the polystyrene component can be fixed in the extended or collapsed state. It will be shown that by irradiation through an appropriate mask, surfaces can be structured and the structures fixed. In both the systems structural patterns differing in surface properties were produced and fixed photochemically.     

Amphiphilic polymer brush in a mixture of incompatible liquids

An analogue of the Alexander‐DeGennes box model is used for theoretical investigation of polymer brushes in a mixture of two solvents. The basic solvent A and the admixture B are assumed to be highly incompatible (Flory‐Huggins parameter χ_AB = 3.5). Thermodynamics of a polymer in the solvents A and B are described by parameters χ_B < χ_A ≤ 1/2. The equilibrium behavior of a brush is investigated in dependence on solvent composition, grafting density, polymer‐solvents and solvent‐solvent interactions. The possibility of a phase transition related with a strong preferential solvation of a brush by a minor solvent component with higher affinity to polymer is shown and examined. Microphase segregation inside a brush is also demonstrated despite overestimating of the brush homogeneity given by the box model. A further simplification of the model permits to obtain scaling formulas and to investigate main regularities in the brush behavior. This offers a clear physical picture of the phase segregation inside a brush in correlation with the phase state of a bulk solvent.     

Swelling of a polymer brush by a poor solvent

The addition of a small amount of a poor solvent impurity (methanol) to a theta solvent (cyclohexane) is found to cause appreciable swelling (≈30% increase of the average brush height) in a model end‐grafted polystyrene (PS) brush layer. This unusual type of swelling is not observed if octadecyltrichlorosilane (OTS) is first grafted to the portion of the silicon substrate uncovered by the grafting end‐groups of the PS chains. Brush swelling in the absence of OTS surface protection is interpreted as arising from a segregation of methanol to the solid substrate and the resulting modification of the polymer–surface interaction. We also observe that the addition of a small amount of methanol to an adsorbed PS layer exposed to cyclohexane causes rapid film delamination from the silicon substrate. Together these observations imply a strong influence of surface active impurities on the structure and adhesive stability of polymer layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4126–4131, 2004     

Critical brush density for the transition between carpet-only and carpet/brush double-layered structures

The critical brush density, where transition from carpet-only structure to carpet/brush double-layered structure occurs, was estimated for a weakly ionic amphiphilic diblock copolymer, (diethylsilacyclobutane)34-b-(methacrylic acid)50, monolayer on water by an in situ X-ray reflectivity technique. The brush density in the monolayer was controlled from 0.11 to 0.60 brush chain/nm2 by changing surface pressure and mixing a poly(diethylsilacyclobutane) homopolymer separately synthesized. Only a carpet layer was formed at a low brush density condition, but a carpet and brush double layer was found for a higher brush density of more than 0.48/nm2. This brush density, which is fairly high, would be valuable for discussing the polyelectrolyte brush nanostructure.     

A facile and environment-friendly method for fabrication of polymer brush

A novel environment-friendly system is proposed tofabricate polymer brush, which has the advantages including non-toxic and inexpensive initiator(eosin Y), visible-light exposure(λ= 515 nm), water medium and ambient environment. The experimental results from UV-Vis spectroscopy, AFM-based single molecule force spectroscopy(SMFS) and other measurements indicate thata polymer brush with a living nature is fabricated via free radical polymerization. This polymer brush may find applications incoatings, bio-interfaces and so forth.     

Photoinitiated synthesis of polymer brush from dendritic photoinitiator electrostatic self-assembly

We report on a simple and effective method to prepare polymer brush by electrostatic self-assembly of dendritic macrophotoinitiator and photoinitiated polymerization.     

Comprehensive theory for star-like polymer micelles; combining classical nucleation and polymer brush theory

A comprehensive theory is proposed that combines classical nucleation and polymer brush theory to describe star-like polymer micelles. With a minimum of adjustable parameters, the model predicts properties such as critical micelle concentrations and micellar size distributions. The validity of the present theory is evidenced in direct comparison to experiments; this revealed that the proportionality constant in the Daoud-Cotton model is of the order of unity and that the star-limit is valid down to relatively short corona chains. Furthermore, we show that the predicted saddle points in the free energy correspond to those solutions that are accessible with self-consistent field methods for self-assembly.     

Single-crystal structures of polymer electrolytes

The mechanisms by which ions are transported through polymer electrolytes are poorly understood. Structural information should greatly aid in the determination of such mechanisms and the optimization of the electrolyte properties. Ionic conductivity, however, predominates in amorphous polymer-salt phases, and characterization of amorphous solvate structures is difficult. The task is simplified by comparisons with crystalline poly(ethylene oxide) (PEO)-salt phases, but the structural determination of such phases is also difficult because single crystals have not been available. Here, it is demonstrated that single crystals of PEO-lithium salt phases may be prepared and characterized using low molecular weight PEO.     

Complex polymer brush gradients based on nanolithography and surface-initiated polymerization

Confined surface gradients consisting of polymer brushes have great potential in various applications such as microfluidic devices, sensors, and biophysical research. Among the available fabrication approaches, nanolithographies combined with self-assembled monolayers and surface-initiated polymerization have became powerful tools to engineer confined gradients or predefined complex gradients on the nanometre size. In this tutorial review, we mainly highlight the research progress of the fabrication of confined polymer brush gradients by using electron beam, laser, and probe-based nanolithographies and the physical base for these approaches. The application of these polymer brush gradients in biomedical research is also addressed.     

Brownian dynamics of a compressed polymer brush model. Off-equilibrium response as a function of surface coverage and compression rate

We study the compressive behaviour of a polymer-covered surface (i.e., a "polymer brush") using Brownian dynamics simulations. The model consists of grafted chains with variable flexibility, variable intra- and inter-chain interactions, as well as different surface coverage. We discuss the polymer brush response to confinement by considering variable rates of compression under a hard plane. Our results show a small degree of inter-chain entanglement, regardless of whether the interaction is attractive or merely excluded volume. We observe that the molecular shape depends strongly on the surface coverage. Dense brushes exhibit a limited degree of lateral deformation under compression; instead, chains undergo a transition that produces a local patch with near-solid packing. This effect due to surface density can be undone partially by increasing the attractive nature of the chain interaction, by modulating the rate of compression, or by allowing "soft anchoring", i.e., the possible Brownian drift of the grafting bead on the surface. We have also studied the polymer brush relaxation while maintaining the compressing plane, as well as after its sudden removal. We find evidence that also the relaxation depends on surface density; dense brushes appear to be configurationally frustrated at high compression and are unable to undergo swelling, regardless of the pressure applied.     

Heterogeneous photoredox catalysis using fluorescein polymer brush functionalized glass beads

Photocatalysis is a valuable and versatile method to perform a variety of chemical transformations under ambient temperatures and pressures using mild visible light. This work showcases an example of fluorescein-functionalized polymers grafted to micro-scale glass beads as heterogeneous photoredox catalysts. X-ray photoelectron spectroscopy and thermogravimetric analysis were used to analyze the resulting functional glass beads. Model reactions that are demonstrated include a cyclic condensation and a radical dehalogenation that can both be performed to high yields. Successful recyclability of the fluorescein polymer brush beads is demonstrated with detailed characterization confirming that photocatalytic polymer brushes remain tethered to the surface. As such, this allows for purification and reuse of the heterogeneous photocatalyst beads after simple filtration.     

聚N-异丙基丙烯酰胺接枝聚苯乙烯高分子刷的构象

当长链高分子高密度接枝到一个表面上时,由于分子链间的相互作用使得接枝的高分子链扩张而形成伸直链的构象,这种形态被称为高分子刷.     

Stretching a polymer brush by making in situ cyclodextrin inclusion complexes

The interaction between poly(ethylene oxide) (PEO) chains grafted onto polystyrene latex particles and alpha-, beta-, and gamma-cyclodextrins (CD) was studied by small-angle neutron scattering. The particles were contrast-matched to the solvent in order that only the scattering from the polymer layers was detected. The signal from the layers was fitted to a double-exponential volume fraction profile. The effects of adding cyclodextrin on the polymer profile are shown as a function of cyclodextrin concentration. The polymer layers are seen to extend on addition of CD, which is consistent with a complexation between the grafted PEO and the CD molecules. The effect is the strongest with alpha-CD.     

Electrostatic repulsion between two parallel plates covered with polymer brush layers

An expression for the electrostatic repulsive force is obtained for two parallel similar plates immersed in an electrolyte solution at separation h covered with a uniformly charged polymer brush layer of intact thickness d _o under compression (h<2d _o) after the two brushes come into contact. It is assumed that when the two brushes come into contact, they are squeezed against each other but do not interdigitate. The electrostatic repulsive force is found to increase with decreasing h as 1/h for highly charged brushes and as 1/h ² for weakly charged brushes. This is in contrast to the interaction force between the brush layers before contact (h≥2d _o), which is essentially proportional to exp[−κ(h−2d _o)] (where κ is the Debye–Hückel parameter). It is also shown that the interaction force for highly charged brushes, which becomes independent of the electrolyte concentration, can be comparable in magnitude to the steric repulsive forces between the brushes resulting from osmotic repulsion and the elastic energy of the brushes. Received: 21 October 1998 Accepted in revised form: 25 December 1998     

Fabrication of DNA polymer brush arrays by destructive micropatterning and rolling-circle amplification

A method for fabricating DNA polymer brush arrays using photolithography and plasma etching followed by solid-phase enzymatic DNA amplification is reported. After attaching oligonucleotide primers to the surface of a glass coverslip, a thin layer of photoresist is spin-coated on the glass and patterned via photolithography to generate an array of posts in the resist. An oxygen-based plasma is then used to destroy the exposed oligonucleotide primers. The glass coverslip with the primer array is assembled into a microfluidic chip and DNA polymer brushes are synthesized on the oligonucleotide array by rolling-circle DNA amplification. We have demonstrated that the linear polymers can be rapidly synthesized in situ with a high degree of control over their density and length.